| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2011, Marvell Semiconductor Inc. |
| * Lei Wen <leiwen@marvell.com> |
| * |
| * Back ported to the 8xx platform (from the 8260 platform) by |
| * Murray.Jensen@cmst.csiro.au, 27-Jan-01. |
| */ |
| #ifndef __SDHCI_HW_H |
| #define __SDHCI_HW_H |
| |
| #include <linux/bitops.h> |
| #include <linux/types.h> |
| #include <asm/io.h> |
| #include <mmc.h> |
| #include <asm/gpio.h> |
| |
| /* |
| * Controller registers |
| */ |
| |
| #define SDHCI_DMA_ADDRESS 0x00 |
| |
| #define SDHCI_BLOCK_SIZE 0x04 |
| #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) |
| |
| #define SDHCI_BLOCK_COUNT 0x06 |
| |
| #define SDHCI_ARGUMENT 0x08 |
| |
| #define SDHCI_TRANSFER_MODE 0x0C |
| #define SDHCI_TRNS_DMA BIT(0) |
| #define SDHCI_TRNS_BLK_CNT_EN BIT(1) |
| #define SDHCI_TRNS_ACMD12 BIT(2) |
| #define SDHCI_TRNS_READ BIT(4) |
| #define SDHCI_TRNS_MULTI BIT(5) |
| |
| #define SDHCI_COMMAND 0x0E |
| #define SDHCI_CMD_RESP_MASK 0x03 |
| #define SDHCI_CMD_CRC 0x08 |
| #define SDHCI_CMD_INDEX 0x10 |
| #define SDHCI_CMD_DATA 0x20 |
| #define SDHCI_CMD_ABORTCMD 0xC0 |
| |
| #define SDHCI_CMD_RESP_NONE 0x00 |
| #define SDHCI_CMD_RESP_LONG 0x01 |
| #define SDHCI_CMD_RESP_SHORT 0x02 |
| #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 |
| |
| #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) |
| #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) |
| |
| #define SDHCI_RESPONSE 0x10 |
| |
| #define SDHCI_BUFFER 0x20 |
| |
| #define SDHCI_PRESENT_STATE 0x24 |
| #define SDHCI_CMD_INHIBIT BIT(0) |
| #define SDHCI_DATA_INHIBIT BIT(1) |
| #define SDHCI_DAT_ACTIVE BIT(2) |
| #define SDHCI_DOING_WRITE BIT(8) |
| #define SDHCI_DOING_READ BIT(9) |
| #define SDHCI_SPACE_AVAILABLE BIT(10) |
| #define SDHCI_DATA_AVAILABLE BIT(11) |
| #define SDHCI_CARD_PRESENT BIT(16) |
| #define SDHCI_CARD_STATE_STABLE BIT(17) |
| #define SDHCI_CARD_DETECT_PIN_LEVEL BIT(18) |
| #define SDHCI_WRITE_PROTECT BIT(19) |
| #define SDHCI_DATA_LVL_MASK 0x00F00000 |
| #define SDHCI_DATA_0_LVL_MASK BIT(20) |
| |
| #define SDHCI_HOST_CONTROL 0x28 |
| #define SDHCI_CTRL_LED BIT(0) |
| #define SDHCI_CTRL_4BITBUS BIT(1) |
| #define SDHCI_CTRL_HISPD BIT(2) |
| #define SDHCI_CTRL_DMA_MASK 0x18 |
| #define SDHCI_CTRL_SDMA 0x00 |
| #define SDHCI_CTRL_ADMA1 0x08 |
| #define SDHCI_CTRL_ADMA32 0x10 |
| #define SDHCI_CTRL_ADMA64 0x18 |
| #define SDHCI_CTRL_8BITBUS BIT(5) |
| #define SDHCI_CTRL_CD_TEST_INS BIT(6) |
| #define SDHCI_CTRL_CD_TEST BIT(7) |
| |
| #define SDHCI_POWER_CONTROL 0x29 |
| #define SDHCI_POWER_ON 0x01 |
| #define SDHCI_POWER_180 0x0A |
| #define SDHCI_POWER_300 0x0C |
| #define SDHCI_POWER_330 0x0E |
| |
| #define SDHCI_BLOCK_GAP_CONTROL 0x2A |
| |
| #define SDHCI_WAKE_UP_CONTROL 0x2B |
| #define SDHCI_WAKE_ON_INT BIT(0) |
| #define SDHCI_WAKE_ON_INSERT BIT(1) |
| #define SDHCI_WAKE_ON_REMOVE BIT(2) |
| |
| #define SDHCI_CLOCK_CONTROL 0x2C |
| #define SDHCI_DIVIDER_SHIFT 8 |
| #define SDHCI_DIVIDER_HI_SHIFT 6 |
| #define SDHCI_DIV_MASK 0xFF |
| #define SDHCI_DIV_MASK_LEN 8 |
| #define SDHCI_DIV_HI_MASK 0x300 |
| #define SDHCI_PROG_CLOCK_MODE BIT(5) |
| #define SDHCI_CLOCK_CARD_EN BIT(2) |
| #define SDHCI_CLOCK_INT_STABLE BIT(1) |
| #define SDHCI_CLOCK_INT_EN BIT(0) |
| |
| #define SDHCI_TIMEOUT_CONTROL 0x2E |
| |
| #define SDHCI_SOFTWARE_RESET 0x2F |
| #define SDHCI_RESET_ALL 0x01 |
| #define SDHCI_RESET_CMD 0x02 |
| #define SDHCI_RESET_DATA 0x04 |
| |
| #define SDHCI_INT_STATUS 0x30 |
| #define SDHCI_INT_ENABLE 0x34 |
| #define SDHCI_SIGNAL_ENABLE 0x38 |
| #define SDHCI_INT_RESPONSE BIT(0) |
| #define SDHCI_INT_DATA_END BIT(1) |
| #define SDHCI_INT_DMA_END BIT(3) |
| #define SDHCI_INT_SPACE_AVAIL BIT(4) |
| #define SDHCI_INT_DATA_AVAIL BIT(5) |
| #define SDHCI_INT_CARD_INSERT BIT(6) |
| #define SDHCI_INT_CARD_REMOVE BIT(7) |
| #define SDHCI_INT_CARD_INT BIT(8) |
| #define SDHCI_INT_ERROR BIT(15) |
| #define SDHCI_INT_TIMEOUT BIT(16) |
| #define SDHCI_INT_CRC BIT(17) |
| #define SDHCI_INT_END_BIT BIT(18) |
| #define SDHCI_INT_INDEX BIT(19) |
| #define SDHCI_INT_DATA_TIMEOUT BIT(20) |
| #define SDHCI_INT_DATA_CRC BIT(21) |
| #define SDHCI_INT_DATA_END_BIT BIT(22) |
| #define SDHCI_INT_BUS_POWER BIT(23) |
| #define SDHCI_INT_ACMD12ERR BIT(24) |
| #define SDHCI_INT_ADMA_ERROR BIT(25) |
| |
| #define SDHCI_INT_NORMAL_MASK 0x00007FFF |
| #define SDHCI_INT_ERROR_MASK 0xFFFF8000 |
| |
| #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ |
| SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) |
| #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ |
| SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ |
| SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ |
| SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR) |
| #define SDHCI_INT_ALL_MASK ((unsigned int)-1) |
| |
| #define SDHCI_ACMD12_ERR 0x3C |
| |
| #define SDHCI_HOST_CONTROL2 0x3E |
| #define SDHCI_CTRL_UHS_MASK 0x0007 |
| #define SDHCI_CTRL_UHS_SDR12 0x0000 |
| #define SDHCI_CTRL_UHS_SDR25 0x0001 |
| #define SDHCI_CTRL_UHS_SDR50 0x0002 |
| #define SDHCI_CTRL_UHS_SDR104 0x0003 |
| #define SDHCI_CTRL_UHS_DDR50 0x0004 |
| #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ |
| #define SDHCI_CTRL_VDD_180 0x0008 |
| #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 |
| #define SDHCI_CTRL_DRV_TYPE_B 0x0000 |
| #define SDHCI_CTRL_DRV_TYPE_A 0x0010 |
| #define SDHCI_CTRL_DRV_TYPE_C 0x0020 |
| #define SDHCI_CTRL_DRV_TYPE_D 0x0030 |
| #define SDHCI_CTRL_EXEC_TUNING 0x0040 |
| #define SDHCI_CTRL_TUNED_CLK 0x0080 |
| #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 |
| |
| #define SDHCI_CAPABILITIES 0x40 |
| #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F |
| #define SDHCI_TIMEOUT_CLK_SHIFT 0 |
| #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 |
| #define SDHCI_CLOCK_BASE_MASK 0x00003F00 |
| #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 |
| #define SDHCI_CLOCK_BASE_SHIFT 8 |
| #define SDHCI_MAX_BLOCK_MASK 0x00030000 |
| #define SDHCI_MAX_BLOCK_SHIFT 16 |
| #define SDHCI_CAN_DO_8BIT BIT(18) |
| #define SDHCI_CAN_DO_ADMA2 BIT(19) |
| #define SDHCI_CAN_DO_ADMA1 BIT(20) |
| #define SDHCI_CAN_DO_HISPD BIT(21) |
| #define SDHCI_CAN_DO_SDMA BIT(22) |
| #define SDHCI_CAN_VDD_330 BIT(24) |
| #define SDHCI_CAN_VDD_300 BIT(25) |
| #define SDHCI_CAN_VDD_180 BIT(26) |
| #define SDHCI_CAN_64BIT BIT(28) |
| |
| #define SDHCI_CAPABILITIES_1 0x44 |
| #define SDHCI_SUPPORT_SDR50 0x00000001 |
| #define SDHCI_SUPPORT_SDR104 0x00000002 |
| #define SDHCI_SUPPORT_DDR50 0x00000004 |
| #define SDHCI_SUPPORT_HS400 BIT(31) |
| #define SDHCI_USE_SDR50_TUNING 0x00002000 |
| |
| #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 |
| #define SDHCI_CLOCK_MUL_SHIFT 16 |
| |
| #define SDHCI_MAX_CURRENT 0x48 |
| |
| /* 4C-4F reserved for more max current */ |
| |
| #define SDHCI_SET_ACMD12_ERROR 0x50 |
| #define SDHCI_SET_INT_ERROR 0x52 |
| |
| #define SDHCI_ADMA_ERROR 0x54 |
| |
| /* 55-57 reserved */ |
| |
| #define SDHCI_ADMA_ADDRESS 0x58 |
| #define SDHCI_ADMA_ADDRESS_HI 0x5c |
| |
| /* 60-FB reserved */ |
| |
| #define SDHCI_SLOT_INT_STATUS 0xFC |
| |
| #define SDHCI_HOST_VERSION 0xFE |
| #define SDHCI_VENDOR_VER_MASK 0xFF00 |
| #define SDHCI_VENDOR_VER_SHIFT 8 |
| #define SDHCI_SPEC_VER_MASK 0x00FF |
| #define SDHCI_SPEC_VER_SHIFT 0 |
| #define SDHCI_SPEC_100 0 |
| #define SDHCI_SPEC_200 1 |
| #define SDHCI_SPEC_300 2 |
| |
| #define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK) |
| |
| /* |
| * End of controller registers. |
| */ |
| |
| #define SDHCI_MAX_DIV_SPEC_200 256 |
| #define SDHCI_MAX_DIV_SPEC_300 2046 |
| |
| /* |
| * quirks |
| */ |
| #define SDHCI_QUIRK_32BIT_DMA_ADDR (1 << 0) |
| #define SDHCI_QUIRK_REG32_RW (1 << 1) |
| #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) |
| #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) |
| #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) |
| /* |
| * SDHCI_QUIRK_BROKEN_HISPD_MODE |
| * the hardware cannot operate correctly in high-speed mode, |
| * this quirk forces the sdhci host-controller to non high-speed mode |
| */ |
| #define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5) |
| #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) |
| #define SDHCI_QUIRK_USE_WIDE8 (1 << 8) |
| #define SDHCI_QUIRK_NO_1_8_V (1 << 9) |
| #define SDHCI_QUIRK_SUPPORT_SINGLE (1 << 10) |
| /* Capability register bit-63 indicates HS400 support */ |
| #define SDHCI_QUIRK_CAPS_BIT63_FOR_HS400 BIT(11) |
| |
| /* to make gcc happy */ |
| struct sdhci_host; |
| |
| /* |
| * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. |
| */ |
| #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) |
| #define SDHCI_DEFAULT_BOUNDARY_ARG (7) |
| struct sdhci_ops { |
| #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS |
| u32 (*read_l)(struct sdhci_host *host, int reg); |
| u16 (*read_w)(struct sdhci_host *host, int reg); |
| u8 (*read_b)(struct sdhci_host *host, int reg); |
| void (*write_l)(struct sdhci_host *host, u32 val, int reg); |
| void (*write_w)(struct sdhci_host *host, u16 val, int reg); |
| void (*write_b)(struct sdhci_host *host, u8 val, int reg); |
| #endif |
| int (*get_cd)(struct sdhci_host *host); |
| void (*set_control_reg)(struct sdhci_host *host); |
| int (*set_ios_post)(struct sdhci_host *host); |
| void (*set_clock)(struct sdhci_host *host, u32 div); |
| int (*platform_execute_tuning)(struct mmc *host, u8 opcode); |
| int (*set_delay)(struct sdhci_host *host); |
| /* Callback function to set DLL clock configuration */ |
| int (*config_dll)(struct sdhci_host *host, u32 clock, bool enable); |
| int (*deferred_probe)(struct sdhci_host *host); |
| |
| /** |
| * set_enhanced_strobe() - Set HS400 Enhanced Strobe config |
| * |
| * This is called after setting the card speed and mode to |
| * HS400 ES, and should set any host-specific configuration |
| * necessary for it. |
| * |
| * @host: SDHCI host structure |
| * Return: 0 if successful, -ve on error |
| */ |
| int (*set_enhanced_strobe)(struct sdhci_host *host); |
| |
| #ifdef CONFIG_MMC_SDHCI_ADMA_HELPERS |
| void (*adma_write_desc)(struct sdhci_host *host, void **desc, |
| dma_addr_t addr, int len, bool end); |
| #endif |
| }; |
| |
| #define ADMA_MAX_LEN 65532 |
| #ifdef CONFIG_DMA_ADDR_T_64BIT |
| #define ADMA_DESC_LEN 16 |
| #else |
| #define ADMA_DESC_LEN 8 |
| #endif |
| #define ADMA_TABLE_NO_ENTRIES (CONFIG_SYS_MMC_MAX_BLK_COUNT * \ |
| MMC_MAX_BLOCK_LEN) / ADMA_MAX_LEN |
| |
| #define ADMA_TABLE_SZ (ADMA_TABLE_NO_ENTRIES * ADMA_DESC_LEN) |
| |
| /* Decriptor table defines */ |
| #define ADMA_DESC_ATTR_VALID BIT(0) |
| #define ADMA_DESC_ATTR_END BIT(1) |
| #define ADMA_DESC_ATTR_INT BIT(2) |
| #define ADMA_DESC_ATTR_ACT1 BIT(4) |
| #define ADMA_DESC_ATTR_ACT2 BIT(5) |
| |
| #define ADMA_DESC_TRANSFER_DATA ADMA_DESC_ATTR_ACT2 |
| #define ADMA_DESC_LINK_DESC (ADMA_DESC_ATTR_ACT1 | ADMA_DESC_ATTR_ACT2) |
| |
| struct sdhci_adma_desc { |
| u8 attr; |
| u8 reserved; |
| u16 len; |
| u32 addr_lo; |
| #ifdef CONFIG_DMA_ADDR_T_64BIT |
| u32 addr_hi; |
| #endif |
| } __packed; |
| |
| struct sdhci_host { |
| const char *name; |
| void *ioaddr; |
| unsigned int quirks; |
| unsigned int host_caps; |
| unsigned int version; |
| unsigned int max_clk; /* Maximum Base Clock frequency */ |
| unsigned int clk_mul; /* Clock Multiplier value */ |
| unsigned int clock; |
| struct mmc *mmc; |
| const struct sdhci_ops *ops; |
| int index; |
| |
| int bus_width; |
| struct gpio_desc pwr_gpio; /* Power GPIO */ |
| struct gpio_desc cd_gpio; /* Card Detect GPIO */ |
| |
| uint voltages; |
| |
| struct mmc_config cfg; |
| void *align_buffer; |
| bool force_align_buffer; |
| dma_addr_t start_addr; |
| int flags; |
| #define USE_SDMA (0x1 << 0) |
| #define USE_ADMA (0x1 << 1) |
| #define USE_ADMA64 (0x1 << 2) |
| #define USE_DMA (USE_SDMA | USE_ADMA | USE_ADMA64) |
| dma_addr_t adma_addr; |
| #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA) |
| struct sdhci_adma_desc *adma_desc_table; |
| #endif |
| }; |
| |
| #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS |
| |
| static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
| { |
| if (unlikely(host->ops->write_l)) |
| host->ops->write_l(host, val, reg); |
| else |
| writel(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| if (unlikely(host->ops->write_w)) |
| host->ops->write_w(host, val, reg); |
| else |
| writew(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| if (unlikely(host->ops->write_b)) |
| host->ops->write_b(host, val, reg); |
| else |
| writeb(val, host->ioaddr + reg); |
| } |
| |
| static inline u32 sdhci_readl(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(host->ops->read_l)) |
| return host->ops->read_l(host, reg); |
| else |
| return readl(host->ioaddr + reg); |
| } |
| |
| static inline u16 sdhci_readw(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(host->ops->read_w)) |
| return host->ops->read_w(host, reg); |
| else |
| return readw(host->ioaddr + reg); |
| } |
| |
| static inline u8 sdhci_readb(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(host->ops->read_b)) |
| return host->ops->read_b(host, reg); |
| else |
| return readb(host->ioaddr + reg); |
| } |
| |
| #else |
| |
| static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
| { |
| writel(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
| { |
| writew(val, host->ioaddr + reg); |
| } |
| |
| static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
| { |
| writeb(val, host->ioaddr + reg); |
| } |
| static inline u32 sdhci_readl(struct sdhci_host *host, int reg) |
| { |
| return readl(host->ioaddr + reg); |
| } |
| |
| static inline u16 sdhci_readw(struct sdhci_host *host, int reg) |
| { |
| return readw(host->ioaddr + reg); |
| } |
| |
| static inline u8 sdhci_readb(struct sdhci_host *host, int reg) |
| { |
| return readb(host->ioaddr + reg); |
| } |
| #endif |
| |
| #ifdef CONFIG_BLK |
| /** |
| * sdhci_setup_cfg() - Set up the configuration for DWMMC |
| * |
| * This is used to set up an SDHCI device when you are using CONFIG_BLK. |
| * |
| * This should be called from your MMC driver's probe() method once you have |
| * the information required. |
| * |
| * Generally your driver will have a platform data structure which holds both |
| * the configuration (struct mmc_config) and the MMC device info (struct mmc). |
| * For example: |
| * |
| * struct msm_sdhc_plat { |
| * struct mmc_config cfg; |
| * struct mmc mmc; |
| * }; |
| * |
| * ... |
| * |
| * Inside U_BOOT_DRIVER(): |
| * .plat_auto = sizeof(struct msm_sdhc_plat), |
| * |
| * To access platform data: |
| * struct msm_sdhc_plat *plat = dev_get_plat(dev); |
| * |
| * See msm_sdhci.c for an example. |
| * |
| * @cfg: Configuration structure to fill in (generally &plat->mmc) |
| * @host: SDHCI host structure |
| * @f_max: Maximum supported clock frequency in HZ (0 for default) |
| * @f_min: Minimum supported clock frequency in HZ (0 for default) |
| */ |
| int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, |
| u32 f_max, u32 f_min); |
| |
| /** |
| * sdhci_bind() - Set up a new MMC block device |
| * |
| * This is used to set up an SDHCI block device when you are using CONFIG_BLK. |
| * It should be called from your driver's bind() method. |
| * |
| * See msm_sdhci.c for an example. |
| * |
| * @dev: Device to set up |
| * @mmc: Pointer to mmc structure (normally &plat->mmc) |
| * @cfg: Empty configuration structure (generally &plat->cfg). This is |
| * normally all zeroes at this point. The only purpose of passing |
| * this in is to set mmc->cfg to it. |
| * Return: 0 if OK, -ve if the block device could not be created |
| */ |
| int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); |
| #else |
| |
| /** |
| * add_sdhci() - Add a new SDHCI interface |
| * |
| * This is used when you are not using CONFIG_BLK. Convert your driver over! |
| * |
| * @host: SDHCI host structure |
| * @f_max: Maximum supported clock frequency in HZ (0 for default) |
| * @f_min: Minimum supported clock frequency in HZ (0 for default) |
| * Return: 0 if OK, -ve on error |
| */ |
| int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min); |
| #endif /* !CONFIG_BLK */ |
| |
| void sdhci_set_uhs_timing(struct sdhci_host *host); |
| #ifdef CONFIG_DM_MMC |
| /* Export the operations to drivers */ |
| int sdhci_probe(struct udevice *dev); |
| int sdhci_set_clock(struct mmc *mmc, unsigned int clock); |
| |
| /** |
| * sdhci_set_control_reg - Set control registers |
| * |
| * This is used set up control registers for voltage level and UHS speed |
| * mode. |
| * |
| * @host: SDHCI host structure |
| */ |
| void sdhci_set_control_reg(struct sdhci_host *host); |
| extern const struct dm_mmc_ops sdhci_ops; |
| #else |
| #endif |
| |
| void sdhci_adma_write_desc(struct sdhci_host *host, void **next_desc, |
| dma_addr_t addr, int len, bool end); |
| struct sdhci_adma_desc *sdhci_adma_init(void); |
| void sdhci_prepare_adma_table(struct sdhci_host *host, |
| struct sdhci_adma_desc *table, |
| struct mmc_data *data, dma_addr_t start_addr); |
| |
| #endif /* __SDHCI_HW_H */ |