board: ti: am335x-ice: Configure the CDCE913 clock synthesizer
AM335x-ICE boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
diff --git a/arch/arm/dts/am335x-icev2-u-boot.dtsi b/arch/arm/dts/am335x-icev2-u-boot.dtsi
new file mode 100644
index 0000000..cc9569a
--- /dev/null
+++ b/arch/arm/dts/am335x-icev2-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/ {
+ xtal25mhz: xtal25mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&i2c0 {
+ cdce913: cdce913@65 {
+ compatible = "ti,cdce913";
+ reg = <0x65>;
+ clocks = <&xtal25mhz>;
+ #clock-cells = <1>;
+ xtal-load-pf = <0>;
+ };
+};
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 7eaa6cd..499c872 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -791,6 +791,7 @@
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
+ struct udevice *dev;
#if !defined(CONFIG_SPL_BUILD)
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
@@ -871,6 +872,9 @@
env_set("serial#", board_serial);
}
+ /* Just probe the potentially supported cdce913 device */
+ uclass_get_device(UCLASS_CLK, 0, &dev);
+
return 0;
}
#endif
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 2aa9b65..93a28b2 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -77,3 +77,5 @@
CONFIG_RSA=y
CONFIG_LZO=y
# CONFIG_OF_LIBFDT_OVERLAY is not set
+CONFIG_CLK=y
+CONFIG_CLK_CDCE9XX=y