diff --git a/arch/arm/cpu/armv7/mx7ulp/Makefile b/arch/arm/cpu/armv7/mx7ulp/Makefile
index be038e7..6f37e8c 100644
--- a/arch/arm/cpu/armv7/mx7ulp/Makefile
+++ b/arch/arm/cpu/armv7/mx7ulp/Makefile
@@ -5,4 +5,4 @@
 #
 #
 
-obj-y	:= iomux.o
+obj-y	:= clock.o iomux.o pcc.o scg.o
diff --git a/arch/arm/cpu/armv7/mx7ulp/clock.c b/arch/arm/cpu/armv7/mx7ulp/clock.c
new file mode 100644
index 0000000..e6225bb
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7ulp/clock.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC
+#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC0_RBASE
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC1_RBASE
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#endif
+#endif
+	return 0;
+}
+
+static u32 get_fast_plat_clk(void)
+{
+	return scg_clk_get_rate(SCG_NIC0_CLK);
+}
+
+static u32 get_slow_plat_clk(void)
+{
+	return scg_clk_get_rate(SCG_NIC1_CLK);
+}
+
+static u32 get_ipg_clk(void)
+{
+	return scg_clk_get_rate(SCG_NIC1_BUS_CLK);
+}
+
+u32 get_lpuart_clk(void)
+{
+	int index = 0;
+
+	const u32 lpuart_array[] = {
+		LPUART0_RBASE,
+		LPUART1_RBASE,
+		LPUART2_RBASE,
+		LPUART3_RBASE,
+		LPUART4_RBASE,
+		LPUART5_RBASE,
+		LPUART6_RBASE,
+		LPUART7_RBASE,
+	};
+
+	const enum pcc_clk lpuart_pcc_clks[] = {
+		PER_CLK_LPUART4,
+		PER_CLK_LPUART5,
+		PER_CLK_LPUART6,
+		PER_CLK_LPUART7,
+	};
+
+	for (index = 0; index < 8; index++) {
+		if (lpuart_array[index] == LPUART_BASE)
+			break;
+	}
+
+	if (index < 4 || index > 7)
+		return 0;
+
+	return pcc_clock_get_rate(lpuart_pcc_clks[index - 4]);
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return scg_clk_get_rate(SCG_CORE_CLK);
+	case MXC_AXI_CLK:
+		return get_fast_plat_clk();
+	case MXC_AHB_CLK:
+		return get_slow_plat_clk();
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_I2C_CLK:
+		return pcc_clock_get_rate(PER_CLK_LPI2C4);
+	case MXC_UART_CLK:
+		return get_lpuart_clk();
+	case MXC_ESDHC_CLK:
+		return pcc_clock_get_rate(PER_CLK_USDHC0);
+	case MXC_ESDHC2_CLK:
+		return pcc_clock_get_rate(PER_CLK_USDHC1);
+	case MXC_DDR_CLK:
+		return scg_clk_get_rate(SCG_DDR_CLK);
+	default:
+		printf("Unsupported mxc_clock %d\n", clk);
+		break;
+	}
+
+	return 0;
+}
+
+void init_clk_usdhc(u32 index)
+{
+	switch (index) {
+	case 0:
+		/*Disable the clock before configure it */
+		pcc_clock_enable(PER_CLK_USDHC0, false);
+
+		/* 158MHz / 1 = 158MHz */
+		pcc_clock_sel(PER_CLK_USDHC0, SCG_NIC1_CLK);
+		pcc_clock_div_config(PER_CLK_USDHC0, false, 1);
+		pcc_clock_enable(PER_CLK_USDHC0, true);
+		break;
+	case 1:
+		/*Disable the clock before configure it */
+		pcc_clock_enable(PER_CLK_USDHC1, false);
+
+		/* 158MHz / 1 = 158MHz */
+		pcc_clock_sel(PER_CLK_USDHC1, SCG_NIC1_CLK);
+		pcc_clock_div_config(PER_CLK_USDHC1, false, 1);
+		pcc_clock_enable(PER_CLK_USDHC1, true);
+		break;
+	default:
+		printf("Invalid index for USDHC %d\n", index);
+		break;
+	}
+}
+
+#ifdef CONFIG_MXC_OCOTP
+
+#define OCOTP_CTRL_PCC1_SLOT		(38)
+#define OCOTP_CTRL_HIGH4K_PCC1_SLOT	(39)
+
+void enable_ocotp_clk(unsigned char enable)
+{
+	u32 val;
+
+	/*
+	 * Seems the OCOTP CLOCKs have been enabled at default,
+	 * check its inuse flag
+	 */
+
+	val = readl(PCC1_RBASE + 4 * OCOTP_CTRL_PCC1_SLOT);
+	if (!(val & PCC_INUSE_MASK))
+		writel(PCC_CGC_MASK, (PCC1_RBASE + 4 * OCOTP_CTRL_PCC1_SLOT));
+
+	val = readl(PCC1_RBASE + 4 * OCOTP_CTRL_HIGH4K_PCC1_SLOT);
+	if (!(val & PCC_INUSE_MASK))
+		writel(PCC_CGC_MASK,
+		       (PCC1_RBASE + 4 * OCOTP_CTRL_HIGH4K_PCC1_SLOT));
+}
+#endif
+
+void enable_usboh3_clk(unsigned char enable)
+{
+	if (enable) {
+		pcc_clock_enable(PER_CLK_USB0, false);
+		pcc_clock_sel(PER_CLK_USB0, SCG_NIC1_BUS_CLK);
+		pcc_clock_enable(PER_CLK_USB0, true);
+
+#ifdef CONFIG_USB_MAX_CONTROLLER_COUNT
+		if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) {
+			pcc_clock_enable(PER_CLK_USB1, false);
+			pcc_clock_sel(PER_CLK_USB1, SCG_NIC1_BUS_CLK);
+			pcc_clock_enable(PER_CLK_USB1, true);
+		}
+#endif
+
+		pcc_clock_enable(PER_CLK_USB_PHY, true);
+		pcc_clock_enable(PER_CLK_USB_PL301, true);
+	} else {
+		pcc_clock_enable(PER_CLK_USB0, false);
+		pcc_clock_enable(PER_CLK_USB1, false);
+		pcc_clock_enable(PER_CLK_USB_PHY, false);
+		pcc_clock_enable(PER_CLK_USB_PL301, false);
+	}
+}
+
+static void lpuart_set_clk(uint32_t index, enum scg_clk clk)
+{
+	const enum pcc_clk lpuart_pcc_clks[] = {
+		PER_CLK_LPUART4,
+		PER_CLK_LPUART5,
+		PER_CLK_LPUART6,
+		PER_CLK_LPUART7,
+	};
+
+	if (index < 4 || index > 7)
+		return;
+
+#ifndef CONFIG_CLK_DEBUG
+	pcc_clock_enable(lpuart_pcc_clks[index - 4], false);
+#endif
+	pcc_clock_sel(lpuart_pcc_clks[index - 4], clk);
+	pcc_clock_enable(lpuart_pcc_clks[index - 4], true);
+}
+
+static void init_clk_lpuart(void)
+{
+	u32 index = 0, i;
+
+	const u32 lpuart_array[] = {
+		LPUART0_RBASE,
+		LPUART1_RBASE,
+		LPUART2_RBASE,
+		LPUART3_RBASE,
+		LPUART4_RBASE,
+		LPUART5_RBASE,
+		LPUART6_RBASE,
+		LPUART7_RBASE,
+	};
+
+	for (i = 0; i < 8; i++) {
+		if (lpuart_array[i] == LPUART_BASE) {
+			index = i;
+			break;
+		}
+	}
+
+	lpuart_set_clk(index, SCG_SOSC_DIV2_CLK);
+}
+
+static void init_clk_rgpio2p(void)
+{
+	/*Enable RGPIO2P1 clock */
+	pcc_clock_enable(PER_CLK_RGPIO2P1, true);
+
+	/*
+	 * Hard code to enable RGPIO2P0 clock since it is not
+	 * in clock frame for A7 domain
+	 */
+	writel(PCC_CGC_MASK, (PCC0_RBASE + 0x3C));
+}
+
+/* Configure PLL/PFD freq */
+void clock_init(void)
+{
+	/*
+	 * ROM has enabled clocks:
+	 * A4 side: SIRC 16Mhz (DIV1-3 off),  FIRC 48Mhz (DIV1-2 on),
+	 *          Non-LP-boot:  SOSC, SPLL PFD0 (scs selected)
+	 * A7 side:  SPLL PFD0 (scs selected, 413Mhz),
+	 *           APLL PFD0 (352Mhz), DDRCLK, all NIC clocks
+	 *           A7 Plat0 (NIC0) = 176Mhz, Plat1 (NIC1) = 176Mhz,
+	 *           IP BUS (NIC1_BUS) = 58.6Mhz
+	 *
+	 * In u-boot:
+	 * 1. Enable PFD1-3 of APLL for A7 side. Enable FIRC and DIVs.
+	 * 2. Enable USB PLL
+	 * 3. Init the clocks of peripherals used in u-boot bu
+	 *    without set rate interface.The clocks for these
+	 *    peripherals are enabled in this intialization.
+	 * 4.Other peripherals with set clock rate interface
+	 *   does not be set in this function.
+	 */
+
+	scg_a7_firc_init();
+
+	scg_a7_soscdiv_init();
+
+	/* APLL PFD1 = 270Mhz, PFD2=480Mhz, PFD3=800Mhz */
+	scg_enable_pll_pfd(SCG_APLL_PFD1_CLK, 35);
+	scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 20);
+	scg_enable_pll_pfd(SCG_APLL_PFD3_CLK, 12);
+
+	init_clk_lpuart();
+
+	init_clk_rgpio2p();
+
+	enable_usboh3_clk(1);
+}
+
+/*
+ * Dump some core clockes.
+ */
+int do_mx7_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u32 addr = 0;
+	u32 freq;
+	freq = decode_pll(PLL_A7_SPLL);
+	printf("PLL_A7_SPLL    %8d MHz\n", freq / 1000000);
+
+	freq = decode_pll(PLL_A7_APLL);
+	printf("PLL_A7_APLL    %8d MHz\n", freq / 1000000);
+
+	freq = decode_pll(PLL_USB);
+	printf("PLL_USB    %8d MHz\n", freq / 1000000);
+
+	printf("\n");
+
+	printf("CORE       %8d kHz\n", scg_clk_get_rate(SCG_CORE_CLK) / 1000);
+	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+	printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
+	printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+	printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
+	printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+	printf("USDHC1     %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
+	printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
+	printf("I2C4       %8d kHz\n", mxc_get_clock(MXC_I2C_CLK) / 1000);
+
+	addr = (u32) clock_init;
+	printf("[%s] addr = 0x%08X\r\n", __func__, addr);
+	scg_a7_info();
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx7_showclocks,
+	"display clocks",
+	""
+);
diff --git a/arch/arm/cpu/armv7/mx7ulp/pcc.c b/arch/arm/cpu/armv7/mx7ulp/pcc.c
new file mode 100644
index 0000000..edd84e5
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7ulp/pcc.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define PCC_CLKSRC_TYPES 2
+#define PCC_CLKSRC_NUM 7
+
+static enum scg_clk pcc_clksrc[PCC_CLKSRC_TYPES][PCC_CLKSRC_NUM] = {
+	{	SCG_NIC1_BUS_CLK,
+		SCG_NIC1_CLK,
+		SCG_DDR_CLK,
+		SCG_APLL_PFD2_CLK,
+		SCG_APLL_PFD1_CLK,
+		SCG_APLL_PFD0_CLK,
+		USB_PLL_OUT,
+	},
+	{	SCG_SOSC_DIV2_CLK,  /* SOSC BUS clock */
+		MIPI_PLL_OUT,
+		SCG_FIRC_DIV2_CLK,  /* FIRC BUS clock */
+		SCG_ROSC_CLK,
+		SCG_NIC1_BUS_CLK,
+		SCG_NIC1_CLK,
+		SCG_APLL_PFD3_CLK,
+	},
+};
+
+static struct pcc_entry pcc_arrays[] = {
+	{PCC2_RBASE, DMA1_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, RGPIO1_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, FLEXBUS0_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, SEMA42_1_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, DMA1_CH_MUX0_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, SNVS_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, CAAM_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, LPTPM4_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPTPM5_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPIT1_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPSPI2_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPSPI3_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPI2C4_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPI2C5_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPUART4_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, LPUART5_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, FLEXIO1_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC2_RBASE, USBOTG0_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, USBOTG1_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, USBPHY_PCC2_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, USB_PL301_PCC2_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC2_RBASE, USDHC0_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, USDHC1_PCC2_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC2_RBASE, WDG1_PCC2_SLOT,		CLKSRC_PER_BUS,	PCC_HAS_DIV},
+	{PCC2_RBASE, WDG2_PCC2_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV},
+
+	{PCC3_RBASE, LPTPM6_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPTPM7_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPI2C6_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPI2C7_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPUART6_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, LPUART7_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_NO_DIV},
+	{PCC3_RBASE, VIU0_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, DSI0_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV},
+	{PCC3_RBASE, LCDIF0_PCC3_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV},
+	{PCC3_RBASE, MMDC0_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTC_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTD_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTE_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, PORTF_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV},
+	{PCC3_RBASE, GPU3D_PCC3_SLOT,		CLKSRC_PER_PLAT, PCC_NO_DIV},
+	{PCC3_RBASE, GPU2D_PCC3_SLOT,		CLKSRC_PER_PLAT, PCC_NO_DIV},
+};
+
+int pcc_clock_enable(enum pcc_clk clk, bool enable)
+{
+	u32 reg, val;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	clk_debug("pcc_clock_enable: clk %d, reg 0x%x, val 0x%x, enable %d\n",
+		  clk, reg, val, enable);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK))
+		return -EPERM;
+
+	if (enable)
+		val |= PCC_CGC_MASK;
+	else
+		val &= ~PCC_CGC_MASK;
+
+	writel(val, reg);
+
+	clk_debug("pcc_clock_enable: val 0x%x\n", val);
+
+	return 0;
+}
+
+/* The clock source select needs clock is disabled */
+int pcc_clock_sel(enum pcc_clk clk, enum scg_clk src)
+{
+	u32 reg, val, i, clksrc_type;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	clksrc_type = pcc_arrays[clk].clksrc;
+	if (clksrc_type >= CLKSRC_NO_PCS) {
+		printf("No PCS field for the PCC %d, clksrc type %d\n",
+		       clk, clksrc_type);
+		return -EPERM;
+	}
+
+	for (i = 0; i < PCC_CLKSRC_NUM; i++) {
+		if (pcc_clksrc[clksrc_type][i] == src) {
+			/* Find the clock src, then set it to PCS */
+			break;
+		}
+	}
+
+	if (i == PCC_CLKSRC_NUM) {
+		printf("Not find the parent scg_clk in PCS of PCC %d, invalid scg_clk %d\n", clk, src);
+		return -EINVAL;
+	}
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	clk_debug("pcc_clock_sel: clk %d, reg 0x%x, val 0x%x, clksrc_type %d\n",
+		  clk, reg, val, clksrc_type);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+	    (val & PCC_CGC_MASK)) {
+		printf("Not permit to select clock source val = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	val &= ~PCC_PCS_MASK;
+	val |= ((i + 1) << PCC_PCS_OFFSET);
+
+	writel(val, reg);
+
+	clk_debug("pcc_clock_sel: val 0x%x\n", val);
+
+	return 0;
+}
+
+int pcc_clock_div_config(enum pcc_clk clk, bool frac, u8 div)
+{
+	u32 reg, val;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays) || div > 8 ||
+	    (div == 1 && frac != 0))
+		return -EINVAL;
+
+	if (pcc_arrays[clk].div >= PCC_NO_DIV) {
+		printf("No DIV/FRAC field for the PCC %d\n", clk);
+		return -EPERM;
+	}
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+	    (val & PCC_CGC_MASK)) {
+		printf("Not permit to set div/frac val = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	if (frac)
+		val |= PCC_FRAC_MASK;
+	else
+		val &= ~PCC_FRAC_MASK;
+
+	val &= ~PCC_PCD_MASK;
+	val |= (div - 1) & PCC_PCD_MASK;
+
+	writel(val, reg);
+
+	return 0;
+}
+
+bool pcc_clock_is_enable(enum pcc_clk clk)
+{
+	u32 reg, val;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+	val = readl(reg);
+
+	if ((val & PCC_INUSE_MASK) || (val & PCC_CGC_MASK))
+		return true;
+
+	return false;
+}
+
+int pcc_clock_get_clksrc(enum pcc_clk clk, enum scg_clk *src)
+{
+	u32 reg, val, clksrc_type;
+
+	if (clk >= ARRAY_SIZE(pcc_arrays))
+		return -EINVAL;
+
+	clksrc_type = pcc_arrays[clk].clksrc;
+	if (clksrc_type >= CLKSRC_NO_PCS) {
+		printf("No PCS field for the PCC %d, clksrc type %d\n",
+		       clk, clksrc_type);
+		return -EPERM;
+	}
+
+	reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+
+	val = readl(reg);
+
+	clk_debug("pcc_clock_get_clksrc: clk %d, reg 0x%x, val 0x%x, type %d\n",
+		  clk, reg, val, clksrc_type);
+
+	if (!(val & PCC_PR_MASK)) {
+		printf("This pcc slot is not present = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	val &= PCC_PCS_MASK;
+	val = (val >> PCC_PCS_OFFSET);
+
+	if (!val) {
+		printf("Clock source is off\n");
+		return -EIO;
+	}
+
+	*src = pcc_clksrc[clksrc_type][val - 1];
+
+	clk_debug("pcc_clock_get_clksrc: parent scg clk %d\n", *src);
+
+	return 0;
+}
+
+u32 pcc_clock_get_rate(enum pcc_clk clk)
+{
+	u32 reg, val, rate, frac, div;
+	enum scg_clk parent;
+	int ret;
+
+	ret = pcc_clock_get_clksrc(clk, &parent);
+	if (ret)
+		return 0;
+
+	rate = scg_clk_get_rate(parent);
+
+	clk_debug("pcc_clock_get_rate: parent rate %u\n", rate);
+
+	if (pcc_arrays[clk].div == PCC_HAS_DIV) {
+		reg = pcc_arrays[clk].pcc_base + pcc_arrays[clk].pcc_slot * 4;
+		val = readl(reg);
+
+		frac = (val & PCC_FRAC_MASK) >> PCC_FRAC_OFFSET;
+		div = (val & PCC_PCD_MASK) >> PCC_PCD_OFFSET;
+
+		/*
+		 * Theoretically don't have overflow in the calc,
+		 * the rate won't exceed 2G
+		 */
+		rate = rate * (frac + 1) / (div + 1);
+	}
+
+	clk_debug("pcc_clock_get_rate: rate %u\n", rate);
+	return rate;
+}
diff --git a/arch/arm/cpu/armv7/mx7ulp/scg.c b/arch/arm/cpu/armv7/mx7ulp/scg.c
new file mode 100644
index 0000000..ca8252d
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7ulp/scg.c
@@ -0,0 +1,1086 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+scg_p scg1_regs = (scg_p)SCG1_RBASE;
+
+static u32 scg_src_get_rate(enum scg_clk clksrc)
+{
+	u32 reg;
+
+	switch (clksrc) {
+	case SCG_SOSC_CLK:
+		reg = readl(&scg1_regs->sosccsr);
+		if (!(reg & SCG_SOSC_CSR_SOSCVLD_MASK))
+			return 0;
+
+		return 24000000;
+	case SCG_FIRC_CLK:
+		reg = readl(&scg1_regs->firccsr);
+		if (!(reg & SCG_FIRC_CSR_FIRCVLD_MASK))
+			return 0;
+
+		return 48000000;
+	case SCG_SIRC_CLK:
+		reg = readl(&scg1_regs->sirccsr);
+		if (!(reg & SCG_SIRC_CSR_SIRCVLD_MASK))
+			return 0;
+
+		return 16000000;
+	case SCG_ROSC_CLK:
+		reg = readl(&scg1_regs->rtccsr);
+		if (!(reg & SCG_ROSC_CSR_ROSCVLD_MASK))
+			return 0;
+
+		return 32768;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static u32 scg_sircdiv_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	switch (clk) {
+	case SCG_SIRC_DIV1_CLK:
+		mask = SCG_SIRCDIV_DIV1_MASK;
+		shift = SCG_SIRCDIV_DIV1_SHIFT;
+		break;
+	case SCG_SIRC_DIV2_CLK:
+		mask = SCG_SIRCDIV_DIV2_MASK;
+		shift = SCG_SIRCDIV_DIV2_SHIFT;
+		break;
+	case SCG_SIRC_DIV3_CLK:
+		mask = SCG_SIRCDIV_DIV3_MASK;
+		shift = SCG_SIRCDIV_DIV3_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->sirccsr);
+	if (!(reg & SCG_SIRC_CSR_SIRCVLD_MASK))
+		return 0;
+
+	reg = readl(&scg1_regs->sircdiv);
+	val = (reg & mask) >> shift;
+
+	if (!val) /*clock disabled*/
+		return 0;
+
+	rate = scg_src_get_rate(SCG_SIRC_CLK);
+	rate = rate / (1 << (val - 1));
+
+	return rate;
+}
+
+static u32 scg_fircdiv_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	switch (clk) {
+	case SCG_FIRC_DIV1_CLK:
+		mask = SCG_FIRCDIV_DIV1_MASK;
+		shift = SCG_FIRCDIV_DIV1_SHIFT;
+		break;
+	case SCG_FIRC_DIV2_CLK:
+		mask = SCG_FIRCDIV_DIV2_MASK;
+		shift = SCG_FIRCDIV_DIV2_SHIFT;
+		break;
+	case SCG_FIRC_DIV3_CLK:
+		mask = SCG_FIRCDIV_DIV3_MASK;
+		shift = SCG_FIRCDIV_DIV3_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->firccsr);
+	if (!(reg & SCG_FIRC_CSR_FIRCVLD_MASK))
+		return 0;
+
+	reg = readl(&scg1_regs->fircdiv);
+	val = (reg & mask) >> shift;
+
+	if (!val) /*clock disabled*/
+		return 0;
+
+	rate = scg_src_get_rate(SCG_FIRC_CLK);
+	rate = rate / (1 << (val - 1));
+
+	return rate;
+}
+
+static u32 scg_soscdiv_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	switch (clk) {
+	case SCG_SOSC_DIV1_CLK:
+		mask = SCG_SOSCDIV_DIV1_MASK;
+		shift = SCG_SOSCDIV_DIV1_SHIFT;
+		break;
+	case SCG_SOSC_DIV2_CLK:
+		mask = SCG_SOSCDIV_DIV2_MASK;
+		shift = SCG_SOSCDIV_DIV2_SHIFT;
+		break;
+	case SCG_SOSC_DIV3_CLK:
+		mask = SCG_SOSCDIV_DIV3_MASK;
+		shift = SCG_SOSCDIV_DIV3_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->sosccsr);
+	if (!(reg & SCG_SOSC_CSR_SOSCVLD_MASK))
+		return 0;
+
+	reg = readl(&scg1_regs->soscdiv);
+	val = (reg & mask) >> shift;
+
+	if (!val) /*clock disabled*/
+		return 0;
+
+	rate = scg_src_get_rate(SCG_SOSC_CLK);
+	rate = rate / (1 << (val - 1));
+
+	return rate;
+}
+
+static u32 scg_apll_pfd_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask, gate, valid;
+
+	switch (clk) {
+	case SCG_APLL_PFD0_CLK:
+		gate = SCG_PLL_PFD0_GATE_MASK;
+		valid = SCG_PLL_PFD0_VALID_MASK;
+		mask = SCG_PLL_PFD0_FRAC_MASK;
+		shift = SCG_PLL_PFD0_FRAC_SHIFT;
+		break;
+	case SCG_APLL_PFD1_CLK:
+		gate = SCG_PLL_PFD1_GATE_MASK;
+		valid = SCG_PLL_PFD1_VALID_MASK;
+		mask = SCG_PLL_PFD1_FRAC_MASK;
+		shift = SCG_PLL_PFD1_FRAC_SHIFT;
+		break;
+	case SCG_APLL_PFD2_CLK:
+		gate = SCG_PLL_PFD2_GATE_MASK;
+		valid = SCG_PLL_PFD2_VALID_MASK;
+		mask = SCG_PLL_PFD2_FRAC_MASK;
+		shift = SCG_PLL_PFD2_FRAC_SHIFT;
+		break;
+	case SCG_APLL_PFD3_CLK:
+		gate = SCG_PLL_PFD3_GATE_MASK;
+		valid = SCG_PLL_PFD3_VALID_MASK;
+		mask = SCG_PLL_PFD3_FRAC_MASK;
+		shift = SCG_PLL_PFD3_FRAC_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->apllpfd);
+	if (reg & gate || !(reg & valid))
+		return 0;
+
+	clk_debug("scg_apll_pfd_get_rate reg 0x%x\n", reg);
+
+	val = (reg & mask) >> shift;
+	rate = decode_pll(PLL_A7_APLL);
+
+	rate = rate / val * 18;
+
+	clk_debug("scg_apll_pfd_get_rate rate %u\n", rate);
+
+	return rate;
+}
+
+static u32 scg_spll_pfd_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask, gate, valid;
+
+	switch (clk) {
+	case SCG_SPLL_PFD0_CLK:
+		gate = SCG_PLL_PFD0_GATE_MASK;
+		valid = SCG_PLL_PFD0_VALID_MASK;
+		mask = SCG_PLL_PFD0_FRAC_MASK;
+		shift = SCG_PLL_PFD0_FRAC_SHIFT;
+		break;
+	case SCG_SPLL_PFD1_CLK:
+		gate = SCG_PLL_PFD1_GATE_MASK;
+		valid = SCG_PLL_PFD1_VALID_MASK;
+		mask = SCG_PLL_PFD1_FRAC_MASK;
+		shift = SCG_PLL_PFD1_FRAC_SHIFT;
+		break;
+	case SCG_SPLL_PFD2_CLK:
+		gate = SCG_PLL_PFD2_GATE_MASK;
+		valid = SCG_PLL_PFD2_VALID_MASK;
+		mask = SCG_PLL_PFD2_FRAC_MASK;
+		shift = SCG_PLL_PFD2_FRAC_SHIFT;
+		break;
+	case SCG_SPLL_PFD3_CLK:
+		gate = SCG_PLL_PFD3_GATE_MASK;
+		valid = SCG_PLL_PFD3_VALID_MASK;
+		mask = SCG_PLL_PFD3_FRAC_MASK;
+		shift = SCG_PLL_PFD3_FRAC_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&scg1_regs->spllpfd);
+	if (reg & gate || !(reg & valid))
+		return 0;
+
+	clk_debug("scg_spll_pfd_get_rate reg 0x%x\n", reg);
+
+	val = (reg & mask) >> shift;
+	rate = decode_pll(PLL_A7_SPLL);
+
+	rate = rate / val * 18;
+
+	clk_debug("scg_spll_pfd_get_rate rate %u\n", rate);
+
+	return rate;
+}
+
+static u32 scg_apll_get_rate(void)
+{
+	u32 reg, val, rate;
+
+	reg = readl(&scg1_regs->apllcfg);
+	val = (reg & SCG_PLL_CFG_PLLSEL_MASK) >> SCG_PLL_CFG_PLLSEL_SHIFT;
+
+	if (!val) {
+		/* APLL clock after two dividers */
+		rate = decode_pll(PLL_A7_APLL);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV1_MASK) >>
+			SCG_PLL_CFG_POSTDIV1_SHIFT;
+		rate = rate / (val + 1);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV2_MASK) >>
+			SCG_PLL_CFG_POSTDIV2_SHIFT;
+		rate = rate / (val + 1);
+	} else {
+		/* APLL PFD clock */
+		val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >>
+			SCG_PLL_CFG_PFDSEL_SHIFT;
+		rate = scg_apll_pfd_get_rate(SCG_APLL_PFD0_CLK + val);
+	}
+
+	return rate;
+}
+
+static u32 scg_spll_get_rate(void)
+{
+	u32 reg, val, rate;
+
+	reg = readl(&scg1_regs->spllcfg);
+	val = (reg & SCG_PLL_CFG_PLLSEL_MASK) >> SCG_PLL_CFG_PLLSEL_SHIFT;
+
+	clk_debug("scg_spll_get_rate reg 0x%x\n", reg);
+
+	if (!val) {
+		/* APLL clock after two dividers */
+		rate = decode_pll(PLL_A7_SPLL);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV1_MASK) >>
+			SCG_PLL_CFG_POSTDIV1_SHIFT;
+		rate = rate / (val + 1);
+
+		val = (reg & SCG_PLL_CFG_POSTDIV2_MASK) >>
+			SCG_PLL_CFG_POSTDIV2_SHIFT;
+		rate = rate / (val + 1);
+
+		clk_debug("scg_spll_get_rate SPLL %u\n", rate);
+
+	} else {
+		/* APLL PFD clock */
+		val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >>
+			SCG_PLL_CFG_PFDSEL_SHIFT;
+		rate = scg_spll_pfd_get_rate(SCG_SPLL_PFD0_CLK + val);
+
+		clk_debug("scg_spll_get_rate PFD %u\n", rate);
+	}
+
+	return rate;
+}
+
+static u32 scg_ddr_get_rate(void)
+{
+	u32 reg, val, rate, div;
+
+	reg = readl(&scg1_regs->ddrccr);
+	val = (reg & SCG_DDRCCR_DDRCS_MASK) >> SCG_DDRCCR_DDRCS_SHIFT;
+	div = (reg & SCG_DDRCCR_DDRDIV_MASK) >> SCG_DDRCCR_DDRDIV_SHIFT;
+
+	if (!div)
+		return 0;
+
+	if (!val) {
+		reg = readl(&scg1_regs->apllcfg);
+		val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >>
+			SCG_PLL_CFG_PFDSEL_SHIFT;
+		rate = scg_apll_pfd_get_rate(SCG_APLL_PFD0_CLK + val);
+	} else {
+		rate = decode_pll(PLL_USB);
+	}
+
+	rate = rate / (1 << (div - 1));
+	return rate;
+}
+
+static u32 scg_nic_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+	u32 shift, mask;
+
+	reg = readl(&scg1_regs->niccsr);
+	val = (reg & SCG_NICCSR_NICCS_MASK) >> SCG_NICCSR_NICCS_SHIFT;
+
+	clk_debug("scg_nic_get_rate niccsr 0x%x\n", reg);
+
+	if (!val)
+		rate = scg_src_get_rate(SCG_FIRC_CLK);
+	else
+		rate = scg_ddr_get_rate();
+
+	clk_debug("scg_nic_get_rate parent rate %u\n", rate);
+
+	val = (reg & SCG_NICCSR_NIC0DIV_MASK) >> SCG_NICCSR_NIC0DIV_SHIFT;
+
+	rate = rate / (val + 1);
+
+	clk_debug("scg_nic_get_rate NIC0 rate %u\n", rate);
+
+	switch (clk) {
+	case SCG_NIC0_CLK:
+		return rate;
+	case SCG_GPU_CLK:
+		mask = SCG_NICCSR_GPUDIV_MASK;
+		shift = SCG_NICCSR_GPUDIV_SHIFT;
+		break;
+	case SCG_NIC1_EXT_CLK:
+	case SCG_NIC1_BUS_CLK:
+	case SCG_NIC1_CLK:
+		mask = SCG_NICCSR_NIC1DIV_MASK;
+		shift = SCG_NICCSR_NIC1DIV_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	val = (reg & mask) >> shift;
+	rate = rate / (val + 1);
+
+	clk_debug("scg_nic_get_rate NIC1 rate %u\n", rate);
+
+	switch (clk) {
+	case SCG_GPU_CLK:
+	case SCG_NIC1_CLK:
+		return rate;
+	case SCG_NIC1_EXT_CLK:
+		mask = SCG_NICCSR_NIC1EXTDIV_MASK;
+		shift = SCG_NICCSR_NIC1EXTDIV_SHIFT;
+		break;
+	case SCG_NIC1_BUS_CLK:
+		mask = SCG_NICCSR_NIC1BUSDIV_MASK;
+		shift = SCG_NICCSR_NIC1BUSDIV_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	val = (reg & mask) >> shift;
+	rate = rate / (val + 1);
+
+	clk_debug("scg_nic_get_rate NIC1 bus rate %u\n", rate);
+	return rate;
+}
+
+
+static enum scg_clk scg_scs_array[4] = {
+	SCG_SOSC_CLK, SCG_SIRC_CLK, SCG_FIRC_CLK, SCG_ROSC_CLK,
+};
+
+static u32 scg_sys_get_rate(enum scg_clk clk)
+{
+	u32 reg, val, rate;
+
+	if (clk != SCG_CORE_CLK && clk != SCG_BUS_CLK)
+		return 0;
+
+	reg = readl(&scg1_regs->csr);
+	val = (reg & SCG_CCR_SCS_MASK) >> SCG_CCR_SCS_SHIFT;
+
+	clk_debug("scg_sys_get_rate reg 0x%x\n", reg);
+
+	switch (val) {
+	case SCG_SCS_SYS_OSC:
+	case SCG_SCS_SLOW_IRC:
+	case SCG_SCS_FAST_IRC:
+	case SCG_SCS_RTC_OSC:
+		rate = scg_src_get_rate(scg_scs_array[val]);
+		break;
+	case 5:
+		rate = scg_apll_get_rate();
+		break;
+	case 6:
+		rate = scg_spll_get_rate();
+		break;
+	default:
+		return 0;
+	}
+
+	clk_debug("scg_sys_get_rate parent rate %u\n", rate);
+
+	val = (reg & SCG_CCR_DIVCORE_MASK) >> SCG_CCR_DIVCORE_SHIFT;
+
+	rate = rate / (val + 1);
+
+	if (clk == SCG_BUS_CLK) {
+		val = (reg & SCG_CCR_DIVBUS_MASK) >> SCG_CCR_DIVBUS_SHIFT;
+		rate = rate / (val + 1);
+	}
+
+	return rate;
+}
+
+u32 decode_pll(enum pll_clocks pll)
+{
+	u32 reg,  pre_div, infreq, mult;
+	u32 num, denom;
+
+	/*
+	 * Alought there are four choices for the bypass src,
+	 * we choose OSC_24M which is the default set in ROM.
+	 */
+	switch (pll) {
+	case PLL_A7_SPLL:
+		reg = readl(&scg1_regs->spllcsr);
+
+		if (!(reg & SCG_SPLL_CSR_SPLLVLD_MASK))
+			return 0;
+
+		reg = readl(&scg1_regs->spllcfg);
+
+		pre_div = (reg & SCG_PLL_CFG_PREDIV_MASK) >>
+			   SCG_PLL_CFG_PREDIV_SHIFT;
+		pre_div += 1;
+
+		mult = (reg & SCG1_SPLL_CFG_MULT_MASK) >>
+			   SCG_PLL_CFG_MULT_SHIFT;
+
+		infreq = (reg & SCG_PLL_CFG_CLKSRC_MASK) >>
+			   SCG_PLL_CFG_CLKSRC_SHIFT;
+		if (!infreq)
+			infreq = scg_src_get_rate(SCG_SOSC_CLK);
+		else
+			infreq = scg_src_get_rate(SCG_FIRC_CLK);
+
+		num = readl(&scg1_regs->spllnum);
+		denom = readl(&scg1_regs->splldenom);
+
+		return (infreq / pre_div) * (mult + num / denom);
+
+	case PLL_A7_APLL:
+		reg = readl(&scg1_regs->apllcsr);
+
+		if (!(reg & SCG_APLL_CSR_APLLVLD_MASK))
+			return 0;
+
+		reg = readl(&scg1_regs->apllcfg);
+
+		pre_div = (reg & SCG_PLL_CFG_PREDIV_MASK) >>
+			   SCG_PLL_CFG_PREDIV_SHIFT;
+		pre_div += 1;
+
+		mult = (reg & SCG_APLL_CFG_MULT_MASK) >>
+			   SCG_PLL_CFG_MULT_SHIFT;
+
+		infreq = (reg & SCG_PLL_CFG_CLKSRC_MASK) >>
+			   SCG_PLL_CFG_CLKSRC_SHIFT;
+		if (!infreq)
+			infreq = scg_src_get_rate(SCG_SOSC_CLK);
+		else
+			infreq = scg_src_get_rate(SCG_FIRC_CLK);
+
+		num = readl(&scg1_regs->apllnum);
+		denom = readl(&scg1_regs->aplldenom);
+
+		return (infreq / pre_div) * (mult + num / denom);
+
+	case PLL_USB:
+		reg = readl(&scg1_regs->upllcsr);
+
+		if (!(reg & SCG_UPLL_CSR_UPLLVLD_MASK))
+			return 0;
+
+		return 480000000u;
+
+	case PLL_MIPI:
+		return 480000000u;
+	default:
+		printf("Unsupported pll clocks %d\n", pll);
+		break;
+	}
+
+	return 0;
+}
+
+u32 scg_clk_get_rate(enum scg_clk clk)
+{
+	switch (clk) {
+	case SCG_SIRC_DIV1_CLK:
+	case SCG_SIRC_DIV2_CLK:
+	case SCG_SIRC_DIV3_CLK:
+		return scg_sircdiv_get_rate(clk);
+
+	case SCG_FIRC_DIV1_CLK:
+	case SCG_FIRC_DIV2_CLK:
+	case SCG_FIRC_DIV3_CLK:
+		return scg_fircdiv_get_rate(clk);
+
+	case SCG_SOSC_DIV1_CLK:
+	case SCG_SOSC_DIV2_CLK:
+	case SCG_SOSC_DIV3_CLK:
+		return scg_soscdiv_get_rate(clk);
+
+	case SCG_CORE_CLK:
+	case SCG_BUS_CLK:
+		return scg_sys_get_rate(clk);
+
+	case SCG_SPLL_PFD0_CLK:
+	case SCG_SPLL_PFD1_CLK:
+	case SCG_SPLL_PFD2_CLK:
+	case SCG_SPLL_PFD3_CLK:
+		return scg_spll_pfd_get_rate(clk);
+
+	case SCG_APLL_PFD0_CLK:
+	case SCG_APLL_PFD1_CLK:
+	case SCG_APLL_PFD2_CLK:
+	case SCG_APLL_PFD3_CLK:
+		return scg_apll_pfd_get_rate(clk);
+
+	case SCG_DDR_CLK:
+		return scg_ddr_get_rate();
+
+	case SCG_NIC0_CLK:
+	case SCG_GPU_CLK:
+	case SCG_NIC1_CLK:
+	case SCG_NIC1_BUS_CLK:
+	case SCG_NIC1_EXT_CLK:
+		return scg_nic_get_rate(clk);
+
+	case USB_PLL_OUT:
+		return decode_pll(PLL_USB);
+
+	case MIPI_PLL_OUT:
+		return decode_pll(PLL_MIPI);
+
+	case SCG_SOSC_CLK:
+	case SCG_FIRC_CLK:
+	case SCG_SIRC_CLK:
+	case SCG_ROSC_CLK:
+		return scg_src_get_rate(clk);
+	default:
+		return 0;
+	}
+}
+
+int scg_enable_pll_pfd(enum scg_clk clk, u32 frac)
+{
+	u32 reg;
+	u32 shift, mask, gate, valid;
+	u32 addr;
+
+	if (frac < 12 || frac > 35)
+		return -EINVAL;
+
+	switch (clk) {
+	case SCG_SPLL_PFD0_CLK:
+	case SCG_APLL_PFD0_CLK:
+		gate = SCG_PLL_PFD0_GATE_MASK;
+		valid = SCG_PLL_PFD0_VALID_MASK;
+		mask = SCG_PLL_PFD0_FRAC_MASK;
+		shift = SCG_PLL_PFD0_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD0_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	case SCG_SPLL_PFD1_CLK:
+	case SCG_APLL_PFD1_CLK:
+		gate = SCG_PLL_PFD1_GATE_MASK;
+		valid = SCG_PLL_PFD1_VALID_MASK;
+		mask = SCG_PLL_PFD1_FRAC_MASK;
+		shift = SCG_PLL_PFD1_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD1_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	case SCG_SPLL_PFD2_CLK:
+	case SCG_APLL_PFD2_CLK:
+		gate = SCG_PLL_PFD2_GATE_MASK;
+		valid = SCG_PLL_PFD2_VALID_MASK;
+		mask = SCG_PLL_PFD2_FRAC_MASK;
+		shift = SCG_PLL_PFD2_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD2_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	case SCG_SPLL_PFD3_CLK:
+	case SCG_APLL_PFD3_CLK:
+		gate = SCG_PLL_PFD3_GATE_MASK;
+		valid = SCG_PLL_PFD3_VALID_MASK;
+		mask = SCG_PLL_PFD3_FRAC_MASK;
+		shift = SCG_PLL_PFD3_FRAC_SHIFT;
+
+		if (clk == SCG_SPLL_PFD3_CLK)
+			addr = (u32)(&scg1_regs->spllpfd);
+		else
+			addr = (u32)(&scg1_regs->apllpfd);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Gate the PFD */
+	reg = readl(addr);
+	reg |= gate;
+	writel(reg, addr);
+
+	/* Write Frac divider */
+	reg &= ~mask;
+	reg |= (frac << shift) & mask;
+	writel(reg, addr);
+
+	/*
+	 * Un-gate the PFD
+	 * (Need un-gate before checking valid, not align with RM)
+	 */
+	reg &= ~gate;
+	writel(reg, addr);
+
+	/* Wait for PFD clock being valid */
+	do {
+		reg = readl(addr);
+	} while (!(reg & valid));
+
+	return 0;
+}
+
+#define SIM_MISC_CTRL0_USB_PLL_EN_MASK (0x1 << 2)
+int scg_enable_usb_pll(bool usb_control)
+{
+	u32 sosc_rate;
+	s32 timeout = 1000000;
+	u32 reg;
+
+	struct usbphy_regs *usbphy =
+		(struct usbphy_regs *)USBPHY_RBASE;
+
+	sosc_rate = scg_src_get_rate(SCG_SOSC_CLK);
+	if (!sosc_rate)
+		return -EPERM;
+
+	reg = readl(SIM0_RBASE + 0x3C);
+	if (usb_control)
+		reg &= ~SIM_MISC_CTRL0_USB_PLL_EN_MASK;
+	else
+		reg |= SIM_MISC_CTRL0_USB_PLL_EN_MASK;
+	writel(reg, SIM0_RBASE + 0x3C);
+
+	if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) {
+		writel(0x1c00000, &usbphy->usb1_pll_480_ctrl_clr);
+
+		switch (sosc_rate) {
+		case 24000000:
+			writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		case 30000000:
+			writel(0x800000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		case 19200000:
+			writel(0x1400000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		default:
+			writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+		}
+
+		/* Enable the regulator first */
+		writel(PLL_USB_REG_ENABLE_MASK,
+		       &usbphy->usb1_pll_480_ctrl_set);
+
+		/* Wait at least 15us */
+		udelay(15);
+
+		/* Enable the power */
+		writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set);
+
+		/* Wait lock */
+		while (timeout--) {
+			if (readl(&usbphy->usb1_pll_480_ctrl) &
+			    PLL_USB_LOCK_MASK)
+				break;
+		}
+
+		if (timeout <= 0) {
+			/* If timeout, we power down the pll */
+			writel(PLL_USB_PWR_MASK,
+			       &usbphy->usb1_pll_480_ctrl_clr);
+			return -ETIME;
+		}
+	}
+
+	/* Clear the bypass */
+	writel(PLL_USB_BYPASS_MASK, &usbphy->usb1_pll_480_ctrl_clr);
+
+	/* Enable the PLL clock out to USB */
+	writel((PLL_USB_EN_USB_CLKS_MASK | PLL_USB_ENABLE_MASK),
+	       &usbphy->usb1_pll_480_ctrl_set);
+
+	if (!usb_control) {
+		while (timeout--) {
+			if (readl(&scg1_regs->upllcsr) &
+			    SCG_UPLL_CSR_UPLLVLD_MASK)
+				break;
+		}
+
+		if (timeout <= 0) {
+			reg = readl(SIM0_RBASE + 0x3C);
+			reg &= ~SIM_MISC_CTRL0_USB_PLL_EN_MASK;
+			writel(reg, SIM0_RBASE + 0x3C);
+			return -ETIME;
+		}
+	}
+
+	return 0;
+}
+
+
+/* A7 domain system clock source is SPLL */
+#define SCG1_RCCR_SCS_NUM	((SCG_SCS_SYS_PLL) << SCG_CCR_SCS_SHIFT)
+
+/* A7 Core clck = SPLL PFD0 / 1 = 500MHz / 1 = 500MHz */
+#define SCG1_RCCR_DIVCORE_NUM	((0x0)  << SCG_CCR_DIVCORE_SHIFT)
+#define SCG1_RCCR_CFG_MASK	(SCG_CCR_SCS_MASK | SCG_CCR_DIVBUS_MASK)
+
+/* A7 Plat clck = A7 Core Clock / 2 = 250MHz / 1 = 250MHz */
+#define SCG1_RCCR_DIVBUS_NUM	((0x1)  << SCG_CCR_DIVBUS_SHIFT)
+#define SCG1_RCCR_CFG_NUM	(SCG1_RCCR_SCS_NUM | SCG1_RCCR_DIVBUS_NUM)
+
+void scg_a7_rccr_init(void)
+{
+	u32 rccr_reg_val = 0;
+
+	rccr_reg_val = readl(&scg1_regs->rccr);
+
+	rccr_reg_val &= (~SCG1_RCCR_CFG_MASK);
+	rccr_reg_val |= (SCG1_RCCR_CFG_NUM);
+
+	writel(rccr_reg_val, &scg1_regs->rccr);
+}
+
+/* POSTDIV2 = 1 */
+#define SCG1_SPLL_CFG_POSTDIV2_NUM	((0x0)  << SCG_PLL_CFG_POSTDIV2_SHIFT)
+/* POSTDIV1 = 1 */
+#define SCG1_SPLL_CFG_POSTDIV1_NUM	((0x0)  << SCG_PLL_CFG_POSTDIV1_SHIFT)
+
+/* MULT = 22 */
+#define SCG1_SPLL_CFG_MULT_NUM		((22)   << SCG_PLL_CFG_MULT_SHIFT)
+
+/* PFD0 output clock selected */
+#define SCG1_SPLL_CFG_PFDSEL_NUM	((0) << SCG_PLL_CFG_PFDSEL_SHIFT)
+/* PREDIV = 1 */
+#define SCG1_SPLL_CFG_PREDIV_NUM	((0x0)  << SCG_PLL_CFG_PREDIV_SHIFT)
+/* SPLL output clocks (including PFD outputs) selected */
+#define SCG1_SPLL_CFG_BYPASS_NUM	((0x0)  << SCG_PLL_CFG_BYPASS_SHIFT)
+/* SPLL PFD output clock selected */
+#define SCG1_SPLL_CFG_PLLSEL_NUM	((0x1)  << SCG_PLL_CFG_PLLSEL_SHIFT)
+/* Clock source is System OSC */
+#define SCG1_SPLL_CFG_CLKSRC_NUM	((0x0)  << SCG_PLL_CFG_CLKSRC_SHIFT)
+#define SCG1_SPLL_CFG_NUM_24M_OSC	(SCG1_SPLL_CFG_POSTDIV2_NUM	| \
+					 SCG1_SPLL_CFG_POSTDIV1_NUM     | \
+					 (22 << SCG_PLL_CFG_MULT_SHIFT) | \
+					 SCG1_SPLL_CFG_PFDSEL_NUM       | \
+					 SCG1_SPLL_CFG_PREDIV_NUM       | \
+					 SCG1_SPLL_CFG_BYPASS_NUM       | \
+					 SCG1_SPLL_CFG_PLLSEL_NUM       | \
+					 SCG1_SPLL_CFG_CLKSRC_NUM)
+/*413Mhz = A7 SPLL(528MHz) * 18/23 */
+#define SCG1_SPLL_PFD0_FRAC_NUM		((23) << SCG_PLL_PFD0_FRAC_SHIFT)
+
+void scg_a7_spll_init(void)
+{
+	u32 val = 0;
+
+	/* Disable A7 System PLL */
+	val = readl(&scg1_regs->spllcsr);
+	val &= ~SCG_SPLL_CSR_SPLLEN_MASK;
+	writel(val, &scg1_regs->spllcsr);
+
+	/*
+	 * Per block guide,
+	 * "When changing PFD values, it is recommneded PFDx clock
+	 * gets gated first by writing a value of 1 to PFDx_CLKGATE register,
+	 * then program the new PFD value, then poll the PFDx_VALID
+	 * flag to set before writing a value of 0 to PFDx_CLKGATE
+	 * to ungate the PFDx clock and allow PFDx clock to run"
+	 */
+
+	/* Gate off A7 SPLL PFD0 ~ PDF4  */
+	val = readl(&scg1_regs->spllpfd);
+	val |= (SCG_PLL_PFD3_GATE_MASK |
+			SCG_PLL_PFD2_GATE_MASK |
+			SCG_PLL_PFD1_GATE_MASK |
+			SCG_PLL_PFD0_GATE_MASK);
+	writel(val, &scg1_regs->spllpfd);
+
+	/* ================ A7 SPLL Configuration Start ============== */
+
+	/* Configure A7 System PLL */
+	writel(SCG1_SPLL_CFG_NUM_24M_OSC, &scg1_regs->spllcfg);
+
+	/* Enable A7 System PLL */
+	val = readl(&scg1_regs->spllcsr);
+	val |= SCG_SPLL_CSR_SPLLEN_MASK;
+	writel(val, &scg1_regs->spllcsr);
+
+	/* Wait for A7 SPLL clock ready */
+	while (!(readl(&scg1_regs->spllcsr) & SCG_SPLL_CSR_SPLLVLD_MASK))
+		;
+
+	/* Configure A7 SPLL PFD0 */
+	val = readl(&scg1_regs->spllpfd);
+	val &= ~SCG_PLL_PFD0_FRAC_MASK;
+	val |= SCG1_SPLL_PFD0_FRAC_NUM;
+	writel(val, &scg1_regs->spllpfd);
+
+	/* Un-gate A7 SPLL PFD0 */
+	val = readl(&scg1_regs->spllpfd);
+	val &= ~SCG_PLL_PFD0_GATE_MASK;
+	writel(val, &scg1_regs->spllpfd);
+
+	/* Wait for A7 SPLL PFD0 clock being valid */
+	while (!(readl(&scg1_regs->spllpfd) & SCG_PLL_PFD0_VALID_MASK))
+		;
+
+	/* ================ A7 SPLL Configuration End ============== */
+}
+
+/* DDR clock source is APLL PFD0 (396MHz) */
+#define SCG1_DDRCCR_DDRCS_NUM		((0x0) << SCG_DDRCCR_DDRCS_SHIFT)
+/* DDR clock = APLL PFD0 / 1 = 396MHz / 1 = 396MHz */
+#define SCG1_DDRCCR_DDRDIV_NUM		((0x1) << SCG_DDRCCR_DDRDIV_SHIFT)
+/* DDR clock = APLL PFD0 / 2 = 396MHz / 2 = 198MHz */
+#define SCG1_DDRCCR_DDRDIV_LF_NUM	((0x2) << SCG_DDRCCR_DDRDIV_SHIFT)
+#define SCG1_DDRCCR_CFG_NUM		(SCG1_DDRCCR_DDRCS_NUM  | \
+					 SCG1_DDRCCR_DDRDIV_NUM)
+#define SCG1_DDRCCR_CFG_LF_NUM		(SCG1_DDRCCR_DDRCS_NUM  | \
+					 SCG1_DDRCCR_DDRDIV_LF_NUM)
+void scg_a7_ddrclk_init(void)
+{
+	writel(SCG1_DDRCCR_CFG_NUM, &scg1_regs->ddrccr);
+}
+
+/* SCG1(A7) APLLCFG configurations */
+/* divide by 1 <<28 */
+#define SCG1_APLL_CFG_POSTDIV2_NUM      ((0x0) << SCG_PLL_CFG_POSTDIV2_SHIFT)
+/* divide by 1 <<24 */
+#define SCG1_APLL_CFG_POSTDIV1_NUM      ((0x0) << SCG_PLL_CFG_POSTDIV1_SHIFT)
+/* MULT is 22  <<16 */
+#define SCG1_APLL_CFG_MULT_NUM          ((22)  << SCG_PLL_CFG_MULT_SHIFT)
+/* PFD0 output clock selected  <<14 */
+#define SCG1_APLL_CFG_PFDSEL_NUM        ((0) << SCG_PLL_CFG_PFDSEL_SHIFT)
+/* PREDIV = 1	<<8 */
+#define SCG1_APLL_CFG_PREDIV_NUM        ((0x0) << SCG_PLL_CFG_PREDIV_SHIFT)
+/* APLL output clocks (including PFD outputs) selected	<<2 */
+#define SCG1_APLL_CFG_BYPASS_NUM        ((0x0) << SCG_PLL_CFG_BYPASS_SHIFT)
+/* APLL PFD output clock selected <<1 */
+#define SCG1_APLL_CFG_PLLSEL_NUM        ((0x0) << SCG_PLL_CFG_PLLSEL_SHIFT)
+/* Clock source is System OSC <<0 */
+#define SCG1_APLL_CFG_CLKSRC_NUM        ((0x0) << SCG_PLL_CFG_CLKSRC_SHIFT)
+
+/*
+ * A7 APLL = 24MHz / 1 * 22 / 1 / 1 = 528MHz,
+ * system PLL is sourced from APLL,
+ * APLL clock source is system OSC (24MHz)
+ */
+#define SCG1_APLL_CFG_NUM_24M_OSC (SCG1_APLL_CFG_POSTDIV2_NUM     |   \
+				   SCG1_APLL_CFG_POSTDIV1_NUM     |   \
+				   (22 << SCG_PLL_CFG_MULT_SHIFT) |   \
+				   SCG1_APLL_CFG_PFDSEL_NUM       |   \
+				   SCG1_APLL_CFG_PREDIV_NUM       |   \
+				   SCG1_APLL_CFG_BYPASS_NUM       |   \
+				   SCG1_APLL_CFG_PLLSEL_NUM       |   \
+				   SCG1_APLL_CFG_CLKSRC_NUM)
+
+/* PFD0 Freq = A7 APLL(528MHz) * 18 / 27 = 352MHz */
+#define SCG1_APLL_PFD0_FRAC_NUM (27)
+
+
+void scg_a7_apll_init(void)
+{
+	u32 val = 0;
+
+	/* Disable A7 Auxiliary PLL */
+	val = readl(&scg1_regs->apllcsr);
+	val &= ~SCG_APLL_CSR_APLLEN_MASK;
+	writel(val, &scg1_regs->apllcsr);
+
+	/* Gate off A7 APLL PFD0 ~ PDF4  */
+	val = readl(&scg1_regs->apllpfd);
+	val |= 0x80808080;
+	writel(val, &scg1_regs->apllpfd);
+
+	/* ================ A7 APLL Configuration Start ============== */
+	/* Configure A7 Auxiliary PLL */
+	writel(SCG1_APLL_CFG_NUM_24M_OSC, &scg1_regs->apllcfg);
+
+	/* Enable A7 Auxiliary PLL */
+	val = readl(&scg1_regs->apllcsr);
+	val |= SCG_APLL_CSR_APLLEN_MASK;
+	writel(val, &scg1_regs->apllcsr);
+
+	/* Wait for A7 APLL clock ready */
+	while (!(readl(&scg1_regs->apllcsr) & SCG_APLL_CSR_APLLVLD_MASK))
+		;
+
+	/* Configure A7 APLL PFD0 */
+	val = readl(&scg1_regs->apllpfd);
+	val &= ~SCG_PLL_PFD0_FRAC_MASK;
+	val |= SCG1_APLL_PFD0_FRAC_NUM;
+	writel(val, &scg1_regs->apllpfd);
+
+	/* Un-gate A7 APLL PFD0 */
+	val = readl(&scg1_regs->apllpfd);
+	val &= ~SCG_PLL_PFD0_GATE_MASK;
+	writel(val, &scg1_regs->apllpfd);
+
+	/* Wait for A7 APLL PFD0 clock being valid */
+	while (!(readl(&scg1_regs->apllpfd) & SCG_PLL_PFD0_VALID_MASK))
+		;
+}
+
+/* SCG1(A7) FIRC DIV configurations */
+/* Disable FIRC DIV3 */
+#define SCG1_FIRCDIV_DIV3_NUM           ((0x0) << SCG_FIRCDIV_DIV3_SHIFT)
+/* FIRC DIV2 = 48MHz / 1 = 48MHz */
+#define SCG1_FIRCDIV_DIV2_NUM           ((0x1) << SCG_FIRCDIV_DIV2_SHIFT)
+/* Disable FIRC DIV1 */
+#define SCG1_FIRCDIV_DIV1_NUM           ((0x0) << SCG_FIRCDIV_DIV1_SHIFT)
+
+void scg_a7_firc_init(void)
+{
+	/* Wait for FIRC clock ready */
+	while (!(readl(&scg1_regs->firccsr) & SCG_FIRC_CSR_FIRCVLD_MASK))
+		;
+
+	/* Configure A7 FIRC DIV1 ~ DIV3 */
+	writel((SCG1_FIRCDIV_DIV3_NUM |
+			SCG1_FIRCDIV_DIV2_NUM |
+			SCG1_FIRCDIV_DIV1_NUM), &scg1_regs->fircdiv);
+}
+
+/* SCG1(A7) NICCCR configurations */
+/* NIC clock source is DDR clock (396/198MHz) */
+#define SCG1_NICCCR_NICCS_NUM		((0x1) << SCG_NICCCR_NICCS_SHIFT)
+
+/* NIC0 clock = DDR Clock / 2 = 396MHz / 2 = 198MHz */
+#define SCG1_NICCCR_NIC0_DIV_NUM	((0x1) << SCG_NICCCR_NIC0_DIV_SHIFT)
+/* NIC0 clock = DDR Clock / 1 = 198MHz / 1 = 198MHz */
+#define SCG1_NICCCR_NIC0_DIV_LF_NUM	((0x0) << SCG_NICCCR_NIC0_DIV_SHIFT)
+/* NIC1 clock = NIC0 Clock / 1 = 198MHz / 2 = 198MHz */
+#define SCG1_NICCCR_NIC1_DIV_NUM	((0x0) << SCG_NICCCR_NIC1_DIV_SHIFT)
+/* NIC1 bus clock = NIC1 Clock / 3 = 198MHz / 3 = 66MHz */
+#define SCG1_NICCCR_NIC1_DIVBUS_NUM	((0x2) << SCG_NICCCR_NIC1_DIVBUS_SHIFT)
+#define SCG1_NICCCR_CFG_NUM		(SCG1_NICCCR_NICCS_NUM      | \
+					 SCG1_NICCCR_NIC0_DIV_NUM   | \
+					 SCG1_NICCCR_NIC1_DIV_NUM   | \
+					 SCG1_NICCCR_NIC1_DIVBUS_NUM)
+
+void scg_a7_nicclk_init(void)
+{
+	writel(SCG1_NICCCR_CFG_NUM, &scg1_regs->nicccr);
+}
+
+/* SCG1(A7) FIRC DIV configurations */
+/* Enable FIRC DIV3 */
+#define SCG1_SOSCDIV_DIV3_NUM		((0x1) << SCG_SOSCDIV_DIV3_SHIFT)
+/* FIRC DIV2 = 48MHz / 1 = 48MHz */
+#define SCG1_SOSCDIV_DIV2_NUM		((0x1) << SCG_SOSCDIV_DIV2_SHIFT)
+/* Enable FIRC DIV1 */
+#define SCG1_SOSCDIV_DIV1_NUM		((0x1) << SCG_SOSCDIV_DIV1_SHIFT)
+
+void scg_a7_soscdiv_init(void)
+{
+	/* Wait for FIRC clock ready */
+	while (!(readl(&scg1_regs->sosccsr) & SCG_SOSC_CSR_SOSCVLD_MASK))
+		;
+
+	/* Configure A7 FIRC DIV1 ~ DIV3 */
+	writel((SCG1_SOSCDIV_DIV3_NUM | SCG1_SOSCDIV_DIV2_NUM |
+	       SCG1_SOSCDIV_DIV1_NUM), &scg1_regs->soscdiv);
+}
+
+void scg_a7_sys_clk_sel(enum scg_sys_src clk)
+{
+	u32 rccr_reg_val = 0;
+
+	clk_debug("%s: system clock selected as %s\n", "[SCG]",
+		  clk == SCG_SCS_SYS_OSC ? "SYS_OSC" :
+		  clk == SCG_SCS_SLOW_IRC  ? "SLOW_IRC" :
+		  clk == SCG_SCS_FAST_IRC  ? "FAST_IRC" :
+		  clk == SCG_SCS_RTC_OSC   ? "RTC_OSC" :
+		  clk == SCG_SCS_AUX_PLL   ? "AUX_PLL" :
+		  clk == SCG_SCS_SYS_PLL   ? "SYS_PLL" :
+		  clk == SCG_SCS_USBPHY_PLL ? "USBPHY_PLL" :
+		  "Invalid source"
+	);
+
+	rccr_reg_val = readl(&scg1_regs->rccr);
+	rccr_reg_val &= ~SCG_CCR_SCS_MASK;
+	rccr_reg_val |= (clk << SCG_CCR_SCS_SHIFT);
+	writel(rccr_reg_val, &scg1_regs->rccr);
+}
+
+void scg_a7_info(void)
+{
+	debug("SCG Version: 0x%x\n", readl(&scg1_regs->verid));
+	debug("SCG Parameter: 0x%x\n", readl(&scg1_regs->param));
+	debug("SCG RCCR Value: 0x%x\n", readl(&scg1_regs->rccr));
+	debug("SCG Clock Status: 0x%x\n", readl(&scg1_regs->csr));
+}