ARM: tegra: remove "0, " from DT unit addresses
Apparently the unit address in a DT node name is now supposed to be a
single integer value, rather than a comma-separated list of individual
cell values. Fix the U-Boot DTs to comply with this naming convention.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/dts/tegra210.dtsi b/arch/arm/dts/tegra210.dtsi
index a8c2f19..fd4cc79 100644
--- a/arch/arm/dts/tegra210.dtsi
+++ b/arch/arm/dts/tegra210.dtsi
@@ -12,7 +12,7 @@
#address-cells = <2>;
#size-cells = <2>;
- pcie-controller@0,01003000 {
+ pcie-controller@01003000 {
compatible = "nvidia,tegra210-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
@@ -78,7 +78,7 @@
};
};
- gic: interrupt-controller@0,50041000 {
+ gic: interrupt-controller@50041000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
@@ -91,14 +91,14 @@
interrupt-parent = <&gic>;
};
- tegra_car: clock@0,60006000 {
+ tegra_car: clock@60006000 {
compatible = "nvidia,tegra210-car";
reg = <0x0 0x60006000 0x0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
- gpio: gpio@0,6000d000 {
+ gpio: gpio@6000d000 {
compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
reg = <0x0 0x6000d000 0x0 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -115,7 +115,7 @@
interrupt-controller;
};
- i2c@0,7000c000 {
+ i2c@7000c000 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c000 0x0 0x100>;
interrupts = <0 38 0x04>;
@@ -125,7 +125,7 @@
status = "disabled";
};
- i2c@0,7000c400 {
+ i2c@7000c400 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c400 0x0 0x100>;
interrupts = <0 84 0x04>;
@@ -135,7 +135,7 @@
status = "disabled";
};
- i2c@0,7000c500 {
+ i2c@7000c500 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c500 0x0 0x100>;
interrupts = <0 92 0x04>;
@@ -145,7 +145,7 @@
status = "disabled";
};
- i2c@0,7000c700 {
+ i2c@7000c700 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c700 0x0 0x100>;
interrupts = <0 120 0x04>;
@@ -155,7 +155,7 @@
status = "disabled";
};
- i2c@0,7000d000 {
+ i2c@7000d000 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000d000 0x0 0x100>;
interrupts = <0 53 0x04>;
@@ -165,7 +165,7 @@
status = "disabled";
};
- i2c@0,7000d100 {
+ i2c@7000d100 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000d100 0x0 0x100>;
interrupts = <0 53 0x04>;
@@ -175,7 +175,7 @@
status = "disabled";
};
- uarta: serial@0,70006000 {
+ uarta: serial@70006000 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006000 0x0 0x40>;
reg-shift = <2>;
@@ -186,7 +186,7 @@
status = "disabled";
};
- uartb: serial@0,70006040 {
+ uartb: serial@70006040 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006040 0x0 0x40>;
reg-shift = <2>;
@@ -197,7 +197,7 @@
status = "disabled";
};
- uartc: serial@0,70006200 {
+ uartc: serial@70006200 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006200 0x0 0x40>;
reg-shift = <2>;
@@ -208,7 +208,7 @@
status = "disabled";
};
- uartd: serial@0,70006300 {
+ uartd: serial@70006300 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006300 0x0 0x40>;
reg-shift = <2>;
@@ -219,7 +219,7 @@
status = "disabled";
};
- spi@0,7000d400 {
+ spi@7000d400 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000d400 0x0 0x200>;
interrupts = <0 59 0x04>;
@@ -231,7 +231,7 @@
status = "disabled";
};
- spi@0,7000d600 {
+ spi@7000d600 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000d600 0x0 0x200>;
interrupts = <0 82 0x04>;
@@ -243,7 +243,7 @@
status = "disabled";
};
- spi@0,7000d800 {
+ spi@7000d800 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000d800 0x0 0x200>;
interrupts = <0 83 0x04>;
@@ -255,7 +255,7 @@
status = "disabled";
};
- spi@0,7000da00 {
+ spi@7000da00 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000da00 0x0 0x200>;
interrupts = <0 93 0x04>;
@@ -267,7 +267,7 @@
status = "disabled";
};
- spi@0,70410000 {
+ spi@70410000 {
compatible = "nvidia,tegra210-qspi";
reg = <0x0 0x70410000 0x0 0x1000>;
interrupts = <0 10 0x04>;
@@ -277,7 +277,7 @@
status = "disabled";
};
- padctl: padctl@0,7009f000 {
+ padctl: padctl@7009f000 {
compatible = "nvidia,tegra210-xusb-padctl";
reg = <0x0 0x7009f000 0x0 0x1000>;
resets = <&tegra_car 142>;
@@ -285,7 +285,7 @@
#phy-cells = <1>;
};
- sdhci@0,700b0000 {
+ sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <0 14 0x04>;
@@ -295,7 +295,7 @@
status = "disabled";
};
- sdhci@0,700b0200 {
+ sdhci@700b0200 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0200 0x0 0x200>;
interrupts = <0 15 0x04>;
@@ -305,7 +305,7 @@
status = "disabled";
};
- sdhci@0,700b0400 {
+ sdhci@700b0400 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0400 0x0 0x200>;
interrupts = <0 19 0x04>;
@@ -315,7 +315,7 @@
status = "disabled";
};
- sdhci@0,700b0600 {
+ sdhci@700b0600 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0600 0x0 0x200>;
interrupts = <0 31 0x04>;
@@ -325,7 +325,7 @@
status = "disabled";
};
- usb@0,7d000000 {
+ usb@7d000000 {
compatible = "nvidia,tegra210-ehci";
reg = <0x0 0x7d000000 0x0 0x4000>;
interrupts = <0 20 0x04>;
@@ -336,7 +336,7 @@
status = "disabled";
};
- usb@0,7d004000 {
+ usb@7d004000 {
compatible = "nvidia,tegra210-ehci";
reg = <0x0 0x7d004000 0x0 0x4000>;
interrupts = < 53 >;