| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT=y |
| CONFIG_SYS_DCACHE_OFF=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_ARCH_KIRKWOOD=y |
| CONFIG_SYS_KWD_CONFIG="board/d-link/dns325/kwbimage.cfg" |
| CONFIG_TEXT_BASE=0x600000 |
| CONFIG_NR_DRAM_BANKS=1 |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 |
| CONFIG_TARGET_DNS325=y |
| CONFIG_ENV_SIZE=0x20000 |
| CONFIG_ENV_OFFSET=0xE0000 |
| CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dns325" |
| CONFIG_SYS_LOAD_ADDR=0x800000 |
| CONFIG_IDENT_STRING="\nD-Link DNS-325" |
| # CONFIG_SYS_MALLOC_F is not set |
| CONFIG_BOOTDELAY=3 |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="if test -n ${bootenv} && usb start; then if run loadbootenv; then echo Loaded environment ${bootenv} from usb;run importbootenv;fi;if test -n ${bootenvcmd}; then echo Running bootenvcmd ...;run bootenvcmd;fi;fi;run setnandbootenv subbootcmd;" |
| CONFIG_USE_PREBOOT=y |
| CONFIG_CONSOLE_MUX=y |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_RESET_PHY_R=y |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_CMD_IDE=y |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_SYS_DISABLE_AUTOLOAD=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_FAT=y |
| CONFIG_CMD_JFFS2=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)" |
| CONFIG_CMD_UBI=y |
| CONFIG_ISO_PARTITION=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_NETCONSOLE=y |
| CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y |
| CONFIG_SYS_ATA_STRIDE=4 |
| CONFIG_SYS_ATA_DATA_OFFSET=0x100 |
| CONFIG_SYS_ATA_REG_OFFSET=0x100 |
| CONFIG_SYS_ATA_ALT_OFFSET=0x100 |
| CONFIG_LBA48=y |
| CONFIG_KIRKWOOD_GPIO=y |
| # CONFIG_MMC is not set |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_MVGBE=y |
| CONFIG_MII=y |
| CONFIG_DM_RTC=y |
| CONFIG_RTC_MV=y |
| CONFIG_SYS_NS16550_SERIAL=y |
| CONFIG_SYS_NS16550_REG_SIZE=-4 |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_STORAGE=y |