WS cleanup: remove SPACE(s) followed by TAB
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 44533fd..1502cb8 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -691,8 +691,8 @@
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_utmi_l1_suspend: the core asserts output signal
- * 0 - utmi_sleep_n
- * 1 - utmi_l1_suspend_n
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
* @is_selfpowered: true when we are selfpowered
* @is_fpga: true when we are using the FPGA board
* @needs_fifo_resize: not all users might want fifo resizing, flag it
@@ -713,10 +713,10 @@
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
- * 0 - -6dB de-emphasis
- * 1 - -3.5dB de-emphasis
- * 2 - No de-emphasis
- * 3 - Reserved
+ * 0 - -6dB de-emphasis
+ * 1 - -3.5dB de-emphasis
+ * 2 - No de-emphasis
+ * 3 - Reserved
* @index: index of _this_ controller
* @list: to maintain the list of dwc3 controllers
*/
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4e68fb0..eb416b8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2209,7 +2209,7 @@
* BESL value in the LPM token is less than or equal to LPM
* NYET threshold.
*/
- if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum)
+ if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum)
WARN(true, "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 96a521e..e18de0e 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -35,7 +35,7 @@
#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
-#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
+#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index ba362b8..583ceb4 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -472,7 +472,7 @@
* so using '|=' isn't safe as it may ack an interrupt.
*/
#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
-#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE)
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE)
static inline void udc_set_mask_UDCCR(int mask)
{
diff --git a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
index f0f48a3..8db88f0 100644
--- a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
+++ b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
@@ -40,7 +40,7 @@
*
* To generate the content of the array below, use ie. the following command:
* $ hexdump -v -e '/4 "0x%08x, "' r8a779x_usb3_v3.dlmem | \
- * sed "s@\(.\{47\}\) @\1\n@g"
+ * sed "s@\(.\{47\}\) @\1\n@g"
*
* [1] git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
*/
diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c
index 5b149da..1fef00b 100644
--- a/drivers/usb/musb-new/musb_gadget.c
+++ b/drivers/usb/musb-new/musb_gadget.c
@@ -995,8 +995,8 @@
&& (musb_ep->dma->actual_len
== musb_ep->packet_sz)) {
/* In double buffer case, continue to unload fifo if
- * there is Rx packet in FIFO.
- **/
+ * there is Rx packet in FIFO.
+ **/
csr = musb_readw(epio, MUSB_RXCSR);
if ((csr & MUSB_RXCSR_RXPKTRDY) &&
hw_ep->rx_double_buffered)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index e5d8ac7..47b839c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -207,14 +207,14 @@
/* TxType/RxType */
#define MUSB_TYPE_SPEED 0xc0
#define MUSB_TYPE_SPEED_SHIFT 6
-#define MUSB_TYPE_SPEED_HIGH 1
-#define MUSB_TYPE_SPEED_FULL 2
+#define MUSB_TYPE_SPEED_HIGH 1
+#define MUSB_TYPE_SPEED_FULL 2
#define MUSB_TYPE_SPEED_LOW 3
#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
#define MUSB_TYPE_PROTO_SHIFT 4
#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
-#define MUSB_TYPE_PROTO_BULK 2
-#define MUSB_TYPE_PROTO_INTR 3
+#define MUSB_TYPE_PROTO_BULK 2
+#define MUSB_TYPE_PROTO_INTR 3
/* CONFIGDATA */
#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
@@ -304,7 +304,7 @@
* values are not supported
*/
struct musb_epinfo {
- u8 epnum; /* endpoint number */
+ u8 epnum; /* endpoint number */
u8 epdir; /* endpoint direction */
u16 epsize; /* endpoint FIFO size */
};
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index ffed3b8..1790170 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -14,7 +14,7 @@
#include "musb_hcd.h"
/* MSC control transfers */
-#define USB_MSC_BBB_RESET 0xFF
+#define USB_MSC_BBB_RESET 0xFF
#define USB_MSC_BBB_GET_MAX_LUN 0xFE
/* Endpoint configuration information */