dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()
In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c
index e103861..2fba383 100644
--- a/board/st/common/cmd_stboard.c
+++ b/board/st/common/cmd_stboard.c
@@ -85,7 +85,7 @@
return CMD_RET_USAGE;
ret = uclass_get_device_by_driver(UCLASS_MISC,
- DM_GET_DRIVER(stm32mp_bsec),
+ DM_DRIVER_GET(stm32mp_bsec),
&dev);
ret = misc_read(dev, STM32_BSEC_OTP(BSEC_OTP_BOARD),
diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c
index aab7d74..9c3d115 100644
--- a/board/st/common/stm32mp_dfu.c
+++ b/board/st/common/stm32mp_dfu.c
@@ -163,7 +163,7 @@
int ret;
ret = uclass_get_device_by_driver(UCLASS_MISC,
- DM_GET_DRIVER(stm32mp_bsec),
+ DM_DRIVER_GET(stm32mp_bsec),
&dev);
if (ret)
return ret;
@@ -184,7 +184,7 @@
struct udevice *dev;
ret = uclass_get_device_by_driver(UCLASS_MISC,
- DM_GET_DRIVER(stpmic1_nvm),
+ DM_DRIVER_GET(stpmic1_nvm),
&dev);
if (ret)
return ret;
diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c
index 3aa379e..a313b81 100644
--- a/board/st/common/stpmic1.c
+++ b/board/st/common/stpmic1.c
@@ -20,7 +20,7 @@
u32 buck2;
ret = uclass_get_device_by_driver(UCLASS_PMIC,
- DM_GET_DRIVER(pmic_stpmic1), &dev);
+ DM_DRIVER_GET(pmic_stpmic1), &dev);
if (ret)
/* No PMIC on board */
return 0;
@@ -187,7 +187,7 @@
struct udevice *dev;
if (uclass_get_device_by_driver(UCLASS_PMIC,
- DM_GET_DRIVER(pmic_stpmic1), &dev))
+ DM_DRIVER_GET(pmic_stpmic1), &dev))
return;
/* update VDDCORE = BUCK1 */
diff --git a/board/st/common/stusb160x.c b/board/st/common/stusb160x.c
index f1197f9..e0a2b76 100644
--- a/board/st/common/stusb160x.c
+++ b/board/st/common/stusb160x.c
@@ -22,7 +22,7 @@
int ret;
ret = uclass_get_device_by_driver(UCLASS_I2C_GENERIC,
- DM_GET_DRIVER(stusb160x),
+ DM_DRIVER_GET(stusb160x),
&dev);
if (ret < 0)
return ret;
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 8a3ce0a..08393b2 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -116,7 +116,7 @@
/* display the STMicroelectronics board identification */
if (CONFIG_IS_ENABLED(CMD_STBOARD)) {
ret = uclass_get_device_by_driver(UCLASS_MISC,
- DM_GET_DRIVER(stm32mp_bsec),
+ DM_DRIVER_GET(stm32mp_bsec),
&dev);
if (!ret)
ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_BOARD),
@@ -196,7 +196,7 @@
return ret;
ret = uclass_get_device_by_driver(UCLASS_USB_GADGET_GENERIC,
- DM_GET_DRIVER(dwc2_udc_otg),
+ DM_DRIVER_GET(dwc2_udc_otg),
&dwc2_udc_otg);
if (!ret)
debug("dwc2_udc_otg init failed\n");
@@ -464,11 +464,11 @@
* but this value need to be consistent with board design
*/
ret = uclass_get_device_by_driver(UCLASS_PMIC,
- DM_GET_DRIVER(stm32mp_pwr_pmic),
+ DM_DRIVER_GET(stm32mp_pwr_pmic),
&pwr_dev);
if (!ret && IS_ENABLED(CONFIG_DM_REGULATOR)) {
ret = uclass_get_device_by_driver(UCLASS_MISC,
- DM_GET_DRIVER(stm32mp_bsec),
+ DM_DRIVER_GET(stm32mp_bsec),
&dev);
if (ret) {
pr_err("Can't find stm32mp_bsec driver\n");
@@ -618,7 +618,7 @@
struct udevice *dev;
/* configure IRQ line on EV1 for touchscreen before LCD reset */
- uclass_get_device_by_driver(UCLASS_NOP, DM_GET_DRIVER(goodix), &dev);
+ uclass_get_device_by_driver(UCLASS_NOP, DM_DRIVER_GET(goodix), &dev);
}
/* board dependent setup after realloc */
@@ -680,7 +680,7 @@
}
}
ret = uclass_get_device_by_driver(UCLASS_MISC,
- DM_GET_DRIVER(stm32mp_bsec),
+ DM_DRIVER_GET(stm32mp_bsec),
&dev);
if (!ret)