| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) Copyright 2015 Google, Inc |
| * (C) 2017 Theobroma Systems Design und Consulting GmbH |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <dt-structs.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <syscon.h> |
| #include <bitfield.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/global_data.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/clock/rk3399-cru.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/printk.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct rk3399_clk_plat { |
| struct dtd_rockchip_rk3399_cru dtd; |
| }; |
| |
| struct rk3399_pmuclk_plat { |
| struct dtd_rockchip_rk3399_pmucru dtd; |
| }; |
| #endif |
| |
| struct pll_div { |
| u32 refdiv; |
| u32 fbdiv; |
| u32 postdiv1; |
| u32 postdiv2; |
| u32 frac; |
| }; |
| |
| #define RATE_TO_DIV(input_rate, output_rate) \ |
| ((input_rate) / (output_rate) - 1) |
| #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) |
| |
| #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ |
| .refdiv = _refdiv,\ |
| .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\ |
| .postdiv1 = _postdiv1, .postdiv2 = _postdiv2}; |
| |
| static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); |
| static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); |
| #if !defined(CONFIG_SPL_BUILD) |
| static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); |
| #endif |
| |
| static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600 * MHz, 3, 1, 1); |
| static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1); |
| |
| static const struct pll_div *apll_l_cfgs[] = { |
| [APLL_L_1600_MHZ] = &apll_l_1600_cfg, |
| [APLL_L_600_MHZ] = &apll_l_600_cfg, |
| }; |
| |
| static const struct pll_div apll_b_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1); |
| static const struct pll_div *apll_b_cfgs[] = { |
| [APLL_B_600_MHZ] = &apll_b_600_cfg, |
| }; |
| |
| enum { |
| /* PLL_CON0 */ |
| PLL_FBDIV_MASK = 0xfff, |
| PLL_FBDIV_SHIFT = 0, |
| |
| /* PLL_CON1 */ |
| PLL_POSTDIV2_SHIFT = 12, |
| PLL_POSTDIV2_MASK = 0x7 << PLL_POSTDIV2_SHIFT, |
| PLL_POSTDIV1_SHIFT = 8, |
| PLL_POSTDIV1_MASK = 0x7 << PLL_POSTDIV1_SHIFT, |
| PLL_REFDIV_MASK = 0x3f, |
| PLL_REFDIV_SHIFT = 0, |
| |
| /* PLL_CON2 */ |
| PLL_LOCK_STATUS_SHIFT = 31, |
| PLL_LOCK_STATUS_MASK = 1 << PLL_LOCK_STATUS_SHIFT, |
| PLL_FRACDIV_MASK = 0xffffff, |
| PLL_FRACDIV_SHIFT = 0, |
| |
| /* PLL_CON3 */ |
| PLL_MODE_SHIFT = 8, |
| PLL_MODE_MASK = 3 << PLL_MODE_SHIFT, |
| PLL_MODE_SLOW = 0, |
| PLL_MODE_NORM, |
| PLL_MODE_DEEP, |
| PLL_DSMPD_SHIFT = 3, |
| PLL_DSMPD_MASK = 1 << PLL_DSMPD_SHIFT, |
| PLL_INTEGER_MODE = 1, |
| |
| /* PMUCRU_CLKSEL_CON0 */ |
| PMU_PCLK_DIV_CON_MASK = 0x1f, |
| PMU_PCLK_DIV_CON_SHIFT = 0, |
| |
| /* PMUCRU_CLKSEL_CON1 */ |
| SPI3_PLL_SEL_SHIFT = 7, |
| SPI3_PLL_SEL_MASK = 1 << SPI3_PLL_SEL_SHIFT, |
| SPI3_PLL_SEL_24M = 0, |
| SPI3_PLL_SEL_PPLL = 1, |
| SPI3_DIV_CON_SHIFT = 0x0, |
| SPI3_DIV_CON_MASK = 0x7f, |
| |
| /* PMUCRU_CLKSEL_CON2 */ |
| I2C_DIV_CON_MASK = 0x7f, |
| CLK_I2C8_DIV_CON_SHIFT = 8, |
| CLK_I2C0_DIV_CON_SHIFT = 0, |
| |
| /* PMUCRU_CLKSEL_CON3 */ |
| CLK_I2C4_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON0 */ |
| ACLKM_CORE_L_DIV_CON_SHIFT = 8, |
| ACLKM_CORE_L_DIV_CON_MASK = 0x1f << ACLKM_CORE_L_DIV_CON_SHIFT, |
| CLK_CORE_L_PLL_SEL_SHIFT = 6, |
| CLK_CORE_L_PLL_SEL_MASK = 3 << CLK_CORE_L_PLL_SEL_SHIFT, |
| CLK_CORE_L_PLL_SEL_ALPLL = 0x0, |
| CLK_CORE_L_PLL_SEL_ABPLL = 0x1, |
| CLK_CORE_L_PLL_SEL_DPLL = 0x10, |
| CLK_CORE_L_PLL_SEL_GPLL = 0x11, |
| CLK_CORE_L_DIV_MASK = 0x1f, |
| CLK_CORE_L_DIV_SHIFT = 0, |
| |
| /* CLKSEL_CON1 */ |
| PCLK_DBG_L_DIV_SHIFT = 0x8, |
| PCLK_DBG_L_DIV_MASK = 0x1f << PCLK_DBG_L_DIV_SHIFT, |
| ATCLK_CORE_L_DIV_SHIFT = 0, |
| ATCLK_CORE_L_DIV_MASK = 0x1f << ATCLK_CORE_L_DIV_SHIFT, |
| |
| /* CLKSEL_CON2 */ |
| ACLKM_CORE_B_DIV_CON_SHIFT = 8, |
| ACLKM_CORE_B_DIV_CON_MASK = 0x1f << ACLKM_CORE_B_DIV_CON_SHIFT, |
| CLK_CORE_B_PLL_SEL_SHIFT = 6, |
| CLK_CORE_B_PLL_SEL_MASK = 3 << CLK_CORE_B_PLL_SEL_SHIFT, |
| CLK_CORE_B_PLL_SEL_ALPLL = 0x0, |
| CLK_CORE_B_PLL_SEL_ABPLL = 0x1, |
| CLK_CORE_B_PLL_SEL_DPLL = 0x10, |
| CLK_CORE_B_PLL_SEL_GPLL = 0x11, |
| CLK_CORE_B_DIV_MASK = 0x1f, |
| CLK_CORE_B_DIV_SHIFT = 0, |
| |
| /* CLKSEL_CON3 */ |
| PCLK_DBG_B_DIV_SHIFT = 0x8, |
| PCLK_DBG_B_DIV_MASK = 0x1f << PCLK_DBG_B_DIV_SHIFT, |
| ATCLK_CORE_B_DIV_SHIFT = 0, |
| ATCLK_CORE_B_DIV_MASK = 0x1f << ATCLK_CORE_B_DIV_SHIFT, |
| |
| /* CLKSEL_CON14 */ |
| PCLK_PERIHP_DIV_CON_SHIFT = 12, |
| PCLK_PERIHP_DIV_CON_MASK = 0x7 << PCLK_PERIHP_DIV_CON_SHIFT, |
| HCLK_PERIHP_DIV_CON_SHIFT = 8, |
| HCLK_PERIHP_DIV_CON_MASK = 3 << HCLK_PERIHP_DIV_CON_SHIFT, |
| ACLK_PERIHP_PLL_SEL_SHIFT = 7, |
| ACLK_PERIHP_PLL_SEL_MASK = 1 << ACLK_PERIHP_PLL_SEL_SHIFT, |
| ACLK_PERIHP_PLL_SEL_CPLL = 0, |
| ACLK_PERIHP_PLL_SEL_GPLL = 1, |
| ACLK_PERIHP_DIV_CON_SHIFT = 0, |
| ACLK_PERIHP_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON21 */ |
| ACLK_EMMC_PLL_SEL_SHIFT = 7, |
| ACLK_EMMC_PLL_SEL_MASK = 0x1 << ACLK_EMMC_PLL_SEL_SHIFT, |
| ACLK_EMMC_PLL_SEL_GPLL = 0x1, |
| ACLK_EMMC_DIV_CON_SHIFT = 0, |
| ACLK_EMMC_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON22 */ |
| CLK_EMMC_PLL_SHIFT = 8, |
| CLK_EMMC_PLL_MASK = 0x7 << CLK_EMMC_PLL_SHIFT, |
| CLK_EMMC_PLL_SEL_GPLL = 0x1, |
| CLK_EMMC_PLL_SEL_24M = 0x5, |
| CLK_EMMC_DIV_CON_SHIFT = 0, |
| CLK_EMMC_DIV_CON_MASK = 0x7f << CLK_EMMC_DIV_CON_SHIFT, |
| |
| /* CLKSEL_CON23 */ |
| PCLK_PERILP0_DIV_CON_SHIFT = 12, |
| PCLK_PERILP0_DIV_CON_MASK = 0x7 << PCLK_PERILP0_DIV_CON_SHIFT, |
| HCLK_PERILP0_DIV_CON_SHIFT = 8, |
| HCLK_PERILP0_DIV_CON_MASK = 3 << HCLK_PERILP0_DIV_CON_SHIFT, |
| ACLK_PERILP0_PLL_SEL_SHIFT = 7, |
| ACLK_PERILP0_PLL_SEL_MASK = 1 << ACLK_PERILP0_PLL_SEL_SHIFT, |
| ACLK_PERILP0_PLL_SEL_CPLL = 0, |
| ACLK_PERILP0_PLL_SEL_GPLL = 1, |
| ACLK_PERILP0_DIV_CON_SHIFT = 0, |
| ACLK_PERILP0_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON25 */ |
| PCLK_PERILP1_DIV_CON_SHIFT = 8, |
| PCLK_PERILP1_DIV_CON_MASK = 0x7 << PCLK_PERILP1_DIV_CON_SHIFT, |
| HCLK_PERILP1_PLL_SEL_SHIFT = 7, |
| HCLK_PERILP1_PLL_SEL_MASK = 1 << HCLK_PERILP1_PLL_SEL_SHIFT, |
| HCLK_PERILP1_PLL_SEL_CPLL = 0, |
| HCLK_PERILP1_PLL_SEL_GPLL = 1, |
| HCLK_PERILP1_DIV_CON_SHIFT = 0, |
| HCLK_PERILP1_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON26 */ |
| CLK_SARADC_DIV_CON_SHIFT = 8, |
| CLK_SARADC_DIV_CON_MASK = GENMASK(15, 8), |
| CLK_SARADC_DIV_CON_WIDTH = 8, |
| |
| /* CLKSEL_CON27 */ |
| CLK_TSADC_SEL_X24M = 0x0, |
| CLK_TSADC_SEL_SHIFT = 15, |
| CLK_TSADC_SEL_MASK = 1 << CLK_TSADC_SEL_SHIFT, |
| CLK_TSADC_DIV_CON_SHIFT = 0, |
| CLK_TSADC_DIV_CON_MASK = 0x3ff, |
| |
| /* CLKSEL_CON47 & CLKSEL_CON48 */ |
| ACLK_VOP_PLL_SEL_SHIFT = 6, |
| ACLK_VOP_PLL_SEL_MASK = 0x3 << ACLK_VOP_PLL_SEL_SHIFT, |
| ACLK_VOP_PLL_SEL_CPLL = 0x1, |
| ACLK_VOP_DIV_CON_SHIFT = 0, |
| ACLK_VOP_DIV_CON_MASK = 0x1f << ACLK_VOP_DIV_CON_SHIFT, |
| |
| /* CLKSEL_CON49 & CLKSEL_CON50 */ |
| DCLK_VOP_DCLK_SEL_SHIFT = 11, |
| DCLK_VOP_DCLK_SEL_MASK = 1 << DCLK_VOP_DCLK_SEL_SHIFT, |
| DCLK_VOP_DCLK_SEL_DIVOUT = 0, |
| DCLK_VOP_PLL_SEL_SHIFT = 8, |
| DCLK_VOP_PLL_SEL_MASK = 3 << DCLK_VOP_PLL_SEL_SHIFT, |
| DCLK_VOP_PLL_SEL_VPLL = 0, |
| DCLK_VOP_DIV_CON_MASK = 0xff, |
| DCLK_VOP_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON57 */ |
| PCLK_ALIVE_DIV_CON_SHIFT = 0, |
| PCLK_ALIVE_DIV_CON_MASK = 0x1f << PCLK_ALIVE_DIV_CON_SHIFT, |
| |
| /* CLKSEL_CON58 */ |
| CLK_SPI_PLL_SEL_WIDTH = 1, |
| CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1), |
| CLK_SPI_PLL_SEL_CPLL = 0, |
| CLK_SPI_PLL_SEL_GPLL = 1, |
| CLK_SPI_PLL_DIV_CON_WIDTH = 7, |
| CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1), |
| |
| CLK_SPI5_PLL_DIV_CON_SHIFT = 8, |
| CLK_SPI5_PLL_SEL_SHIFT = 15, |
| |
| /* CLKSEL_CON59 */ |
| CLK_SPI1_PLL_SEL_SHIFT = 15, |
| CLK_SPI1_PLL_DIV_CON_SHIFT = 8, |
| CLK_SPI0_PLL_SEL_SHIFT = 7, |
| CLK_SPI0_PLL_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON60 */ |
| CLK_SPI4_PLL_SEL_SHIFT = 15, |
| CLK_SPI4_PLL_DIV_CON_SHIFT = 8, |
| CLK_SPI2_PLL_SEL_SHIFT = 7, |
| CLK_SPI2_PLL_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON61 */ |
| CLK_I2C_PLL_SEL_MASK = 1, |
| CLK_I2C_PLL_SEL_CPLL = 0, |
| CLK_I2C_PLL_SEL_GPLL = 1, |
| CLK_I2C5_PLL_SEL_SHIFT = 15, |
| CLK_I2C5_DIV_CON_SHIFT = 8, |
| CLK_I2C1_PLL_SEL_SHIFT = 7, |
| CLK_I2C1_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON62 */ |
| CLK_I2C6_PLL_SEL_SHIFT = 15, |
| CLK_I2C6_DIV_CON_SHIFT = 8, |
| CLK_I2C2_PLL_SEL_SHIFT = 7, |
| CLK_I2C2_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON63 */ |
| CLK_I2C7_PLL_SEL_SHIFT = 15, |
| CLK_I2C7_DIV_CON_SHIFT = 8, |
| CLK_I2C3_PLL_SEL_SHIFT = 7, |
| CLK_I2C3_DIV_CON_SHIFT = 0, |
| |
| /* CRU_SOFTRST_CON4 */ |
| RESETN_DDR0_REQ_SHIFT = 8, |
| RESETN_DDR0_REQ_MASK = 1 << RESETN_DDR0_REQ_SHIFT, |
| RESETN_DDRPHY0_REQ_SHIFT = 9, |
| RESETN_DDRPHY0_REQ_MASK = 1 << RESETN_DDRPHY0_REQ_SHIFT, |
| RESETN_DDR1_REQ_SHIFT = 12, |
| RESETN_DDR1_REQ_MASK = 1 << RESETN_DDR1_REQ_SHIFT, |
| RESETN_DDRPHY1_REQ_SHIFT = 13, |
| RESETN_DDRPHY1_REQ_MASK = 1 << RESETN_DDRPHY1_REQ_SHIFT, |
| }; |
| |
| #define VCO_MAX_KHZ (3200 * (MHz / KHz)) |
| #define VCO_MIN_KHZ (800 * (MHz / KHz)) |
| #define OUTPUT_MAX_KHZ (3200 * (MHz / KHz)) |
| #define OUTPUT_MIN_KHZ (16 * (MHz / KHz)) |
| |
| /* |
| * the div restructions of pll in integer mode, these are defined in |
| * * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0 |
| */ |
| #define PLL_DIV_MIN 16 |
| #define PLL_DIV_MAX 3200 |
| |
| /* |
| * How to calculate the PLL(from TRM V0.3 Part 1 Page 63): |
| * Formulas also embedded within the Fractional PLL Verilog model: |
| * If DSMPD = 1 (DSM is disabled, "integer mode") |
| * FOUTVCO = FREF / REFDIV * FBDIV |
| * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2 |
| * Where: |
| * FOUTVCO = Fractional PLL non-divided output frequency |
| * FOUTPOSTDIV = Fractional PLL divided output frequency |
| * (output of second post divider) |
| * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input) |
| * REFDIV = Fractional PLL input reference clock divider |
| * FBDIV = Integer value programmed into feedback divide |
| * |
| */ |
| static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div) |
| { |
| /* All 8 PLLs have same VCO and output frequency range restrictions. */ |
| u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv; |
| u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2; |
| |
| debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, " |
| "postdiv2=%d, vco=%u khz, output=%u khz\n", |
| pll_con, div->fbdiv, div->refdiv, div->postdiv1, |
| div->postdiv2, vco_khz, output_khz); |
| assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ && |
| output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ && |
| div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX); |
| |
| /* |
| * When power on or changing PLL setting, |
| * we must force PLL into slow mode to ensure output stable clock. |
| */ |
| rk_clrsetreg(&pll_con[3], PLL_MODE_MASK, |
| PLL_MODE_SLOW << PLL_MODE_SHIFT); |
| |
| /* use integer mode */ |
| rk_clrsetreg(&pll_con[3], PLL_DSMPD_MASK, |
| PLL_INTEGER_MODE << PLL_DSMPD_SHIFT); |
| |
| rk_clrsetreg(&pll_con[0], PLL_FBDIV_MASK, |
| div->fbdiv << PLL_FBDIV_SHIFT); |
| rk_clrsetreg(&pll_con[1], |
| PLL_POSTDIV2_MASK | PLL_POSTDIV1_MASK | |
| PLL_REFDIV_MASK | PLL_REFDIV_SHIFT, |
| (div->postdiv2 << PLL_POSTDIV2_SHIFT) | |
| (div->postdiv1 << PLL_POSTDIV1_SHIFT) | |
| (div->refdiv << PLL_REFDIV_SHIFT)); |
| |
| /* waiting for pll lock */ |
| while (!(readl(&pll_con[2]) & (1 << PLL_LOCK_STATUS_SHIFT))) |
| udelay(1); |
| |
| /* pll enter normal mode */ |
| rk_clrsetreg(&pll_con[3], PLL_MODE_MASK, |
| PLL_MODE_NORM << PLL_MODE_SHIFT); |
| } |
| |
| static int pll_para_config(u32 freq_hz, struct pll_div *div) |
| { |
| u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0; |
| u32 postdiv1, postdiv2 = 1; |
| u32 fref_khz; |
| u32 diff_khz, best_diff_khz; |
| const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16; |
| const u32 max_postdiv1 = 7, max_postdiv2 = 7; |
| u32 vco_khz; |
| u32 freq_khz = freq_hz / KHz; |
| |
| if (!freq_hz) { |
| printf("%s: the frequency can't be 0 Hz\n", __func__); |
| return -1; |
| } |
| |
| postdiv1 = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz); |
| if (postdiv1 > max_postdiv1) { |
| postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1); |
| postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2); |
| } |
| |
| vco_khz = freq_khz * postdiv1 * postdiv2; |
| |
| if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ || |
| postdiv2 > max_postdiv2) { |
| printf("%s: Cannot find out a supported VCO" |
| " for Frequency (%uHz).\n", __func__, freq_hz); |
| return -1; |
| } |
| |
| div->postdiv1 = postdiv1; |
| div->postdiv2 = postdiv2; |
| |
| best_diff_khz = vco_khz; |
| for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) { |
| fref_khz = ref_khz / refdiv; |
| |
| fbdiv = vco_khz / fref_khz; |
| if (fbdiv >= max_fbdiv || fbdiv <= min_fbdiv) |
| continue; |
| diff_khz = vco_khz - fbdiv * fref_khz; |
| if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) { |
| fbdiv++; |
| diff_khz = fref_khz - diff_khz; |
| } |
| |
| if (diff_khz >= best_diff_khz) |
| continue; |
| |
| best_diff_khz = diff_khz; |
| div->refdiv = refdiv; |
| div->fbdiv = fbdiv; |
| } |
| |
| if (best_diff_khz > 4 * (MHz / KHz)) { |
| printf("%s: Failed to match output frequency %u, " |
| "difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz, |
| best_diff_khz * KHz); |
| return -1; |
| } |
| return 0; |
| } |
| |
| void rk3399_configure_cpu_l(struct rockchip_cru *cru, |
| enum apll_l_frequencies apll_l_freq) |
| { |
| u32 aclkm_div; |
| u32 pclk_dbg_div; |
| u32 atclk_div; |
| |
| /* Setup cluster L */ |
| rkclk_set_pll(&cru->apll_l_con[0], apll_l_cfgs[apll_l_freq]); |
| |
| aclkm_div = LPLL_HZ / ACLKM_CORE_L_HZ - 1; |
| assert((aclkm_div + 1) * ACLKM_CORE_L_HZ == LPLL_HZ && |
| aclkm_div < 0x1f); |
| |
| pclk_dbg_div = LPLL_HZ / PCLK_DBG_L_HZ - 1; |
| assert((pclk_dbg_div + 1) * PCLK_DBG_L_HZ == LPLL_HZ && |
| pclk_dbg_div < 0x1f); |
| |
| atclk_div = LPLL_HZ / ATCLK_CORE_L_HZ - 1; |
| assert((atclk_div + 1) * ATCLK_CORE_L_HZ == LPLL_HZ && |
| atclk_div < 0x1f); |
| |
| rk_clrsetreg(&cru->clksel_con[0], |
| ACLKM_CORE_L_DIV_CON_MASK | CLK_CORE_L_PLL_SEL_MASK | |
| CLK_CORE_L_DIV_MASK, |
| aclkm_div << ACLKM_CORE_L_DIV_CON_SHIFT | |
| CLK_CORE_L_PLL_SEL_ALPLL << CLK_CORE_L_PLL_SEL_SHIFT | |
| 0 << CLK_CORE_L_DIV_SHIFT); |
| |
| rk_clrsetreg(&cru->clksel_con[1], |
| PCLK_DBG_L_DIV_MASK | ATCLK_CORE_L_DIV_MASK, |
| pclk_dbg_div << PCLK_DBG_L_DIV_SHIFT | |
| atclk_div << ATCLK_CORE_L_DIV_SHIFT); |
| } |
| |
| void rk3399_configure_cpu_b(struct rockchip_cru *cru, |
| enum apll_b_frequencies apll_b_freq) |
| { |
| u32 aclkm_div; |
| u32 pclk_dbg_div; |
| u32 atclk_div; |
| |
| /* Setup cluster B */ |
| rkclk_set_pll(&cru->apll_b_con[0], apll_b_cfgs[apll_b_freq]); |
| |
| aclkm_div = BPLL_HZ / ACLKM_CORE_B_HZ - 1; |
| assert((aclkm_div + 1) * ACLKM_CORE_B_HZ == BPLL_HZ && |
| aclkm_div < 0x1f); |
| |
| pclk_dbg_div = BPLL_HZ / PCLK_DBG_B_HZ - 1; |
| assert((pclk_dbg_div + 1) * PCLK_DBG_B_HZ == BPLL_HZ && |
| pclk_dbg_div < 0x1f); |
| |
| atclk_div = BPLL_HZ / ATCLK_CORE_B_HZ - 1; |
| assert((atclk_div + 1) * ATCLK_CORE_B_HZ == BPLL_HZ && |
| atclk_div < 0x1f); |
| |
| rk_clrsetreg(&cru->clksel_con[2], |
| ACLKM_CORE_B_DIV_CON_MASK | CLK_CORE_B_PLL_SEL_MASK | |
| CLK_CORE_B_DIV_MASK, |
| aclkm_div << ACLKM_CORE_B_DIV_CON_SHIFT | |
| CLK_CORE_B_PLL_SEL_ABPLL << CLK_CORE_B_PLL_SEL_SHIFT | |
| 0 << CLK_CORE_B_DIV_SHIFT); |
| |
| rk_clrsetreg(&cru->clksel_con[3], |
| PCLK_DBG_B_DIV_MASK | ATCLK_CORE_B_DIV_MASK, |
| pclk_dbg_div << PCLK_DBG_B_DIV_SHIFT | |
| atclk_div << ATCLK_CORE_B_DIV_SHIFT); |
| } |
| |
| #define I2C_CLK_REG_MASK(bus) \ |
| (I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT | \ |
| CLK_I2C_PLL_SEL_MASK << CLK_I2C ##bus## _PLL_SEL_SHIFT) |
| |
| #define I2C_CLK_REG_VALUE(bus, clk_div) \ |
| ((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT | \ |
| CLK_I2C_PLL_SEL_GPLL << CLK_I2C ##bus## _PLL_SEL_SHIFT) |
| |
| #define I2C_CLK_DIV_VALUE(con, bus) \ |
| ((con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & I2C_DIV_CON_MASK) |
| |
| #define I2C_PMUCLK_REG_MASK(bus) \ |
| (I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT) |
| |
| #define I2C_PMUCLK_REG_VALUE(bus, clk_div) \ |
| ((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT) |
| |
| static ulong rk3399_i2c_get_clk(struct rockchip_cru *cru, ulong clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case SCLK_I2C1: |
| con = readl(&cru->clksel_con[61]); |
| div = I2C_CLK_DIV_VALUE(con, 1); |
| break; |
| case SCLK_I2C2: |
| con = readl(&cru->clksel_con[62]); |
| div = I2C_CLK_DIV_VALUE(con, 2); |
| break; |
| case SCLK_I2C3: |
| con = readl(&cru->clksel_con[63]); |
| div = I2C_CLK_DIV_VALUE(con, 3); |
| break; |
| case SCLK_I2C5: |
| con = readl(&cru->clksel_con[61]); |
| div = I2C_CLK_DIV_VALUE(con, 5); |
| break; |
| case SCLK_I2C6: |
| con = readl(&cru->clksel_con[62]); |
| div = I2C_CLK_DIV_VALUE(con, 6); |
| break; |
| case SCLK_I2C7: |
| con = readl(&cru->clksel_con[63]); |
| div = I2C_CLK_DIV_VALUE(con, 7); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rk3399_i2c_set_clk(struct rockchip_cru *cru, ulong clk_id, uint hz) |
| { |
| int src_clk_div; |
| |
| /* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/ |
| src_clk_div = GPLL_HZ / hz; |
| assert(src_clk_div - 1 < 127); |
| |
| switch (clk_id) { |
| case SCLK_I2C1: |
| rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(1), |
| I2C_CLK_REG_VALUE(1, src_clk_div)); |
| break; |
| case SCLK_I2C2: |
| rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(2), |
| I2C_CLK_REG_VALUE(2, src_clk_div)); |
| break; |
| case SCLK_I2C3: |
| rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(3), |
| I2C_CLK_REG_VALUE(3, src_clk_div)); |
| break; |
| case SCLK_I2C5: |
| rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(5), |
| I2C_CLK_REG_VALUE(5, src_clk_div)); |
| break; |
| case SCLK_I2C6: |
| rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(6), |
| I2C_CLK_REG_VALUE(6, src_clk_div)); |
| break; |
| case SCLK_I2C7: |
| rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(7), |
| I2C_CLK_REG_VALUE(7, src_clk_div)); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return rk3399_i2c_get_clk(cru, clk_id); |
| } |
| |
| /* |
| * RK3399 SPI clocks have a common divider-width (7 bits) and a single bit |
| * to select either CPLL or GPLL as the clock-parent. The location within |
| * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable. |
| */ |
| |
| struct spi_clkreg { |
| u8 reg; /* CLKSEL_CON[reg] register in CRU */ |
| u8 div_shift; |
| u8 sel_shift; |
| }; |
| |
| /* |
| * The entries are numbered relative to their offset from SCLK_SPI0. |
| * |
| * Note that SCLK_SPI3 (which is configured via PMUCRU and requires different |
| * logic is not supported). |
| */ |
| static const struct spi_clkreg spi_clkregs[] = { |
| [0] = { .reg = 59, |
| .div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT, |
| .sel_shift = CLK_SPI0_PLL_SEL_SHIFT, }, |
| [1] = { .reg = 59, |
| .div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT, |
| .sel_shift = CLK_SPI1_PLL_SEL_SHIFT, }, |
| [2] = { .reg = 60, |
| .div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT, |
| .sel_shift = CLK_SPI2_PLL_SEL_SHIFT, }, |
| [3] = { .reg = 60, |
| .div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT, |
| .sel_shift = CLK_SPI4_PLL_SEL_SHIFT, }, |
| [4] = { .reg = 58, |
| .div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT, |
| .sel_shift = CLK_SPI5_PLL_SEL_SHIFT, }, |
| }; |
| |
| static ulong rk3399_spi_get_clk(struct rockchip_cru *cru, ulong clk_id) |
| { |
| const struct spi_clkreg *spiclk = NULL; |
| u32 div, val; |
| |
| switch (clk_id) { |
| case SCLK_SPI0 ... SCLK_SPI5: |
| spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; |
| break; |
| |
| default: |
| pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id); |
| return -EINVAL; |
| } |
| |
| val = readl(&cru->clksel_con[spiclk->reg]); |
| div = bitfield_extract(val, spiclk->div_shift, |
| CLK_SPI_PLL_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rk3399_spi_set_clk(struct rockchip_cru *cru, ulong clk_id, uint hz) |
| { |
| const struct spi_clkreg *spiclk = NULL; |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; |
| assert(src_clk_div < 128); |
| |
| switch (clk_id) { |
| case SCLK_SPI1 ... SCLK_SPI5: |
| spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; |
| break; |
| |
| default: |
| pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id); |
| return -EINVAL; |
| } |
| |
| rk_clrsetreg(&cru->clksel_con[spiclk->reg], |
| ((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) | |
| (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)), |
| ((src_clk_div << spiclk->div_shift) | |
| (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift))); |
| |
| return rk3399_spi_get_clk(cru, clk_id); |
| } |
| |
| static ulong rk3399_vop_set_clk(struct rockchip_cru *cru, ulong clk_id, u32 hz) |
| { |
| struct pll_div vpll_config = {0}; |
| int aclk_vop = 198 * MHz; |
| void *aclkreg_addr, *dclkreg_addr; |
| u32 div; |
| |
| switch (clk_id) { |
| case DCLK_VOP0: |
| aclkreg_addr = &cru->clksel_con[47]; |
| dclkreg_addr = &cru->clksel_con[49]; |
| break; |
| case DCLK_VOP1: |
| aclkreg_addr = &cru->clksel_con[48]; |
| dclkreg_addr = &cru->clksel_con[50]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| /* vop aclk source clk: cpll */ |
| div = CPLL_HZ / aclk_vop; |
| assert(div - 1 < 32); |
| |
| rk_clrsetreg(aclkreg_addr, |
| ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK, |
| ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT | |
| (div - 1) << ACLK_VOP_DIV_CON_SHIFT); |
| |
| /* vop dclk source from vpll, and equals to vpll(means div == 1) */ |
| if (pll_para_config(hz, &vpll_config)) |
| return -1; |
| |
| rkclk_set_pll(&cru->vpll_con[0], &vpll_config); |
| |
| rk_clrsetreg(dclkreg_addr, |
| DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK | |
| DCLK_VOP_DIV_CON_MASK, |
| DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT | |
| DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT | |
| (1 - 1) << DCLK_VOP_DIV_CON_SHIFT); |
| |
| return hz; |
| } |
| |
| static ulong rk3399_mmc_get_clk(struct rockchip_cru *cru, uint clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case HCLK_SDIO: |
| case SCLK_SDIO: |
| con = readl(&cru->clksel_con[15]); |
| /* dwmmc controller have internal div 2 */ |
| div = 2; |
| break; |
| case HCLK_SDMMC: |
| case SCLK_SDMMC: |
| con = readl(&cru->clksel_con[16]); |
| /* dwmmc controller have internal div 2 */ |
| div = 2; |
| break; |
| case SCLK_EMMC: |
| con = readl(&cru->clksel_con[22]); |
| div = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; |
| if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT |
| == CLK_EMMC_PLL_SEL_24M) |
| return DIV_TO_RATE(OSC_HZ, div); |
| else |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static void rk3399_dwmmc_set_clk(struct rockchip_cru *cru, |
| unsigned int con, ulong set_rate) |
| { |
| /* Select clk_sdmmc source from GPLL by default */ |
| /* mmc clock defaulg div 2 internal, provide double in cru */ |
| int src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate); |
| |
| if (src_clk_div > 128) { |
| /* use 24MHz source for 400KHz clock */ |
| src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); |
| assert(src_clk_div - 1 < 128); |
| rk_clrsetreg(&cru->clksel_con[con], |
| CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, |
| CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | |
| (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); |
| } else { |
| rk_clrsetreg(&cru->clksel_con[con], |
| CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, |
| CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT | |
| (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); |
| } |
| } |
| |
| static ulong rk3399_mmc_set_clk(struct rockchip_cru *cru, |
| ulong clk_id, ulong set_rate) |
| { |
| switch (clk_id) { |
| case HCLK_SDIO: |
| case SCLK_SDIO: |
| rk3399_dwmmc_set_clk(cru, 15, set_rate); |
| break; |
| case HCLK_SDMMC: |
| case SCLK_SDMMC: |
| rk3399_dwmmc_set_clk(cru, 16, set_rate); |
| break; |
| case SCLK_EMMC: { |
| int aclk_emmc = 198 * MHz; |
| /* Select aclk_emmc source from GPLL */ |
| int src_clk_div = DIV_ROUND_UP(GPLL_HZ, aclk_emmc); |
| |
| assert(src_clk_div - 1 < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[21], |
| ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK, |
| ACLK_EMMC_PLL_SEL_GPLL << ACLK_EMMC_PLL_SEL_SHIFT | |
| (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT); |
| |
| /* Select clk_emmc source from GPLL too */ |
| src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate); |
| assert(src_clk_div - 1 < 128); |
| |
| rk_clrsetreg(&cru->clksel_con[22], |
| CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, |
| CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT | |
| (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| return rk3399_mmc_get_clk(cru, clk_id); |
| } |
| |
| static ulong rk3399_gmac_set_clk(struct rockchip_cru *cru, ulong rate) |
| { |
| ulong ret; |
| |
| /* |
| * The RGMII CLK can be derived either from an external "clkin" |
| * or can be generated from internally by a divider from SCLK_MAC. |
| */ |
| if (readl(&cru->clksel_con[19]) & BIT(4)) { |
| /* An external clock will always generate the right rate... */ |
| ret = rate; |
| } else { |
| /* |
| * No platform uses an internal clock to date. |
| * Implement this once it becomes necessary and print an error |
| * if someone tries to use it (while it remains unimplemented). |
| */ |
| pr_err("%s: internal clock is UNIMPLEMENTED\n", __func__); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| #define PMUSGRF_DDR_RGN_CON16 0xff330040 |
| static ulong rk3399_ddr_set_clk(struct rockchip_cru *cru, |
| ulong set_rate) |
| { |
| struct pll_div dpll_cfg; |
| |
| /* IC ECO bug, need to set this register */ |
| writel(0xc000c000, PMUSGRF_DDR_RGN_CON16); |
| |
| /* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */ |
| switch (set_rate) { |
| case 50 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 2, .fbdiv = 75, .postdiv1 = 3, .postdiv2 = 6}; |
| break; |
| case 200 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1}; |
| break; |
| case 300 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1}; |
| break; |
| case 400 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 1, .fbdiv = 50, .postdiv1 = 3, .postdiv2 = 1}; |
| break; |
| case 666 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1}; |
| break; |
| case 800 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1}; |
| break; |
| case 933 * MHz: |
| dpll_cfg = (struct pll_div) |
| {.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1}; |
| break; |
| default: |
| pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate); |
| } |
| rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg); |
| |
| return set_rate; |
| } |
| |
| static ulong rk3399_alive_get_clk(struct rockchip_cru *cru) |
| { |
| u32 div, val; |
| |
| val = readl(&cru->clksel_con[57]); |
| div = (val & PCLK_ALIVE_DIV_CON_MASK) >> |
| PCLK_ALIVE_DIV_CON_SHIFT; |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rk3399_saradc_get_clk(struct rockchip_cru *cru) |
| { |
| u32 div, val; |
| |
| val = readl(&cru->clksel_con[26]); |
| div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT, |
| CLK_SARADC_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(OSC_HZ, div); |
| } |
| |
| static ulong rk3399_saradc_set_clk(struct rockchip_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1; |
| assert(src_clk_div < 128); |
| |
| rk_clrsetreg(&cru->clksel_con[26], |
| CLK_SARADC_DIV_CON_MASK, |
| src_clk_div << CLK_SARADC_DIV_CON_SHIFT); |
| |
| return rk3399_saradc_get_clk(cru); |
| } |
| |
| static ulong rk3399_clk_get_rate(struct clk *clk) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate = 0; |
| |
| switch (clk->id) { |
| case 0 ... 63: |
| return 0; |
| case HCLK_SDIO: |
| case SCLK_SDIO: |
| case HCLK_SDMMC: |
| case SCLK_SDMMC: |
| case SCLK_EMMC: |
| rate = rk3399_mmc_get_clk(priv->cru, clk->id); |
| break; |
| case SCLK_I2C1: |
| case SCLK_I2C2: |
| case SCLK_I2C3: |
| case SCLK_I2C5: |
| case SCLK_I2C6: |
| case SCLK_I2C7: |
| rate = rk3399_i2c_get_clk(priv->cru, clk->id); |
| break; |
| case SCLK_SPI0...SCLK_SPI5: |
| rate = rk3399_spi_get_clk(priv->cru, clk->id); |
| break; |
| case SCLK_UART0: |
| case SCLK_UART1: |
| case SCLK_UART2: |
| case SCLK_UART3: |
| return 24000000; |
| case PCLK_HDMI_CTRL: |
| break; |
| case DCLK_VOP0: |
| case DCLK_VOP1: |
| break; |
| case PCLK_EFUSE1024NS: |
| break; |
| case SCLK_SARADC: |
| rate = rk3399_saradc_get_clk(priv->cru); |
| break; |
| case ACLK_VIO: |
| case ACLK_HDCP: |
| case ACLK_GIC_PRE: |
| case PCLK_DDR: |
| break; |
| case PCLK_ALIVE: |
| case PCLK_WDT: |
| rate = rk3399_alive_get_clk(priv->cru); |
| break; |
| default: |
| log_debug("Unknown clock %lu\n", clk->id); |
| return -ENOENT; |
| } |
| |
| return rate; |
| } |
| |
| static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong ret = 0; |
| |
| switch (clk->id) { |
| case 0 ... 63: |
| return 0; |
| |
| case ACLK_PERIHP: |
| case HCLK_PERIHP: |
| case PCLK_PERIHP: |
| return 0; |
| |
| case ACLK_PERILP0: |
| case HCLK_PERILP0: |
| case PCLK_PERILP0: |
| return 0; |
| |
| case ACLK_CCI: |
| return 0; |
| |
| case HCLK_PERILP1: |
| case PCLK_PERILP1: |
| return 0; |
| |
| case HCLK_SDIO: |
| case SCLK_SDIO: |
| case HCLK_SDMMC: |
| case SCLK_SDMMC: |
| case SCLK_EMMC: |
| ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate); |
| break; |
| case SCLK_MAC: |
| ret = rk3399_gmac_set_clk(priv->cru, rate); |
| break; |
| case SCLK_I2C1: |
| case SCLK_I2C2: |
| case SCLK_I2C3: |
| case SCLK_I2C5: |
| case SCLK_I2C6: |
| case SCLK_I2C7: |
| ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate); |
| break; |
| case SCLK_SPI0...SCLK_SPI5: |
| ret = rk3399_spi_set_clk(priv->cru, clk->id, rate); |
| break; |
| case PCLK_HDMI_CTRL: |
| case PCLK_VIO_GRF: |
| /* the PCLK gates for video are enabled by default */ |
| break; |
| case DCLK_VOP0: |
| case DCLK_VOP1: |
| ret = rk3399_vop_set_clk(priv->cru, clk->id, rate); |
| break; |
| case ACLK_VOP1: |
| case HCLK_VOP1: |
| case HCLK_SD: |
| case SCLK_UPHY0_TCPDCORE: |
| case SCLK_UPHY1_TCPDCORE: |
| /** |
| * assigned-clocks handling won't require for vopl, so |
| * return 0 to satisfy clk_set_defaults during device probe. |
| */ |
| return 0; |
| case SCLK_DDRCLK: |
| ret = rk3399_ddr_set_clk(priv->cru, rate); |
| break; |
| case PCLK_EFUSE1024NS: |
| break; |
| case SCLK_SARADC: |
| ret = rk3399_saradc_set_clk(priv->cru, rate); |
| break; |
| case ACLK_VIO: |
| case ACLK_HDCP: |
| case ACLK_GIC_PRE: |
| case PCLK_DDR: |
| return 0; |
| default: |
| log_debug("Unknown clock %lu\n", clk->id); |
| return -ENOENT; |
| } |
| |
| return ret; |
| } |
| |
| static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, |
| struct clk *parent) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| const char *clock_output_name; |
| int ret; |
| |
| /* |
| * If the requested parent is in the same clock-controller and |
| * the id is SCLK_MAC ("clk_gmac"), switch to the internal clock. |
| */ |
| if (parent->dev == clk->dev && parent->id == SCLK_MAC) { |
| debug("%s: switching RGMII to SCLK_MAC\n", __func__); |
| rk_clrreg(&priv->cru->clksel_con[19], BIT(4)); |
| return 0; |
| } |
| |
| /* |
| * Otherwise, we need to check the clock-output-names of the |
| * requested parent to see if the requested id is "clkin_gmac". |
| */ |
| ret = dev_read_string_index(parent->dev, "clock-output-names", |
| parent->id, &clock_output_name); |
| if (ret < 0) |
| return -ENODATA; |
| |
| /* If this is "clkin_gmac", switch to the external clock input */ |
| if (!strcmp(clock_output_name, "clkin_gmac")) { |
| debug("%s: switching RGMII to CLKIN\n", __func__); |
| rk_setreg(&priv->cru->clksel_con[19], BIT(4)); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int __maybe_unused rk3399_clk_set_parent(struct clk *clk, |
| struct clk *parent) |
| { |
| switch (clk->id) { |
| case SCLK_RMII_SRC: |
| return rk3399_gmac_set_parent(clk, parent); |
| } |
| |
| debug("%s: unsupported clk %ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| static int rk3399_clk_enable(struct clk *clk) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| switch (clk->id) { |
| case SCLK_MAC: |
| rk_clrreg(&priv->cru->clkgate_con[5], BIT(5)); |
| break; |
| case SCLK_MAC_RX: |
| rk_clrreg(&priv->cru->clkgate_con[5], BIT(8)); |
| break; |
| case SCLK_MAC_TX: |
| rk_clrreg(&priv->cru->clkgate_con[5], BIT(9)); |
| break; |
| case SCLK_MACREF: |
| rk_clrreg(&priv->cru->clkgate_con[5], BIT(7)); |
| break; |
| case SCLK_MACREF_OUT: |
| rk_clrreg(&priv->cru->clkgate_con[5], BIT(6)); |
| break; |
| case SCLK_USB2PHY0_REF: |
| rk_clrreg(&priv->cru->clkgate_con[6], BIT(5)); |
| break; |
| case SCLK_USB2PHY1_REF: |
| rk_clrreg(&priv->cru->clkgate_con[6], BIT(6)); |
| break; |
| case ACLK_GMAC: |
| rk_clrreg(&priv->cru->clkgate_con[32], BIT(0)); |
| break; |
| case PCLK_GMAC: |
| rk_clrreg(&priv->cru->clkgate_con[32], BIT(2)); |
| break; |
| case SCLK_USB3OTG0_REF: |
| rk_clrreg(&priv->cru->clkgate_con[12], BIT(1)); |
| break; |
| case SCLK_USB3OTG1_REF: |
| rk_clrreg(&priv->cru->clkgate_con[12], BIT(2)); |
| break; |
| case SCLK_USB3OTG0_SUSPEND: |
| rk_clrreg(&priv->cru->clkgate_con[12], BIT(3)); |
| break; |
| case SCLK_USB3OTG1_SUSPEND: |
| rk_clrreg(&priv->cru->clkgate_con[12], BIT(4)); |
| break; |
| case ACLK_USB3OTG0: |
| rk_clrreg(&priv->cru->clkgate_con[30], BIT(1)); |
| break; |
| case ACLK_USB3OTG1: |
| rk_clrreg(&priv->cru->clkgate_con[30], BIT(2)); |
| break; |
| case ACLK_USB3_RKSOC_AXI_PERF: |
| rk_clrreg(&priv->cru->clkgate_con[30], BIT(3)); |
| break; |
| case ACLK_USB3: |
| rk_clrreg(&priv->cru->clkgate_con[12], BIT(0)); |
| break; |
| case ACLK_USB3_GRF: |
| rk_clrreg(&priv->cru->clkgate_con[30], BIT(4)); |
| break; |
| case HCLK_HOST0: |
| rk_clrreg(&priv->cru->clksel_con[20], BIT(5)); |
| break; |
| case HCLK_HOST0_ARB: |
| rk_clrreg(&priv->cru->clksel_con[20], BIT(6)); |
| break; |
| case HCLK_HOST1: |
| rk_clrreg(&priv->cru->clksel_con[20], BIT(7)); |
| break; |
| case HCLK_HOST1_ARB: |
| rk_clrreg(&priv->cru->clksel_con[20], BIT(8)); |
| break; |
| case SCLK_UPHY0_TCPDPHY_REF: |
| rk_clrreg(&priv->cru->clkgate_con[13], BIT(4)); |
| break; |
| case SCLK_UPHY0_TCPDCORE: |
| rk_clrreg(&priv->cru->clkgate_con[13], BIT(5)); |
| break; |
| case SCLK_UPHY1_TCPDPHY_REF: |
| rk_clrreg(&priv->cru->clkgate_con[13], BIT(6)); |
| break; |
| case SCLK_UPHY1_TCPDCORE: |
| rk_clrreg(&priv->cru->clkgate_con[13], BIT(7)); |
| break; |
| case SCLK_PCIEPHY_REF: |
| rk_clrreg(&priv->cru->clksel_con[18], BIT(10)); |
| break; |
| default: |
| debug("%s: unsupported clk %ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| return 0; |
| } |
| |
| static int rk3399_clk_disable(struct clk *clk) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| switch (clk->id) { |
| case SCLK_MAC: |
| rk_setreg(&priv->cru->clkgate_con[5], BIT(5)); |
| break; |
| case SCLK_MAC_RX: |
| rk_setreg(&priv->cru->clkgate_con[5], BIT(8)); |
| break; |
| case SCLK_MAC_TX: |
| rk_setreg(&priv->cru->clkgate_con[5], BIT(9)); |
| break; |
| case SCLK_MACREF: |
| rk_setreg(&priv->cru->clkgate_con[5], BIT(7)); |
| break; |
| case SCLK_MACREF_OUT: |
| rk_setreg(&priv->cru->clkgate_con[5], BIT(6)); |
| break; |
| case SCLK_USB2PHY0_REF: |
| rk_setreg(&priv->cru->clkgate_con[6], BIT(5)); |
| break; |
| case SCLK_USB2PHY1_REF: |
| rk_setreg(&priv->cru->clkgate_con[6], BIT(6)); |
| break; |
| case ACLK_GMAC: |
| rk_setreg(&priv->cru->clkgate_con[32], BIT(0)); |
| break; |
| case PCLK_GMAC: |
| rk_setreg(&priv->cru->clkgate_con[32], BIT(2)); |
| break; |
| case SCLK_USB3OTG0_REF: |
| rk_setreg(&priv->cru->clkgate_con[12], BIT(1)); |
| break; |
| case SCLK_USB3OTG1_REF: |
| rk_setreg(&priv->cru->clkgate_con[12], BIT(2)); |
| break; |
| case SCLK_USB3OTG0_SUSPEND: |
| rk_setreg(&priv->cru->clkgate_con[12], BIT(3)); |
| break; |
| case SCLK_USB3OTG1_SUSPEND: |
| rk_setreg(&priv->cru->clkgate_con[12], BIT(4)); |
| break; |
| case ACLK_USB3OTG0: |
| rk_setreg(&priv->cru->clkgate_con[30], BIT(1)); |
| break; |
| case ACLK_USB3OTG1: |
| rk_setreg(&priv->cru->clkgate_con[30], BIT(2)); |
| break; |
| case ACLK_USB3_RKSOC_AXI_PERF: |
| rk_setreg(&priv->cru->clkgate_con[30], BIT(3)); |
| break; |
| case ACLK_USB3: |
| rk_setreg(&priv->cru->clkgate_con[12], BIT(0)); |
| break; |
| case ACLK_USB3_GRF: |
| rk_setreg(&priv->cru->clkgate_con[30], BIT(4)); |
| break; |
| case HCLK_HOST0: |
| rk_setreg(&priv->cru->clksel_con[20], BIT(5)); |
| break; |
| case HCLK_HOST0_ARB: |
| rk_setreg(&priv->cru->clksel_con[20], BIT(6)); |
| break; |
| case HCLK_HOST1: |
| rk_setreg(&priv->cru->clksel_con[20], BIT(7)); |
| break; |
| case HCLK_HOST1_ARB: |
| rk_setreg(&priv->cru->clksel_con[20], BIT(8)); |
| break; |
| case SCLK_UPHY0_TCPDPHY_REF: |
| rk_setreg(&priv->cru->clkgate_con[13], BIT(4)); |
| break; |
| case SCLK_UPHY0_TCPDCORE: |
| rk_setreg(&priv->cru->clkgate_con[13], BIT(5)); |
| break; |
| case SCLK_UPHY1_TCPDPHY_REF: |
| rk_setreg(&priv->cru->clkgate_con[13], BIT(6)); |
| break; |
| case SCLK_UPHY1_TCPDCORE: |
| rk_setreg(&priv->cru->clkgate_con[13], BIT(7)); |
| break; |
| case SCLK_PCIEPHY_REF: |
| rk_clrreg(&priv->cru->clksel_con[18], BIT(10)); |
| break; |
| default: |
| debug("%s: unsupported clk %ld\n", __func__, clk->id); |
| return -ENOENT; |
| } |
| |
| return 0; |
| } |
| |
| static struct clk_ops rk3399_clk_ops = { |
| .get_rate = rk3399_clk_get_rate, |
| .set_rate = rk3399_clk_set_rate, |
| #if CONFIG_IS_ENABLED(OF_REAL) |
| .set_parent = rk3399_clk_set_parent, |
| #endif |
| .enable = rk3399_clk_enable, |
| .disable = rk3399_clk_disable, |
| }; |
| |
| static void rkclk_init(struct rockchip_cru *cru) |
| { |
| u32 aclk_div; |
| u32 hclk_div; |
| u32 pclk_div; |
| |
| rk3399_configure_cpu_l(cru, APLL_L_600_MHZ); |
| rk3399_configure_cpu_b(cru, APLL_B_600_MHZ); |
| /* |
| * some cru registers changed by bootrom, we'd better reset them to |
| * reset/default values described in TRM to avoid confusion in kernel. |
| * Please consider these three lines as a fix of bootrom bug. |
| */ |
| rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101); |
| rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f); |
| rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003); |
| |
| /* configure gpll cpll */ |
| rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg); |
| rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg); |
| |
| /* configure perihp aclk, hclk, pclk */ |
| aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1; |
| assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); |
| |
| hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1; |
| assert((hclk_div + 1) * PERIHP_HCLK_HZ == |
| PERIHP_ACLK_HZ && (hclk_div < 0x4)); |
| |
| pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1; |
| assert((pclk_div + 1) * PERIHP_PCLK_HZ == |
| PERIHP_ACLK_HZ && (pclk_div < 0x7)); |
| |
| rk_clrsetreg(&cru->clksel_con[14], |
| PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK | |
| ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK, |
| pclk_div << PCLK_PERIHP_DIV_CON_SHIFT | |
| hclk_div << HCLK_PERIHP_DIV_CON_SHIFT | |
| ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT | |
| aclk_div << ACLK_PERIHP_DIV_CON_SHIFT); |
| |
| /* configure perilp0 aclk, hclk, pclk */ |
| aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1; |
| assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); |
| |
| hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1; |
| assert((hclk_div + 1) * PERILP0_HCLK_HZ == |
| PERILP0_ACLK_HZ && (hclk_div < 0x4)); |
| |
| pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1; |
| assert((pclk_div + 1) * PERILP0_PCLK_HZ == |
| PERILP0_ACLK_HZ && (pclk_div < 0x7)); |
| |
| rk_clrsetreg(&cru->clksel_con[23], |
| PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK | |
| ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK, |
| pclk_div << PCLK_PERILP0_DIV_CON_SHIFT | |
| hclk_div << HCLK_PERILP0_DIV_CON_SHIFT | |
| ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT | |
| aclk_div << ACLK_PERILP0_DIV_CON_SHIFT); |
| |
| /* perilp1 hclk select gpll as source */ |
| hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1; |
| assert((hclk_div + 1) * PERILP1_HCLK_HZ == |
| GPLL_HZ && (hclk_div < 0x1f)); |
| |
| pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1; |
| assert((pclk_div + 1) * PERILP1_HCLK_HZ == |
| PERILP1_HCLK_HZ && (hclk_div < 0x7)); |
| |
| rk_clrsetreg(&cru->clksel_con[25], |
| PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK | |
| HCLK_PERILP1_PLL_SEL_MASK, |
| pclk_div << PCLK_PERILP1_DIV_CON_SHIFT | |
| hclk_div << HCLK_PERILP1_DIV_CON_SHIFT | |
| HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT); |
| } |
| |
| static int rk3399_clk_probe(struct udevice *dev) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(dev); |
| bool init_clocks = false; |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct rk3399_clk_plat *plat = dev_get_plat(dev); |
| |
| priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); |
| #endif |
| |
| #if defined(CONFIG_SPL_BUILD) |
| init_clocks = true; |
| #elif CONFIG_IS_ENABLED(HANDOFF) |
| if (!(gd->flags & GD_FLG_RELOC)) { |
| if (!(gd->spl_handoff)) |
| init_clocks = true; |
| } |
| #endif |
| |
| if (init_clocks) |
| rkclk_init(priv->cru); |
| |
| return 0; |
| } |
| |
| static int rk3399_clk_of_to_plat(struct udevice *dev) |
| { |
| if (CONFIG_IS_ENABLED(OF_REAL)) { |
| struct rk3399_clk_priv *priv = dev_get_priv(dev); |
| |
| priv->cru = dev_read_addr_ptr(dev); |
| } |
| |
| return 0; |
| } |
| |
| static int rk3399_clk_bind(struct udevice *dev) |
| { |
| int ret; |
| struct udevice *sys_child; |
| struct sysreset_reg *priv; |
| |
| /* The reset driver does not have a device node, so bind it here */ |
| ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset", |
| &sys_child); |
| if (ret) { |
| debug("Warning: No sysreset driver: ret=%d\n", ret); |
| } else { |
| priv = malloc(sizeof(struct sysreset_reg)); |
| priv->glb_srst_fst_value = offsetof(struct rockchip_cru, |
| glb_srst_fst_value); |
| priv->glb_srst_snd_value = offsetof(struct rockchip_cru, |
| glb_srst_snd_value); |
| dev_set_priv(sys_child, priv); |
| } |
| |
| #if CONFIG_IS_ENABLED(RESET_ROCKCHIP) |
| ret = offsetof(struct rockchip_cru, softrst_con[0]); |
| ret = rockchip_reset_bind(dev, ret, 21); |
| if (ret) |
| debug("Warning: software reset driver bind failed\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct udevice_id rk3399_clk_ids[] = { |
| { .compatible = "rockchip,rk3399-cru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(clk_rk3399) = { |
| .name = "rockchip_rk3399_cru", |
| .id = UCLASS_CLK, |
| .of_match = rk3399_clk_ids, |
| .priv_auto = sizeof(struct rk3399_clk_priv), |
| .of_to_plat = rk3399_clk_of_to_plat, |
| .ops = &rk3399_clk_ops, |
| .bind = rk3399_clk_bind, |
| .probe = rk3399_clk_probe, |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| .plat_auto = sizeof(struct rk3399_clk_plat), |
| #endif |
| }; |
| |
| static ulong rk3399_i2c_get_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case SCLK_I2C0_PMU: |
| con = readl(&pmucru->pmucru_clksel[2]); |
| div = I2C_CLK_DIV_VALUE(con, 0); |
| break; |
| case SCLK_I2C4_PMU: |
| con = readl(&pmucru->pmucru_clksel[3]); |
| div = I2C_CLK_DIV_VALUE(con, 4); |
| break; |
| case SCLK_I2C8_PMU: |
| con = readl(&pmucru->pmucru_clksel[2]); |
| div = I2C_CLK_DIV_VALUE(con, 8); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(PPLL_HZ, div); |
| } |
| |
| static ulong rk3399_i2c_set_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id, |
| uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = PPLL_HZ / hz; |
| assert(src_clk_div - 1 < 127); |
| |
| switch (clk_id) { |
| case SCLK_I2C0_PMU: |
| rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(0), |
| I2C_PMUCLK_REG_VALUE(0, src_clk_div)); |
| break; |
| case SCLK_I2C4_PMU: |
| rk_clrsetreg(&pmucru->pmucru_clksel[3], I2C_PMUCLK_REG_MASK(4), |
| I2C_PMUCLK_REG_VALUE(4, src_clk_div)); |
| break; |
| case SCLK_I2C8_PMU: |
| rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(8), |
| I2C_PMUCLK_REG_VALUE(8, src_clk_div)); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(PPLL_HZ, src_clk_div); |
| } |
| |
| static ulong rk3399_pwm_get_clk(struct rk3399_pmucru *pmucru) |
| { |
| u32 div, con; |
| |
| /* PWM closk rate is same as pclk_pmu */ |
| con = readl(&pmucru->pmucru_clksel[0]); |
| div = con & PMU_PCLK_DIV_CON_MASK; |
| |
| return DIV_TO_RATE(PPLL_HZ, div); |
| } |
| |
| static ulong rk3399_pmuclk_get_rate(struct clk *clk) |
| { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate = 0; |
| |
| switch (clk->id) { |
| case PLL_PPLL: |
| return PPLL_HZ; |
| case PCLK_RKPWM_PMU: |
| case PCLK_WDT_M0_PMU: |
| rate = rk3399_pwm_get_clk(priv->pmucru); |
| break; |
| case SCLK_I2C0_PMU: |
| case SCLK_I2C4_PMU: |
| case SCLK_I2C8_PMU: |
| rate = rk3399_i2c_get_pmuclk(priv->pmucru, clk->id); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rate; |
| } |
| |
| static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| ulong ret = 0; |
| |
| switch (clk->id) { |
| case PLL_PPLL: |
| /* |
| * This has already been set up and we don't want/need |
| * to change it here. Accept the request though, as the |
| * device-tree has this in an 'assigned-clocks' list. |
| */ |
| return PPLL_HZ; |
| case SCLK_I2C0_PMU: |
| case SCLK_I2C4_PMU: |
| case SCLK_I2C8_PMU: |
| ret = rk3399_i2c_set_pmuclk(priv->pmucru, clk->id, rate); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return ret; |
| } |
| |
| static struct clk_ops rk3399_pmuclk_ops = { |
| .get_rate = rk3399_pmuclk_get_rate, |
| .set_rate = rk3399_pmuclk_set_rate, |
| }; |
| |
| #ifndef CONFIG_SPL_BUILD |
| static void pmuclk_init(struct rk3399_pmucru *pmucru) |
| { |
| u32 pclk_div; |
| |
| /* configure pmu pll(ppll) */ |
| rkclk_set_pll(&pmucru->ppll_con[0], &ppll_init_cfg); |
| |
| /* configure pmu pclk */ |
| pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1; |
| rk_clrsetreg(&pmucru->pmucru_clksel[0], |
| PMU_PCLK_DIV_CON_MASK, |
| pclk_div << PMU_PCLK_DIV_CON_SHIFT); |
| } |
| #endif |
| |
| static int rk3399_pmuclk_probe(struct udevice *dev) |
| { |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD) |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); |
| #endif |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct rk3399_pmuclk_plat *plat = dev_get_plat(dev); |
| |
| priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); |
| #endif |
| |
| #ifndef CONFIG_SPL_BUILD |
| pmuclk_init(priv->pmucru); |
| #endif |
| return 0; |
| } |
| |
| static int rk3399_pmuclk_of_to_plat(struct udevice *dev) |
| { |
| if (CONFIG_IS_ENABLED(OF_REAL)) { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); |
| |
| priv->pmucru = dev_read_addr_ptr(dev); |
| } |
| |
| return 0; |
| } |
| |
| static int rk3399_pmuclk_bind(struct udevice *dev) |
| { |
| #if CONFIG_IS_ENABLED(RESET_ROCKCHIP) |
| int ret; |
| |
| ret = offsetof(struct rk3399_pmucru, pmucru_softrst_con[0]); |
| ret = rockchip_reset_bind(dev, ret, 2); |
| if (ret) |
| debug("Warning: software reset driver bind failed\n"); |
| #endif |
| return 0; |
| } |
| |
| static const struct udevice_id rk3399_pmuclk_ids[] = { |
| { .compatible = "rockchip,rk3399-pmucru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rockchip_rk3399_pmuclk) = { |
| .name = "rockchip_rk3399_pmucru", |
| .id = UCLASS_CLK, |
| .of_match = rk3399_pmuclk_ids, |
| .priv_auto = sizeof(struct rk3399_pmuclk_priv), |
| .of_to_plat = rk3399_pmuclk_of_to_plat, |
| .ops = &rk3399_pmuclk_ops, |
| .probe = rk3399_pmuclk_probe, |
| .bind = rk3399_pmuclk_bind, |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| .plat_auto = sizeof(struct rk3399_pmuclk_plat), |
| #endif |
| }; |