arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet
The Zyxel NSA310s board has the network chip Marvell Alaska 88E1318S.
Use uclass mvgbe and the compatible driver M88E1310 driver to bring
up Ethernet.
- Use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Remove CONFIG_RESET_PHY_R.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add phy mode RGMII to kirkwood-nsa310s.dts
- Miscellaneous changes: Move constants to .c file and remove header file
board/zyxel/nsa310s/nsa310s.h, add support for large USB and SATA HDDs,
use BIT macro, add/cleanup comments, and cosmetic changes.
Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220412201820.10291-1-mibodhi@gmail.com/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index 485a3fe..1e6b8d8 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com>
+ * Copyright (C) 2015, 2021-2022 Tony Dinh <mibodhi@gmail.com>
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Luka Perkov <luka.perkov@sartura.hr>
@@ -11,8 +11,6 @@
#include "mv-common.h"
-/* environment variables configuration */
-
/* default environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -24,14 +22,11 @@
"bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0"
/* Ethernet driver configuration */
-#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 1
-#endif /* CONFIG_CMD_NET */
-/* SATA driver configuration */
-#ifdef CONFIG_SATA
+/* Support large HDDs for USB and SATA */
#define CONFIG_LBA48
-#endif /* CONFIG_SATA */
+#define CONFIG_SYS_64BIT_LBA
#endif /* _CONFIG_NSA310S_H */