WS cleanup: remove SPACE(s) followed by TAB
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 3dabc3f..32d1401 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -34,7 +34,7 @@
#define APM_16_BIT_SUPPORT 0x0001
#define APM_32_BIT_SUPPORT 0x0002
#define APM_IDLE_SLOWS_CLOCK 0x0004
-#define APM_BIOS_DISABLED 0x0008
+#define APM_BIOS_DISABLED 0x0008
#define APM_BIOS_DISENGAGED 0x0010
/*
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 98dd3fc..09cea0e 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -203,7 +203,7 @@
/*
* We can't declare function 'inline' because __no_sanitize_address confilcts
* with inlining. Attempt to inline it may cause a build failure.
- * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
* '__maybe_unused' allows us to avoid defined-but-not-used warnings.
*/
# define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 7129504..85288c3 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -63,7 +63,7 @@
#define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
#define IORESOURCE_IRQ_LOWLEVEL (1<<3)
#define IORESOURCE_IRQ_SHAREABLE (1<<4)
-#define IORESOURCE_IRQ_OPTIONAL (1<<5)
+#define IORESOURCE_IRQ_OPTIONAL (1<<5)
/* PnP DMA specific bits (IORESOURCE_BITS) */
#define IORESOURCE_DMA_TYPE_MASK (3<<0)
diff --git a/include/linux/list.h b/include/linux/list.h
index f62afa0..3eacf68 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -456,7 +456,7 @@
* Continue to iterate over list of given type, continuing after
* the current position.
*/
-#define list_for_each_entry_continue(pos, head, member) \
+#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member); \
prefetch(pos->member.next), &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member))
@@ -510,7 +510,7 @@
* Iterate over list of given type, continuing after current point,
* safe against removal of list entry.
*/
-#define list_for_each_entry_safe_continue(pos, n, head, member) \
+#define list_for_each_entry_safe_continue(pos, n, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member), \
n = list_entry(pos->member.next, typeof(*pos), member); \
&pos->member != (head); \
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index d57f8da..a72cb7d 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -54,7 +54,7 @@
#define DoC_Mplus_Configuration 0x100a
#define DoC_Mplus_OutputControl 0x100c
#define DoC_Mplus_FlashControl 0x1020
-#define DoC_Mplus_FlashSelect 0x1022
+#define DoC_Mplus_FlashSelect 0x1022
#define DoC_Mplus_FlashCmd 0x1024
#define DoC_Mplus_FlashAddress 0x1026
#define DoC_Mplus_FlashData0 0x1028
@@ -62,14 +62,14 @@
#define DoC_Mplus_ReadPipeInit 0x102a
#define DoC_Mplus_LastDataRead 0x102c
#define DoC_Mplus_LastDataRead1 0x102d
-#define DoC_Mplus_WritePipeTerm 0x102e
+#define DoC_Mplus_WritePipeTerm 0x102e
#define DoC_Mplus_ECCSyndrome0 0x1040
#define DoC_Mplus_ECCSyndrome1 0x1041
#define DoC_Mplus_ECCSyndrome2 0x1042
#define DoC_Mplus_ECCSyndrome3 0x1043
#define DoC_Mplus_ECCSyndrome4 0x1044
#define DoC_Mplus_ECCSyndrome5 0x1045
-#define DoC_Mplus_ECCConf 0x1046
+#define DoC_Mplus_ECCConf 0x1046
#define DoC_Mplus_Toggle 0x1046
#define DoC_Mplus_DownloadStatus 0x1074
#define DoC_Mplus_CtrlConfirm 0x1076
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 3822237..0f5a233 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -21,16 +21,16 @@
* For each partition, these fields are available:
* name: string that will be used to label the partition's MTD device.
* size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
- * will extend to the end of the master MTD device.
+ * will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
- * defined as MTDPART_OFS_APPEND, the partition will start where the
+ * defined as MTDPART_OFS_APPEND, the partition will start where the
* previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
* if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
* after the end of partition.
* mask_flags: contains flags that have to be masked (removed) from the
- * master MTD flag set for the corresponding MTD partition.
- * For example, to force a read-only partition, simply adding
- * MTD_WRITEABLE to the mask_flags will do the trick.
+ * master MTD flag set for the corresponding MTD partition.
+ * For example, to force a read-only partition, simply adding
+ * MTD_WRITEABLE to the mask_flags will do the trick.
*
* Note: writeable partitions require their size and offset be
* erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index 899fbb4..46e7fff 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -47,7 +47,7 @@
} __attribute__((packed));
#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
-#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
+#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
@@ -74,7 +74,7 @@
#define ORIG_X (screen_info.orig_x)
#define ORIG_Y (screen_info.orig_y)
#define ORIG_VIDEO_MODE (screen_info.orig_video_mode)
-#define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
+#define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
#define ORIG_VIDEO_EGA_BX (screen_info.orig_video_ega_bx)
#define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
#define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 20ea543..0613717 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -257,7 +257,7 @@
*/
#define UART_ASR 0x01 /* Additional Status Register */
#define UART_RFL 0x03 /* Receiver FIFO level */
-#define UART_TFL 0x04 /* Transmitter FIFO level */
+#define UART_TFL 0x04 /* Transmitter FIFO level */
#define UART_ICR 0x05 /* Index Control Register */
/* The 16950 ICR registers */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 7e6d329..b3f4b8d 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -160,14 +160,14 @@
* endpoint. It's set once by UDC driver when endpoint is initialized, and
* should not be changed. Should not be confused with maxpacket.
* @max_streams: The maximum number of streams supported
- * by this EP (0 - 16, actual number is 2^n)
+ * by this EP (0 - 16, actual number is 2^n)
* @maxburst: the maximum number of bursts supported by this EP (for usb3)
* @driver_data:for use by the gadget driver. all other fields are
* read-only to gadget drivers.
* @desc: endpoint descriptor. This pointer is set before the endpoint is
- * enabled and remains valid until the endpoint is disabled.
+ * enabled and remains valid until the endpoint is disabled.
* @comp_desc: In case of SuperSpeed support, this is the endpoint companion
- * descriptor that is used to configure the endpoint
+ * descriptor that is used to configure the endpoint
*
* the bus controller driver lists all the general purpose endpoints in
* gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,