arm: mvebu: Add support for programming LD0 and LD1 eFuse
This patch implements LD eFuse programming support. Armada 385 contains two
LD eFuse lines, each is 256 bit long with one additional lock bit. LD 0
line is mapped to U-Boot fuse bank 64 and LD 1 line to fuse bank 65. U-Boot
32-bit fuse words 0-8 are mapped to LD eFuse line bits 0-255. U-Boot fuse
word 9 is mapped to LD eFuse line lock bit.
So to program LD 1 General Purpose Data line, use U-Boot fuse command:
=> fuse prog -y 65 0 0x76543210
=> fuse prog -y 65 1 0xfedcba98
=> fuse prog -y 65 2 0x76543210
=> fuse prog -y 65 3 0xfedcba98
=> fuse prog -y 65 4 0x76543210
=> fuse prog -y 65 5 0xfedcba98
=> fuse prog -y 65 6 0x76543210
=> fuse prog -y 65 7 0xfedcba98
=> fuse prog -y 65 8 0x1
Signed-off-by: Pali Rohár <pali@kernel.org>
diff --git a/arch/arm/mach-mvebu/include/mach/efuse.h b/arch/arm/mach-mvebu/include/mach/efuse.h
index 122e735..b125c30 100644
--- a/arch/arm/mach-mvebu/include/mach/efuse.h
+++ b/arch/arm/mach-mvebu/include/mach/efuse.h
@@ -70,4 +70,8 @@
int mvebu_lock_efuse(int nr);
+void mvebu_read_ld_efuse(int ld1, u32 *line);
+
+int mvebu_prog_ld_efuse(int ld1, u32 word, u32 val);
+
#endif