diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
new file mode 100644
index 0000000..da1a501
--- /dev/null
+++ b/board/esd/pci405/cmd_pci405.c
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2002
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <405gp_pci.h>
+#include <cmd_bsp.h>
+
+#include "pci405.h"
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
+
+#if 0 /* test-only */
+#include "../common/fpga.c"
+void error_print(void)
+{
+	int i;
+	volatile unsigned char *ptr;
+	volatile unsigned long *ptr2;
+	
+	printf("\n 2nd SJA1000:\n");
+	ptr = 0xf0000100;
+	for (i=0; i<0x20; i++) {
+		printf("%02x ", *ptr++);
+	}
+
+	ptr2 = 0xf0400008;
+	printf("\nTimestamp = %x\n", *ptr2);
+	udelay(1000);
+	printf("Timestamp = %x\n", *ptr2);
+	udelay(1000);
+	printf("Timestamp = %x\n", *ptr2);
+
+#if 0 /* test-only */
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	printf("Resetting FPGA...\n");
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+	do_loadpci(NULL, 0,0, NULL);
+#endif
+}
+
+void read_loop(void)
+{
+	int i;
+	volatile unsigned char *ptr;
+	volatile unsigned char val;
+	volatile unsigned long *ptr2;
+
+	printf("\nread loop on 1st sja1000...");
+	while (1) {
+		ptr = 0xf0000000;
+/*		printf("\n1st SJA1000:\n");*/
+		for (i=0; i<0x20; i++) {
+			i = i;
+			val = *ptr++;
+/*			printf("%02x ", val);*/
+		}
+
+		/* Abort if ctrl-c was pressed */
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return 0;
+		}
+	}
+}
+#endif
+/*
+ * Command loadpci: wait for signal from host and boot image.
+ */
+int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned int *ptr = 0;
+	int count = 0;
+	int count2 = 0;
+	int status;
+	int i;
+	char addr[16];
+	char str[] = "\\|/-";
+	char *local_args[2];
+
+#if 0 /* test-only */
+	puts("\nStarting sja1000 test...");
+	{
+		int count;
+		volatile unsigned char *ptr;
+		volatile unsigned char val;
+		volatile unsigned char val2;
+
+#if 1 /* write test */
+		ptr = 0xf0000014;
+		for (i=1; i<11; i++)
+			*ptr++ = i;
+#endif
+		
+		count = 0;
+		while (1) {
+			count++;
+#if 0 /* write test */
+			ptr = 0xf0000014;
+			for (i=1; i<11; i++)
+				*ptr++ = i;
+#endif
+#if 1 /* read test */
+			ptr = 0xf0000014;
+			for (i=1; i<11; i++) {
+				val = *ptr++;
+#if 1
+				if (val != i) {
+					ptr = 0xf0000100;
+					val = *ptr; /* trigger las */
+
+					ptr = 0xf0000014;
+					val2 = *ptr;
+
+					printf("\nERROR: count=%d: soll=%x ist=%x -> staring read loop on 1st sja1000...\n",	count, i, val);
+
+					printf("soll=%x ist=%x -> staring read loop on 1st sja1000...\n", 1, val2);
+
+					return 0; /* test-only */
+					udelay(1000);
+					error_print();
+					read_loop();
+					return 0;
+				}
+#endif
+			}
+#endif
+
+			/* Abort if ctrl-c was pressed */
+			if (ctrlc()) {
+				puts("\nAbort\n");
+				return 0;
+			}
+
+			if (!(count % 100000)) {
+				printf(".");
+			}
+		}
+	}
+#endif
+	/*
+	 * Mark sync address
+	 */
+	ptr = 0;
+	*ptr = 0xffffffff;
+	puts("\nWaiting for image from pci host -");
+
+	/*
+	 * Wait for host to write the start address
+	 */
+	while (*ptr == 0xffffffff) {
+		count++;
+		if (!(count % 100)) {
+			count2++;
+			putc(0x08); /* backspace */
+			putc(str[count2 % 4]);
+		}
+
+		/* Abort if ctrl-c was pressed */
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return 0;
+		}
+
+		udelay(1000);
+	}
+
+	if (*ptr == PCI_RECONFIG_MAGIC) {
+		/*
+		 * Save own pci configuration in PRAM
+		 */
+		memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN);
+		ptr = (unsigned int *)PCI_REGS_ADDR + 1;
+		for (i=0; i<0x40; i+=4) {
+			pci_read_config_dword(PCIDEVID_405GP, i, ptr++);
+		}
+		ptr = (unsigned int *)PCI_REGS_ADDR;
+		*ptr = crc32(0, (char *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4);
+
+		printf("\nStoring PCI Configuration Regs...\n");
+	} else {
+		sprintf(addr, "%08x", *ptr);
+		
+		/*
+		 * Boot image
+		 */
+		printf("\nBooting image at addr 0x%s ...\n", addr);
+		setenv("loadaddr", addr);
+		
+		local_args[0] = argv[0];
+		local_args[1] = NULL;
+		status = do_bootm (cmdtp, 0, 1, local_args);
+	}
+
+	return 0;
+}
+
+#endif