diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index f0ed5c6..217def3 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -22,6 +22,9 @@
 config SOC_K3_J721S2
 	bool "TI's K3 based J721S2 SoC Family Support"
 
+config SOC_K3_J784S4
+	bool "TI's K3 based J784S4 SoC Family Support"
+
 endchoice
 
 if SOC_K3_J721E
@@ -35,7 +38,7 @@
 config SYS_K3_NON_SECURE_MSRAM_SIZE
 	hex
 	default 0x80000 if SOC_K3_AM654
-	default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2
+	default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
 	default 0x1c0000 if SOC_K3_AM642
 	default 0x3c000 if SOC_K3_AM625 || SOC_K3_AM62A7
 	help
@@ -47,7 +50,7 @@
 config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
 	hex
 	default 0x58000 if SOC_K3_AM654
-	default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2
+	default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
 	default 0x180000 if SOC_K3_AM642
 	default 0x38000 if SOC_K3_AM625 || SOC_K3_AM62A7
 	help
@@ -57,15 +60,14 @@
 config SYS_K3_MCU_SCRATCHPAD_BASE
 	hex
 	default 0x40280000 if SOC_K3_AM654
-	default 0x41cff9fc if SOC_K3_J721S2
-	default 0x41cff9fc if SOC_K3_J721E
+	default 0x41cff9fc if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
 	help
 	  Describes the base address of MCU Scratchpad RAM.
 
 config SYS_K3_MCU_SCRATCHPAD_SIZE
 	hex
 	default 0x200 if SOC_K3_AM654
-	default 0x200 if SOC_K3_J721E || SOC_K3_J721S2
+	default 0x200 if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
 	help
 	  Describes the size of MCU Scratchpad RAM.
 
@@ -73,7 +75,7 @@
 	hex
 	default 0x41c7fbfc if SOC_K3_AM654
 	default 0x41cffbfc if SOC_K3_J721E
-	default 0x41cfdbfc if SOC_K3_J721S2
+	default 0x41cfdbfc if SOC_K3_J721S2 || SOC_K3_J784S4
 	default 0x701bebfc if SOC_K3_AM642
 	default 0x43c3f290 if SOC_K3_AM625
 	default 0x43c3f290 if SOC_K3_AM62A7 && CPU_V7R
@@ -130,7 +132,7 @@
 
 config K3_DM_FW
 	bool "Separate DM firmware image"
-	depends on CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
+	depends on CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7 || SOC_K3_J784S4) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
 	default y
 	help
 	  Enabling this will indicate that the system has separate DM
diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
index 4216137..945698e 100644
--- a/arch/arm/mach-k3/Makefile
+++ b/arch/arm/mach-k3/Makefile
@@ -12,6 +12,7 @@
 obj-$(CONFIG_SOC_K3_J721E) += j721e_fdt.o
 obj-$(CONFIG_SOC_K3_J721S2) += j721s2_fdt.o
 obj-$(CONFIG_SOC_K3_AM625) += am625_fdt.o
+obj-$(CONFIG_SOC_K3_J784S4) += j784s4_fdt.o
 endif
 ifeq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_SOC_K3_AM654) += am654_init.o
@@ -20,5 +21,6 @@
 obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
 obj-$(CONFIG_SOC_K3_AM625) += am625_init.o
 obj-$(CONFIG_SOC_K3_AM62A7) += am62a7_init.o
+obj-$(CONFIG_SOC_K3_J784S4) += j784s4_init.o
 endif
 obj-y += common.o security.o
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index a1a9dfb..0cf1e12 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -33,6 +33,10 @@
 #include "am62a_qos.h"
 #endif
 
+#ifdef CONFIG_SOC_K3_J784S4
+#include "j784s4_hardware.h"
+#endif
+
 /* Assuming these addresses and definitions stay common across K3 devices */
 #define CTRLMMR_WKUP_JTAG_ID	(WKUP_CTRL_MMR0_BASE + 0x14)
 #define JTAG_ID_VARIANT_SHIFT	28
diff --git a/arch/arm/mach-k3/include/mach/j784s4_hardware.h b/arch/arm/mach-k3/include/mach/j784s4_hardware.h
new file mode 100644
index 0000000..0ffe238
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/j784s4_hardware.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * K3: J784S4 SoC definitions, structures etc.
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef __ASM_ARCH_J784S4_HARDWARE_H
+#define __ASM_ARCH_J784S4_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define WKUP_CTRL_MMR0_BASE				0x43000000
+#define MCU_CTRL_MMR0_BASE				0x40f00000
+#define CTRL_MMR0_BASE					0x00100000
+
+#define CTRLMMR_MAIN_DEVSTAT				(CTRL_MMR0_BASE + 0x30)
+#define MAIN_DEVSTAT_BOOT_MODE_B_MASK			BIT(0)
+#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT			0
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK			GENMASK(3, 1)
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT		1
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK	BIT(6)
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT		6
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK			BIT(7)
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT		7
+
+#define CTRLMMR_WKUP_DEVSTAT				(WKUP_CTRL_MMR0_BASE + 0x30)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK		GENMASK(5, 3)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT		3
+#define WKUP_DEVSTAT_MCU_ONLY_MASK			BIT(6)
+#define WKUP_DEVSTAT_MCU_ONLY_SHIFT			6
+
+/* ROM HANDOFF Structure location */
+#define ROM_EXTENDED_BOOT_DATA_INFO			0x41cfdb00
+
+/* MCU SCRATCHPAD usage */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START	CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
+
+#if defined(CONFIG_SYS_K3_SPL_ATF) && !defined(__ASSEMBLY__)
+
+#define J784S4_DEV_MCU_RTI0			367
+#define J784S4_DEV_MCU_RTI1			368
+#define J784S4_DEV_MCU_ARMSS0_CPU0		346
+#define J784S4_DEV_MCU_ARMSS0_CPU1		347
+
+static const u32 put_device_ids[] = {
+	J784S4_DEV_MCU_RTI0,
+	J784S4_DEV_MCU_RTI1,
+};
+
+static const u32 put_core_ids[] = {
+	J784S4_DEV_MCU_ARMSS0_CPU1,
+	J784S4_DEV_MCU_ARMSS0_CPU0,     /* Handle CPU0 after CPU1 */
+};
+
+#endif
+
+#endif /* __ASM_ARCH_J784S4_HARDWARE_H */
diff --git a/arch/arm/mach-k3/include/mach/j784s4_spl.h b/arch/arm/mach-k3/include/mach/j784s4_spl.h
new file mode 100644
index 0000000..d481a46
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/j784s4_spl.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef _ASM_ARCH_J784S4_SPL_H_
+#define _ASM_ARCH_J784S4_SPL_H_
+
+/* With BootMode B = 0 */
+#include <linux/bitops.h>
+
+#define BOOT_DEVICE_HYPERFLASH		0x00
+#define BOOT_DEVICE_OSPI		0x01
+#define BOOT_DEVICE_QSPI		0x02
+#define BOOT_DEVICE_SPI			0x03
+#define BOOT_DEVICE_ETHERNET		0x04
+#define BOOT_DEVICE_I2C			0x06
+#define BOOT_DEVICE_UART		0x07
+#define BOOT_DEVICE_NOR			BOOT_DEVICE_HYPERFLASH
+
+/* With BootMode B = 1 */
+#define BOOT_DEVICE_MMC2		0x10
+#define BOOT_DEVICE_MMC1		0x11
+#define BOOT_DEVICE_DFU			0x12
+#define BOOT_DEVICE_UFS			0x13
+#define BOOT_DEVIE_GPMC			0x14
+#define BOOT_DEVICE_PCIE		0x15
+#define BOOT_DEVICE_XSPI		0x16
+#define BOOT_DEVICE_RAM			0x17
+#define BOOT_DEVICE_MMC2_2		0xFF /* Invalid value */
+
+/* Backup boot modes with MCU Only = 0 */
+#define BACKUP_BOOT_DEVICE_RAM		0x0
+#define BACKUP_BOOT_DEVICE_USB		0x1
+#define BACKUP_BOOT_DEVICE_UART		0x3
+#define BACKUP_BOOT_DEVICE_ETHERNET	0x4
+#define BACKUP_BOOT_DEVICE_MMC2		0x5
+#define BACKUP_BOOT_DEVICE_SPI		0x6
+#define BACKUP_BOOT_DEVICE_I2C		0x7
+
+#define BOOT_MODE_B_SHIFT		4
+#define BOOT_MODE_B_MASK		BIT(4)
+
+#define K3_PRIMARY_BOOTMODE		0x0
+#define K3_BACKUP_BOOTMODE		0x1
+
+#endif
diff --git a/arch/arm/mach-k3/include/mach/spl.h b/arch/arm/mach-k3/include/mach/spl.h
index 3ddc7eb..6f01ab5 100644
--- a/arch/arm/mach-k3/include/mach/spl.h
+++ b/arch/arm/mach-k3/include/mach/spl.h
@@ -30,4 +30,8 @@
 #include "am62a_spl.h"
 #endif
 
+#ifdef CONFIG_SOC_K3_J784S4
+#include "j784s4_spl.h"
+#endif
+
 #endif /* _ASM_ARCH_SPL_H_ */
diff --git a/arch/arm/mach-k3/j784s4_fdt.c b/arch/arm/mach-k3/j784s4_fdt.c
new file mode 100644
index 0000000..d05ed8b
--- /dev/null
+++ b/arch/arm/mach-k3/j784s4_fdt.c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * J784S4: SoC specific initialization
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ *	Apurva Nandan <a-nandan@ti.com>
+ */
+
+#include "common_fdt.h"
+#include <fdt_support.h>
+
+int ft_system_setup(void *blob, struct bd_info *bd)
+{
+	return fdt_fixup_msmc_ram_k3(blob);
+}
diff --git a/arch/arm/mach-k3/j784s4_init.c b/arch/arm/mach-k3/j784s4_init.c
new file mode 100644
index 0000000..ae44203
--- /dev/null
+++ b/arch/arm/mach-k3/j784s4_init.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * J784S4: SoC specific initialization
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ *	Hari Nagalla <hnagalla@ti.com>
+ */
+
+#include <init.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/armv7_mpu.h>
+#include <asm/arch/hardware.h>
+#include "sysfw-loader.h"
+#include "common.h"
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/pinctrl.h>
+#include <mmc.h>
+#include <remoteproc.h>
+
+#define J784S4_MAX_DDR_CONTROLLERS	4
+
+struct fwl_data infra_cbass0_fwls[] = {
+	{ "PSC0", 5, 1 },
+	{ "PLL_CTRL0", 6, 1 },
+	{ "PLL_MMR0", 8, 26 },
+	{ "CTRL_MMR0", 9, 16 },
+	{ "GPIO0", 16, 1 },
+}, wkup_cbass0_fwls[] = {
+	{ "WKUP_PSC0", 129, 1 },
+	{ "WKUP_PLL_CTRL0", 130, 1 },
+	{ "WKUP_CTRL_MMR0", 131, 16 },
+	{ "WKUP_GPIO0", 132, 1 },
+	{ "WKUP_I2C0", 144, 1 },
+	{ "WKUP_USART0", 160, 1 },
+}, mcu_cbass0_fwls[] = {
+	{ "MCU_R5FSS0_CORE0", 1024, 4 },
+	{ "MCU_R5FSS0_CORE0_CFG", 1025, 3 },
+	{ "MCU_R5FSS0_CORE1", 1028, 4 },
+	{ "MCU_R5FSS0_CORE1_CFG", 1029, 1 },
+	{ "MCU_FSS0_CFG", 1032, 12 },
+	{ "MCU_FSS0_S1", 1033, 8 },
+	{ "MCU_FSS0_S0", 1036, 8 },
+	{ "MCU_PSROM49152X32", 1048, 1 },
+	{ "MCU_MSRAM128KX64", 1050, 8 },
+	{ "MCU_MSRAM128KX64_CFG", 1051, 1 },
+	{ "MCU_TIMER0", 1056, 1 },
+	{ "MCU_TIMER9", 1065, 1 },
+	{ "MCU_USART0", 1120, 1 },
+	{ "MCU_I2C0", 1152, 1 },
+	{ "MCU_CTRL_MMR0", 1200, 8 },
+	{ "MCU_PLL_MMR0", 1201, 3 },
+	{ "MCU_CPSW0", 1220, 2 },
+}, cbass_rc_cfg0_fwls[] = {
+	{ "EMMCSD4SS0_CFG", 2400, 4 },
+}, cbass_hc2_fwls[] = {
+	{ "PCIE0", 2547, 24 },
+}, cbass_hc_cfg0_fwls[] = {
+	{ "PCIE0_CFG", 2577, 7 },
+	{ "EMMC8SS0_CFG", 2579, 4 },
+	{ "USB3SS0_CORE", 2580, 4 },
+	{ "USB3SS1_CORE", 2581, 1 },
+}, navss_cbass0_fwls[] = {
+	{ "NACSS_VIRT0", 6253, 1 },
+};
+
+static void ctrl_mmr_unlock(void)
+{
+	/* Unlock all WKUP_CTRL_MMR0 module registers */
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 4);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
+
+	/* Unlock all MCU_CTRL_MMR0 module registers */
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 3);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 4);
+
+	/* Unlock all CTRL_MMR0 module registers */
+	mmr_unlock(CTRL_MMR0_BASE, 0);
+	mmr_unlock(CTRL_MMR0_BASE, 1);
+	mmr_unlock(CTRL_MMR0_BASE, 2);
+	mmr_unlock(CTRL_MMR0_BASE, 3);
+	mmr_unlock(CTRL_MMR0_BASE, 5);
+	mmr_unlock(CTRL_MMR0_BASE, 7);
+}
+
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __section(".data");
+static struct rom_extended_boot_data bootdata __section(".data");
+
+static void store_boot_info_from_rom(void)
+{
+	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+	memcpy(&bootdata, (uintptr_t *)ROM_EXTENDED_BOOT_DATA_INFO,
+	       sizeof(struct rom_extended_boot_data));
+}
+
+void k3_spl_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	/*
+	 * Cannot delay this further as there is a chance that
+	 * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
+	 */
+	store_boot_info_from_rom();
+
+	/* Make all control module registers accessible */
+	ctrl_mmr_unlock();
+
+	if (IS_ENABLED(CONFIG_CPU_V7R)) {
+		disable_linefill_optimization();
+		setup_k3_mpu_regions();
+	}
+
+	/* Init DM early */
+	ret = spl_early_init();
+
+	/* Prepare console output */
+	preloader_console_init();
+
+	if (IS_ENABLED(CONFIG_CPU_V7R)) {
+		/*
+		 * Process pinctrl for the serial0 a.k.a. WKUP_UART0 module and continue
+		 * regardless of the result of pinctrl. Do this without probing the
+		 * device, but instead by searching the device that would request the
+		 * given sequence number if probed. The UART will be used by the system
+		 * firmware (TIFS) image for various purposes and TIFS depends on us
+		 * to initialize its pin settings.
+		 */
+		ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, &dev);
+		if (!ret)
+			pinctrl_select_state(dev, "default");
+
+		/*
+		 * Load, start up, and configure system controller firmware. Provide
+		 * the U-Boot console init function to the TIFS post-PM configuration
+		 * callback hook, effectively switching on (or over) the console
+		 * output.
+		 */
+		k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata), NULL, NULL);
+
+		if (IS_ENABLED(CONFIG_SPL_CLK_K3)) {
+			/*
+			 * Force probe of clk_k3 driver here to ensure basic default clock
+			 * configuration is always done for enabling PM services.
+			 */
+			ret = uclass_get_device_by_driver(UCLASS_CLK,
+							  DM_DRIVER_GET(ti_clk),
+							  &dev);
+			if (ret)
+				panic("Failed to initialize clk-k3!\n");
+		}
+
+		remove_fwl_configs(cbass_hc_cfg0_fwls, ARRAY_SIZE(cbass_hc_cfg0_fwls));
+		remove_fwl_configs(cbass_hc2_fwls, ARRAY_SIZE(cbass_hc2_fwls));
+		remove_fwl_configs(cbass_rc_cfg0_fwls, ARRAY_SIZE(cbass_rc_cfg0_fwls));
+		remove_fwl_configs(infra_cbass0_fwls, ARRAY_SIZE(infra_cbass0_fwls));
+		remove_fwl_configs(mcu_cbass0_fwls, ARRAY_SIZE(mcu_cbass0_fwls));
+		remove_fwl_configs(wkup_cbass0_fwls, ARRAY_SIZE(wkup_cbass0_fwls));
+		remove_fwl_configs(navss_cbass0_fwls, ARRAY_SIZE(navss_cbass0_fwls));
+	}
+
+	/* Output System Firmware version info */
+	k3_sysfw_print_ver();
+}
+
+void k3_mem_init(void)
+{
+	struct udevice *dev;
+	int ret, ctrl = 0;
+
+	if (IS_ENABLED(CONFIG_K3_J721E_DDRSS)) {
+		ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+		if (ret)
+			panic("DRAM 0 init failed: %d\n", ret);
+		ctrl++;
+
+		while (ctrl < J784S4_MAX_DDR_CONTROLLERS) {
+			ret = uclass_next_device_err(&dev);
+			if (ret == -ENODEV)
+				break;
+
+			if (ret)
+				panic("DRAM %d init failed: %d\n", ctrl, ret);
+			ctrl++;
+		}
+		printf("Initialized %d DRAM controllers\n", ctrl);
+	}
+
+	spl_enable_cache();
+}
+
+void board_init_f(ulong dummy)
+{
+	k3_spl_init();
+	k3_mem_init();
+}
+
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
+{
+	switch (boot_device) {
+	case BOOT_DEVICE_MMC1:
+		if (IS_ENABLED(CONFIG_SUPPORT_EMMC_BOOT))
+			return MMCSD_MODE_EMMCBOOT;
+		if (IS_ENABLED(CONFIG_SPL_FS_FAT) || IS_ENABLED(CONFIG_SPL_FS_EXT4))
+			return MMCSD_MODE_FS;
+		return MMCSD_MODE_EMMCBOOT;
+	case BOOT_DEVICE_MMC2:
+		return MMCSD_MODE_FS;
+	default:
+		return MMCSD_MODE_RAW;
+	}
+}
+
+static u32 __get_backup_bootmedia(u32 main_devstat)
+{
+	u32 bkup_boot = (main_devstat & MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
+			MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
+
+	switch (bkup_boot) {
+	case BACKUP_BOOT_DEVICE_USB:
+		return BOOT_DEVICE_DFU;
+	case BACKUP_BOOT_DEVICE_UART:
+		return BOOT_DEVICE_UART;
+	case BACKUP_BOOT_DEVICE_ETHERNET:
+		return BOOT_DEVICE_ETHERNET;
+	case BACKUP_BOOT_DEVICE_MMC2:
+	{
+		u32 port = (main_devstat & MAIN_DEVSTAT_BKUP_MMC_PORT_MASK) >>
+			    MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT;
+		if (port == 0x0)
+			return BOOT_DEVICE_MMC1;
+		return BOOT_DEVICE_MMC2;
+	}
+	case BACKUP_BOOT_DEVICE_SPI:
+		return BOOT_DEVICE_SPI;
+	case BACKUP_BOOT_DEVICE_I2C:
+		return BOOT_DEVICE_I2C;
+	}
+
+	return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat)
+{
+	u32 bootmode = (wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+			WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+
+	bootmode |= (main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) <<
+			BOOT_MODE_B_SHIFT;
+
+	if (bootmode == BOOT_DEVICE_OSPI || bootmode ==	BOOT_DEVICE_QSPI ||
+	    bootmode == BOOT_DEVICE_XSPI)
+		bootmode = BOOT_DEVICE_SPI;
+
+	if (bootmode == BOOT_DEVICE_MMC2) {
+		u32 port = (main_devstat &
+			    MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK) >>
+			   MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT;
+		if (port == 0x0)
+			bootmode = BOOT_DEVICE_MMC1;
+	}
+
+	return bootmode;
+}
+
+u32 spl_spi_boot_bus(void)
+{
+	u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
+	u32 main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+	u32 bootmode = ((wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+				WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT) |
+			((main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) << BOOT_MODE_B_SHIFT);
+
+	return (bootmode == BOOT_DEVICE_QSPI) ? 1 : 0;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
+	u32 main_devstat;
+
+	if (wkup_devstat & WKUP_DEVSTAT_MCU_ONLY_MASK) {
+		printf("ERROR: MCU only boot is not yet supported\n");
+		return BOOT_DEVICE_RAM;
+	}
+
+	/* MAIN CTRL MMR can only be read if MCU ONLY is 0 */
+	main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	if (bootindex == K3_PRIMARY_BOOTMODE)
+		return __get_primary_bootmedia(main_devstat, wkup_devstat);
+	else
+		return __get_backup_bootmedia(main_devstat);
+}
diff --git a/arch/arm/mach-k3/r5/Makefile b/arch/arm/mach-k3/r5/Makefile
index b99199d..b666ed3 100644
--- a/arch/arm/mach-k3/r5/Makefile
+++ b/arch/arm/mach-k3/r5/Makefile
@@ -8,6 +8,7 @@
 obj-$(CONFIG_SOC_K3_J721S2) += j721s2/
 obj-$(CONFIG_SOC_K3_AM625) += am62x/
 obj-$(CONFIG_SOC_K3_AM62A7) += am62ax/
+obj-$(CONFIG_SOC_K3_J784S4) += j784s4/
 
 obj-y += lowlevel_init.o
 obj-y += r5_mpu.o