Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
* 'agust@denx.de' of git://git.denx.de/u-boot-staging:
lin_gadget: use common linux/compat.h
linux/compat.h: rename from linux/mtd/compat.h
lin_gadget: use common mdelay
gunzip: rename z{alloc, free} to gz{alloc, free}
fs/fat: align disk buffers on cache line to enable DMA and cache
part_dos: align disk buffers on cache line to enable DMA and cache
diff --git a/MAINTAINERS b/MAINTAINERS
index 708ded7..e2441d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1191,6 +1191,7 @@
ADP-AG101 N1213 (AG101 SoC)
ADP-AG101P N1213 (AG101P XC5 FPGA)
+ ADP-AG102 N1213f (AG102 SoC with FPU)
#########################################################################
# OpenRISC Systems: #
diff --git a/MAKEALL b/MAKEALL
index e5da6f1..e6c801c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -34,6 +34,7 @@
CROSS_COMPILE cross-compiler toolchain prefix (default: "")
MAKEALL_LOGDIR output all logs to here (default: ./LOG/)
BUILD_DIR output build directory (default: ./)
+ BUILD_NBUILDS number of parallel targets (default: 1)
Examples:
- build all Power Architecture boards:
@@ -178,11 +179,22 @@
LOG_DIR="LOG"
fi
-if [ ! "${BUILD_DIR}" ] ; then
- BUILD_DIR="."
+: ${BUILD_NBUILDS:=1}
+BUILD_MANY=0
+
+if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
+ BUILD_MANY=1
+ : ${BUILD_DIR:=./build}
+ mkdir -p "${BUILD_DIR}/ERR"
+ find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
fi
+: ${BUILD_DIR:=.}
+
-[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1
+OUTPUT_PREFIX="${BUILD_DIR}"
+
+[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
+find "${LOG_DIR}/" -type f -exec rm -f {} +
LIST=""
@@ -190,6 +202,8 @@
ERR_CNT=0
ERR_LIST=""
TOTAL_CNT=0
+CURRENT_CNT=0
+OLDEST_IDX=1
RC=0
# Helper funcs for parsing boards.cfg
@@ -592,8 +606,26 @@
echo ""
}
+# Each finished build will have a file called ${donep}${n},
+# where n is the index of the build. Each build
+# we've already noted as finished will have ${skipp}${n}.
+# The code managing the build process will use this information
+# to ensure that only BUILD_NBUILDS builds are in flight at once
+donep="${LOG_DIR}/._done_"
+skipp="${LOG_DIR}/._skip_"
+
build_target() {
target=$1
+ build_idx=$2
+
+ if [ $BUILD_MANY == 1 ] ; then
+ output_dir="${OUTPUT_PREFIX}/${target}"
+ mkdir -p "${output_dir}"
+ else
+ output_dir="${OUTPUT_PREFIX}"
+ fi
+
+ export BUILD_DIR="${output_dir}"
if [ "$ONLY_LIST" == 'y' ] ; then
list_target ${target}
@@ -603,30 +635,75 @@
${MAKE} distclean >/dev/null
${MAKE} -s ${target}_config
- ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \
- | tee ${LOG_DIR}/$target.ERR
+ ${MAKE} ${JOBS} all \
+ >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
# Check for 'make' errors
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
RC=1
fi
- if [ -s ${LOG_DIR}/$target.ERR ] ; then
- ERR_CNT=$((ERR_CNT + 1))
- ERR_LIST="${ERR_LIST} $target"
+ if [ $BUILD_MANY == 1 ] ; then
+ ${MAKE} tidy
+
+ if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+ touch ${OUTPUT_PREFIX}/ERR/${target}
+ else
+ rm ${LOG_DIR}/${target}.ERR
+ fi
else
- rm ${LOG_DIR}/$target.ERR
+ if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+ : $(( ERR_CNT += 1 ))
+ ERR_LIST="${ERR_LIST} $target"
+ else
+ rm ${LOG_DIR}/${target}.ERR
+ fi
fi
- TOTAL_CNT=$((TOTAL_CNT + 1))
-
- OBJS=${BUILD_DIR}/u-boot
- if [ -e ${BUILD_DIR}/spl/u-boot-spl ]; then
- OBJS="${OBJS} ${BUILD_DIR}/spl/u-boot-spl"
+ OBJS=${output_dir}/u-boot
+ if [ -e ${output_dir}/spl/u-boot-spl ]; then
+ OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
fi
${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
+
+ [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
+
+ #echo "Writing ${donep}${build_idx}"
+ touch "${donep}${build_idx}"
+}
+
+manage_builds() {
+ search_idx=${OLDEST_IDX}
+ #echo "Searching ${OLDEST_IDX} to ${TOTAL_CNT}"
+ while true; do
+ if [ -e "${donep}${search_idx}" ] ; then
+ # echo "Found ${donep}${search_idx}"
+ : $(( CURRENT_CNT-- ))
+ [ ${OLDEST_IDX} -eq ${search_idx} ] &&
+ : $(( OLDEST_IDX++ ))
+
+ # Only want to count it once
+ rm -f "${donep}${search_idx}"
+ touch "${skipp}${search_idx}"
+ elif [ -e "${skipp}${search_idx}" ] ; then
+ [ ${OLDEST_IDX} -eq ${search_idx} ] &&
+ : $(( OLDEST_IDX++ ))
+ fi
+ #echo "Checking search ${search_idx} vs ${TOTAL_CNT}"
+ : $(( search_idx++ ))
+ if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
+ #echo "Checking current ${CURRENT_CNT} vs ${BUILD_NBUILDS}"
+ if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+ search_idx=${OLDEST_IDX}
+ sleep 1
+ else
+ break
+ fi
+ fi
+ done
}
+
build_targets() {
for t in "$@" ; do
# If a LIST_xxx var exists, use it. But avoid variable
@@ -639,7 +716,26 @@
if [ -n "${list}" ] ; then
build_targets ${list}
else
- build_target ${t}
+ : $((TOTAL_CNT += 1))
+ : $((CURRENT_CNT += 1))
+ rm -f "${donep}${TOTAL_CNT}"
+ rm -f "${skipp}${TOTAL_CNT}"
+ build_target ${t} ${TOTAL_CNT} &
+ fi
+
+ # We maintain a running count of all the builds we have done.
+ # Each finished build will have a file called ${donep}${n},
+ # where n is the index of the build. Each build
+ # we've already noted as finished will have ${skipp}${n}.
+ # We track the current index via TOTAL_CNT, and the oldest
+ # index. When we exceed the maximum number of parallel builds,
+ # We look from oldest to current for builds that have completed,
+ # and update the current count and oldest index as appropriate.
+ # If we've gone through the entire list, wait a second, and
+ # reprocess the entire list until we find a build that has
+ # completed
+ if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+ manage_builds
fi
done
}
@@ -648,6 +744,16 @@
print_stats() {
if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+ rm -f ${donep}* ${skipp}*
+
+ if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
+ ERR_LIST=$(ls ${OUTPUT_PREFIX}/ERR/)
+ ERR_CNT=`ls -1 ${OUTPUT_PREFIX}/ERR/ | wc | awk '{print $1}'`
+ else
+ ERR_CNT=0
+ fi
+
echo ""
echo "--------------------- SUMMARY ----------------------------"
echo "Boards compiled: ${TOTAL_CNT}"
@@ -666,3 +772,4 @@
# run PowerPC by default
[ $# = 0 ] && set -- powerpc
build_targets "$@"
+wait
diff --git a/README b/README
index f726303..79016e6 100644
--- a/README
+++ b/README
@@ -3026,6 +3026,24 @@
environment area within the total memory of your DataFlash placed
at the specified address.
+- CONFIG_ENV_IS_IN_REMOTE:
+
+ Define this if you have a remote memory space which you
+ want to use for the local device's environment.
+
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines specify the address and size of the
+ environment area within the remote memory space. The
+ local device can get the environment from remote memory
+ space by SRIO or other links.
+
+BE CAREFUL! For some special cases, the local device can not use
+"saveenv" command. For example, the local device will get the
+environment stored in a remote NOR flash by SRIO link, but it can
+not erase, write this NOR flash by SRIO interface.
+
- CONFIG_ENV_IS_IN_NAND:
Define this if you have a NAND device which you want to use
@@ -3462,6 +3480,12 @@
Specifies that QE/FMAN firmware is located on the primary SPI
device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device.
+- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+ Specifies that QE/FMAN firmware is located in the remote (master)
+ memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which
+ can be mapped from slave TLB->slave LAW->slave SRIO outbound window
+ ->master inbound window->master LAW->the ucode address in master's
+ NOR flash.
Building the Software:
======================
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index 1a8de49..25cd833 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -109,14 +109,8 @@
#ifndef CONFIG_SYS_MALLOC_BASE
# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#endif
-#ifndef CONFIG_SYS_GBL_DATA_ADDR
-# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
-#endif
-#ifndef CONFIG_SYS_BD_INFO_ADDR
-# define CONFIG_SYS_BD_INFO_ADDR (CONFIG_SYS_GBL_DATA_ADDR - GENERATED_BD_INFO_SIZE)
-#endif
#ifndef CONFIG_STACKBASE
-# define CONFIG_STACKBASE (CONFIG_SYS_BD_INFO_ADDR - 4)
+# define CONFIG_STACKBASE (CONFIG_SYS_MALLOC_BASE - 4)
#endif
#ifndef CONFIG_SYS_MEMTEST_START
# define CONFIG_SYS_MEMTEST_START 0
diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h
index 67aa30f..973ea29 100644
--- a/arch/blackfin/include/asm/global_data.h
+++ b/arch/blackfin/include/asm/global_data.h
@@ -73,6 +73,6 @@
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
-#define DECLARE_GLOBAL_DATA_PTR register gd_t * volatile gd asm ("P3")
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P3")
#endif
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index e3ee4cd..2d424a2 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -181,6 +181,46 @@
}
}
+static int global_board_data_init(void)
+{
+#ifndef CONFIG_SYS_GBL_DATA_ADDR
+# define CONFIG_SYS_GBL_DATA_ADDR 0
+#endif
+#ifndef CONFIG_SYS_BD_INFO_ADDR
+# define CONFIG_SYS_BD_INFO_ADDR 0
+#endif
+
+ bd_t *bd;
+
+ if (CONFIG_SYS_GBL_DATA_ADDR) {
+ gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR);
+ memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
+ } else {
+ static gd_t _bfin_gd;
+ gd = &_bfin_gd;
+ }
+
+ if (CONFIG_SYS_BD_INFO_ADDR) {
+ bd = (bd_t *) (CONFIG_SYS_BD_INFO_ADDR);
+ memset(bd, 0, GENERATED_BD_INFO_SIZE);
+ } else {
+ static bd_t _bfin_bd;
+ bd = &_bfin_bd;
+ }
+ gd->bd = bd;
+
+ bd->bi_r_version = version_string;
+ bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU);
+ bd->bi_board_name = BFIN_BOARD_NAME;
+ bd->bi_vco = get_vco();
+ bd->bi_cclk = get_cclk();
+ bd->bi_sclk = get_sclk();
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+
+ return 0;
+}
+
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
@@ -201,7 +241,6 @@
void board_init_f(ulong bootflag)
{
- bd_t *bd;
char buf[32];
#ifdef CONFIG_BOARD_EARLY_INIT_F
@@ -234,21 +273,8 @@
hang();
#endif
serial_early_puts("Init global data\n");
- gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR);
- memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
-
- bd = (bd_t *) (CONFIG_SYS_BD_INFO_ADDR);
- gd->bd = bd;
- memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
- bd->bi_r_version = version_string;
- bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU);
- bd->bi_board_name = BFIN_BOARD_NAME;
- bd->bi_vco = get_vco();
- bd->bi_cclk = get_cclk();
- bd->bi_sclk = get_sclk();
- bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
- bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+ global_board_data_init();
/* Initialize */
serial_early_puts("IRQ init\n");
@@ -276,7 +302,7 @@
if (CONFIG_MEM_SIZE) {
printf("RAM: ");
- print_size(bd->bi_memsize, "\n");
+ print_size(gd->bd->bi_memsize, "\n");
}
#if defined(CONFIG_POST)
diff --git a/arch/nds32/cpu/n1213/ag102/Makefile b/arch/nds32/cpu/n1213/ag102/Makefile
new file mode 100644
index 0000000..8716c4e
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag102/Makefile
@@ -0,0 +1,58 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# Copyright (C) 2011 Andes Technology Corporation
+# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS-y := cpu.o timer.o
+
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
+SOBJS := lowlevel_init.o
+endif
+
+ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+SOBJS += watchdog.o
+endif
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/nds32/cpu/n1213/ag102/asm-offsets.c b/arch/nds32/cpu/n1213/ag102/asm-offsets.c
new file mode 100644
index 0000000..4769a95
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag102/asm-offsets.c
@@ -0,0 +1,54 @@
+/*
+ * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
+ *
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <common.h>
+
+#include <linux/kbuild.h>
+
+int main(void)
+{
+#ifdef CONFIG_FTSMC020
+ OFFSET(FTSMC020_BANK0_CR, ftsmc020, bank[0].cr);
+ OFFSET(FTSMC020_BANK0_TPR, ftsmc020, bank[0].tpr);
+#endif
+ BLANK();
+#ifdef CONFIG_FTAHBC020S
+ OFFSET(FTAHBC020S_SLAVE_BSR_6, ftahbc02s, s_bsr[6]);
+ OFFSET(FTAHBC020S_CR, ftahbc02s, cr);
+#endif
+ BLANK();
+#ifdef CONFIG_ANDES_PCU
+ OFFSET(ANDES_PCU_PCS4, andes_pcu, pcs4.parm); /* 0x104 */
+#endif
+ BLANK();
+#ifdef CONFIG_DWCDDR21MCTL
+ OFFSET(DWCDDR21MCTL_CCR, dwcddr21mctl, ccr); /* 0x04 */
+ OFFSET(DWCDDR21MCTL_DCR, dwcddr21mctl, dcr); /* 0x04 */
+ OFFSET(DWCDDR21MCTL_IOCR, dwcddr21mctl, iocr); /* 0x08 */
+ OFFSET(DWCDDR21MCTL_CSR, dwcddr21mctl, csr); /* 0x0c */
+ OFFSET(DWCDDR21MCTL_DRR, dwcddr21mctl, drr); /* 0x10 */
+ OFFSET(DWCDDR21MCTL_DLLCR0, dwcddr21mctl, dllcr[0]); /* 0x24 */
+ OFFSET(DWCDDR21MCTL_DLLCR1, dwcddr21mctl, dllcr[1]); /* 0x28 */
+ OFFSET(DWCDDR21MCTL_DLLCR2, dwcddr21mctl, dllcr[2]); /* 0x2c */
+ OFFSET(DWCDDR21MCTL_DLLCR3, dwcddr21mctl, dllcr[3]); /* 0x30 */
+ OFFSET(DWCDDR21MCTL_DLLCR4, dwcddr21mctl, dllcr[4]); /* 0x34 */
+ OFFSET(DWCDDR21MCTL_DLLCR5, dwcddr21mctl, dllcr[5]); /* 0x38 */
+ OFFSET(DWCDDR21MCTL_DLLCR6, dwcddr21mctl, dllcr[6]); /* 0x3c */
+ OFFSET(DWCDDR21MCTL_DLLCR7, dwcddr21mctl, dllcr[7]); /* 0x40 */
+ OFFSET(DWCDDR21MCTL_DLLCR8, dwcddr21mctl, dllcr[8]); /* 0x44 */
+ OFFSET(DWCDDR21MCTL_DLLCR9, dwcddr21mctl, dllcr[9]); /* 0x48 */
+ OFFSET(DWCDDR21MCTL_RSLR0, dwcddr21mctl, rslr[0]); /* 0x4c */
+ OFFSET(DWCDDR21MCTL_RDGR0, dwcddr21mctl, rdgr[0]); /* 0x5c */
+ OFFSET(DWCDDR21MCTL_DTAR, dwcddr21mctl, dtar); /* 0xa4 */
+ OFFSET(DWCDDR21MCTL_MR, dwcddr21mctl, mr); /* 0x1f0 */
+#endif
+ return 0;
+}
diff --git a/arch/nds32/cpu/n1213/ag102/cpu.c b/arch/nds32/cpu/n1213/ag102/cpu.c
new file mode 100644
index 0000000..ed88b52
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag102/cpu.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* CPU specific code */
+#include <common.h>
+#include <command.h>
+#include <watchdog.h>
+#include <asm/cache.h>
+
+#include <faraday/ftwdt010_wdt.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+ disable_interrupts();
+
+#ifdef CONFIG_MMU
+ /* turn off I/D-cache */
+ icache_disable();
+ dcache_disable();
+
+ /* flush I/D-cache */
+ invalidate_icac();
+ invalidate_dcac();
+#endif
+
+ return 0;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ disable_interrupts();
+
+ /*
+ * reset to the base addr of andesboot.
+ * currently no ROM loader at addr 0.
+ * do not use reset_cpu(0);
+ */
+#ifdef CONFIG_FTWDT010_WATCHDOG
+ /*
+ * workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead
+ * automatic hardware reset when booting Linux.
+ * Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here.
+ */
+ ftwdt010_wdt_reset();
+#endif /* CONFIG_FTWDT010_WATCHDOG */
+ hang();
+
+ /*NOTREACHED*/
+}
+
+static inline unsigned long CACHE_LINE_SIZE(enum cache_t cache)
+{
+ if (cache == ICACHE)
+ return 8 << (((GET_ICM_CFG() & ICM_CFG_MSK_ISZ) \
+ >> ICM_CFG_OFF_ISZ) - 1);
+ else
+ return 8 << (((GET_DCM_CFG() & DCM_CFG_MSK_DSZ) \
+ >> DCM_CFG_OFF_DSZ) - 1);
+}
+
+void dcache_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long line_size;
+
+ line_size = CACHE_LINE_SIZE(DCACHE);
+
+ while (end > start) {
+ __asm__ volatile ("\n\tcctl %0, L1D_VA_WB" : : "r"(start));
+ __asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL" : : "r"(start));
+ start += line_size;
+ }
+}
+
+void icache_inval_range(unsigned long start, unsigned long end)
+{
+ unsigned long line_size;
+
+ line_size = CACHE_LINE_SIZE(ICACHE);
+ while (end > start) {
+ __asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL" : : "r"(start));
+ start += line_size;
+ }
+}
+
+void flush_cache(unsigned long addr, unsigned long size)
+{
+ dcache_flush_range(addr, addr + size);
+ icache_inval_range(addr, addr + size);
+}
+
+void icache_enable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "ori $p0, $p0, 0x01\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+void icache_disable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "li $p1, ~0x01\n\t"
+ "and $p0, $p0, $p1\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+int icache_status(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "andi %0, $p0, 0x01\n\t"
+ : "=r" (ret)
+ :
+ : "memory"
+ );
+
+ return ret;
+}
+
+void dcache_enable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "ori $p0, $p0, 0x02\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+void dcache_disable(void)
+{
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "li $p1, ~0x02\n\t"
+ "and $p0, $p0, $p1\n\t"
+ "mtsr $p0, $mr8\n\t"
+ "isb\n\t"
+ );
+}
+
+int dcache_status(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ "mfsr $p0, $mr8\n\t"
+ "andi %0, $p0, 0x02\n\t"
+ : "=r" (ret)
+ :
+ : "memory"
+ );
+
+ return ret;
+}
diff --git a/arch/nds32/cpu/n1213/ag102/lowlevel_init.S b/arch/nds32/cpu/n1213/ag102/lowlevel_init.S
new file mode 100644
index 0000000..d842afa
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag102/lowlevel_init.S
@@ -0,0 +1,297 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+.text
+
+#include <common.h>
+#include <config.h>
+
+#include <asm/macro.h>
+#include <generated/asm-offsets.h>
+
+/*
+ * parameters for Synopsys DWC DDR2/DDR1 Memory Controller
+ */
+#define DDR2C_BASE_A (CONFIG_DWCDDR21MCTL_BASE)
+#define DDR2C_CCR_A (DDR2C_BASE_A + DWCDDR21MCTL_CCR)
+#define DDR2C_DCR_A (DDR2C_BASE_A + DWCDDR21MCTL_DCR)
+#define DDR2C_IOCR_A (DDR2C_BASE_A + DWCDDR21MCTL_IOCR)
+#define DDR2C_CSR_A (DDR2C_BASE_A + DWCDDR21MCTL_CSR)
+#define DDR2C_DRR_A (DDR2C_BASE_A + DWCDDR21MCTL_DRR)
+#define DDR2C_DLLCR0_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR0)
+#define DDR2C_DLLCR1_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR1)
+#define DDR2C_DLLCR2_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR2)
+#define DDR2C_DLLCR3_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR3)
+#define DDR2C_DLLCR4_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR4)
+#define DDR2C_DLLCR5_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR5)
+#define DDR2C_DLLCR6_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR6)
+#define DDR2C_DLLCR7_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR7)
+#define DDR2C_DLLCR8_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR8)
+#define DDR2C_DLLCR9_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR9)
+#define DDR2C_RSLR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RSLR0)
+#define DDR2C_RDGR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RDGR0)
+#define DDR2C_DTAR_A (DDR2C_BASE_A + DWCDDR21MCTL_DTAR)
+#define DDR2C_MR_A (DDR2C_BASE_A + DWCDDR21MCTL_MR)
+
+#define DDR2C_CCR_D CONFIG_SYS_DWCDDR21MCTL_CCR
+#define DDR2C_CCR_D2 CONFIG_SYS_DWCDDR21MCTL_CCR2
+#define DDR2C_DCR_D CONFIG_SYS_DWCDDR21MCTL_DCR
+#define DDR2C_IOCR_D CONFIG_SYS_DWCDDR21MCTL_IOCR
+#define DDR2C_CSR_D CONFIG_SYS_DWCDDR21MCTL_CSR
+#define DDR2C_DRR_D CONFIG_SYS_DWCDDR21MCTL_DRR
+#define DDR2C_RSLR0_D CONFIG_SYS_DWCDDR21MCTL_RSLR0
+#define DDR2C_RDGR0_D CONFIG_SYS_DWCDDR21MCTL_RDGR0
+#define DDR2C_DTAR_D CONFIG_SYS_DWCDDR21MCTL_DTAR
+#define DDR2C_MR_D CONFIG_SYS_DWCDDR21MCTL_MR
+
+#define DDR2C_DLLCR0_D CONFIG_SYS_DWCDDR21MCTL_DLLCR0 /* 0-9 are same */
+
+/*
+ * parameters for the ahbc controller
+ */
+#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
+#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
+
+#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
+
+/*
+ * parameters for the ANDES PCU controller
+ */
+#define PCU_PCS4_A (CONFIG_ANDES_PCU_BASE + ANDES_PCU_PCS4)
+#define PCU_PCS4_D CONFIG_SYS_ANDES_CPU_PCS4
+
+/*
+ * numeric 7 segment display
+ */
+.macro led, num
+ write32 CONFIG_DEBUG_LED, \num
+.endm
+
+/*
+ * Waiting for SDRAM to set up
+ */
+/*
+.macro wait_sdram
+ li $r0, DDR2C_CSR_A
+1:
+ lwi $r1, [$r0+FTSDMC021_CR2]
+ bnez $r1, 1b
+.endm
+*/
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+.globl lowlevel_init
+lowlevel_init:
+ move $r10, $lp
+
+ /* U200 */
+! led 0x00
+! jal scale_to_500mhz
+
+ led 0x10
+ jal mem_init
+
+ led 0x20
+ jal remap
+
+ led 0x30
+ ret $r10
+
+scale_to_500mhz:
+ move $r11, $lp
+
+ /*
+ * scale to 500Mhz
+ */
+ led 0x01
+ write32 PCU_PCS4_A, 0x1102000f ! save data to PCS4
+
+ move $lp, $r11
+ ret
+
+mem_init:
+ move $r11, $lp
+
+ /*
+ * config AHB Controller
+ */
+ led 0x12
+ write32 AHBC_BSR6_A, AHBC_BSR6_D
+
+ /*
+ * config Synopsys DWC DDR2/DDR1 Memory Controller
+ */
+ddr2c_init:
+set_dcr:
+ led 0x14
+ write32 DDR2C_DCR_A, DDR2C_DCR_D ! 0x000020d4
+
+auto_sizing:
+ /*
+ * ebios: $r10->$r7, $r11->$r8, $r12->$r9, $r13->$r12, $r14->$r13
+ */
+set_iocr:
+ led 0x19
+ write32 DDR2C_IOCR_A, DDR2C_IOCR_D
+set_drr:
+ led 0x16
+ write32 DDR2C_DRR_A, DDR2C_DRR_D ! 0x00034812
+set_dllcr:
+ led 0x18
+ write32 DDR2C_DLLCR0_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR1_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR2_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR3_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR4_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR5_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR6_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR7_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR8_A, DDR2C_DLLCR0_D
+ write32 DDR2C_DLLCR9_A, DDR2C_DLLCR0_D
+set_rslr0:
+ write32 DDR2C_RSLR0_A, DDR2C_RSLR0_D ! 0x00000040
+set_rdgr0:
+ write32 DDR2C_RDGR0_A, DDR2C_RDGR0_D ! 0x000055cf
+set_dtar:
+ led 0x15
+ write32 DDR2C_DTAR_A, DDR2C_DTAR_D ! 0x00100000
+set_mode:
+ led 0x17
+ write32 DDR2C_MR_A, DDR2C_MR_D ! 0x00000852
+set_ccr:
+ write32 DDR2C_CCR_A, DDR2C_CCR_D
+
+#ifdef TRIGGER_INIT:
+trigger_init:
+ write32 DDR2C_CCR_A, DDR2C_CCR_D ! 0x80020000
+
+ /* Wait for ddr init state to be set */
+ msync ALL
+ isb
+
+ /* Wait until the config initialization is finish */
+1:
+ la $r4, DDR2C_CSR_A
+ lwi $r5, [$r4]
+ srli $r5, $r5, 23
+ bnez $r5, 1b
+#endif
+
+data_training:
+! write32 DDR2C_CCR_A, DDR2C_CCR_D2 ! 0x40020004
+
+ /* Wait for ddr init state to be set */
+ msync ALL
+ isb
+
+ /* wait until the ddr data trainning is complete */
+1:
+ la $r4, DDR2C_CSR_A
+ lwi $r5, [$r4]
+ srli $r6, $r5, 23
+ bnez $r6, 1b
+
+ lwi $r1, [$r4]
+ srli $r6, $r5, 20
+ li $r5, 0x00ffffff
+ swi $r1, [$r4]
+ bnez $r6, ddr2c_init
+
+ led 0x1a
+ move $lp, $r11
+ ret
+
+remap:
+ move $r11, $lp
+#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */
+ bal 2f
+relo_base:
+ move $r0, $lp
+#else
+relo_base:
+ mfusr $r0, $pc
+#endif /* __NDS32_N1213_43U1H__ */
+
+ /*
+ * Remapping
+ */
+#ifdef CONFIG_MEM_REMAP
+ /*
+ * Copy ROM code to SDRAM base for memory remap layout.
+ * This is not the real relocation, the real relocation is the function
+ * relocate_code() is start.S which supports the systems is memory
+ * remapped or not.
+ */
+ /*
+ * Doing memory remap is essential for preparing some non-OS or RTOS
+ * applications.
+ *
+ * This is also a must on ADP-AG101 board.
+ * The reason is because the ROM/FLASH circuit on PCB board.
+ * AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
+ * ROM/FLASH is used to boot.
+ *
+ * When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
+ * and the FLASH is connected to BANK1.
+ * When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
+ * and the FLASH is connected to BANK0.
+ * It will occur problem when doing flash probing if the flash is at
+ * BANK0 (0x00000000) while memory remapping was skipped.
+ *
+ * Other board like ADP-AG101P may not enable this since there is only
+ * a FLASH connected to bank0.
+ */
+ led 0x21
+ li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */
+ li $r5, 0x0
+ la $r1, relo_base /* get $pc or $lp */
+ sub $r2, $r0, $r1
+ sethi $r6, hi20(_end)
+ ori $r6, $r6, lo12(_end)
+ add $r6, $r6, $r2
+1:
+ lwi.p $r7, [$r5], #4
+ swi.p $r7, [$r4], #4
+ blt $r5, $r6, 1b
+
+ /* set remap bit */
+ /*
+ * MEM remap bit is operational
+ * - use it to map writeable memory at 0x00000000, in place of flash
+ * - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
+ * - after remap: flash/rom 0x80000000, sdram: 0x00000000
+ */
+ led 0x2c
+ setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
+
+#endif /* #ifdef CONFIG_MEM_REMAP */
+ move $lp, $r11
+2:
+ ret
+
+.globl show_led
+show_led:
+ li $r8, (CONFIG_DEBUG_LED)
+ swi $r7, [$r8]
+ ret
+#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/arch/nds32/cpu/n1213/ag102/timer.c b/arch/nds32/cpu/n1213/ag102/timer.c
new file mode 100644
index 0000000..caa36b8
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag102/timer.c
@@ -0,0 +1,205 @@
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <faraday/fttmr010.h>
+
+static ulong timestamp;
+static ulong lastdec;
+
+int timer_init(void)
+{
+ struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+ unsigned int cr;
+
+ debug("%s()\n", __func__);
+
+ /* disable timers */
+ writel(0, &tmr->cr);
+
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ /* use 32768Hz oscillator for RTC, WDT, TIMER */
+ ftpmu010_32768osc_enable();
+#endif
+
+ /* setup timer */
+ writel(TIMER_LOAD_VAL, &tmr->timer3_load);
+ writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
+ writel(0, &tmr->timer3_match1);
+ writel(0, &tmr->timer3_match2);
+
+ /* we don't want timer to issue interrupts */
+ writel(FTTMR010_TM3_MATCH1 |
+ FTTMR010_TM3_MATCH2 |
+ FTTMR010_TM3_OVERFLOW,
+ &tmr->interrupt_mask);
+
+ cr = readl(&tmr->cr);
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ cr |= FTTMR010_TM3_CLOCK; /* use external clock */
+#endif
+ cr |= FTTMR010_TM3_ENABLE;
+ writel(cr, &tmr->cr);
+
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+/*
+ * reset time
+ */
+void reset_timer_masked(void)
+{
+ struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+
+ /* capure current decrementer value time */
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
+#else
+ lastdec = readl(&tmr->timer3_counter) / (CONFIG_SYS_CLK_FREQ / 2);
+#endif
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+
+ debug("%s(): lastdec = %lx\n", __func__, lastdec);
+}
+
+void reset_timer(void)
+{
+ debug("%s()\n", __func__);
+ reset_timer_masked();
+}
+
+/*
+ * return timer ticks
+ */
+ulong get_timer_masked(void)
+{
+ struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+
+ /* current tick value */
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
+#else
+ ulong now = readl(&tmr->timer3_counter) / \
+ (CONFIG_SYS_CLK_FREQ / 2 / 1024);
+#endif
+
+ debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
+
+ if (lastdec >= now) {
+ /*
+ * normal mode (non roll)
+ * move stamp fordward with absoulte diff ticks
+ */
+ timestamp += lastdec - now;
+ } else {
+ /*
+ * we have overflow of the count down timer
+ *
+ * nts = ts + ld + (TLV - now)
+ * ts=old stamp, ld=time that passed before passing through -1
+ * (TLV-now) amount of time after passing though -1
+ * nts = new "advancing time stamp"...it could also roll and
+ * cause problems.
+ */
+ timestamp += lastdec + TIMER_LOAD_VAL - now;
+ }
+
+ lastdec = now;
+
+ debug("%s() returns %lx\n", __func__, timestamp);
+
+ return timestamp;
+}
+
+/*
+ * return difference between timer ticks and base
+ */
+ulong get_timer(ulong base)
+{
+ debug("%s(%lx)\n", __func__, base);
+ return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+ debug("%s(%lx)\n", __func__, t);
+ timestamp = t;
+}
+
+/* delay x useconds AND preserve advance timestamp value */
+void __udelay(unsigned long usec)
+{
+ struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
+#else
+ long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
+#endif
+ unsigned long now, last = readl(&tmr->timer3_counter);
+
+ debug("%s(%lu)\n", __func__, usec);
+ while (tmo > 0) {
+ now = readl(&tmr->timer3_counter);
+ if (now > last) /* count down timer overflow */
+ tmo -= TIMER_LOAD_VAL + last - now;
+ else
+ tmo -= last - now;
+ last = now;
+ }
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ debug("%s()\n", __func__);
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ debug("%s()\n", __func__);
+#ifdef CONFIG_FTTMR010_EXT_CLK
+ return CONFIG_SYS_HZ;
+#else
+ return CONFIG_SYS_CLK_FREQ;
+#endif
+}
diff --git a/arch/nds32/cpu/n1213/ag102/watchdog.S b/arch/nds32/cpu/n1213/ag102/watchdog.S
new file mode 100644
index 0000000..56cecda
--- /dev/null
+++ b/arch/nds32/cpu/n1213/ag102/watchdog.S
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch-ag102/ag102.h>
+#include <linux/linkage.h>
+
+.text
+
+#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
+ENTRY(turnoff_watchdog)
+
+#define WD_CR 0xC
+#define WD_ENABLE 0x1
+
+ ! Turn off the watchdog, according to Faraday FTWDT010 spec
+ li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR
+ lwi $p1, [$p0] ! Get the config of WD
+ andi $p1, $p1, 0x1f ! Wipe out useless bits
+ li $r0, ~WD_ENABLE
+ and $p1, $p1, $r0 ! Set WD disable
+ sw $p1, [$p0] ! Write back to WD CR
+
+ ! Disable Interrupts by clear GIE in $PSW reg
+ setgie.d
+
+ ret
+
+ENDPROC(turnoff_watchdog)
+#endif
diff --git a/arch/nds32/include/asm/arch-ag102/ag102.h b/arch/nds32/include/asm/arch-ag102/ag102.h
new file mode 100644
index 0000000..a12a8c5
--- /dev/null
+++ b/arch/nds32/include/asm/arch-ag102/ag102.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AG102_H
+#define __AG102_H
+
+/*
+ * Hardware register bases
+ */
+
+/* PCI Controller */
+#define CONFIG_FTPCI100_BASE 0x90000000
+/* LPC Controller */
+#define CONFIG_LPC_IO_BASE 0x90100000
+/* LPC Controller */
+#define CONFIG_LPC_BASE 0x90200000
+
+/* NDS32 Data Local Memory 01 */
+#define CONFIG_NDS_DLM1_BASE 0x90300000
+/* NDS32 Data Local Memory 02 */
+#define CONFIG_NDS_DLM2_BASE 0x90400000
+
+/* Synopsys DWC DDR2/1 Controller */
+#define CONFIG_DWCDDR21MCTL_BASE 0x90500000
+/* DMA Controller */
+#define CONFIG_FTDMAC020_BASE 0x90600000
+/* FTIDE020_S IDE (ATA) Controller */
+#define CONFIG_FTIDE020S_BASE 0x90700000
+/* USB OTG Controller */
+#define CONFIG_FZOTG266HD0A_BASE 0x90800000
+/* Andes L2 Cache Controller */
+#define CONFIG_NCEL2C100_BASE 0x90900000
+/* XGI XG22 GPU */
+#define CONFIG_XGI_XG22_BASE 0x90A00000
+/* GMAC Ethernet Controller */
+#define CONFIG_FTGMAC100_BASE 0x90B00000
+/* AHB Controller */
+#define CONFIG_FTAHBC020S_BASE 0x90C00000
+/* AHB-to-APB Bridge Controller */
+#define CONFIG_FTAPBBRG020S_01_BASE 0x90D00000
+/* External AHB2AHB Controller */
+#define CONFIG_EXT_AHB2AHB_BASE 0x90E00000
+/* Andes Multi-core Interrupt Controller */
+#define CONFIG_NCEMIC100_BASE 0x90F00000
+
+/*
+ * APB Device definitions
+ */
+/* Compat Flash Controller */
+#define CONFIG_FTCFC010_BASE 0x94000000
+/* APB - SSP (SPI) (without AC97) Controller */
+#define CONFIG_FTSSP010_01_BASE 0x94100000
+/* UART1 - APB STUART Controller (UART0 in Linux) */
+#define CONFIG_FTUART010_01_BASE 0x94200000
+/* FTSDC010 SD Controller */
+#define CONFIG_FTSDC010_BASE 0x94400000
+/* APB - SSP with HDA/AC97 Controller */
+#define CONFIG_FTSSP010_02_BASE 0x94500000
+/* UART2 - APB STUART Controller (UART1 in Linux) */
+#define CONFIG_FTUART010_02_BASE 0x94600000
+/* PCU Controller */
+#define CONFIG_ANDES_PCU_BASE 0x94800000
+/* FTTMR010 Timer */
+#define CONFIG_FTTMR010_BASE 0x94900000
+/* Watch Dog Controller */
+#define CONFIG_FTWDT010_BASE 0x94A00000
+/* FTRTC010 Real Time Clock */
+#define CONFIG_FTRTC010_BASE 0x98B00000
+/* GPIO Controller */
+#define CONFIG_FTGPIO010_BASE 0x94C00000
+/* I2C Controller */
+#define CONFIG_FTIIC010_BASE 0x94E00000
+/* PWM - Pulse Width Modulator Controller */
+#define CONFIG_FTPWM010_BASE 0x94F00000
+
+/* Debug LED */
+#define CONFIG_DEBUG_LED 0x902FFFFC
+/* Power Management Unit */
+#define CONFIG_FTPMU010_BASE 0x98100000
+
+#endif /* __AG102_H */
diff --git a/arch/nds32/include/asm/mach-types.h b/arch/nds32/include/asm/mach-types.h
index 7b52b98..259e4e7 100644
--- a/arch/nds32/include/asm/mach-types.h
+++ b/arch/nds32/include/asm/mach-types.h
@@ -40,4 +40,18 @@
# define machine_is_adpag101p() (1)
#endif
+#define MACH_TYPE_ADPAG102 2
+
+#ifdef CONFIG_ARCH_ADPAG102
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_ADPAG102
+# endif
+# define machine_is_adpag102() (machine_arch_type == MACH_TYPE_ADPAG102)
+#else
+# define machine_is_adpag102() (2)
+#endif
+
#endif /* __ASM_NDS32_MACH_TYPE_H */
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 2e4a06c..2cd5db7 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -37,6 +37,7 @@
#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
+#include <asm/fsl_srio.h>
#include <linux/compiler.h>
#include "mp.h"
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
@@ -48,8 +49,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern void srio_init(void);
-
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
@@ -443,6 +442,12 @@
#ifdef CONFIG_SYS_SRIO
srio_init();
+#ifdef CONFIG_SRIOBOOT_MASTER
+ srio_boot_master();
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+ srio_boot_master_release_slave();
+#endif
+#endif
#endif
#if defined(CONFIG_MP)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 4d37d6e..8e99ef6 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1,5 +1,5 @@
/*
- * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007-2012 Freescale Semiconductor, Inc.
* Copyright (C) 2003 Motorola,Inc.
*
* See file CREDITS for list of people who contributed to this
@@ -179,41 +179,50 @@
andi. r1,r3,L1CSR0_DCE@l
beq 2b
+/*
+ * Ne need to setup interrupt vector for NAND SPL
+ * because NAND SPL never compiles it.
+ */
+#if !defined(CONFIG_NAND_SPL)
/* Setup interrupt vectors */
lis r1,CONFIG_SYS_MONITOR_BASE@h
mtspr IVPR,r1
- li r1,0x0100
- mtspr IVOR0,r1 /* 0: Critical input */
- li r1,0x0200
- mtspr IVOR1,r1 /* 1: Machine check */
- li r1,0x0300
- mtspr IVOR2,r1 /* 2: Data storage */
- li r1,0x0400
- mtspr IVOR3,r1 /* 3: Instruction storage */
- li r1,0x0500
- mtspr IVOR4,r1 /* 4: External interrupt */
- li r1,0x0600
- mtspr IVOR5,r1 /* 5: Alignment */
- li r1,0x0700
- mtspr IVOR6,r1 /* 6: Program check */
- li r1,0x0800
- mtspr IVOR7,r1 /* 7: floating point unavailable */
- li r1,0x0900
- mtspr IVOR8,r1 /* 8: System call */
+ lis r3,(CONFIG_SYS_MONITOR_BASE & 0xffff)@h
+ ori r3,r3,(CONFIG_SYS_MONITOR_BASE & 0xffff)@l
+
+ addi r4,r3,CriticalInput - _start + _START_OFFSET
+ mtspr IVOR0,r4 /* 0: Critical input */
+ addi r4,r3,MachineCheck - _start + _START_OFFSET
+ mtspr IVOR1,r4 /* 1: Machine check */
+ addi r4,r3,DataStorage - _start + _START_OFFSET
+ mtspr IVOR2,r4 /* 2: Data storage */
+ addi r4,r3,InstStorage - _start + _START_OFFSET
+ mtspr IVOR3,r4 /* 3: Instruction storage */
+ addi r4,r3,ExtInterrupt - _start + _START_OFFSET
+ mtspr IVOR4,r4 /* 4: External interrupt */
+ addi r4,r3,Alignment - _start + _START_OFFSET
+ mtspr IVOR5,r4 /* 5: Alignment */
+ addi r4,r3,ProgramCheck - _start + _START_OFFSET
+ mtspr IVOR6,r4 /* 6: Program check */
+ addi r4,r3,FPUnavailable - _start + _START_OFFSET
+ mtspr IVOR7,r4 /* 7: floating point unavailable */
+ addi r4,r3,SystemCall - _start + _START_OFFSET
+ mtspr IVOR8,r4 /* 8: System call */
/* 9: Auxiliary processor unavailable(unsupported) */
- li r1,0x0a00
- mtspr IVOR10,r1 /* 10: Decrementer */
- li r1,0x0b00
- mtspr IVOR11,r1 /* 11: Interval timer */
- li r1,0x0c00
- mtspr IVOR12,r1 /* 12: Watchdog timer */
- li r1,0x0d00
- mtspr IVOR13,r1 /* 13: Data TLB error */
- li r1,0x0e00
- mtspr IVOR14,r1 /* 14: Instruction TLB error */
- li r1,0x0f00
- mtspr IVOR15,r1 /* 15: Debug */
+ addi r4,r3,Decrementer - _start + _START_OFFSET
+ mtspr IVOR10,r4 /* 10: Decrementer */
+ addi r4,r3,IntervalTimer - _start + _START_OFFSET
+ mtspr IVOR11,r4 /* 11: Interval timer */
+ addi r4,r3,WatchdogTimer - _start + _START_OFFSET
+ mtspr IVOR12,r4 /* 12: Watchdog timer */
+ addi r4,r3,DataTLBError - _start + _START_OFFSET
+ mtspr IVOR13,r4 /* 13: Data TLB error */
+ addi r4,r3,InstructionTLBError - _start + _START_OFFSET
+ mtspr IVOR14,r4 /* 14: Instruction TLB error */
+ addi r4,r3,DebugBreakpoint - _start + _START_OFFSET
+ mtspr IVOR15,r4 /* 15: Debug */
+#endif
/* Clear and set up some registers. */
li r0,0x0000
@@ -434,13 +443,15 @@
ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
+#ifdef CONFIG_ENABLE_36BIT_PHYS
lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ mtspr MAS7, r7
+#endif
mtspr MAS0, r0
mtspr MAS1, r1
mtspr MAS2, r2
mtspr MAS3, r3
- mtspr MAS7, r7
isync
msync
tlbwe
@@ -456,12 +467,14 @@
ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
+#ifdef CONFIG_ENABLE_36BIT_PHYS
li r7, 0 /* The default CCSR address is always a 32-bit number */
+ mtspr MAS7, r7
+#endif
mtspr MAS0, r0
/* MAS1 is the same as above */
mtspr MAS2, r2
mtspr MAS3, r3
- mtspr MAS7, r7
isync
msync
tlbwe
@@ -1490,6 +1503,39 @@
cmplw 0,r7,r8
blt 2b
+ /* Update IVORs as per relocated vector table address */
+ li r7,0x0100
+ mtspr IVOR0,r7 /* 0: Critical input */
+ li r7,0x0200
+ mtspr IVOR1,r7 /* 1: Machine check */
+ li r7,0x0300
+ mtspr IVOR2,r7 /* 2: Data storage */
+ li r7,0x0400
+ mtspr IVOR3,r7 /* 3: Instruction storage */
+ li r7,0x0500
+ mtspr IVOR4,r7 /* 4: External interrupt */
+ li r7,0x0600
+ mtspr IVOR5,r7 /* 5: Alignment */
+ li r7,0x0700
+ mtspr IVOR6,r7 /* 6: Program check */
+ li r7,0x0800
+ mtspr IVOR7,r7 /* 7: floating point unavailable */
+ li r7,0x0900
+ mtspr IVOR8,r7 /* 8: System call */
+ /* 9: Auxiliary processor unavailable(unsupported) */
+ li r7,0x0a00
+ mtspr IVOR10,r7 /* 10: Decrementer */
+ li r7,0x0b00
+ mtspr IVOR11,r7 /* 11: Interval timer */
+ li r7,0x0c00
+ mtspr IVOR12,r7 /* 12: Watchdog timer */
+ li r7,0x0d00
+ mtspr IVOR13,r7 /* 13: Data TLB error */
+ li r7,0x0e00
+ mtspr IVOR14,r7 /* 14: Instruction TLB error */
+ li r7,0x0f00
+ mtspr IVOR15,r7 /* 15: Debug */
+
lis r7,0x0
mtspr IVPR,r7
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
index 04bc731..b1a1dac 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -87,7 +87,7 @@
.bootpg ADDR(.text) - 0x1000 :
{
- arch/powerpc/cpu/mpc85xx/start.o KEEP(*(.bootpg))
+ KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg))
} :text = 0xffff
. = ADDR(.text) + 0x80000;
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index e46d328..c7f3949 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -21,6 +21,16 @@
#include <config.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
+#include <asm/fsl_srio.h>
+
+#define SRIO_PORT_ACCEPT_ALL 0x10000001
+#define SRIO_IB_ATMU_AR 0x80f55000
+#define SRIO_OB_ATMU_AR_MAINT 0x80077000
+#define SRIO_OB_ATMU_AR_RW 0x80045000
+#define SRIO_LCSBA1CSR_OFFSET 0x5c
+#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
+#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
+#define SRIO_LCSBA1CSR 0x60000000
#if defined(CONFIG_FSL_CORENET)
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
@@ -84,3 +94,203 @@
setbits_be32(&gur->devdisr, _DEVDISR_RMU);
}
}
+
+#ifdef CONFIG_SRIOBOOT_MASTER
+void srio_boot_master(void)
+{
+ struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+
+ /* set port accept-all */
+ out_be32((void *)&srio->impl.port[CONFIG_SRIOBOOT_MASTER_PORT].ptaacr,
+ SRIO_PORT_ACCEPT_ALL);
+
+ debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ /* configure inbound window for slave's u-boot image */
+ debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
+ "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
+ (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1,
+ (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1,
+ CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwtar,
+ CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwbar,
+ CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwar,
+ SRIO_IB_ATMU_AR
+ | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE));
+
+ /* configure inbound window for slave's u-boot image */
+ debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
+ "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
+ (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2,
+ (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2,
+ CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwtar,
+ CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwbar,
+ CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwar,
+ SRIO_IB_ATMU_AR
+ | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE));
+
+ /* configure inbound window for slave's ucode */
+ debug("SRIOBOOT - MASTER: Inbound window for slave's ucode; "
+ "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
+ (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS,
+ (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS,
+ CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwtar,
+ CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwbar,
+ CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwar,
+ SRIO_IB_ATMU_AR
+ | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE));
+
+ /* configure inbound window for slave's ENV */
+ debug("SRIOBOOT - MASTER: Inbound window for slave's ENV; "
+ "Local = 0x%llx, Siro = 0x%llx, Size = 0x%x\n",
+ CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS,
+ CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS,
+ CONFIG_SRIOBOOT_SLAVE_ENV_SIZE);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwtar,
+ CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwbar,
+ CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwar,
+ SRIO_IB_ATMU_AR
+ | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE));
+}
+
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+void srio_boot_master_release_slave(void)
+{
+ struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+ u32 escsr;
+ debug("SRIOBOOT - MASTER: "
+ "Check the port status and release slave core ...\n");
+
+ escsr = in_be32((void *)&srio->lp_serial
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr);
+ if (escsr & 0x2) {
+ if (escsr & 0x10100) {
+ debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ } else {
+ debug("SRIOBOOT - MASTER: "
+ "Port [ %d ] is ready, now release slave's core ...\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ /*
+ * configure outbound window
+ * with maintenance attribute to set slave's LCSBA1CSR
+ */
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowtar, 0);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowtear, 0);
+ if (CONFIG_SRIOBOOT_MASTER_PORT)
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowbar,
+ CONFIG_SYS_SRIO2_MEM_PHYS >> 12);
+ else
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowbar,
+ CONFIG_SYS_SRIO1_MEM_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowar,
+ SRIO_OB_ATMU_AR_MAINT
+ | atmu_size_mask(SRIO_MAINT_WIN_SIZE));
+
+ /*
+ * configure outbound window
+ * with R/W attribute to set slave's BRR
+ */
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowtar,
+ SRIO_LCSBA1CSR >> 9);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowtear, 0);
+ if (CONFIG_SRIOBOOT_MASTER_PORT)
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowbar,
+ (CONFIG_SYS_SRIO2_MEM_PHYS
+ + SRIO_MAINT_WIN_SIZE) >> 12);
+ else
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowbar,
+ (CONFIG_SYS_SRIO1_MEM_PHYS
+ + SRIO_MAINT_WIN_SIZE) >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowar,
+ SRIO_OB_ATMU_AR_RW
+ | atmu_size_mask(SRIO_RW_WIN_SIZE));
+
+ /*
+ * Set the LCSBA1CSR register in slave
+ * by the maint-outbound window
+ */
+ if (CONFIG_SRIOBOOT_MASTER_PORT) {
+ out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET,
+ SRIO_LCSBA1CSR);
+ while (in_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET)
+ != SRIO_LCSBA1CSR)
+ ;
+ /*
+ * And then set the BRR register
+ * to release slave core
+ */
+ out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_MAINT_WIN_SIZE
+ + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
+ CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+ } else {
+ out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET,
+ SRIO_LCSBA1CSR);
+ while (in_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET)
+ != SRIO_LCSBA1CSR)
+ ;
+ /*
+ * And then set the BRR register
+ * to release slave core
+ */
+ out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_MAINT_WIN_SIZE
+ + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
+ CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+ }
+ debug("SRIOBOOT - MASTER: "
+ "Release slave successfully! Now the slave should start up!\n");
+ }
+ } else
+ debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+}
+#endif
+#endif
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 8654625..191629b 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -65,6 +65,11 @@
#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
#define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_RMU
+#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_MPC8555)
#define CONFIG_MAX_CPUS 1
@@ -85,6 +90,11 @@
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_RMU
+#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_MPC8569)
#define CONFIG_MAX_CPUS 1
@@ -94,6 +104,11 @@
#define MAX_QE_RISC 4
#define QE_NUM_OF_SNUM 46
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_RMU
+#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_MPC8572)
#define CONFIG_MAX_CPUS 2
@@ -298,6 +313,11 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_RMU
+#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_PPC_P2040)
#define CONFIG_MAX_CPUS 4
@@ -317,6 +337,9 @@
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_P2041)
#define CONFIG_MAX_CPUS 4
@@ -338,6 +361,9 @@
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_P3041)
#define CONFIG_MAX_CPUS 4
@@ -359,6 +385,9 @@
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_P3060)
#define CONFIG_MAX_CPUS 8
@@ -375,6 +404,9 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_P4040)
#define CONFIG_MAX_CPUS 4
@@ -387,6 +419,9 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_P4080)
#define CONFIG_MAX_CPUS 8
@@ -417,6 +452,11 @@
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_RMU
+#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
/* P5010 is single core version of P5020 */
#elif defined(CONFIG_PPC_P5010)
@@ -438,6 +478,9 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_P5020)
#define CONFIG_MAX_CPUS 2
@@ -458,6 +501,9 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#else
#error Processor type not defined for this platform
diff --git a/arch/powerpc/include/asm/fsl_srio.h b/arch/powerpc/include/asm/fsl_srio.h
new file mode 100644
index 0000000..a905a26
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_srio.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _FSL_SRIO_H_
+#define _FSL_SRIO_H_
+
+enum atmu_size {
+ ATMU_SIZE_4K = 0xb,
+ ATMU_SIZE_8K,
+ ATMU_SIZE_16K,
+ ATMU_SIZE_32K,
+ ATMU_SIZE_64K,
+ ATMU_SIZE_128K,
+ ATMU_SIZE_256K,
+ ATMU_SIZE_512K,
+ ATMU_SIZE_1M,
+ ATMU_SIZE_2M,
+ ATMU_SIZE_4M,
+ ATMU_SIZE_8M,
+ ATMU_SIZE_16M,
+ ATMU_SIZE_32M,
+ ATMU_SIZE_64M,
+ ATMU_SIZE_128M,
+ ATMU_SIZE_256M,
+ ATMU_SIZE_512M,
+ ATMU_SIZE_1G,
+ ATMU_SIZE_2G,
+ ATMU_SIZE_4G,
+ ATMU_SIZE_8G,
+ ATMU_SIZE_16G,
+ ATMU_SIZE_32G,
+ ATMU_SIZE_64G,
+};
+
+#define atmu_size_mask(sz) (__ilog2_u64(sz) - 1)
+#define atmu_size_bytes(x) (1ULL << ((x & 0x3f) + 1))
+
+extern void srio_init(void);
+#ifdef CONFIG_SRIOBOOT_MASTER
+extern void srio_boot_master(void);
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+extern void srio_boot_master_release_slave(void);
+#endif
+#endif
+#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 9b08cb8..632e3c1 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1353,171 +1353,235 @@
} ccsr_cpm_t;
#endif
-/* RapidIO Registers */
-typedef struct ccsr_rio {
- u32 didcar; /* Device Identity Capability */
- u32 dicar; /* Device Information Capability */
- u32 aidcar; /* Assembly Identity Capability */
- u32 aicar; /* Assembly Information Capability */
- u32 pefcar; /* Processing Element Features Capability */
- u32 spicar; /* Switch Port Information Capability */
- u32 socar; /* Source Operations Capability */
- u32 docar; /* Destination Operations Capability */
+#ifdef CONFIG_SYS_SRIO
+/* Architectural regsiters */
+struct rio_arch {
+ u32 didcar; /* Device Identity CAR */
+ u32 dicar; /* Device Information CAR */
+ u32 aidcar; /* Assembly Identity CAR */
+ u32 aicar; /* Assembly Information CAR */
+ u32 pefcar; /* Processing Element Features CAR */
+ u8 res0[4];
+ u32 socar; /* Source Operations CAR */
+ u32 docar; /* Destination Operations CAR */
u8 res1[32];
- u32 msr; /* Mailbox Cmd And Status */
- u32 pwdcsr; /* Port-Write & Doorbell Cmd And Status */
+ u32 mcsr; /* Mailbox CSR */
+ u32 pwdcsr; /* Port-Write and Doorbell CSR */
u8 res2[4];
u32 pellccsr; /* Processing Element Logic Layer CCSR */
u8 res3[12];
- u32 lcsbacsr; /* Local Cfg Space Base Addr Cmd & Status */
- u32 bdidcsr; /* Base Device ID Cmd & Status */
+ u32 lcsbacsr; /* Local Configuration Space BACSR */
+ u32 bdidcsr; /* Base Device ID CSR */
u8 res4[4];
- u32 hbdidlcsr; /* Host Base Device ID Lock Cmd & Status */
- u32 ctcsr; /* Component Tag Cmd & Status */
- u8 res5[144];
- u32 pmbh0csr; /* Port Maint. Block Hdr 0 Cmd & Status */
- u8 res6[28];
- u32 pltoccsr; /* Port Link Time-out Ctrl Cmd & Status */
- u32 prtoccsr; /* Port Response Time-out Ctrl Cmd & Status */
- u8 res7[20];
- u32 pgccsr; /* Port General Cmd & Status */
- u32 plmreqcsr; /* Port Link Maint. Request Cmd & Status */
- u32 plmrespcsr; /* Port Link Maint. Response Cmd & Status */
- u32 plascsr; /* Port Local Ackid Status Cmd & Status */
- u8 res8[12];
- u32 pescsr; /* Port Error & Status Cmd & Status */
- u32 pccsr; /* Port Control Cmd & Status */
- u8 res9[65184];
- u32 cr; /* Port Control Cmd & Status */
- u8 res10[12];
- u32 pcr; /* Port Configuration */
- u32 peir; /* Port Error Injection */
- u8 res11[3048];
- u32 rowtar0; /* RIO Outbound Window Translation Addr 0 */
- u8 res12[12];
- u32 rowar0; /* RIO Outbound Attrs 0 */
- u8 res13[12];
- u32 rowtar1; /* RIO Outbound Window Translation Addr 1 */
- u8 res14[4];
- u32 rowbar1; /* RIO Outbound Window Base Addr 1 */
- u8 res15[4];
- u32 rowar1; /* RIO Outbound Attrs 1 */
- u8 res16[12];
- u32 rowtar2; /* RIO Outbound Window Translation Addr 2 */
- u8 res17[4];
- u32 rowbar2; /* RIO Outbound Window Base Addr 2 */
- u8 res18[4];
- u32 rowar2; /* RIO Outbound Attrs 2 */
- u8 res19[12];
- u32 rowtar3; /* RIO Outbound Window Translation Addr 3 */
- u8 res20[4];
- u32 rowbar3; /* RIO Outbound Window Base Addr 3 */
- u8 res21[4];
- u32 rowar3; /* RIO Outbound Attrs 3 */
- u8 res22[12];
- u32 rowtar4; /* RIO Outbound Window Translation Addr 4 */
- u8 res23[4];
- u32 rowbar4; /* RIO Outbound Window Base Addr 4 */
- u8 res24[4];
- u32 rowar4; /* RIO Outbound Attrs 4 */
- u8 res25[12];
- u32 rowtar5; /* RIO Outbound Window Translation Addr 5 */
- u8 res26[4];
- u32 rowbar5; /* RIO Outbound Window Base Addr 5 */
- u8 res27[4];
- u32 rowar5; /* RIO Outbound Attrs 5 */
- u8 res28[12];
- u32 rowtar6; /* RIO Outbound Window Translation Addr 6 */
- u8 res29[4];
- u32 rowbar6; /* RIO Outbound Window Base Addr 6 */
- u8 res30[4];
- u32 rowar6; /* RIO Outbound Attrs 6 */
- u8 res31[12];
- u32 rowtar7; /* RIO Outbound Window Translation Addr 7 */
- u8 res32[4];
- u32 rowbar7; /* RIO Outbound Window Base Addr 7 */
- u8 res33[4];
- u32 rowar7; /* RIO Outbound Attrs 7 */
- u8 res34[12];
- u32 rowtar8; /* RIO Outbound Window Translation Addr 8 */
- u8 res35[4];
- u32 rowbar8; /* RIO Outbound Window Base Addr 8 */
- u8 res36[4];
- u32 rowar8; /* RIO Outbound Attrs 8 */
- u8 res37[76];
- u32 riwtar4; /* RIO Inbound Window Translation Addr 4 */
- u8 res38[4];
- u32 riwbar4; /* RIO Inbound Window Base Addr 4 */
- u8 res39[4];
- u32 riwar4; /* RIO Inbound Attrs 4 */
- u8 res40[12];
- u32 riwtar3; /* RIO Inbound Window Translation Addr 3 */
- u8 res41[4];
- u32 riwbar3; /* RIO Inbound Window Base Addr 3 */
- u8 res42[4];
- u32 riwar3; /* RIO Inbound Attrs 3 */
- u8 res43[12];
- u32 riwtar2; /* RIO Inbound Window Translation Addr 2 */
- u8 res44[4];
- u32 riwbar2; /* RIO Inbound Window Base Addr 2 */
- u8 res45[4];
- u32 riwar2; /* RIO Inbound Attrs 2 */
- u8 res46[12];
- u32 riwtar1; /* RIO Inbound Window Translation Addr 1 */
- u8 res47[4];
- u32 riwbar1; /* RIO Inbound Window Base Addr 1 */
- u8 res48[4];
- u32 riwar1; /* RIO Inbound Attrs 1 */
- u8 res49[12];
- u32 riwtar0; /* RIO Inbound Window Translation Addr 0 */
- u8 res50[12];
- u32 riwar0; /* RIO Inbound Attrs 0 */
- u8 res51[12];
- u32 pnfedr; /* Port Notification/Fatal Error Detect */
- u32 pnfedir; /* Port Notification/Fatal Error Detect */
- u32 pnfeier; /* Port Notification/Fatal Error IRQ Enable */
- u32 pecr; /* Port Error Control */
- u32 pepcsr0; /* Port Error Packet/Control Symbol 0 */
- u32 pepr1; /* Port Error Packet 1 */
- u32 pepr2; /* Port Error Packet 2 */
- u8 res52[4];
- u32 predr; /* Port Recoverable Error Detect */
- u8 res53[4];
- u32 pertr; /* Port Error Recovery Threshold */
- u32 prtr; /* Port Retry Threshold */
- u8 res54[464];
- u32 omr; /* Outbound Mode */
- u32 osr; /* Outbound Status */
- u32 eodqtpar; /* Extended Outbound Desc Queue Tail Ptr Addr */
- u32 odqtpar; /* Outbound Desc Queue Tail Ptr Addr */
- u32 eosar; /* Extended Outbound Unit Source Addr */
- u32 osar; /* Outbound Unit Source Addr */
- u32 odpr; /* Outbound Destination Port */
- u32 odatr; /* Outbound Destination Attrs */
- u32 odcr; /* Outbound Doubleword Count */
- u32 eodqhpar; /* Extended Outbound Desc Queue Head Ptr Addr */
- u32 odqhpar; /* Outbound Desc Queue Head Ptr Addr */
- u8 res55[52];
- u32 imr; /* Outbound Mode */
- u32 isr; /* Inbound Status */
- u32 eidqtpar; /* Extended Inbound Desc Queue Tail Ptr Addr */
- u32 idqtpar; /* Inbound Desc Queue Tail Ptr Addr */
- u32 eifqhpar; /* Extended Inbound Frame Queue Head Ptr Addr */
- u32 ifqhpar; /* Inbound Frame Queue Head Ptr Addr */
- u8 res56[1000];
- u32 dmr; /* Doorbell Mode */
- u32 dsr; /* Doorbell Status */
- u32 edqtpar; /* Extended Doorbell Queue Tail Ptr Addr */
- u32 dqtpar; /* Doorbell Queue Tail Ptr Addr */
- u32 edqhpar; /* Extended Doorbell Queue Head Ptr Addr */
- u32 dqhpar; /* Doorbell Queue Head Ptr Addr */
- u8 res57[104];
- u32 pwmr; /* Port-Write Mode */
- u32 pwsr; /* Port-Write Status */
- u32 epwqbar; /* Extended Port-Write Queue Base Addr */
- u32 pwqbar; /* Port-Write Queue Base Addr */
- u8 res58[60176];
-} ccsr_rio_t;
+ u32 hbdidlcsr; /* Host Base Device ID Lock CSR */
+ u32 ctcsr; /* Component Tag CSR */
+};
+
+/* Extended Features Space: 1x/4x LP-Serial Port registers */
+struct rio_lp_serial_port {
+ u32 plmreqcsr; /* Port Link Maintenance Request CSR */
+ u32 plmrespcsr; /* Port Link Maintenance Response CS */
+ u32 plascsr; /* Port Local Ackid Status CSR */
+ u8 res0[12];
+ u32 pescsr; /* Port Error and Status CSR */
+ u32 pccsr; /* Port Control CSR */
+};
+
+/* Extended Features Space: 1x/4x LP-Serial registers */
+struct rio_lp_serial {
+ u32 pmbh0csr; /* Port Maintenance Block Header 0 CSR */
+ u8 res0[28];
+ u32 pltoccsr; /* Port Link Time-out CCSR */
+ u32 prtoccsr; /* Port Response Time-out CCSR */
+ u8 res1[20];
+ u32 pgccsr; /* Port General CSR */
+ struct rio_lp_serial_port port[CONFIG_SYS_FSL_SRIO_MAX_PORTS];
+};
+
+/* Logical error reporting registers */
+struct rio_logical_err {
+ u32 erbh; /* Error Reporting Block Header Register */
+ u8 res0[4];
+ u32 ltledcsr; /* Logical/Transport layer error DCSR */
+ u32 ltleecsr; /* Logical/Transport layer error ECSR */
+ u8 res1[4];
+ u32 ltlaccsr; /* Logical/Transport layer ACCSR */
+ u32 ltldidccsr; /* Logical/Transport layer DID CCSR */
+ u32 ltlcccsr; /* Logical/Transport layer control CCSR */
+};
+
+/* Physical error reporting port registers */
+struct rio_phys_err_port {
+ u32 edcsr; /* Port error detect CSR */
+ u32 erecsr; /* Port error rate enable CSR */
+ u32 ecacsr; /* Port error capture attributes CSR */
+ u32 pcseccsr0; /* Port packet/control symbol ECCSR 0 */
+ u32 peccsr[3]; /* Port error capture CSR */
+ u8 res0[12];
+ u32 ercsr; /* Port error rate CSR */
+ u32 ertcsr; /* Port error rate threshold CSR */
+ u8 res1[16];
+};
+
+/* Physical error reporting registers */
+struct rio_phys_err {
+ struct rio_phys_err_port port[CONFIG_SYS_FSL_SRIO_MAX_PORTS];
+};
+
+/* Implementation Space: General Port-Common */
+struct rio_impl_common {
+ u8 res0[4];
+ u32 llcr; /* Logical Layer Configuration Register */
+ u8 res1[8];
+ u32 epwisr; /* Error / Port-Write Interrupt SR */
+ u8 res2[12];
+ u32 lretcr; /* Logical Retry Error Threshold CR */
+ u8 res3[92];
+ u32 pretcr; /* Physical Retry Erorr Threshold CR */
+ u8 res4[124];
+};
+
+/* Implementation Space: Port Specific */
+struct rio_impl_port_spec {
+ u32 adidcsr; /* Port Alt. Device ID CSR */
+ u8 res0[28];
+ u32 ptaacr; /* Port Pass-Through/Accept-All CR */
+ u32 lopttlcr;
+ u8 res1[8];
+ u32 iecsr; /* Port Implementation Error CSR */
+ u8 res2[12];
+ u32 pcr; /* Port Phsyical Configuration Register */
+ u8 res3[20];
+ u32 slcsr; /* Port Serial Link CSR */
+ u8 res4[4];
+ u32 sleicr; /* Port Serial Link Error Injection */
+ u32 a0txcr; /* Port Arbitration 0 Tx CR */
+ u32 a1txcr; /* Port Arbitration 1 Tx CR */
+ u32 a2txcr; /* Port Arbitration 2 Tx CR */
+ u32 mreqtxbacr[3]; /* Port Request Tx Buffer ACR */
+ u32 mrspfctxbacr; /* Port Response/Flow Control Tx Buffer ACR */
+};
+
+/* Implementation Space: register */
+struct rio_implement {
+ struct rio_impl_common com;
+ struct rio_impl_port_spec port[CONFIG_SYS_FSL_SRIO_MAX_PORTS];
+};
+
+/* Revision Control Register */
+struct rio_rev_ctrl {
+ u32 ipbrr[2]; /* IP Block Revision Register */
+};
+
+struct rio_atmu_row {
+ u32 rowtar; /* RapidIO Outbound Window TAR */
+ u32 rowtear; /* RapidIO Outbound Window TEAR */
+ u32 rowbar;
+ u8 res0[4];
+ u32 rowar; /* RapidIO Outbound Attributes Register */
+ u32 rowsr[3]; /* Port RapidIO outbound window segment register */
+};
+
+struct rio_atmu_riw {
+ u32 riwtar; /* RapidIO Inbound Window Translation AR */
+ u8 res0[4];
+ u32 riwbar; /* RapidIO Inbound Window Base AR */
+ u8 res1[4];
+ u32 riwar; /* RapidIO Inbound Attributes Register */
+ u8 res2[12];
+};
+
+/* ATMU window registers */
+struct rio_atmu_win {
+ struct rio_atmu_row outbw[CONFIG_SYS_FSL_SRIO_OB_WIN_NUM];
+ u8 res0[64];
+ struct rio_atmu_riw inbw[CONFIG_SYS_FSL_SRIO_IB_WIN_NUM];
+};
+
+struct rio_atmu {
+ struct rio_atmu_win port[CONFIG_SYS_FSL_SRIO_MAX_PORTS];
+};
+
+#ifdef CONFIG_SYS_FSL_RMU
+struct rio_msg {
+ u32 omr; /* Outbound Mode Register */
+ u32 osr; /* Outbound Status Register */
+ u32 eodqdpar; /* Extended Outbound DQ DPAR */
+ u32 odqdpar; /* Outbound Descriptor Queue DPAR */
+ u32 eosar; /* Extended Outbound Unit Source AR */
+ u32 osar; /* Outbound Unit Source AR */
+ u32 odpr; /* Outbound Destination Port Register */
+ u32 odatr; /* Outbound Destination Attributes Register */
+ u32 odcr; /* Outbound Doubleword Count Register */
+ u32 eodqepar; /* Extended Outbound DQ EPAR */
+ u32 odqepar; /* Outbound Descriptor Queue EPAR */
+ u32 oretr; /* Outbound Retry Error Threshold Register */
+ u32 omgr; /* Outbound Multicast Group Register */
+ u32 omlr; /* Outbound Multicast List Register */
+ u8 res0[40];
+ u32 imr; /* Outbound Mode Register */
+ u32 isr; /* Inbound Status Register */
+ u32 eidqdpar; /* Extended Inbound Descriptor Queue DPAR */
+ u32 idqdpar; /* Inbound Descriptor Queue DPAR */
+ u32 eifqepar; /* Extended Inbound Frame Queue EPAR */
+ u32 ifqepar; /* Inbound Frame Queue EPAR */
+ u32 imirir; /* Inbound Maximum Interrutp RIR */
+ u8 res1[4];
+ u32 eihqepar; /* Extended inbound message header queue EPAR */
+ u32 ihqepar; /* Inbound message header queue EPAR */
+ u8 res2[120];
+};
+
+struct rio_dbell {
+ u32 odmr; /* Outbound Doorbell Mode Register */
+ u32 odsr; /* Outbound Doorbell Status Register */
+ u8 res0[16];
+ u32 oddpr; /* Outbound Doorbell Destination Port */
+ u32 oddatr; /* Outbound Doorbell Destination AR */
+ u8 res1[12];
+ u32 oddretr; /* Outbound Doorbell Retry Threshold CR */
+ u8 res2[48];
+ u32 idmr; /* Inbound Doorbell Mode Register */
+ u32 idsr; /* Inbound Doorbell Status Register */
+ u32 iedqdpar; /* Extended Inbound Doorbell Queue DPAR */
+ u32 iqdpar; /* Inbound Doorbell Queue DPAR */
+ u32 iedqepar; /* Extended Inbound Doorbell Queue EPAR */
+ u32 idqepar; /* Inbound Doorbell Queue EPAR */
+ u32 idmirir; /* Inbound Doorbell Max Interrupt RIR */
+};
+
+struct rio_pw {
+ u32 pwmr; /* Port-Write Mode Register */
+ u32 pwsr; /* Port-Write Status Register */
+ u32 epwqbar; /* Extended Port-Write Queue BAR */
+ u32 pwqbar; /* Port-Write Queue Base Address Register */
+};
+#endif
+
+/* RapidIO Registers */
+struct ccsr_rio {
+ struct rio_arch arch;
+ u8 res0[144];
+ struct rio_lp_serial lp_serial;
+ u8 res1[1152];
+ struct rio_logical_err logical_err;
+ u8 res2[32];
+ struct rio_phys_err phys_err;
+ u8 res3[63808];
+ struct rio_implement impl;
+ u8 res4[2552];
+ struct rio_rev_ctrl rev;
+ struct rio_atmu atmu;
+#ifdef CONFIG_SYS_FSL_RMU
+ u8 res5[8192];
+ struct rio_msg msg[CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM];
+ u8 res6[512];
+ struct rio_dbell dbell;
+ u8 res7[100];
+ struct rio_pw pw;
+#endif
+};
+#endif
/* Quick Engine Block Pin Muxing Registers */
typedef struct par_io {
@@ -2443,6 +2507,7 @@
#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000
#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
+#define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000
#define CONFIG_SYS_FSL_CPC_ADDR \
(CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
@@ -2516,6 +2581,8 @@
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET)
#define CONFIG_SYS_FSL_FM2_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM2_OFFSET)
+#define CONFIG_SYS_FSL_SRIO_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SRIO_OFFSET)
#define CONFIG_SYS_PCI1_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET)
diff --git a/board/gdsys/neo/Makefile b/board/AndesTech/adp-ag102/Makefile
similarity index 81%
rename from board/gdsys/neo/Makefile
rename to board/AndesTech/adp-ag102/Makefile
index dc5b5b8..1cbf2d4 100644
--- a/board/gdsys/neo/Makefile
+++ b/board/AndesTech/adp-ag102/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
+# Copyright (C) 2011 Andes Technology Corporation
+# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -25,15 +25,13 @@
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o
-SOBJS =
+COBJS := adp-ag102.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/board/AndesTech/adp-ag102/adp-ag102.c b/board/AndesTech/adp-ag102/adp-ag102.c
new file mode 100644
index 0000000..5a25632
--- /dev/null
+++ b/board/AndesTech/adp-ag102/adp-ag102.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+
+#include <faraday/ftsdc010.h>
+#ifdef CONFIG_FTSMC020
+#include <faraday/ftsmc020.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscellaneous platform dependent initializations
+ */
+
+int board_init(void)
+{
+ /*
+ * refer to BOOT_PARAMETER_PA_BASE within
+ * "linux/arch/nds32/include/asm/misc_spec.h"
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_ADPAG102;
+ gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+ ftsmc020_init(); /* initialize Flash */
+#endif /* CONFIG_SYS_NO_FLASH */
+ return 0;
+}
+
+int dram_init(void)
+{
+ unsigned long sdram_base = PHYS_SDRAM_0;
+ unsigned long expected_size = PHYS_SDRAM_0_SIZE;
+ unsigned long actual_size;
+
+ actual_size = get_ram_size((void *)sdram_base, expected_size);
+
+ gd->ram_size = actual_size;
+
+ if (expected_size != actual_size) {
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+ }
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+ return ftgmac100_initialize(bd);
+}
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = FLASH_CFI_8BIT;
+ info->chipwidth = FLASH_CFI_BY8;
+ info->interface = FLASH_CFI_X8;
+ return 1;
+ } else {
+ return 0;
+ }
+}
+#endif /* CONFIG_SYS_NO_FLASH */
+
+#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
+void pci_init_board(void)
+{
+ /* should be pci_ftpci100_init() */
+ extern void pci_ftpci_init();
+
+ pci_ftpci_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ ftsdc010_mmc_init(0);
+ return 0;
+}
+#endif
diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c
index 09ef561..c4566dd 100644
--- a/board/freescale/common/p_corenet/law.c
+++ b/board/freescale/common/p_corenet/law.c
@@ -48,6 +48,19 @@
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
#endif
+#ifdef CONFIG_SRIOBOOT_SLAVE
+#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0)
+ SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+ LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
+ SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+ LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
+#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1)
+ SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+ LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
+ SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+ LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
+#endif
+#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c
index 6a0026a..da21627 100644
--- a/board/freescale/common/p_corenet/tlb.c
+++ b/board/freescale/common/p_corenet/tlb.c
@@ -66,6 +66,15 @@
SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+ /*
+ * SRIOBOOT-SLAVE. When slave boot, the address of the
+ * space is at 0xfff00000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_SLAVE_ADDR,
+ CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_1M, 1),
#else
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -138,6 +147,16 @@
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 16, BOOKE_PAGESZ_1M, 1),
#endif
+#ifdef CONFIG_SRIOBOOT_SLAVE
+ /*
+ * SRIOBOOT-SLAVE. 1M space from 0xffe00000 for fetching ucode
+ * and ENV from master
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR,
+ CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+ 0, 17, BOOKE_PAGESZ_1M, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index b1eecc4..a33c936 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -62,10 +62,6 @@
else
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-#ifdef CONFIG_PHYS_64BIT
- puts("36-bit Addressing\n");
-#endif
-
/* Display the RCW, so that no one gets confused as to what RCW
* we're actually using for this boot.
*/
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index c9f85c8..6d0bfde 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -68,12 +68,7 @@
u8 vboot;
u8 *pixis_base = (u8 *)PIXIS_BASE;
- puts("Board: MPC8536DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap) ");
-#endif
-
- printf ("Sys ID: 0x%02x, "
+ printf("Board: MPC8536DS Sys ID: 0x%02x, "
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
in_8(pixis_base + PIXIS_PVER));
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index b20299e..33a02ba 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -45,11 +45,7 @@
u8 vboot;
u8 *pixis_base = (u8 *)PIXIS_BASE;
- puts ("Board: MPC8572DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts ("(36-bit addrmap) ");
-#endif
- printf ("Sys ID: 0x%02x, "
+ printf("Board: MPC8572DS Sys ID: 0x%02x, "
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
in_8(pixis_base + PIXIS_PVER));
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 455569e..6a0a3a2 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -50,9 +50,6 @@
else
puts ("Promjet\n");
-#ifdef CONFIG_PHYS_64BIT
- printf (" 36-bit physical address map\n");
-#endif
return 0;
}
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index e5d8423..36c8545 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -31,7 +31,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_DDR_RAW_TIMING
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
#define CONFIG_SYS_DRAM_SIZE 1024
fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
@@ -165,7 +165,7 @@
return ddr_size;
}
-#else /* CONFIG_DDR_RAW_TIMING */
+#else /* CONFIG_SYS_DDR_RAW_TIMING */
/*
* Samsung K4B2G0846C-HCF8
* The following timing are for "downshift"
@@ -247,4 +247,4 @@
}
}
-#endif /* CONFIG_DDR_RAW_TIMING */
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index b9e66f7..79a6ead 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -165,11 +165,7 @@
struct cpu_type *cpu;
cpu = gd->cpu;
- printf("Board: %sRDB ", cpu->name);
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap)");
-#endif
- puts("\n");
+ printf("Board: %sRDB\n", cpu->name);
return 0;
}
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 456d9b0..aca30f3 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -56,12 +56,8 @@
{
u8 sw;
- puts("Board: P1022DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap) ");
-#endif
-
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ printf("Board: P1022DS Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index 546819c..082976a 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -197,6 +197,12 @@
fdt_fixup_memory(blob, (u64)base, (u64)size);
+ /* By default NOR is on, and NAND is disabled */
+#ifdef CONFIG_NAND_U_BOOT
+ do_fixup_by_path_string(blob, "nor_flash", "status", "disabled");
+ do_fixup_by_path_string(blob, "nand_flash", "status", "okay");
+#endif
+
fdt_fixup_fman_ethernet(blob);
}
#endif
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index cfbae69..437eaf0 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -110,9 +110,7 @@
cpu = gd->cpu;
printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
-#ifdef CONFIG_PHYS_64BIT
- puts ("(36-bit addrmap) \n");
-#endif
+
setbits_be32(&pgpio->gpdir, GPIO_DIR);
/*
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index f0cbde7..88ba56f 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -15,7 +15,7 @@
#include <asm/io.h>
#include <asm/fsl_law.h>
-#ifdef CONFIG_DDR_RAW_TIMING
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
#if defined(CONFIG_P1020RDB_PROTO) || \
defined(CONFIG_P1021RDB) || \
defined(CONFIG_P1020UTM)
@@ -204,7 +204,7 @@
return 0;
}
-#endif /* CONFIG_DDR_RAW_TIMING */
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
/* Fixed sdram init -- doesn't use serial presence detect. */
phys_size_t fixed_sdram(void)
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index a60c5a2..aa39260 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -225,13 +225,7 @@
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u8 in, out, io_config, val;
- printf("Board: %s ", CONFIG_BOARDNAME);
-
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap) ");
-#endif
-
- printf("CPLD: V%d.%d PCBA: V%d.0\n",
+ printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME,
in_8(&cpld_data->cpld_rev_major) & 0x0F,
in_8(&cpld_data->cpld_rev_minor) & 0x0F,
in_8(&cpld_data->pcba_rev) & 0x0F);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index d3af6cf..e8d31a4 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -61,12 +61,8 @@
{
u8 sw;
- puts("Board: P2020DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap) ");
-#endif
-
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ printf("Board: P2020DS Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 1f6a34b..976c8d2 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -54,10 +54,6 @@
sw = CPLD_READ(fbank_sel);
printf("vBank: %d\n", sw & 0x1);
-#ifdef CONFIG_PHYS_64BIT
- puts("36-bit Addressing\n");
-#endif
-
/*
* Display the RCW, so that no one gets confused as to what RCW
* we're actually using for this boot.
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
index c6c74f2..c7cca2a 100644
--- a/board/freescale/p3060qds/p3060qds.c
+++ b/board/freescale/p3060qds/p3060qds.c
@@ -68,9 +68,6 @@
else
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-#ifdef CONFIG_PHYS_64BIT
- puts("36-bit Addressing\n");
-#endif
puts("Reset Configuration Word (RCW):");
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
u32 rcw = in_be32(&gur->rcwsr[i]);
diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
index 8b80533..bc9b7d0 100644
--- a/board/gdsys/405ep/405ep.c
+++ b/board/gdsys/405ep/405ep.c
@@ -28,12 +28,9 @@
#include <asm/ppc4xx-gpio.h>
#include <asm/global_data.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-
#define REFLECTION_TESTPATTERN 0xdede
#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
@@ -55,7 +52,6 @@
int board_early_init_f(void)
{
unsigned k;
- unsigned ctr;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
gd->fpga_state[k] = 0;
@@ -73,26 +69,29 @@
* -> ca. 15 us
*/
mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
+ return 0;
+}
- /*
- * setup io-latches for reset
- */
- out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
- out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+int board_early_init_r(void)
+{
+ unsigned k;
+ unsigned ctr;
- /*
- * set "startup-finished"-gpios
- */
- gpio_write_bit(21, 0);
- gpio_write_bit(22, 1);
+ for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
+ gd->fpga_state[k] = 0;
/*
- * wait for fpga-done
+ * reset FPGA
*/
+ gd405ep_init();
+
+ gd405ep_set_fpga_reset(1);
+
+ gd405ep_setup_hw();
+
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
ctr = 0;
- while (!(in_le16((void *)LATCH2_BASE)
- & CONFIG_SYS_FPGA_DONE(k))) {
+ while (!gd405ep_get_fpga_done(k)) {
udelay(100000);
if (ctr++ > 5) {
gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
@@ -101,15 +100,13 @@
}
}
- /*
- * setup io-latches for boot (stop reset)
- */
udelay(10);
- out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
- out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+
+ gd405ep_set_fpga_reset(0);
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k);
+ struct ihs_fpga *fpga =
+ (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k);
#ifdef CONFIG_SYS_FPGA_NO_RFL_HI
u16 *reflection_target = &fpga->reflection_low;
#else
diff --git a/board/gdsys/405ep/405ep.h b/board/gdsys/405ep/405ep.h
new file mode 100644
index 0000000..5647dbc
--- /dev/null
+++ b/board/gdsys/405ep/405ep.h
@@ -0,0 +1,10 @@
+#ifndef __405EP_H_
+#define __405EP_H_
+
+/* functions to be provided by board implementation */
+void gd405ep_init(void);
+void gd405ep_set_fpga_reset(unsigned state);
+void gd405ep_setup_hw(void);
+int gd405ep_get_fpga_done(unsigned fpga);
+
+#endif /* __405EP_H_ */
diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile
index feb5cec..38e5ea4 100644
--- a/board/gdsys/405ep/Makefile
+++ b/board/gdsys/405ep/Makefile
@@ -25,6 +25,7 @@
LIB = $(obj)lib$(BOARD).o
+COBJS-$(CONFIG_NEO) += neo.o
COBJS-$(CONFIG_IO) += io.o
COBJS-$(CONFIG_IOCON) += iocon.o
COBJS-$(CONFIG_DLVISION_10G) += dlvision-10g.o
diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c
index f55afbd..644493b 100644
--- a/board/gdsys/405ep/dlvision-10g.c
+++ b/board/gdsys/405ep/dlvision-10g.c
@@ -26,16 +26,20 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
+#include <dtt.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
#include "../common/osd.h"
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-#define LATCH2_MC2_PRESENT_N 0x0080
-
#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
+#define LATCH2_MC2_PRESENT_N 0x0080
+
enum {
UNITTYPE_VIDEO_USER = 0,
UNITTYPE_MAIN_USER = 1,
@@ -46,6 +50,8 @@
enum {
HWVER_101 = 0,
HWVER_110 = 1,
+ HWVER_120 = 2,
+ HWVER_130 = 3,
};
enum {
@@ -65,6 +71,14 @@
RAM_DDR2_64 = 2,
};
+int misc_init_r(void)
+{
+ /* startup fans */
+ dtt_init();
+
+ return 0;
+}
+
static unsigned int get_hwver(void)
{
u16 latch3 = in_le16((void *)LATCH3_BASE);
@@ -81,7 +95,7 @@
static void print_fpga_info(unsigned dev)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(dev);
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev);
u16 versions = in_le16(&fpga->versions);
u16 fpga_version = in_le16(&fpga->fpga_version);
u16 fpga_features = in_le16(&fpga->fpga_features);
@@ -146,9 +160,17 @@
break;
case HWVER_110:
- printf(" HW-Ver 1.10\n");
+ printf(" HW-Ver 1.10-1.12\n");
break;
+ case HWVER_120:
+ printf(" HW-Ver 1.20\n");
+ break;
+
+ case HWVER_130:
+ printf(" HW-Ver 1.30\n");
+ break;
+
default:
printf(" HW-Ver %d(not supported)\n",
hardware_version);
@@ -223,32 +245,31 @@
*/
int checkboard(void)
{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
+ char *s = getenv("serial#");
- printf("Board: ");
+ puts("Board: ");
- printf("DLVision 10G");
+ puts("DLVision 10G");
- if (i > 0) {
+ if (s != NULL) {
puts(", serial# ");
- puts(buf);
+ puts(s);
}
puts("\n");
- print_fpga_info(0);
- if (get_mc2_present())
- print_fpga_info(1);
-
return 0;
}
int last_stage_init(void)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
u16 versions = in_le16(&fpga->versions);
+ print_fpga_info(0);
+ if (get_mc2_present())
+ print_fpga_info(1);
+
if (((versions >> 4) & 0x000f) != UNITTYPE_MAIN_USER)
return 0;
@@ -261,3 +282,32 @@
return 0;
}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c
index db1ea7f..070dcbb 100644
--- a/board/gdsys/405ep/io.c
+++ b/board/gdsys/405ep/io.c
@@ -27,10 +27,16 @@
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
+#include <dtt.h>
#include <miiphy.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
#define PHYREG_CONTROL 0
#define PHYREG_PAGE_ADDRESS 22
#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16
@@ -47,6 +53,14 @@
HWVER_122 = 3,
};
+int misc_init_r(void)
+{
+ /* startup fans */
+ dtt_init();
+
+ return 0;
+}
+
int configure_gbit_phy(unsigned char addr)
{
unsigned short value;
@@ -87,9 +101,23 @@
*/
int checkboard(void)
{
+ char *s = getenv("serial#");
+
+ puts("Board: CATCenter Io");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+
+ puts("\n");
+
+ return 0;
+}
+
+static void print_fpga_info(void)
+{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
u16 versions = in_le16(&fpga->versions);
u16 fpga_version = in_le16(&fpga->fpga_version);
u16 fpga_features = in_le16(&fpga->fpga_features);
@@ -103,15 +131,7 @@
feature_channels = fpga_features & 0x007f;
feature_expansion = fpga_features & (1<<15);
- printf("Board: ");
-
- printf("CATCenter Io");
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- puts("\n ");
+ puts("FPGA: ");
switch (unit_type) {
case UNITTYPE_CCD_SWITCH:
@@ -152,8 +172,6 @@
printf(" %d channel(s)", feature_channels);
printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
-
- return 0;
}
/*
@@ -161,9 +179,11 @@
*/
int last_stage_init(void)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
unsigned int k;
+ print_fpga_info();
+
miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
bb_miiphy_read, bb_miiphy_write);
@@ -175,3 +195,32 @@
return 0;
}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c
index ce53340..0fc7db2 100644
--- a/board/gdsys/405ep/iocon.c
+++ b/board/gdsys/405ep/iocon.c
@@ -27,10 +27,15 @@
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
#include "../common/osd.h"
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
enum {
UNITTYPE_MAIN_SERVER = 0,
UNITTYPE_MAIN_USER = 1,
@@ -69,9 +74,25 @@
*/
int checkboard(void)
{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
+ char *s = getenv("serial#");
+
+ puts("Board: ");
+
+ puts("IoCon");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+
+ puts("\n");
+
+ return 0;
+}
+
+static void print_fpga_info(void)
+{
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
u16 versions = in_le16(&fpga->versions);
u16 fpga_version = in_le16(&fpga->fpga_version);
u16 fpga_features = in_le16(&fpga->fpga_features);
@@ -95,16 +116,6 @@
feature_carriers = (fpga_features & 0x000c) >> 2;
feature_video_channels = fpga_features & 0x0003;
- printf("Board: ");
-
- printf("IoCon");
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- puts("\n ");
-
switch (unit_type) {
case UNITTYPE_MAIN_USER:
printf("Mainchannel");
@@ -205,12 +216,12 @@
printf(", %d carrier(s)", feature_carriers);
printf(", %d video channel(s)\n", feature_video_channels);
-
- return 0;
}
int last_stage_init(void)
{
+ print_fpga_info();
+
return osd_probe(0);
}
@@ -231,3 +242,32 @@
{
return in_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x14)) & pin;
}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c
new file mode 100644
index 0000000..d336e55
--- /dev/null
+++ b/board/gdsys/405ep/neo.c
@@ -0,0 +1,161 @@
+/*
+ * (C) Copyright 2011
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+#include <dtt.h>
+
+#include "405ep.h"
+#include <gdsys_fpga.h>
+
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
+enum {
+ UNITTYPE_CCX16 = 1,
+ UNITTYPE_CCIP216 = 2,
+};
+
+enum {
+ HWVER_300 = 3,
+};
+
+int misc_init_r(void)
+{
+ /* startup fans */
+ dtt_init();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: CATCenter Neo");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+
+ puts("\n");
+
+ return 0;
+}
+
+static void print_fpga_info(void)
+{
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
+ u16 versions = in_le16(&fpga->versions);
+ u16 fpga_version = in_le16(&fpga->fpga_version);
+ u16 fpga_features = in_le16(&fpga->fpga_features);
+ int fpga_state = get_fpga_state(0);
+ unsigned unit_type;
+ unsigned hardware_version;
+ unsigned feature_channels;
+
+ puts("FPGA: ");
+ if (fpga_state & FPGA_STATE_DONE_FAILED) {
+ printf(" done timed out\n");
+ return;
+ }
+
+ if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
+ printf(" refelectione test failed\n");
+ return;
+ }
+
+ unit_type = (versions & 0xf000) >> 12;
+ hardware_version = versions & 0x000f;
+ feature_channels = fpga_features & 0x007f;
+
+ switch (unit_type) {
+ case UNITTYPE_CCX16:
+ printf("CCX-Switch");
+ break;
+
+ default:
+ printf("UnitType %d(not supported)", unit_type);
+ break;
+ }
+
+ switch (hardware_version) {
+ case HWVER_300:
+ printf(" HW-Ver 3.00-3.12\n");
+ break;
+
+ default:
+ printf(" HW-Ver %d(not supported)\n",
+ hardware_version);
+ break;
+ }
+
+ printf(" FPGA V %d.%02d, features:",
+ fpga_version / 100, fpga_version % 100);
+
+ printf(" %d channel(s)\n", feature_channels);
+}
+
+int last_stage_init(void)
+{
+ print_fpga_info();
+
+ return 0;
+}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ /*
+ * Neo hardware has no FPGA-DONE GPIO
+ */
+ return 1;
+}
diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c
index 0d25214..5766c0f 100644
--- a/board/gdsys/405ex/405ex.c
+++ b/board/gdsys/405ex/405ex.c
@@ -219,7 +219,8 @@
gd405ex_set_fpga_reset(0);
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k);
+ struct ihs_fpga *fpga =
+ (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k);
#ifdef CONFIG_SYS_FPGA_NO_RFL_HI
u16 *reflection_target = &fpga->reflection_low;
#else
diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c
index 177141d..41fdef7 100644
--- a/board/gdsys/405ex/io64.c
+++ b/board/gdsys/405ex/io64.c
@@ -100,7 +100,7 @@
static void print_fpga_info(unsigned dev)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(dev);
+ struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev);
u16 versions = in_le16(&fpga->versions);
u16 fpga_version = in_le16(&fpga->fpga_version);
u16 fpga_features = in_le16(&fpga->fpga_features);
@@ -242,8 +242,8 @@
{
unsigned int k;
unsigned int fpga;
- ihs_fpga_t *fpga0 = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
- ihs_fpga_t *fpga1 = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(1);
+ struct ihs_fpga *fpga0 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
+ struct ihs_fpga *fpga1 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(1);
int failed = 0;
char str_phys[] = "Setup PHYs -";
char str_serdes[] = "Start SERDES blocks";
diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c
index 5065f9d..a192c98 100644
--- a/board/gdsys/common/osd.c
+++ b/board/gdsys/common/osd.c
@@ -70,8 +70,8 @@
#if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178)
static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen);
- ihs_i2c_t *i2c = &fpga->i2c;
+ struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen);
+ struct ihs_i2c *i2c = &fpga->i2c;
while (in_le16(&fpga->extended_interrupt) & (1 << 12))
;
@@ -81,8 +81,8 @@
static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen);
- ihs_i2c_t *i2c = &fpga->i2c;
+ struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen);
+ struct ihs_i2c *i2c = &fpga->i2c;
unsigned int ctr = 0;
while (in_le16(&fpga->extended_interrupt) & (1 << 12))
@@ -129,7 +129,7 @@
static void mpc92469ac_set(unsigned screen, unsigned int fout)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen);
+ struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen);
unsigned int n;
unsigned int m;
unsigned int bitval = 0;
@@ -265,8 +265,8 @@
static int osd_write_videomem(unsigned screen, unsigned offset,
u16 *data, size_t charcount)
{
- ihs_fpga_t *fpga =
- (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen);
+ struct ihs_fpga *fpga =
+ (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(screen);
unsigned int k;
for (k = 0; k < charcount; ++k) {
@@ -318,8 +318,8 @@
int osd_probe(unsigned screen)
{
- ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen);
- ihs_osd_t *osd = &fpga->osd;
+ struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen);
+ struct ihs_osd *osd = &fpga->osd;
u16 version = in_le16(&osd->version);
u16 features = in_le16(&osd->features);
unsigned width;
diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c
deleted file mode 100644
index d21d599..0000000
--- a/board/gdsys/neo/neo.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#define HWTYPE_CCX16 1
-#define HWREV_300 3
-
-int board_early_init_f(void)
-{
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0ER, 0x00000000); /* disable all ints */
- mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
- mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
- mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
- mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
- /*
- * EBC Configuration Register: set ready timeout to 512 ebc-clks
- * -> ca. 15 us
- */
- mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
-
- return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
- u16 val = in_le16((void *)CONFIG_FPGA_BASE + 2);
- u8 unit_type;
- u8 hardware_cpu_ports;
- u8 hardware_con_ports;
- u8 hardware_version;
-
- printf("Board: CATCenter Neo");
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- puts("\n ");
-
- unit_type = (val & 0xf000) >> 12;
- hardware_cpu_ports = ((val & 0x0f00) >> 8) * 8;
- hardware_con_ports = ((val & 0x00f0) >> 4) * 2;
- hardware_version = val & 0x000f;
-
- switch (unit_type) {
- case HWTYPE_CCX16:
- printf("CCX16-FPGA (80 UARTs)");
- break;
-
- default:
- printf("UnitType %d, unsupported", unit_type);
- break;
- }
-
- printf(", %d cpu ports, %d console ports,",
- hardware_cpu_ports, hardware_con_ports);
-
- switch (hardware_version) {
- case HWREV_300:
- printf(" HW-Ver 3.00\n");
- break;
-
- default:
- printf(" HW-Ver %d, unsupported\n",
- hardware_version);
- break;
- }
-
- return 0;
-}
diff --git a/boards.cfg b/boards.cfg
index 3cf75c3..5f328b5 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -370,6 +370,7 @@
qi_lb60 mips xburst qi_lb60 qi
adp-ag101 nds32 n1213 adp-ag101 AndesTech ag101
adp-ag101p nds32 n1213 adp-ag101p AndesTech ag101
+adp-ag102 nds32 n1213 adp-ag102 AndesTech ag102
nios2-generic nios2 nios2 nios2-generic altera
PCI5441 nios2 nios2 pci5441 psyent
PK1C20 nios2 nios2 pk1c20 psyent
@@ -742,6 +743,7 @@
P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD
P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH
P2041RDB powerpc mpc85xx p2041rdb freescale
+P2041RDB_NAND powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
P2041RDB_SDCARD powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P2041RDB_SECURE_BOOT powerpc mpc85xx p2041rdb freescale - P2041RDB:SECURE_BOOT
P2041RDB_SPIFLASH powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
@@ -750,6 +752,8 @@
P3041DS_SDCARD powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P3041DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P3041DS:SECURE_BOOT
P3041DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+P3041DS_SRIOBOOT_MASTER powerpc mpc85xx corenet_ds freescale - P3041DS:SRIOBOOT_MASTER
+P3041DS_SRIOBOOT_SLAVE powerpc mpc85xx corenet_ds freescale - P3041DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
P3060QDS powerpc mpc85xx p3060qds freescale
P3060QDS_NAND powerpc mpc85xx p3060qds freescale - P3060QDS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
P3060QDS_SECURE_BOOT powerpc mpc85xx p3060qds freescale - P3060QDS:SECURE_BOOT
@@ -757,11 +761,15 @@
P4080DS_SDCARD powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P4080DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P4080DS:SECURE_BOOT
P4080DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+P4080DS_SRIOBOOT_MASTER powerpc mpc85xx corenet_ds freescale - P4080DS:SRIOBOOT_MASTER
+P4080DS_SRIOBOOT_SLAVE powerpc mpc85xx corenet_ds freescale - P4080DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
P5020DS powerpc mpc85xx corenet_ds freescale
P5020DS_NAND powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
P5020DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P5020DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SECURE_BOOT
P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+P5020DS_SRIOBOOT_MASTER powerpc mpc85xx corenet_ds freescale - P5020DS:SRIOBOOT_MASTER
+P5020DS_SRIOBOOT_SLAVE powerpc mpc85xx corenet_ds freescale - P5020DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
stxgp3 powerpc mpc85xx stxgp3 stx
stxssa powerpc mpc85xx stxssa stx - stxssa
stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
@@ -982,7 +990,7 @@
io powerpc ppc4xx 405ep gdsys
io64 powerpc ppc4xx 405ex gdsys
iocon powerpc ppc4xx 405ep gdsys
-neo powerpc ppc4xx - gdsys
+neo powerpc ppc4xx 405ep gdsys
icon powerpc ppc4xx - mosaixtech
MIP405 powerpc ppc4xx mip405 mpl
MIP405T powerpc ppc4xx mip405 mpl - MIP405:MIP405T
diff --git a/common/Makefile b/common/Makefile
index d9f10f3..6e23baa 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -59,6 +59,7 @@
COBJS-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o
COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o
COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
+COBJS-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
# command
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 5359a47..3ab285b 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -119,6 +119,14 @@
print_mhz("pevfreq", bd->bi_pevfreq);
#endif
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+#ifdef CONFIG_PHYS_64BIT
+ puts("addressing = 36-bit\n");
+#else
+ puts("addressing = 32-bit\n");
+#endif
+#endif
+
print_eth(0);
#if defined(CONFIG_HAS_ETH1)
print_eth(1);
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index b1494dc..e1ccdd8 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -66,9 +66,10 @@
!defined(CONFIG_ENV_IS_IN_NVRAM) && \
!defined(CONFIG_ENV_IS_IN_ONENAND) && \
!defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
+ !defined(CONFIG_ENV_IS_IN_REMOTE) && \
!defined(CONFIG_ENV_IS_NOWHERE)
# error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\
-SPI_FLASH|MG_DISK|NVRAM|MMC|FAT} or CONFIG_ENV_IS_NOWHERE
+SPI_FLASH|MG_DISK|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE
#endif
#define XMK_STR(x) #x
diff --git a/common/env_remote.c b/common/env_remote.c
new file mode 100644
index 0000000..3bf0f95
--- /dev/null
+++ b/common/env_remote.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <command.h>
+#include <environment.h>
+#include <linux/stddef.h>
+
+char *env_name_spec = "Remote";
+
+#ifdef ENV_IS_EMBEDDED
+env_t *env_ptr = &environment;
+#else /* ! ENV_IS_EMBEDDED */
+env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR;
+#endif /* ENV_IS_EMBEDDED */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET 0
+#endif
+
+uchar env_get_char_spec(int index)
+{
+ return *((uchar *)(gd->env_addr + index));
+}
+
+int env_init(void)
+{
+ if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) {
+ gd->env_addr = (ulong)&(env_ptr->data);
+ gd->env_valid = 1;
+ return 0;
+ }
+
+ gd->env_addr = (ulong)default_environment;
+ gd->env_valid = 0;
+ return 0;
+}
+
+#ifdef CONFIG_CMD_SAVEENV
+int saveenv(void)
+{
+#ifdef CONFIG_SRIOBOOT_SLAVE
+ printf("Can not support the 'saveenv' when boot from SRIO!\n");
+ return 1;
+#else
+ return 0;
+#endif
+}
+#endif /* CONFIG_CMD_SAVEENV */
+
+void env_relocate_spec(void)
+{
+#ifndef ENV_IS_EMBEDDED
+ env_import((char *)env_ptr, 1);
+#endif
+}
diff --git a/common/image.c b/common/image.c
index 342b315..91954ac 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1829,7 +1829,7 @@
* addr and conf_name are set accordingly
* 0 otherwise
*/
-inline int fit_parse_conf(const char *spec, ulong addr_curr,
+int fit_parse_conf(const char *spec, ulong addr_curr,
ulong *addr, const char **conf_name)
{
return fit_parse_spec(spec, '#', addr_curr, addr, conf_name);
@@ -1855,7 +1855,7 @@
* addr and image_name are set accordingly
* 0 otherwise
*/
-inline int fit_parse_subimage(const char *spec, ulong addr_curr,
+int fit_parse_subimage(const char *spec, ulong addr_curr,
ulong *addr, const char **image_name)
{
return fit_parse_spec(spec, ':', addr_curr, addr, image_name);
diff --git a/doc/README.ag102 b/doc/README.ag102
new file mode 100644
index 0000000..7d142a7
--- /dev/null
+++ b/doc/README.ag102
@@ -0,0 +1,36 @@
+Andes Technology SoC AG102
+==========================
+
+AG102 is the second SoC produced by Andes Technology using N1213 CPU core
+with FPU and DDR contoller support.
+AG102 has integrated both AHB and APB bus and many periphals for application
+and product development.
+
+ADP-AG102
+=========
+
+ADP-AG102 is the SoC with AG102 hardcore CPU.
+
+Configurations
+==============
+
+CONFIG_MEM_REMAP:
+ Doing memory remap is essential for preparing some non-OS or RTOS
+ applications.
+
+CONFIG_SKIP_LOWLEVEL_INIT:
+ If you want to boot this system from SPI ROM and bypass e-bios (the
+ other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
+ in "include/configs/adp-ag102.h".
+
+Build and boot steps
+====================
+
+build:
+1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
+2. Use `make adp-ag102` in u-boot root to build the image.
+
+Burn u-boot to SPI ROM:
+====================
+
+This section will be added later.
diff --git a/doc/README.srio-boot-corenet b/doc/README.srio-boot-corenet
new file mode 100644
index 0000000..56b094c
--- /dev/null
+++ b/doc/README.srio-boot-corenet
@@ -0,0 +1,103 @@
+------------------------------
+SRIO Boot on Corenet Platforms
+------------------------------
+
+For some PowerPC processors with SRIO interface, boot location can be configured
+to SRIO by RCW. The processor booting from SRIO can do without flash for u-boot
+image, ucode and ENV. All the images can be fetched from another processor's
+memory space by SRIO link connected between them.
+
+This document describes the processes based on an example implemented on P4080DS
+platforms and a RCW example with boot from SRIO configuration.
+
+Environment of the SRIO boot:
+ a) Master and slave can be SOCs in one board or SOCs in separate boards.
+ b) They are connected with SRIO links, whether 1x or 4x, and directly or
+ through switch system.
+ c) Only Master has NorFlash for booting, and all the Master's and Slave's
+ U-Boot images, UCodes will be stored in this flash.
+ d) Slave has its own EEPROM for RCW and PBI.
+ e) Slave's RCW should configure the SerDes for SRIO boot port, set the boot
+ location to SRIO, and holdoff all the cores if needed.
+
+ ---------- ----------- -----------
+ | | | | | |
+ | | | | | |
+ | NorFlash|<----->| Master | SRIO | Slave |<---->[EEPROM]
+ | | | |<===========>| |
+ | | | | | |
+ ---------- ----------- -----------
+
+The example based on P4080DS platform:
+ Two P4080DS platforms can be used to implement the boot from SRIO. Their SRIO
+ ports 0 will be connected directly and will be used for the boot from SRIO.
+
+ 1. Slave's RCW example for boot from SRIO port 0 and core 0 not in holdoff.
+ 00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000
+ 00000010: 1818 1818 0000 8888 7440 4000 0000 2000
+ 00000020: f400 0000 0100 0000 0000 0000 0000 0000
+ 00000030: 0000 0000 0083 0000 0000 0000 0000 0000
+ 00000040: 0000 0000 0000 0000 0813 8040 698b 93fe
+
+ 2. Slave's RCW example for boot from SRIO port 0 and all cores in holdoff.
+ 00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000
+ 00000010: 1818 1818 0000 8888 7440 4000 0000 2000
+ 00000020: f440 0000 0100 0000 0000 0000 0000 0000
+ 00000030: 0000 0000 0083 0000 0000 0000 0000 0000
+ 00000040: 0000 0000 0000 0000 0813 8040 063c 778f
+
+ 3. Sequence in Step by Step.
+ a) Update RCW for slave with boot from SRIO port 0 configuration.
+ b) Program slave's U-Boot image, UCode, and ENV parameters into master's
+ NorFlash.
+ c) Start up master and it will boot up normally from its NorFlash.
+ Then, it will finish necessary configurations for slave's boot from
+ SRIO port 0.
+ d) Master will set inbound SRIO windows covered slave's U-Boot image stored
+ in master's NorFlash.
+ e) Master will set an inbound SRIO window covered slave's UCode stored in
+ master's NorFlash.
+ f) Master will set an inbound SRIO window covered slave's ENV stored in
+ master's NorFlash.
+ g) If need to release slave's core, master will set outbound SRIO windows
+ in order to configure slave's registers for the core's releasing.
+ h) If all cores of slave in holdoff, slave should be powered on before all
+ the above master's steps, and wait to be released by master. If not all
+ cores in holdoff, that means core 0 will start up normally, slave should
+ be powered on after all the above master's steps. In the startup phase
+ of the slave from SRIO, it will finish some necessary configurations.
+ i) Slave will set a specific TLB entry for the boot process.
+ j) Slave will set a LAW entry with the TargetID SRIO port 0 for the boot.
+ k) Slave will set a specific TLB entry in order to fetch UCode and ENV
+ from master.
+ l) Slave will set a LAW entry with the TargetID SRIO port 0 for UCode and ENV.
+
+How to use this feature:
+ To use this feature, you need to focus three points.
+
+ 1. Slave's RCW with SRIO boot configurations, and all cores in holdoff
+ configurations if needed.
+ Please refer to the examples given above.
+
+ 2. U-Boot image's compilation.
+ For master, U-Boot image should be generated specifically by
+
+ make xxxx_SRIOBOOT_MASTER_config.
+
+ For example, master U-Boot image used on P4080DS should be compiled with
+
+ make P4080DS_SRIOBOOT_MASTER_config.
+
+ For slave, U-Boot image should be generated specifically by
+
+ make xxxx_SRIOBOOT_SLAVE_config.
+
+ For example, slave U-Boot image used on P4080DS should be compiled with
+
+ make P4080DS_SRIOBOOT_SLAVE_config.
+
+ 3. Necessary modifications based on a specific environment.
+ For a specific environment, the SRIO port for boot, the addresses of the
+ slave's U-Boot image, UCode, ENV stored in master's NorFlash, and any other
+ configurations can be modified in the file:
+ include/configs/corenet_ds.h.
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index f86e46c..5dbdbe3 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -27,6 +27,7 @@
COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
+COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
@@ -40,11 +41,11 @@
COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
-COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o
COBJS-$(CONFIG_TEGRA_I2C) += tegra_i2c.o
COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
COBJS-$(CONFIG_SH_I2C) += sh_i2c.o
+COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/i2c/spr_i2c.c b/drivers/i2c/designware_i2c.c
similarity index 94%
rename from drivers/i2c/spr_i2c.c
rename to drivers/i2c/designware_i2c.c
index eabfe84..6d118ac 100644
--- a/drivers/i2c/spr_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/spr_i2c.h>
+#include "designware_i2c.h"
static struct i2c_regs *const i2c_regs_p =
(struct i2c_regs *)CONFIG_SYS_I2C_BASE;
@@ -40,6 +40,13 @@
unsigned int cntl;
unsigned int hcnt, lcnt;
unsigned int high, low;
+ unsigned int enbl;
+
+ /* to set speed cltr must be disabled */
+ enbl = readl(&i2c_regs_p->ic_enable);
+ enbl &= ~IC_ENABLE_0B;
+ writel(enbl, &i2c_regs_p->ic_enable);
+
cntl = (readl(&i2c_regs_p->ic_con) & (~IC_CON_SPD_MSK));
@@ -71,6 +78,10 @@
lcnt = (IC_CLK * low) / NANO_TO_MICRO;
writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt);
+
+ /* re-enable i2c ctrl back now that speed is set */
+ enbl |= IC_ENABLE_0B;
+ writel(enbl, &i2c_regs_p->ic_enable);
}
/*
@@ -113,7 +124,7 @@
/*
* i2c_init - Init function
* @speed: required i2c speed
- * @slaveadd: slave address for the spear device
+ * @slaveadd: slave address for the device
*
* Initialization function.
*/
diff --git a/arch/arm/include/asm/arch-spear/spr_i2c.h b/drivers/i2c/designware_i2c.h
similarity index 97%
rename from arch/arm/include/asm/arch-spear/spr_i2c.h
rename to drivers/i2c/designware_i2c.h
index 7521ebc..03b520e 100644
--- a/arch/arm/include/asm/arch-spear/spr_i2c.h
+++ b/drivers/i2c/designware_i2c.h
@@ -21,8 +21,8 @@
* MA 02111-1307 USA
*/
-#ifndef __SPR_I2C_H_
-#define __SPR_I2C_H_
+#ifndef __DW_I2C_H_
+#define __DW_I2C_H_
struct i2c_regs {
u32 ic_con;
@@ -143,4 +143,4 @@
#define I2C_FAST_SPEED 400000
#define I2C_STANDARD_SPEED 100000
-#endif /* __SPR_I2C_H_ */
+#endif /* __DW_I2C_H_ */
diff --git a/drivers/i2c/sh_sh7734_i2c.c b/drivers/i2c/sh_sh7734_i2c.c
new file mode 100644
index 0000000..9da173d
--- /dev/null
+++ b/drivers/i2c/sh_sh7734_i2c.c
@@ -0,0 +1,387 @@
+/*
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+
+struct sh_i2c {
+ u8 iccr1;
+ u8 iccr2;
+ u8 icmr;
+ u8 icier;
+ u8 icsr;
+ u8 sar;
+ u8 icdrt;
+ u8 icdrr;
+ u8 nf2cyc;
+ u8 __pad0;
+ u8 __pad1;
+};
+
+static struct sh_i2c *base;
+static u8 iccr1_cks, nf2cyc;
+
+/* ICCR1 */
+#define SH_I2C_ICCR1_ICE (1 << 7)
+#define SH_I2C_ICCR1_RCVD (1 << 6)
+#define SH_I2C_ICCR1_MST (1 << 5)
+#define SH_I2C_ICCR1_TRS (1 << 4)
+#define SH_I2C_ICCR1_MTRS \
+ (SH_I2C_ICCR1_MST | SH_I2C_ICCR1_TRS)
+
+/* ICCR1 */
+#define SH_I2C_ICCR2_BBSY (1 << 7)
+#define SH_I2C_ICCR2_SCP (1 << 6)
+#define SH_I2C_ICCR2_SDAO (1 << 5)
+#define SH_I2C_ICCR2_SDAOP (1 << 4)
+#define SH_I2C_ICCR2_SCLO (1 << 3)
+#define SH_I2C_ICCR2_IICRST (1 << 1)
+
+#define SH_I2C_ICIER_TIE (1 << 7)
+#define SH_I2C_ICIER_TEIE (1 << 6)
+#define SH_I2C_ICIER_RIE (1 << 5)
+#define SH_I2C_ICIER_NAKIE (1 << 4)
+#define SH_I2C_ICIER_STIE (1 << 3)
+#define SH_I2C_ICIER_ACKE (1 << 2)
+#define SH_I2C_ICIER_ACKBR (1 << 1)
+#define SH_I2C_ICIER_ACKBT (1 << 0)
+
+#define SH_I2C_ICSR_TDRE (1 << 7)
+#define SH_I2C_ICSR_TEND (1 << 6)
+#define SH_I2C_ICSR_RDRF (1 << 5)
+#define SH_I2C_ICSR_NACKF (1 << 4)
+#define SH_I2C_ICSR_STOP (1 << 3)
+#define SH_I2C_ICSR_ALOVE (1 << 2)
+#define SH_I2C_ICSR_AAS (1 << 1)
+#define SH_I2C_ICSR_ADZ (1 << 0)
+
+#define IRQ_WAIT 1000
+
+static void sh_i2c_send_stop(struct sh_i2c *base)
+{
+ clrbits_8(&base->iccr2, SH_I2C_ICCR2_BBSY | SH_I2C_ICCR2_SCP);
+}
+
+static int check_icsr_bits(struct sh_i2c *base, u8 bits)
+{
+ int i;
+
+ for (i = 0; i < IRQ_WAIT; i++) {
+ if (bits & readb(&base->icsr))
+ return 0;
+ udelay(10);
+ }
+
+ return 1;
+}
+
+static int check_stop(struct sh_i2c *base)
+{
+ int ret = check_icsr_bits(base, SH_I2C_ICSR_STOP);
+ clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
+
+ return ret;
+}
+
+static int check_tend(struct sh_i2c *base, int stop)
+{
+ int ret = check_icsr_bits(base, SH_I2C_ICSR_TEND);
+
+ if (stop) {
+ clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
+ sh_i2c_send_stop(base);
+ }
+
+ clrbits_8(&base->icsr, SH_I2C_ICSR_TEND);
+ return ret;
+}
+
+static int check_tdre(struct sh_i2c *base)
+{
+ return check_icsr_bits(base, SH_I2C_ICSR_TDRE);
+}
+
+static int check_rdrf(struct sh_i2c *base)
+{
+ return check_icsr_bits(base, SH_I2C_ICSR_RDRF);
+}
+
+static int check_bbsy(struct sh_i2c *base)
+{
+ int i;
+
+ for (i = 0 ; i < IRQ_WAIT ; i++) {
+ if (!(SH_I2C_ICCR2_BBSY & readb(&base->iccr2)))
+ return 0;
+ udelay(10);
+ }
+ return 1;
+}
+
+static int check_ackbr(struct sh_i2c *base)
+{
+ int i;
+
+ for (i = 0 ; i < IRQ_WAIT ; i++) {
+ if (!(SH_I2C_ICIER_ACKBR & readb(&base->icier)))
+ return 0;
+ udelay(10);
+ }
+
+ return 1;
+}
+
+static void sh_i2c_reset(struct sh_i2c *base)
+{
+ setbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST);
+
+ udelay(100);
+
+ clrbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST);
+}
+
+static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg)
+{
+ if (check_bbsy(base)) {
+ puts("i2c bus busy\n");
+ goto fail;
+ }
+
+ setbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
+ clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY);
+
+ writeb((id << 1), &base->icdrt);
+
+ if (check_tend(base, 0)) {
+ puts("TEND check fail...\n");
+ goto fail;
+ }
+
+ if (check_ackbr(base)) {
+ check_tend(base, 0);
+ sh_i2c_send_stop(base);
+ goto fail;
+ }
+
+ writeb(reg, &base->icdrt);
+
+ if (check_tdre(base)) {
+ puts("TDRE check fail...\n");
+ goto fail;
+ }
+
+ if (check_tend(base, 0)) {
+ puts("TEND check fail...\n");
+ goto fail;
+ }
+
+ return 0;
+fail:
+
+ return 1;
+}
+
+static int
+i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 *val, int size)
+{
+ int i;
+
+ if (i2c_set_addr(base, id, reg)) {
+ puts("Fail set slave address\n");
+ return 1;
+ }
+
+ for (i = 0; i < size; i++) {
+ writeb(val[i], &base->icdrt);
+ check_tdre(base);
+ }
+
+ check_tend(base, 1);
+ check_stop(base);
+
+ udelay(100);
+
+ clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
+ clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
+ sh_i2c_reset(base);
+
+ return 0;
+}
+
+static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
+{
+ u8 ret = 0;
+
+ if (i2c_set_addr(base, id, reg)) {
+ puts("Fail set slave address\n");
+ goto fail;
+ }
+
+ clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY);
+ writeb((id << 1) | 1, &base->icdrt);
+
+ if (check_tend(base, 0))
+ puts("TDRE check fail...\n");
+
+ clrsetbits_8(&base->iccr1, SH_I2C_ICCR1_TRS, SH_I2C_ICCR1_MST);
+ clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
+ setbits_8(&base->icier, SH_I2C_ICIER_ACKBT);
+ setbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD);
+
+ /* read data (dummy) */
+ ret = readb(&base->icdrr);
+
+ if (check_rdrf(base)) {
+ puts("check RDRF error\n");
+ goto fail;
+ }
+
+ clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
+ udelay(1000);
+
+ sh_i2c_send_stop(base);
+
+ if (check_stop(base)) {
+ puts("check STOP error\n");
+ goto fail;
+ }
+
+ clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
+ clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
+
+ /* data read */
+ ret = readb(&base->icdrr);
+
+fail:
+ clrbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD);
+
+ return ret;
+}
+
+#ifdef CONFIG_I2C_MULTI_BUS
+static unsigned int current_bus;
+
+/**
+ * i2c_set_bus_num - change active I2C bus
+ * @bus: bus index, zero based
+ * @returns: 0 on success, non-0 on failure
+ */
+int i2c_set_bus_num(unsigned int bus)
+{
+ switch (bus) {
+ case 0:
+ base = (void *)CONFIG_SH_I2C_BASE0;
+ break;
+ case 1:
+ base = (void *)CONFIG_SH_I2C_BASE1;
+ break;
+ default:
+ printf("Bad bus: %d\n", bus);
+ return -1;
+ }
+
+ current_bus = bus;
+
+ return 0;
+}
+
+/**
+ * i2c_get_bus_num - returns index of active I2C bus
+ */
+unsigned int i2c_get_bus_num(void)
+{
+ return current_bus;
+}
+#endif
+
+void i2c_init(int speed, int slaveaddr)
+{
+#ifdef CONFIG_I2C_MULTI_BUS
+ current_bus = 0;
+#endif
+ base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0;
+
+ if (speed == 400000)
+ iccr1_cks = 0x07;
+ else
+ iccr1_cks = 0x0F;
+
+ nf2cyc = 1;
+
+ /* Reset */
+ sh_i2c_reset(base);
+
+ /* ICE enable and set clock */
+ writeb(SH_I2C_ICCR1_ICE | iccr1_cks, &base->iccr1);
+ writeb(nf2cyc, &base->nf2cyc);
+}
+
+/*
+ * i2c_read: - Read multiple bytes from an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file)
+ *
+ * @chip: address of the chip which is to be read
+ * @addr: i2c data address within the chip
+ * @alen: length of the i2c data address (1..2 bytes)
+ * @buffer: where to write the data
+ * @len: how much byte do we want to read
+ * @return: 0 in case of success
+ */
+int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
+{
+ int i = 0;
+ for (i = 0; i < len; i++)
+ buffer[i] = i2c_raw_read(base, chip, addr + i);
+
+ return 0;
+}
+
+/*
+ * i2c_write: - Write multiple bytes to an i2c device
+ *
+ * The higher level routines take into account that this function is only
+ * called with len < page length of the device (see configuration file)
+ *
+ * @chip: address of the chip which is to be written
+ * @addr: i2c data address within the chip
+ * @alen: length of the i2c data address (1..2 bytes)
+ * @buffer: where to find the data to be written
+ * @len: how much byte do we want to read
+ * @return: 0 in case of success
+ */
+int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len)
+{
+ return i2c_raw_write(base, chip, addr, buffer, len);
+}
+
+/*
+ * i2c_probe: - Test if a chip answers for a given i2c address
+ *
+ * @chip: address of the chip which is searched for
+ * @return: 0 if a chip was found, -1 otherwhise
+ */
+int i2c_probe(u8 chip)
+{
+ u8 byte;
+ return i2c_read(chip, 0, 0, &byte, 1);
+}
diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c
index 08fc5c1..8d59d46 100644
--- a/drivers/mmc/bfin_sdh.c
+++ b/drivers/mmc/bfin_sdh.c
@@ -256,7 +256,6 @@
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->f_max = get_sclk();
mmc->f_min = mmc->f_max >> 9;
- mmc->block_dev.part_type = PART_TYPE_DOS;
mmc->b_max = 0;
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index 0b8c33f..49c74c2 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -408,6 +408,8 @@
/* flush cache after read */
flush_cache((ulong)addr, cnt * 512);
}
+#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE)
+ void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR;
#endif
/* Upload the Fman microcode if it's present */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index f2d3366..08fc4e8 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -181,7 +181,7 @@
/* DDR Setup */
#define CONFIG_FSL_DDR3
-#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DDR_RAW_TIMING
#define CONFIG_DDR_SPD
#define CONFIG_SYS_SPD_BUS_NUM 1
#define SPD_EEPROM_ADDRESS 0x52
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index da98f8f..fe39d4e 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -96,6 +96,11 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_OFFSET (512 * 1097)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
@@ -186,10 +191,11 @@
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
#endif
-#define CONFIG_SYS_BR0_PRELIM \
+#define CONFIG_SYS_FLASH_BR_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
-#define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
- | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
+#define CONFIG_SYS_FLASH_OR_PRELIM \
+ ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
+ | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
#define CONFIG_FSL_CPLD
#define CPLD_BASE 0xffdf0000 /* CPLD registers */
@@ -221,6 +227,53 @@
#define CONFIG_SYS_RAMBOOT
#endif
+#define CONFIG_NAND_FSL_ELBC
+/* Nand Flash */
+#ifdef CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_BASE 0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
+ | OR_FCM_PGS /* Large Page*/ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR)
+
+#ifdef CONFIG_NAND
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
+#endif
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
+#endif /* CONFIG_NAND_FSL_ELBC */
+
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
new file mode 100644
index 0000000..a4628e4
--- /dev/null
+++ b/include/configs/adp-ag102.h
@@ -0,0 +1,375 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/ag102.h>
+
+/*
+ * CPU and Board Configuration Options
+ */
+#define CONFIG_ADP_AG102
+
+#define CONFIG_USE_INTERRUPT
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_MEM_REMAP
+#endif
+
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x04200000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#endif
+
+/*
+ * Timer
+ */
+
+/*
+ * According to the discussion in u-boot mailing list before,
+ * CONFIG_SYS_HZ at 1000 is mandatory.
+ */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK_FREQ (66000000 * 2)
+#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
+
+/*
+ * Use Externel CLOCK or PCLK
+ */
+#undef CONFIG_FTRTC010_EXTCLK
+
+#ifndef CONFIG_FTRTC010_EXTCLK
+#define CONFIG_FTRTC010_PCLK
+#endif
+
+#ifdef CONFIG_FTRTC010_EXTCLK
+#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
+#else
+#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
+#endif
+
+#define TIMER_LOAD_VAL 0xffffffff
+
+/*
+ * Real Time Clock
+ */
+#define CONFIG_RTC_FTRTC010
+
+/*
+ * Real Time Clock Divider
+ * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
+ */
+#define OSC_5MHZ (5*1000000)
+#define OSC_CLK (2*OSC_5MHZ)
+#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
+
+/*
+ * Serial console configuration
+ */
+
+/* FTUART is a high speed NS 16C550A compatible UART */
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Ethernet
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_FTGMAC100
+#define CONFIG_FTGMAC100_EGIGA
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * SD (MMC) controller
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FTSDC010
+#define CONFIG_FTSDC010_NUMBER 1
+#define CONFIG_FTSDC010_SDIO
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
+/*
+ * PCI
+ */
+#define CONFIG_PCI
+#define CONFIG_FTPCI100
+#define CONFIG_FTPCI100_MEM_BASE 0xa0000000
+#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */
+#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */
+#define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50
+
+#define CONFIG_PCI_MEM_BUS 0xa0000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */
+
+#define CONFIG_PCI_IO_BUS 0x90000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */
+
+/*
+ * USB
+ */
+#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
+#if defined(CONFIG_FTPCI100)
+#define __io /* enable outl & inl */
+#define CONFIG_CMD_USB
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_PCI_EHCI_DEVICE 0
+#define CONFIG_USB_EHCI_PCI
+#define CONFIG_PREBOOT "usb start;"
+#endif /* #if defiend(CONFIG_FTPCI100) */
+#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */
+
+/*
+ * IDE/ATA stuff
+ */
+#define __io
+#define CONFIG_IDE_AHB
+#define CONFIG_IDE_FTIDE020
+
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#define CONFIG_IDE_RESET 1 /* reset for ide supported */
+#define CONFIG_IDE_PREINIT 1 /* preinit for ide */
+
+/* max: 2 IDE busses */
+#define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */
+/* max: 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */
+
+#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000
+
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/*
+ * size in bytes reserved for initial data
+*/
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * AHB Controller configuration
+ */
+#define CONFIG_FTAHBC020S
+
+#ifdef CONFIG_FTAHBC020S
+#include <faraday/ftahbc020s.h>
+
+/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
+#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
+
+/*
+ * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
+ * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
+ * in C language.
+ */
+#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
+ (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
+ FTAHBC020S_SLAVE_BSR_SIZE(0xb))
+#endif
+
+/*
+ * Watchdog
+ */
+#define CONFIG_FTWDT010_WATCHDOG
+
+/*
+ * PCU Power Control Unit configuration
+ */
+#define CONFIG_ANDES_PCU
+
+#ifdef CONFIG_ANDES_PCU
+#include <andestech/andes_pcu.h>
+
+#endif
+
+/*
+ * DDR DRAM controller configuration
+ */
+#define CONFIG_DWCDDR21MCTL
+
+#ifdef CONFIG_DWCDDR21MCTL
+#include <synopsys/dwcddr21mctl.h>
+/* DCR:
+ * 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend
+ * 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk
+ * 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks)
+ * 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank)
+ * 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks)
+ */
+#define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004
+#define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \
+ DWCDDR21MCTL_CCR_DFTLM(0x4) | \
+ DWCDDR21MCTL_CCR_HOSTEN(0x1))
+
+/* 0x04: 0x000020d4 */
+#define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca
+
+/* 0x08: 0x0000000f */
+#define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f
+
+/* 0x10: 0x00034812 */
+#define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \
+ DWCDDR21MCTL_DRR_TRFPRD(0x0348))
+/* 0x24 */
+#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0)
+
+/* 0x4c: 0x00000040 */
+#define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040
+
+/* 0x5c: 0x000055CF */
+#define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf
+
+/* 0xa4: 0x00100000 */
+#define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \
+ DWCDDR21MCTL_DTAR_DTROW(0x0100) | \
+ DWCDDR21MCTL_DTAR_DTCOL(0x0))
+/* 0x1f0: 0x00000852 */
+#define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \
+ DWCDDR21MCTL_MR_CL(0x5) | \
+ DWCDDR21MCTL_MR_BL(0x2))
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
+#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
+#if defined(CONFIG_MEM_REMAP)
+#define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/
+#endif
+#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
+#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
+#endif
+
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
+
+#ifdef CONFIG_MEM_REMAP
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
+ GENERATED_GBL_DATA_SIZE)
+#else
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
+#endif /* CONFIG_MEM_REMAP */
+
+/*
+ * Load address and memory test area should agree with
+ * board/faraday/a320/config.mk
+ * Be careful not to overwrite U-boot itself.
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x0CF00000
+
+/* memtest works on 63 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
+
+/*
+ * Static memory controller configuration
+ */
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 4096
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 77dd0a2..8ed37a5 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -33,6 +33,15 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#endif
+#ifdef CONFIG_SRIOBOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
/* High Level Configuration Options */
#define CONFIG_BOOKE
#define CONFIG_E500 /* BOOKE e500 family */
@@ -68,7 +77,9 @@
#define CONFIG_ENV_OVERWRITE
#ifdef CONFIG_SYS_NO_FLASH
+#ifndef CONFIG_SRIOBOOT_SLAVE
#define CONFIG_ENV_IS_NOWHERE
+#endif
#else
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
@@ -97,6 +108,12 @@
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR 0xffe20000
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
@@ -373,6 +390,54 @@
#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
/*
+ * SRIOBOOT - MASTER
+ */
+#ifdef CONFIG_SRIOBOOT_MASTER
+/* master port for srioboot*/
+#define CONFIG_SRIOBOOT_MASTER_PORT 0
+/* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000 /* 512K */
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull
+#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull
+/*
+ * for slave UCODE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS 0xfef020000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS 0x3ffe00000ull
+#define CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE 0x10000 /* 64K */
+/*
+ * for slave ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull
+#define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull
+#define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000 /* 128K */
+/* slave core release by master*/
+#define CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */
+#endif
+
+/*
+ * SRIOBOOT - SLAVE
+ */
+#ifdef CONFIG_SRIOBOOT_SLAVE
+/* slave port for srioboot */
+#define CONFIG_SRIOBOOT_SLAVE_PORT0
+/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
+#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR)
+#endif
+
+/*
* eSPI - Enhanced SPI
*/
#define CONFIG_FSL_ESPI
@@ -492,6 +557,16 @@
#elif defined(CONFIG_NAND)
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIOBOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO outbound window->master inbound window->master LAW->
+ * the ucode address in master's NOR flash.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000
#else
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 1468197..2cd2027 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -34,10 +34,12 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME dlvsion-10g
-#define CONFIG_IDENT_STRING " dlvision-10g 0.02"
+#define CONFIG_IDENT_STRING " dlvision-10g 0.03"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
@@ -80,6 +82,7 @@
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DTT
#undef CONFIG_CMD_EEPROM
/*
@@ -115,7 +118,7 @@
/* Temp sensor/hwmon/dtt */
#define CONFIG_DTT_LM63 1 /* National LM63 */
-#define CONFIG_DTT_SENSORS { 0x4c, 0x4e } /* Sensor addresses */
+#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */
#define CONFIG_DTT_PWM_LOOKUPTABLE \
{ { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
{ 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h
index 3c59ff4..9efbb8e 100644
--- a/include/configs/gdppc440etx.h
+++ b/include/configs/gdppc440etx.h
@@ -50,6 +50,10 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f*/
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
diff --git a/include/configs/intip.h b/include/configs/intip.h
index 92b65af..33364a8 100644
--- a/include/configs/intip.h
+++ b/include/configs/intip.h
@@ -37,10 +37,10 @@
#define CONFIG_460EX 1 /* Specific PPC460EX */
#ifdef CONFIG_DEVCONCENTER
#define CONFIG_HOSTNAME devconcenter
-#define CONFIG_IDENT_STRING " devconcenter 0.05"
+#define CONFIG_IDENT_STRING " devconcenter 0.06"
#else
#define CONFIG_HOSTNAME intip
-#define CONFIG_IDENT_STRING " intip 0.05"
+#define CONFIG_IDENT_STRING " intip 0.06"
#endif
#define CONFIG_440 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
diff --git a/include/configs/io.h b/include/configs/io.h
index 9d2a87d..03661cc 100644
--- a/include/configs/io.h
+++ b/include/configs/io.h
@@ -34,11 +34,13 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME io
-#define CONFIG_IDENT_STRING " io 0.04"
+#define CONFIG_IDENT_STRING " io 0.05"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
-#define CONFIG_LAST_STAGE_INIT /* call last_stage_init */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
@@ -48,6 +50,10 @@
#define PLLMR0_DEFAULT PLLMR0_266_133_66
#define PLLMR1_DEFAULT PLLMR1_266_133_66
+#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
@@ -76,6 +82,7 @@
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DTT
#undef CONFIG_CMD_EEPROM
/*
diff --git a/include/configs/io64.h b/include/configs/io64.h
index 51b2dd1..887aaef 100644
--- a/include/configs/io64.h
+++ b/include/configs/io64.h
@@ -53,7 +53,7 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME io64
-#define CONFIG_IDENT_STRING " io64 0.01"
+#define CONFIG_IDENT_STRING " io64 0.02"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 9fcc643..7f8825b 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -34,10 +34,11 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME iocon
-#define CONFIG_IDENT_STRING " iocon 0.03"
+#define CONFIG_IDENT_STRING " iocon 0.04"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
@@ -48,6 +49,10 @@
#define PLLMR0_DEFAULT PLLMR0_266_133_66
#define PLLMR1_DEFAULT PLLMR1_266_133_66
+#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
diff --git a/include/configs/neo.h b/include/configs/neo.h
index 8de5aaf..38b5bec 100644
--- a/include/configs/neo.h
+++ b/include/configs/neo.h
@@ -35,9 +35,13 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME neo
+#define CONFIG_IDENT_STRING " neo 0.01"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
@@ -149,53 +153,53 @@
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_ADDR 0xFFF00000
+#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND 0xFFF20000
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#endif
/*
* PPC405 GPIO Configuration
*/
-#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
-{ \
-/* GPIO Core 0 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
-} \
+#define CONFIG_SYS_4xx_GPIO_TABLE { \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
+} \
}
/*
@@ -226,12 +230,22 @@
#define CONFIG_SYS_EBC_PB1CR 0xFB85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */
/* Memory Bank 2 (FPGA) initialization */
-#define CONFIG_FPGA_BASE 0x7f100000
+#define CONFIG_SYS_FPGA0_BASE 0x7f100000
#define CONFIG_SYS_EBC_PB2AP 0x92015480
#define CONFIG_SYS_EBC_PB2CR 0x7f11a000 /* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE
+
+#define CONFIG_SYS_FPGA_COUNT 1
+
/* Memory Bank 3 (Latches) initialization */
+#define CONFIG_SYS_LATCH_BASE 0x7f200000
#define CONFIG_SYS_EBC_PB3AP 0x92015480
#define CONFIG_SYS_EBC_PB3CR 0x7f21a000 /* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_LATCH0_RESET 0xffff
+#define CONFIG_SYS_LATCH0_BOOT 0xffff
+#define CONFIG_SYS_LATCH1_RESET 0xffbf
+#define CONFIG_SYS_LATCH1_BOOT 0xffff
+
#endif /* __CONFIG_H */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 3098c5a..9f2951d 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -184,7 +184,7 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CMD_SATA
-#define CONFIG_SATA_SIL3114
+#define CONFIG_SATA_SIL
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LIBATA
#define CONFIG_LBA48
@@ -227,7 +227,7 @@
/* DDR Setup */
#define CONFIG_FSL_DDR3
-#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DDR_RAW_TIMING
#define CONFIG_DDR_SPD
#define CONFIG_SYS_SPD_BUS_NUM 1
#define SPD_EEPROM_ADDRESS 0x52
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 5fef8cc..a791815 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -41,7 +41,7 @@
/* I2C driver configuration */
#define CONFIG_HARD_I2C
-#define CONFIG_SPEAR_I2C
+#define CONFIG_DW_I2C
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02
diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h
index 949864c..1758d74 100644
--- a/include/gdsys_fpga.h
+++ b/include/gdsys_fpga.h
@@ -35,20 +35,20 @@
int get_fpga_state(unsigned dev);
void print_fpga_state(unsigned dev);
-typedef struct ihs_gpio {
+struct ihs_gpio {
u16 read;
u16 clear;
u16 set;
-} ihs_gpio_t;
+};
-typedef struct ihs_i2c {
+struct ihs_i2c {
u16 write_mailbox;
u16 write_mailbox_ext;
u16 read_mailbox;
u16 read_mailbox_ext;
-} ihs_i2c_t;
+};
-typedef struct ihs_osd {
+struct ihs_osd {
u16 version;
u16 features;
u16 control;
@@ -56,10 +56,21 @@
u16 xy_scale;
u16 x_pos;
u16 y_pos;
-} ihs_osd_t;
+};
+
+#ifdef CONFIG_NEO
+struct ihs_fpga {
+ u16 reflection_low; /* 0x0000 */
+ u16 versions; /* 0x0002 */
+ u16 fpga_features; /* 0x0004 */
+ u16 fpga_version; /* 0x0006 */
+ u16 reserved_0[8187]; /* 0x0008 */
+ u16 reflection_high; /* 0x3ffe */
+};
+#endif
#ifdef CONFIG_IO
-typedef struct ihs_fpga {
+struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
u16 versions; /* 0x0002 */
u16 fpga_features; /* 0x0004 */
@@ -68,11 +79,11 @@
u16 quad_serdes_reset; /* 0x0012 */
u16 reserved_1[8181]; /* 0x0014 */
u16 reflection_high; /* 0x3ffe */
-} ihs_fpga_t;
+};
#endif
#ifdef CONFIG_IO64
-typedef struct ihs_fpga {
+struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
u16 versions; /* 0x0002 */
u16 fpga_features; /* 0x0004 */
@@ -87,30 +98,30 @@
u16 ch0_hicb_config_int;/* 0x0502 */
u16 reserved_3[7549]; /* 0x0504 */
u16 reflection_high; /* 0x3ffe */
-} ihs_fpga_t;
+};
#endif
#ifdef CONFIG_IOCON
-typedef struct ihs_fpga {
+struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
u16 versions; /* 0x0002 */
u16 fpga_version; /* 0x0004 */
u16 fpga_features; /* 0x0006 */
u16 reserved_0[6]; /* 0x0008 */
- ihs_gpio_t gpio; /* 0x0014 */
+ struct ihs_gpio gpio; /* 0x0014 */
u16 mpc3w_control; /* 0x001a */
u16 reserved_1[19]; /* 0x001c */
u16 videocontrol; /* 0x0042 */
u16 reserved_2[93]; /* 0x0044 */
u16 reflection_high; /* 0x00fe */
- ihs_osd_t osd; /* 0x0100 */
- u16 reserved_3[88]; /* 0x010e */
+ struct ihs_osd osd; /* 0x0100 */
+ u16 reserved_3[889]; /* 0x010e */
u16 videomem; /* 0x0800 */
-} ihs_fpga_t;
+};
#endif
#ifdef CONFIG_DLVISION_10G
-typedef struct ihs_fpga {
+struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
u16 versions; /* 0x0002 */
u16 fpga_version; /* 0x0004 */
@@ -118,16 +129,16 @@
u16 reserved_0[10]; /* 0x0008 */
u16 extended_interrupt; /* 0x001c */
u16 reserved_1[9]; /* 0x001e */
- ihs_i2c_t i2c; /* 0x0030 */
+ struct ihs_i2c i2c; /* 0x0030 */
u16 reserved_2[16]; /* 0x0038 */
u16 mpc3w_control; /* 0x0058 */
u16 reserved_3[34]; /* 0x005a */
u16 videocontrol; /* 0x009e */
u16 reserved_4[176]; /* 0x00a0 */
- ihs_osd_t osd; /* 0x0200 */
+ struct ihs_osd osd; /* 0x0200 */
u16 reserved_5[761]; /* 0x020e */
u16 videomem; /* 0x0800 */
-} ihs_fpga_t;
+};
#endif
#endif
diff --git a/include/image.h b/include/image.h
index a1c6e4e..aa9daa2 100644
--- a/include/image.h
+++ b/include/image.h
@@ -531,9 +531,9 @@
#define FIT_MAX_HASH_LEN 20 /* max(crc32_len(4), sha1_len(20)) */
/* cmdline argument format parsing */
-inline int fit_parse_conf(const char *spec, ulong addr_curr,
+int fit_parse_conf(const char *spec, ulong addr_curr,
ulong *addr, const char **conf_name);
-inline int fit_parse_subimage(const char *spec, ulong addr_curr,
+int fit_parse_subimage(const char *spec, ulong addr_curr,
ulong *addr, const char **image_name);
void fit_print_contents(const void *fit);