arm: mach-k3: Add basic support for J784S4 SoC definition
Add J784S4 initialization files for initial SPL boot.
config SYS_K3_MCU_SCRATCHPAD_BASE default value is same
for J721E, J721S2, J784S4. So combined them into a single
default.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
[ add firewall configurations and change the R5 MCU scratchpad ]
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index a1a9dfb..0cf1e12 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -33,6 +33,10 @@
#include "am62a_qos.h"
#endif
+#ifdef CONFIG_SOC_K3_J784S4
+#include "j784s4_hardware.h"
+#endif
+
/* Assuming these addresses and definitions stay common across K3 devices */
#define CTRLMMR_WKUP_JTAG_ID (WKUP_CTRL_MMR0_BASE + 0x14)
#define JTAG_ID_VARIANT_SHIFT 28
diff --git a/arch/arm/mach-k3/include/mach/j784s4_hardware.h b/arch/arm/mach-k3/include/mach/j784s4_hardware.h
new file mode 100644
index 0000000..0ffe238
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/j784s4_hardware.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * K3: J784S4 SoC definitions, structures etc.
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef __ASM_ARCH_J784S4_HARDWARE_H
+#define __ASM_ARCH_J784S4_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define WKUP_CTRL_MMR0_BASE 0x43000000
+#define MCU_CTRL_MMR0_BASE 0x40f00000
+#define CTRL_MMR0_BASE 0x00100000
+
+#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
+#define MAIN_DEVSTAT_BOOT_MODE_B_MASK BIT(0)
+#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT 0
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(3, 1)
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT 1
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK BIT(6)
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT 6
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK BIT(7)
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT 7
+
+#define CTRLMMR_WKUP_DEVSTAT (WKUP_CTRL_MMR0_BASE + 0x30)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK GENMASK(5, 3)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3
+#define WKUP_DEVSTAT_MCU_ONLY_MASK BIT(6)
+#define WKUP_DEVSTAT_MCU_ONLY_SHIFT 6
+
+/* ROM HANDOFF Structure location */
+#define ROM_EXTENDED_BOOT_DATA_INFO 0x41cfdb00
+
+/* MCU SCRATCHPAD usage */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
+
+#if defined(CONFIG_SYS_K3_SPL_ATF) && !defined(__ASSEMBLY__)
+
+#define J784S4_DEV_MCU_RTI0 367
+#define J784S4_DEV_MCU_RTI1 368
+#define J784S4_DEV_MCU_ARMSS0_CPU0 346
+#define J784S4_DEV_MCU_ARMSS0_CPU1 347
+
+static const u32 put_device_ids[] = {
+ J784S4_DEV_MCU_RTI0,
+ J784S4_DEV_MCU_RTI1,
+};
+
+static const u32 put_core_ids[] = {
+ J784S4_DEV_MCU_ARMSS0_CPU1,
+ J784S4_DEV_MCU_ARMSS0_CPU0, /* Handle CPU0 after CPU1 */
+};
+
+#endif
+
+#endif /* __ASM_ARCH_J784S4_HARDWARE_H */
diff --git a/arch/arm/mach-k3/include/mach/j784s4_spl.h b/arch/arm/mach-k3/include/mach/j784s4_spl.h
new file mode 100644
index 0000000..d481a46
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/j784s4_spl.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef _ASM_ARCH_J784S4_SPL_H_
+#define _ASM_ARCH_J784S4_SPL_H_
+
+/* With BootMode B = 0 */
+#include <linux/bitops.h>
+
+#define BOOT_DEVICE_HYPERFLASH 0x00
+#define BOOT_DEVICE_OSPI 0x01
+#define BOOT_DEVICE_QSPI 0x02
+#define BOOT_DEVICE_SPI 0x03
+#define BOOT_DEVICE_ETHERNET 0x04
+#define BOOT_DEVICE_I2C 0x06
+#define BOOT_DEVICE_UART 0x07
+#define BOOT_DEVICE_NOR BOOT_DEVICE_HYPERFLASH
+
+/* With BootMode B = 1 */
+#define BOOT_DEVICE_MMC2 0x10
+#define BOOT_DEVICE_MMC1 0x11
+#define BOOT_DEVICE_DFU 0x12
+#define BOOT_DEVICE_UFS 0x13
+#define BOOT_DEVIE_GPMC 0x14
+#define BOOT_DEVICE_PCIE 0x15
+#define BOOT_DEVICE_XSPI 0x16
+#define BOOT_DEVICE_RAM 0x17
+#define BOOT_DEVICE_MMC2_2 0xFF /* Invalid value */
+
+/* Backup boot modes with MCU Only = 0 */
+#define BACKUP_BOOT_DEVICE_RAM 0x0
+#define BACKUP_BOOT_DEVICE_USB 0x1
+#define BACKUP_BOOT_DEVICE_UART 0x3
+#define BACKUP_BOOT_DEVICE_ETHERNET 0x4
+#define BACKUP_BOOT_DEVICE_MMC2 0x5
+#define BACKUP_BOOT_DEVICE_SPI 0x6
+#define BACKUP_BOOT_DEVICE_I2C 0x7
+
+#define BOOT_MODE_B_SHIFT 4
+#define BOOT_MODE_B_MASK BIT(4)
+
+#define K3_PRIMARY_BOOTMODE 0x0
+#define K3_BACKUP_BOOTMODE 0x1
+
+#endif
diff --git a/arch/arm/mach-k3/include/mach/spl.h b/arch/arm/mach-k3/include/mach/spl.h
index 3ddc7eb..6f01ab5 100644
--- a/arch/arm/mach-k3/include/mach/spl.h
+++ b/arch/arm/mach-k3/include/mach/spl.h
@@ -30,4 +30,8 @@
#include "am62a_spl.h"
#endif
+#ifdef CONFIG_SOC_K3_J784S4
+#include "j784s4_spl.h"
+#endif
+
#endif /* _ASM_ARCH_SPL_H_ */