| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include <dt-bindings/pinctrl/k3.h> |
| #include <dt-bindings/net/ti-dp83867.h> |
| #include "k3-am65x-binman.dtsi" |
| |
| / { |
| chosen { |
| stdout-path = "serial2:115200n8"; |
| }; |
| |
| aliases { |
| serial2 = &main_uart0; |
| ethernet0 = &cpsw_port1; |
| usb0 = &usb0; |
| usb1 = &usb1; |
| spi0 = &ospi0; |
| spi1 = &ospi1; |
| }; |
| }; |
| |
| &cbass_main{ |
| bootph-pre-ram; |
| main_navss: bus@30800000 { |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &cbass_mcu { |
| bootph-pre-ram; |
| |
| mcu_navss: bus@28380000 { |
| bootph-pre-ram; |
| |
| ringacc@2b800000 { |
| reg = <0x0 0x2b800000 0x0 0x400000>, |
| <0x0 0x2b000000 0x0 0x400000>, |
| <0x0 0x28590000 0x0 0x100>, |
| <0x0 0x2a500000 0x0 0x40000>, |
| <0x0 0x28440000 0x0 0x40000>; |
| reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; |
| bootph-pre-ram; |
| ti,dma-ring-reset-quirk; |
| }; |
| |
| dma-controller@285c0000 { |
| reg = <0x0 0x285c0000 0x0 0x100>, |
| <0x0 0x284c0000 0x0 0x4000>, |
| <0x0 0x2a800000 0x0 0x40000>, |
| <0x0 0x284a0000 0x0 0x4000>, |
| <0x0 0x2aa00000 0x0 0x40000>, |
| <0x0 0x28400000 0x0 0x2000>; |
| reg-names = "gcfg", "rchan", "rchanrt", "tchan", |
| "tchanrt", "rflow"; |
| bootph-pre-ram; |
| }; |
| }; |
| }; |
| |
| &cbass_wakeup { |
| bootph-pre-ram; |
| |
| chipid@43000014 { |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &secure_proxy_main { |
| bootph-pre-ram; |
| }; |
| |
| &dmsc { |
| bootph-pre-ram; |
| k3_sysreset: sysreset-controller { |
| compatible = "ti,sci-sysreset"; |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &k3_pds { |
| bootph-pre-ram; |
| }; |
| |
| &k3_clks { |
| bootph-pre-ram; |
| }; |
| |
| &k3_reset { |
| bootph-pre-ram; |
| }; |
| |
| &wkup_pmx0 { |
| bootph-pre-ram; |
| |
| wkup_i2c0_pins_default { |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &main_pmx0 { |
| bootph-pre-ram; |
| usb0_pins_default: usb0_pins_default { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ |
| >; |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &main_uart0_pins_default { |
| bootph-pre-ram; |
| }; |
| |
| &main_pmx1 { |
| bootph-pre-ram; |
| }; |
| |
| &wkup_pmx0 { |
| mcu-fss0-ospi0-pins-default { |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &main_uart0 { |
| bootph-pre-ram; |
| }; |
| |
| &main_mmc0_pins_default { |
| bootph-pre-ram; |
| }; |
| |
| &main_mmc1_pins_default { |
| bootph-pre-ram; |
| }; |
| |
| &sdhci0 { |
| bootph-pre-ram; |
| }; |
| |
| &sdhci1 { |
| bootph-pre-ram; |
| }; |
| |
| &davinci_mdio { |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| /* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */ |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| }; |
| }; |
| |
| &mcu_cpsw { |
| reg = <0x0 0x46000000 0x0 0x200000>, |
| <0x0 0x40f00200 0x0 0x2>; |
| reg-names = "cpsw_nuss", "mac_efuse"; |
| /delete-property/ ranges; |
| |
| cpsw-phy-sel@40f04040 { |
| compatible = "ti,am654-cpsw-phy-sel"; |
| reg= <0x0 0x40f04040 0x0 0x4>; |
| reg-names = "gmii-sel"; |
| }; |
| }; |
| |
| &wkup_i2c0 { |
| bootph-pre-ram; |
| }; |
| |
| &usb1 { |
| dr_mode = "peripheral"; |
| }; |
| |
| &fss { |
| bootph-pre-ram; |
| }; |
| |
| &ospi0 { |
| bootph-pre-ram; |
| |
| flash@0{ |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &dwc3_0 { |
| status = "okay"; |
| bootph-pre-ram; |
| }; |
| |
| &usb0_phy { |
| status = "okay"; |
| bootph-pre-ram; |
| }; |
| |
| &usb0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb0_pins_default>; |
| dr_mode = "peripheral"; |
| bootph-pre-ram; |
| }; |
| |
| &scm_conf { |
| bootph-pre-ram; |
| }; |