diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp
index 22ae186..273e8e8 100644
--- a/arch/Kconfig.nxp
+++ b/arch/Kconfig.nxp
@@ -1,7 +1,13 @@
-config CHAIN_OF_TRUST
+config NXP_ESBC
+	bool "NXP ESBC (secure boot) functionality"
+	help
+	  Enable Freescale Secure Boot feature. Normally selected by defconfig.
+	  If unsure, do not change.
+
+menu "Chain of trust / secure boot options"
 	depends on !FIT_SIGNATURE && NXP_ESBC
-	imply CMD_BLOB
-	imply CMD_HASH if ARM
+
+config CHAIN_OF_TRUST
 	select FSL_CAAM
 	select ARCH_MISC_INIT
 	select FSL_SEC_MON
@@ -12,12 +18,12 @@
 	select ENV_IS_NOWHERE
 	select CMD_EXT4 if ARM
 	select CMD_EXT4_WRITE if ARM
-	bool
-	default y
+	imply CMD_BLOB
+	imply CMD_HASH if ARM
+	def_bool y
 
 config CMD_ESBC_VALIDATE
 	bool "Enable the 'esbc_validate' and 'esbc_halt' commands"
-	depends on CHAIN_OF_TRUST
 	default y
 	help
 	  This option enables two commands used for secure booting:
@@ -36,15 +42,14 @@
 
 config SYS_FSL_SFP_BE
 	def_bool y
-	depends on CHAIN_OF_TRUST && (PPC || FSL_LSCH2 || ARCH_LS1021A)
+	depends on PPC || FSL_LSCH2 || ARCH_LS1021A
 
 config SYS_FSL_SFP_LE
 	def_bool y
-	depends on CHAIN_OF_TRUST && !SYS_FSL_SFP_BE
+	depends on !SYS_FSL_SFP_BE
 
 choice
 	prompt "SFP IP revision"
-	depends on CHAIN_OF_TRUST
 	default SYS_FSL_SFP_VER_3_0 if PPC
 	default SYS_FSL_SFP_VER_3_4
 
@@ -61,11 +66,14 @@
 
 config SYS_FSL_SRK_LE
 	def_bool y
-	depends on CHAIN_OF_TRUST && ARM
+	depends on ARM
 
 config KEY_REVOCATION
 	def_bool y
-	depends on CHAIN_OF_TRUST
+
+endmenu
+
+comment "Other functionality shared between NXP SoCs"
 
 config DEEP_SLEEP
 	bool "Enable SoC deep sleep feature"
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index c496e64..a901360 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -41,12 +41,6 @@
 	  cores, count the reserved ports. This will allocate enough memory
 	  in spin table to properly handle all cores.
 
-config NXP_ESBC
-	bool	"NXP_ESBC"
-	help
-		Enable Freescale Secure Boot feature. Normally selected
-		by defconfig. If unsure, do not change.
-
 config SYS_CCI400_OFFSET
 	hex "Offset for CCI400 base"
 	depends on SYS_FSL_HAS_CCI400
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 7f08733..602b624 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -26,7 +26,7 @@
 config ARCH_LS1028A
 	bool
 	select ARMV8_SET_SMPEN
-	select ESBC_HDR_LS
+	select ESBC_HDR_LS if CHAIN_OF_TRUST
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
 	select GICV3
@@ -139,7 +139,7 @@
 	bool
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873 if !TFABOOT
-	select ESBC_HDR_LS
+	select ESBC_HDR_LS if CHAIN_OF_TRUST
 	select FSL_IFC
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
@@ -189,7 +189,7 @@
 	select ARM_ERRATA_828024
 	select ARM_ERRATA_829520
 	select ARM_ERRATA_833471
-	select ESBC_HDR_LS
+	select ESBC_HDR_LS if CHAIN_OF_TRUST
 	select FSL_IFC
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
@@ -242,7 +242,7 @@
 config ARCH_LX2162A
 	bool
 	select ARMV8_SET_SMPEN
-	select ESBC_HDR_LS
+	select ESBC_HDR_LS if CHAIN_OF_TRUST
 	select FSL_DDR_BIST
 	select FSL_DDR_INTERACTIVE
 	select FSL_LAYERSCAPE
@@ -281,7 +281,7 @@
 config ARCH_LX2160A
 	bool
 	select ARMV8_SET_SMPEN
-	select ESBC_HDR_LS
+	select ESBC_HDR_LS if CHAIN_OF_TRUST
 	select FSL_DDR_BIST
 	select FSL_DDR_INTERACTIVE
 	select FSL_LAYERSCAPE
@@ -461,11 +461,6 @@
 	 Enable the EMC2305 fan controller for configuration of fan
 	 speed.
 
-config NXP_ESBC
-	bool "NXP_ESBC"
-	help
-		Enable Freescale Secure Boot feature
-
 config QSPI_AHB_INIT
 	bool "Init the QSPI AHB bus"
 	help
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 0ef5e73..e7003d3 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -827,12 +827,6 @@
 config HETROGENOUS_CLUSTERS
 	bool
 
-config NXP_ESBC
-	bool	"NXP_ESBC"
-	help
-		Enable Freescale Secure Boot feature. Normally selected
-		by defconfig. If unsure, do not change.
-
 config MAX_CPUS
 	int "Maximum number of CPUs permitted for MPC85xx"
 	default 12 if ARCH_T4240
diff --git a/board/congatec/common/Kconfig b/board/congatec/common/Kconfig
index d4a238d..a1f2139 100644
--- a/board/congatec/common/Kconfig
+++ b/board/congatec/common/Kconfig
@@ -1,44 +1,3 @@
-if !ARCH_IMX8M && !ARCH_IMX8
-
-config CHAIN_OF_TRUST
-	depends on !FIT_SIGNATURE && SECURE_BOOT
-	imply CMD_BLOB
-	imply CMD_HASH if ARM
-	select FSL_CAAM
-	select SPL_BOARD_INIT if (ARM && SPL)
-	select SHA_HW_ACCEL
-	select SHA_PROG_HW_ACCEL
-	select ENV_IS_NOWHERE
-	select CMD_EXT4 if ARM
-	select CMD_EXT4_WRITE if ARM
-	bool
-	default y
-
-config CMD_ESBC_VALIDATE
-	bool "Enable the 'esbc_validate' and 'esbc_halt' commands"
-	default y if CHAIN_OF_TRUST
-	help
-	  This option enables two commands used for secure booting:
-
-	    esbc_validate - validate signature using RSA verification
-	    esbc_halt - put the core in spin loop (Secure Boot Only)
-
-endif
-
-config VOL_MONITOR_LTC3882_READ
-	depends on VID
-	bool "Enable the LTC3882 voltage monitor read"
-	help
-	 This option enables LTC3882 voltage monitor read
-	 functionality. It is used by common VID driver.
-
-config VOL_MONITOR_LTC3882_SET
-	depends on VID
-	bool "Enable the LTC3882 voltage monitor set"
-	help
-	 This option enables LTC3882 voltage monitor set
-	 functionality. It is used by common VID driver.
-
 config USB_TCPC
 	bool "USB Typec port controller simple driver"
 	help