arm: mvebu: Add RD-AC5X board
The RD-AC5X-32G16HVG6HLG-A0 development board main components and
features include:
* Main 12V/54V power supply
* 270 Gbps throughput packet processor on the main board
* DDR4:
* SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs)
* SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs)
* PCB co-layout with 4GB device to support 8GB (Dual CS) requirement
* 16GB eMMC (Samsung KLMAG1JETD-B041006)
* 16MB SPI NOR(GD25Q127C)
* 32 x 1000 Base-T interfaces
* 16 x 2500 Base-T interfaces
* SR1: 88E2540*4
* SR2: 88E2580*1+88E2540*2
* Six (6) x 25G Base-R SFP28 interfaces
* One (1) x RJ-45 console connector, interfacing to the on board UART
* One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0)
* One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1)
* One (1) x RJ-45 1G Base-T Management port, interfacing to the host
port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy
* One (1) x Oculink port, interfacing to the PCIe port for external CPU
connection
* POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~
Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881
solution)
* POE total power budget 780W
* LED interfaces per network port/POE
* LED interfaces (common) showing system status
* PTP TC mode Supported (Reserved M.2 connector to support BC mode)
Signed-off-by: Chris Packham <judge.packham@gmail.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7918387..b52077c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -278,7 +278,8 @@
cn9132-db-A.dtb \
cn9132-db-B.dtb \
cn9130-crb-A.dtb \
- cn9130-crb-B.dtb
+ cn9130-crb-B.dtb \
+ ac5-98dx35xx-rd.dtb
endif
dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
diff --git a/arch/arm/dts/ac5-98dx35xx-rd.dts b/arch/arm/dts/ac5-98dx35xx-rd.dts
new file mode 100644
index 0000000..d9f217c
--- /dev/null
+++ b/arch/arm/dts/ac5-98dx35xx-rd.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For RD-AC5X.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+/*
+ * Device Tree file for Marvell Alleycat 5X development board
+ * This board file supports the B configuration of the board
+ */
+
+/dts-v1/;
+
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+ model = "Marvell RD-AC5X Board";
+ compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
+
+ aliases {
+ serial0 = &uart0;
+ spiflash0 = &spiflash0;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ spi0 = &spi0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ pinctrl0 = &pinctrl0;
+ sar-reg0 = "/config-space/sar-reg";
+ };
+
+ usb1phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+};
+
+/* USB0 is a host USB */
+&usb0 {
+ status = "okay";
+};
+
+/* USB1 is a peripheral USB */
+&usb1 {
+ status = "okay";
+ phys = <&usb1phy>;
+ phy-names = "usb-phy";
+ dr_mode = "peripheral";
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+ spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&pinctrl0 {
+ /*
+ * MPP Bus: MPP# mode#
+ * eMMC [0-11] 0x1
+ * SPI[0] [12-17] 0x1
+ * TSEN_INT [18] 0x1
+ * DEV_INIT [19] 0x1
+ * SPI[1] [20-23] 0x3
+ * UART[1] [24-25] 0x3
+ * I2C[0] [26-27] 0x1
+ * XSMI[0] [28-29] 0x1 // SCH use SMI[0], reversed due to CPSS problem
+ * SMI[1] [30-31] 0x2 // SCH use XSMI[1], reversed due to CPSS problem
+ * UART[0] [32-33] 0x1
+ * OOB_SMI [34-35] 0x1
+ * PTP_CLK0_OUT [36] 0x1
+ * PTP_PULSE_OUT [37] 0x1
+ * RCVR_CLK_OUT [38] 0x1
+ * GPIO(in/out) [39] 0x0
+ * GPIO(in/out) [40] 0x0
+ * PTP_REF_CLK [41] 0x1
+ * PTP_CLK0 [42] 0x1
+ * LED0_CLK [43] 0x1
+ * LED0_STB [44] 0x1
+ * LED0_DATA [45] 0x1
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 1 1 1 1 1 1 1 1 1 1
+ 1 1 1 1 1 1 1 1 1 1
+ 3 3 3 3 3 3 1 1 1 1
+ 2 2 1 1 1 1 1 1 1 0
+ 0 1 1 1 1 1 >;
+};