env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.
Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 61298ab..4ddc7e1 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -298,11 +298,11 @@
#endif
/* default to the first detected enet dev */
- if (!getenv("ethprime")) {
+ if (!env_get("ethprime")) {
struct eth_device *dev = eth_get_dev_by_index(0);
if (dev) {
env_set("ethprime", dev->name);
- printf("set ethprime to %s\n", getenv("ethprime"));
+ printf("set ethprime to %s\n", env_get("ethprime"));
}
}
@@ -579,7 +579,7 @@
*/
void get_board_serial(struct tag_serialnr *serialnr)
{
- char *serial = getenv("serial#");
+ char *serial = env_get("serial#");
if (serial) {
serialnr->high = 0;
@@ -658,7 +658,7 @@
int quiet; /* Quiet or minimal output mode */
quiet = 0;
- p = getenv("quiet");
+ p = env_get("quiet");
if (p)
quiet = simple_strtol(p, NULL, 10);
else
@@ -746,7 +746,7 @@
for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
str[i] = tolower(info->model[i]);
env_set("model", str);
- if (!getenv("fdt_file")) {
+ if (!env_get("fdt_file")) {
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file", fdt);
}
@@ -770,11 +770,11 @@
/* initialize env from EEPROM */
if (test_bit(EECONFIG_ETH0, info->config) &&
- !getenv("ethaddr")) {
+ !env_get("ethaddr")) {
eth_env_set_enetaddr("ethaddr", info->mac0);
}
if (test_bit(EECONFIG_ETH1, info->config) &&
- !getenv("eth1addr")) {
+ !env_get("eth1addr")) {
eth_env_set_enetaddr("eth1addr", info->mac1);
}
@@ -788,7 +788,7 @@
}
/* Set a non-initialized hwconfig based on board configuration */
- if (!strcmp(getenv("hwconfig"), "_UNKNOWN_")) {
+ if (!strcmp(env_get("hwconfig"), "_UNKNOWN_")) {
buf[0] = 0;
if (gpio_cfg[board_type].rs232_en)
strcat(buf, "rs232;");
@@ -1035,7 +1035,7 @@
int j;
sprintf(mac, "eth1addr");
- tmp = getenv(mac);
+ tmp = env_get(mac);
if (tmp) {
for (j = 0; j < 6; j++) {
mac_addr[j] = tmp ?
@@ -1118,8 +1118,8 @@
{ "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
};
- const char *model = getenv("model");
- const char *display = getenv("display");
+ const char *model = env_get("model");
+ const char *display = env_get("display");
int i;
char rev = 0;
@@ -1131,7 +1131,7 @@
}
}
- if (getenv("fdt_noauto")) {
+ if (env_get("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
return 0;
}
@@ -1152,15 +1152,15 @@
printf(" Adjusting FDT per EEPROM for %s...\n", model);
/* board serial number */
- fdt_setprop(blob, 0, "system-serial", getenv("serial#"),
- strlen(getenv("serial#")) + 1);
+ fdt_setprop(blob, 0, "system-serial", env_get("serial#"),
+ strlen(env_get("serial#")) + 1);
/* board (model contains model from device-tree) */
fdt_setprop(blob, 0, "board", info->model,
strlen((const char *)info->model) + 1);
/* set desired digital video capture format */
- ft_sethdmiinfmt(blob, getenv("hdmiinfmt"));
+ ft_sethdmiinfmt(blob, env_get("hdmiinfmt"));
/*
* Board model specific fixups
@@ -1315,7 +1315,7 @@
}
#if defined(CONFIG_CMD_PCI)
- if (!getenv("nopcifixup"))
+ if (!env_get("nopcifixup"))
ft_board_pci_fixup(blob, bd);
#endif
@@ -1324,7 +1324,7 @@
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.
*/
- if (getenv("fdt_noconfig")) {
+ if (env_get("fdt_noconfig")) {
puts(" Skiping periperhal config (fdt_noconfig defined)\n");
return 0;
}