| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2011 Freescale Semiconductor, Inc. |
| * Copyright 2019 NXP |
| * Author: Tang Yuantian <b29983@freescale.com> |
| */ |
| |
| #include <blk.h> |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <pci.h> |
| #include <command.h> |
| #include <asm/byteorder.h> |
| #include <malloc.h> |
| #include <asm/io.h> |
| #include <fis.h> |
| #include <sata.h> |
| #include <libata.h> |
| #include <sata.h> |
| #include <dm/device-internal.h> |
| #include <linux/delay.h> |
| |
| #include "sata_sil.h" |
| |
| #define virt_to_bus(devno, v) dm_pci_virt_to_mem(devno, (void *) (v)) |
| |
| /* just compatible ahci_ops */ |
| struct sil_ops { |
| int *rev0; |
| int *rev1; |
| int (*scan)(struct udevice *dev); |
| }; |
| |
| static struct sata_info sata_info; |
| |
| static struct pci_device_id supported[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3131) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3132) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3124) }, |
| {} |
| }; |
| |
| static void sil_sata_dump_fis(struct sata_fis_d2h *s) |
| { |
| printf("Status FIS dump:\n"); |
| printf("fis_type: %02x\n", s->fis_type); |
| printf("pm_port_i: %02x\n", s->pm_port_i); |
| printf("status: %02x\n", s->status); |
| printf("error: %02x\n", s->error); |
| printf("lba_low: %02x\n", s->lba_low); |
| printf("lba_mid: %02x\n", s->lba_mid); |
| printf("lba_high: %02x\n", s->lba_high); |
| printf("device: %02x\n", s->device); |
| printf("lba_low_exp: %02x\n", s->lba_low_exp); |
| printf("lba_mid_exp: %02x\n", s->lba_mid_exp); |
| printf("lba_high_exp: %02x\n", s->lba_high_exp); |
| printf("res1: %02x\n", s->res1); |
| printf("sector_count: %02x\n", s->sector_count); |
| printf("sector_count_exp: %02x\n", s->sector_count_exp); |
| } |
| |
| static const char *sata_spd_string(unsigned int speed) |
| { |
| static const char * const spd_str[] = { |
| "1.5 Gbps", |
| "3.0 Gbps", |
| "6.0 Gbps", |
| }; |
| |
| if ((speed - 1) > 2) |
| return "<unknown>"; |
| |
| return spd_str[speed - 1]; |
| } |
| |
| static u32 ata_wait_register(void *reg, u32 mask, |
| u32 val, int timeout_msec) |
| { |
| u32 tmp; |
| |
| tmp = readl(reg); |
| while ((tmp & mask) == val && timeout_msec > 0) { |
| mdelay(1); |
| timeout_msec--; |
| tmp = readl(reg); |
| } |
| |
| return tmp; |
| } |
| |
| static void sil_config_port(void *port) |
| { |
| /* configure IRQ WoC */ |
| writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); |
| |
| /* zero error counters. */ |
| writew(0x8000, port + PORT_DECODE_ERR_THRESH); |
| writew(0x8000, port + PORT_CRC_ERR_THRESH); |
| writew(0x8000, port + PORT_HSHK_ERR_THRESH); |
| writew(0x0000, port + PORT_DECODE_ERR_CNT); |
| writew(0x0000, port + PORT_CRC_ERR_CNT); |
| writew(0x0000, port + PORT_HSHK_ERR_CNT); |
| |
| /* always use 64bit activation */ |
| writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); |
| |
| /* clear port multiplier enable and resume bits */ |
| writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); |
| } |
| |
| static int sil_init_port(void *port) |
| { |
| u32 tmp; |
| |
| writel(PORT_CS_INIT, port + PORT_CTRL_STAT); |
| ata_wait_register(port + PORT_CTRL_STAT, |
| PORT_CS_INIT, PORT_CS_INIT, 100); |
| tmp = ata_wait_register(port + PORT_CTRL_STAT, |
| PORT_CS_RDY, 0, 100); |
| |
| if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void sil_read_fis(struct sil_sata *sata, int tag, |
| struct sata_fis_d2h *fis) |
| { |
| void *port = sata->port; |
| struct sil_prb *prb; |
| int i; |
| u32 *src, *dst; |
| |
| prb = port + PORT_LRAM + tag * PORT_LRAM_SLOT_SZ; |
| src = (u32 *)&prb->fis; |
| dst = (u32 *)fis; |
| for (i = 0; i < sizeof(struct sata_fis_h2d); i += 4) |
| *dst++ = readl(src++); |
| } |
| |
| static int sil_exec_cmd(struct sil_sata *sata, struct sil_cmd_block *pcmd, |
| int tag) |
| { |
| void *port = sata->port; |
| u64 paddr = virt_to_bus(sata->devno, pcmd); |
| u32 irq_mask, irq_stat; |
| int rc; |
| |
| writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); |
| |
| /* better to add momery barrior here */ |
| writel((u32)paddr, port + PORT_CMD_ACTIVATE + tag * 8); |
| writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + tag * 8 + 4); |
| |
| irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; |
| irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, |
| 0, 10000); |
| |
| /* clear IRQs */ |
| writel(irq_mask, port + PORT_IRQ_STAT); |
| irq_stat >>= PORT_IRQ_RAW_SHIFT; |
| |
| if (irq_stat & PORT_IRQ_COMPLETE) |
| rc = 0; |
| else { |
| /* force port into known state */ |
| sil_init_port(port); |
| if (irq_stat & PORT_IRQ_ERROR) |
| rc = 1; /* error */ |
| else |
| rc = 2; /* busy */ |
| } |
| |
| return rc; |
| } |
| |
| static int sil_cmd_set_feature(struct sil_sata *sata) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| struct sata_fis_d2h fis; |
| u8 udma_cap; |
| int ret; |
| |
| memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = (1 << 7); |
| pcmd->prb.fis.command = ATA_CMD_SET_FEATURES; |
| pcmd->prb.fis.features = SETFEATURES_XFER; |
| |
| /* First check the device capablity */ |
| udma_cap = (u8)(sata->udma & 0xff); |
| debug("udma_cap %02x\n", udma_cap); |
| |
| if (udma_cap == ATA_UDMA6) |
| pcmd->prb.fis.sector_count = XFER_UDMA_6; |
| if (udma_cap == ATA_UDMA5) |
| pcmd->prb.fis.sector_count = XFER_UDMA_5; |
| if (udma_cap == ATA_UDMA4) |
| pcmd->prb.fis.sector_count = XFER_UDMA_4; |
| if (udma_cap == ATA_UDMA3) |
| pcmd->prb.fis.sector_count = XFER_UDMA_3; |
| |
| ret = sil_exec_cmd(sata, pcmd, 0); |
| if (ret) { |
| sil_read_fis(sata, 0, &fis); |
| printf("Err: exe cmd(0x%x).\n", |
| readl(sata->port + PORT_SERROR)); |
| sil_sata_dump_fis(&fis); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void sil_sata_init_wcache(struct sil_sata *sata, u16 *id) |
| { |
| if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id)) |
| sata->wcache = 1; |
| if (ata_id_has_flush(id)) |
| sata->flush = 1; |
| if (ata_id_has_flush_ext(id)) |
| sata->flush_ext = 1; |
| } |
| |
| static void sil_sata_set_feature_by_id(struct sil_sata *sata, u16 *id) |
| { |
| #ifdef CONFIG_LBA48 |
| /* Check if support LBA48 */ |
| if (ata_id_has_lba48(id)) { |
| sata->lba48 = 1; |
| debug("Device supports LBA48\n"); |
| } else { |
| debug("Device supports LBA28\n"); |
| } |
| #endif |
| |
| sil_sata_init_wcache(sata, id); |
| sil_cmd_set_feature(sata); |
| } |
| |
| static int sil_cmd_identify_device(struct sil_sata *sata, u16 *id) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| struct sata_fis_d2h fis; |
| int ret; |
| |
| memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); |
| pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); |
| pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = (1 << 7); |
| pcmd->prb.fis.command = ATA_CMD_ID_ATA; |
| pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, id)); |
| pcmd->sge.cnt = cpu_to_le32(sizeof(id[0]) * ATA_ID_WORDS); |
| pcmd->sge.flags = cpu_to_le32(SGE_TRM); |
| |
| ret = sil_exec_cmd(sata, pcmd, 0); |
| if (ret) { |
| sil_read_fis(sata, 0, &fis); |
| printf("Err: id cmd(0x%x).\n", readl(sata->port + PORT_SERROR)); |
| sil_sata_dump_fis(&fis); |
| return 1; |
| } |
| ata_swap_buf_le16(id, ATA_ID_WORDS); |
| |
| return 0; |
| } |
| |
| static int sil_cmd_soft_reset(struct sil_sata *sata) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| struct sata_fis_d2h fis; |
| void *port = sata->port; |
| int ret; |
| |
| /* put the port into known state */ |
| if (sil_init_port(port)) { |
| printf("SRST: port %d not ready\n", sata->id); |
| return 1; |
| } |
| |
| memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); |
| |
| pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_SRST); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = 0xf; |
| |
| ret = sil_exec_cmd(sata, &cmdb, 0); |
| if (ret) { |
| sil_read_fis(sata, 0, &fis); |
| printf("SRST cmd error.\n"); |
| sil_sata_dump_fis(&fis); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static ulong sil_sata_rw_cmd(struct sil_sata *sata, ulong start, ulong blkcnt, |
| u8 *buffer, int is_write) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| struct sata_fis_d2h fis; |
| u64 block; |
| int ret; |
| |
| block = (u64)start; |
| memset(pcmd, 0, sizeof(struct sil_cmd_block)); |
| pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = (1 << 7); |
| if (is_write) { |
| pcmd->prb.fis.command = ATA_CMD_WRITE; |
| pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE); |
| } else { |
| pcmd->prb.fis.command = ATA_CMD_READ; |
| pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); |
| } |
| |
| pcmd->prb.fis.device = ATA_LBA; |
| pcmd->prb.fis.device |= (block >> 24) & 0xf; |
| pcmd->prb.fis.lba_high = (block >> 16) & 0xff; |
| pcmd->prb.fis.lba_mid = (block >> 8) & 0xff; |
| pcmd->prb.fis.lba_low = block & 0xff; |
| pcmd->prb.fis.sector_count = (u8)blkcnt & 0xff; |
| |
| pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer)); |
| pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE); |
| pcmd->sge.flags = cpu_to_le32(SGE_TRM); |
| |
| ret = sil_exec_cmd(sata, pcmd, 0); |
| if (ret) { |
| sil_read_fis(sata, 0, &fis); |
| printf("Err: rw cmd(0x%08x).\n", |
| readl(sata->port + PORT_SERROR)); |
| sil_sata_dump_fis(&fis); |
| return 1; |
| } |
| |
| return blkcnt; |
| } |
| |
| static ulong sil_sata_rw_cmd_ext(struct sil_sata *sata, ulong start, |
| ulong blkcnt, u8 *buffer, int is_write) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| struct sata_fis_d2h fis; |
| u64 block; |
| int ret; |
| |
| block = (u64)start; |
| memset(pcmd, 0, sizeof(struct sil_cmd_block)); |
| pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = (1 << 7); |
| if (is_write) { |
| pcmd->prb.fis.command = ATA_CMD_WRITE_EXT; |
| pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE); |
| } else { |
| pcmd->prb.fis.command = ATA_CMD_READ_EXT; |
| pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); |
| } |
| |
| pcmd->prb.fis.lba_high_exp = (block >> 40) & 0xff; |
| pcmd->prb.fis.lba_mid_exp = (block >> 32) & 0xff; |
| pcmd->prb.fis.lba_low_exp = (block >> 24) & 0xff; |
| pcmd->prb.fis.lba_high = (block >> 16) & 0xff; |
| pcmd->prb.fis.lba_mid = (block >> 8) & 0xff; |
| pcmd->prb.fis.lba_low = block & 0xff; |
| pcmd->prb.fis.device = ATA_LBA; |
| pcmd->prb.fis.sector_count_exp = (blkcnt >> 8) & 0xff; |
| pcmd->prb.fis.sector_count = blkcnt & 0xff; |
| |
| pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer)); |
| pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE); |
| pcmd->sge.flags = cpu_to_le32(SGE_TRM); |
| |
| ret = sil_exec_cmd(sata, pcmd, 0); |
| if (ret) { |
| sil_read_fis(sata, 0, &fis); |
| printf("Err: rw ext cmd(0x%08x).\n", |
| readl(sata->port + PORT_SERROR)); |
| sil_sata_dump_fis(&fis); |
| return 1; |
| } |
| |
| return blkcnt; |
| } |
| |
| static ulong sil_sata_rw_lba28(struct sil_sata *sata, ulong blknr, |
| lbaint_t blkcnt, const void *buffer, |
| int is_write) |
| { |
| ulong start, blks, max_blks; |
| u8 *addr; |
| |
| start = blknr; |
| blks = blkcnt; |
| addr = (u8 *)buffer; |
| |
| max_blks = ATA_MAX_SECTORS; |
| do { |
| if (blks > max_blks) { |
| sil_sata_rw_cmd(sata, start, max_blks, addr, is_write); |
| start += max_blks; |
| blks -= max_blks; |
| addr += ATA_SECT_SIZE * max_blks; |
| } else { |
| sil_sata_rw_cmd(sata, start, blks, addr, is_write); |
| start += blks; |
| blks = 0; |
| addr += ATA_SECT_SIZE * blks; |
| } |
| } while (blks != 0); |
| |
| return blkcnt; |
| } |
| |
| static ulong sil_sata_rw_lba48(struct sil_sata *sata, ulong blknr, |
| lbaint_t blkcnt, const void *buffer, |
| int is_write) |
| { |
| ulong start, blks, max_blks; |
| u8 *addr; |
| |
| start = blknr; |
| blks = blkcnt; |
| addr = (u8 *)buffer; |
| |
| max_blks = ATA_MAX_SECTORS_LBA48; |
| do { |
| if (blks > max_blks) { |
| sil_sata_rw_cmd_ext(sata, start, max_blks, |
| addr, is_write); |
| start += max_blks; |
| blks -= max_blks; |
| addr += ATA_SECT_SIZE * max_blks; |
| } else { |
| sil_sata_rw_cmd_ext(sata, start, blks, |
| addr, is_write); |
| start += blks; |
| blks = 0; |
| addr += ATA_SECT_SIZE * blks; |
| } |
| } while (blks != 0); |
| |
| return blkcnt; |
| } |
| |
| static void sil_sata_cmd_flush_cache(struct sil_sata *sata) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| |
| memset((void *)pcmd, 0, sizeof(struct sil_cmd_block)); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = (1 << 7); |
| pcmd->prb.fis.command = ATA_CMD_FLUSH; |
| |
| sil_exec_cmd(sata, pcmd, 0); |
| } |
| |
| static void sil_sata_cmd_flush_cache_ext(struct sil_sata *sata) |
| { |
| struct sil_cmd_block cmdb, *pcmd = &cmdb; |
| |
| memset((void *)pcmd, 0, sizeof(struct sil_cmd_block)); |
| pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| pcmd->prb.fis.pm_port_c = (1 << 7); |
| pcmd->prb.fis.command = ATA_CMD_FLUSH_EXT; |
| |
| sil_exec_cmd(sata, pcmd, 0); |
| } |
| |
| /* |
| * SATA interface between low level driver and command layer |
| */ |
| static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, |
| void *buffer) |
| { |
| struct sil_sata_priv *priv = dev_get_plat(dev); |
| int port_number = priv->port_num; |
| struct sil_sata *sata = priv->sil_sata_desc[port_number]; |
| ulong rc; |
| |
| if (sata->lba48) |
| rc = sil_sata_rw_lba48(sata, blknr, blkcnt, buffer, READ_CMD); |
| else |
| rc = sil_sata_rw_lba28(sata, blknr, blkcnt, buffer, READ_CMD); |
| |
| return rc; |
| } |
| |
| /* |
| * SATA interface between low level driver and command layer |
| */ |
| ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, |
| const void *buffer) |
| { |
| struct sil_sata_priv *priv = dev_get_plat(dev); |
| int port_number = priv->port_num; |
| struct sil_sata *sata = priv->sil_sata_desc[port_number]; |
| ulong rc; |
| |
| if (sata->lba48) { |
| rc = sil_sata_rw_lba48(sata, blknr, blkcnt, buffer, WRITE_CMD); |
| if (sata->wcache && sata->flush_ext) |
| sil_sata_cmd_flush_cache_ext(sata); |
| } else { |
| rc = sil_sata_rw_lba28(sata, blknr, blkcnt, buffer, WRITE_CMD); |
| if (sata->wcache && sata->flush) |
| sil_sata_cmd_flush_cache(sata); |
| } |
| |
| return rc; |
| } |
| |
| static int sil_init_sata(struct udevice *uc_dev, int dev) |
| { |
| struct sil_sata_priv *priv = dev_get_plat(uc_dev); |
| struct sil_sata *sata; |
| void *port; |
| u32 tmp; |
| int cnt; |
| |
| printf("SATA#%d:\n", dev); |
| |
| port = (void *)sata_info.iobase[1] + |
| PORT_REGS_SIZE * (dev - sata_info.portbase); |
| |
| /* Initial PHY setting */ |
| writel(0x20c, port + PORT_PHY_CFG); |
| |
| /* clear port RST */ |
| tmp = readl(port + PORT_CTRL_STAT); |
| if (tmp & PORT_CS_PORT_RST) { |
| writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); |
| tmp = ata_wait_register(port + PORT_CTRL_STAT, |
| PORT_CS_PORT_RST, PORT_CS_PORT_RST, 100); |
| if (tmp & PORT_CS_PORT_RST) |
| printf("Err: Failed to clear port RST\n"); |
| } |
| |
| /* Check if device is present */ |
| for (cnt = 0; cnt < 100; cnt++) { |
| tmp = readl(port + PORT_SSTATUS); |
| if ((tmp & 0xF) == 0x3) |
| break; |
| mdelay(1); |
| } |
| |
| tmp = readl(port + PORT_SSTATUS); |
| if ((tmp & 0xf) != 0x3) { |
| printf(" (No RDY)\n"); |
| return 1; |
| } |
| |
| /* Wait for port ready */ |
| tmp = ata_wait_register(port + PORT_CTRL_STAT, |
| PORT_CS_RDY, PORT_CS_RDY, 100); |
| if ((tmp & PORT_CS_RDY) != PORT_CS_RDY) { |
| printf("%d port not ready.\n", dev); |
| return 1; |
| } |
| |
| /* configure port */ |
| sil_config_port(port); |
| |
| /* Reset port */ |
| writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); |
| readl(port + PORT_CTRL_STAT); |
| tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST, |
| PORT_CS_DEV_RST, 100); |
| if (tmp & PORT_CS_DEV_RST) { |
| printf("%d port reset failed.\n", dev); |
| return 1; |
| } |
| |
| sata = (struct sil_sata *)malloc(sizeof(struct sil_sata)); |
| if (!sata) { |
| printf("%d no memory.\n", dev); |
| return 1; |
| } |
| memset((void *)sata, 0, sizeof(struct sil_sata)); |
| |
| /* Save the private struct to block device struct */ |
| priv->sil_sata_desc[dev] = sata; |
| priv->port_num = dev; |
| sata->devno = uc_dev->parent; |
| sata->id = dev; |
| sata->port = port; |
| sprintf(sata->name, "SATA#%d", dev); |
| sil_cmd_soft_reset(sata); |
| tmp = readl(port + PORT_SSTATUS); |
| tmp = (tmp >> 4) & 0xf; |
| printf(" (%s)\n", sata_spd_string(tmp)); |
| |
| return 0; |
| } |
| |
| static int scan_sata(struct udevice *blk_dev, int dev) |
| { |
| struct blk_desc *desc = dev_get_uclass_plat(blk_dev); |
| struct sil_sata_priv *priv = dev_get_plat(blk_dev); |
| struct sil_sata *sata = priv->sil_sata_desc[dev]; |
| unsigned char serial[ATA_ID_SERNO_LEN + 1]; |
| unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; |
| unsigned char product[ATA_ID_PROD_LEN + 1]; |
| u16 *id; |
| |
| id = (u16 *)malloc(ATA_ID_WORDS * 2); |
| if (!id) { |
| printf("Id malloc failed\n"); |
| return 1; |
| } |
| sil_cmd_identify_device(sata, id); |
| |
| sil_sata_set_feature_by_id(sata, id); |
| |
| /* Serial number */ |
| ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); |
| |
| /* Firmware version */ |
| ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); |
| |
| /* Product model */ |
| ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); |
| |
| memcpy(desc->product, serial, sizeof(serial)); |
| memcpy(desc->revision, firmware, sizeof(firmware)); |
| memcpy(desc->vendor, product, sizeof(product)); |
| desc->lba = ata_id_n_sectors(id); |
| #ifdef CONFIG_LBA48 |
| desc->lba48 = sata->lba48; |
| #endif |
| |
| #ifdef DEBUG |
| ata_dump_id(id); |
| #endif |
| free((void *)id); |
| |
| return 0; |
| } |
| |
| static const struct blk_ops sata_sil_blk_ops = { |
| .read = sata_read, |
| .write = sata_write, |
| }; |
| |
| U_BOOT_DRIVER(sata_sil_driver) = { |
| .name = "sata_sil_blk", |
| .id = UCLASS_BLK, |
| .ops = &sata_sil_blk_ops, |
| .plat_auto = sizeof(struct sil_sata_priv), |
| }; |
| |
| static int sil_unbind_device(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = device_remove(dev, DM_REMOVE_NORMAL); |
| if (ret) |
| return ret; |
| |
| ret = device_unbind(dev); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int sil_pci_probe(struct udevice *dev) |
| { |
| struct udevice *blk; |
| int failed_number; |
| char sata_name[10]; |
| pci_dev_t devno; |
| u16 word; |
| int ret; |
| int i; |
| |
| failed_number = 0; |
| |
| /* Get PCI device number */ |
| devno = dm_pci_get_bdf(dev); |
| if (devno == -1) |
| return 1; |
| |
| dm_pci_read_config16(dev, PCI_DEVICE_ID, &word); |
| |
| /* get the port count */ |
| word &= 0xf; |
| |
| sata_info.portbase = 0; |
| sata_info.maxport = sata_info.portbase + word; |
| sata_info.devno = devno; |
| |
| /* Read out all BARs */ |
| sata_info.iobase[0] = (ulong)dm_pci_map_bar(dev, |
| PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE, |
| PCI_REGION_MEM); |
| sata_info.iobase[1] = (ulong)dm_pci_map_bar(dev, |
| PCI_BASE_ADDRESS_2, 0, 0, PCI_REGION_TYPE, |
| PCI_REGION_MEM); |
| |
| /* mask out the unused bits */ |
| sata_info.iobase[0] &= 0xffffff80; |
| sata_info.iobase[1] &= 0xfffffc00; |
| |
| /* Enable Bus Mastering and memory region */ |
| dm_pci_write_config16(dev, PCI_COMMAND, |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| |
| /* Check if mem accesses and Bus Mastering are enabled. */ |
| dm_pci_read_config16(dev, PCI_COMMAND, &word); |
| if (!(word & PCI_COMMAND_MEMORY) || |
| (!(word & PCI_COMMAND_MASTER))) { |
| printf("Error: Can not enable MEM access or Bus Mastering.\n"); |
| debug("PCI command: %04x\n", word); |
| return 1; |
| } |
| |
| /* GPIO off */ |
| writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD)); |
| /* clear global reset & mask interrupts during initialization */ |
| writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL)); |
| |
| for (i = sata_info.portbase; i < sata_info.maxport; i++) { |
| snprintf(sata_name, sizeof(sata_name), "sil_sata%d", i); |
| ret = blk_create_devicef(dev, "sata_sil_blk", sata_name, |
| UCLASS_AHCI, -1, DEFAULT_BLKSZ, |
| 0, &blk); |
| if (ret) { |
| debug("Can't create device\n"); |
| return ret; |
| } |
| |
| ret = sil_init_sata(blk, i); |
| if (ret) { |
| ret = sil_unbind_device(blk); |
| if (ret) |
| return ret; |
| |
| failed_number++; |
| continue; |
| } |
| |
| ret = scan_sata(blk, i); |
| if (ret) { |
| ret = sil_unbind_device(blk); |
| if (ret) |
| return ret; |
| |
| failed_number++; |
| continue; |
| } |
| |
| ret = device_probe(dev); |
| if (ret < 0) { |
| debug("Probing %s failed (%d)\n", dev->name, ret); |
| ret = sil_unbind_device(blk); |
| device_unbind(dev); |
| if (ret) |
| return ret; |
| |
| failed_number++; |
| continue; |
| } |
| } |
| |
| if (failed_number == sata_info.maxport) |
| return -ENODEV; |
| else |
| return 0; |
| } |
| |
| static int sil_pci_remove(struct udevice *dev) |
| { |
| int i; |
| struct sil_sata *sata; |
| struct sil_sata_priv *priv; |
| |
| priv = dev_get_priv(dev); |
| |
| for (i = sata_info.portbase; i < sata_info.maxport; i++) { |
| sata = priv->sil_sata_desc[i]; |
| if (sata) |
| free(sata); |
| } |
| |
| return 0; |
| } |
| |
| static int sata_sil_scan(struct udevice *dev) |
| { |
| /* Nothing to do here */ |
| |
| return 0; |
| } |
| |
| struct sil_ops sata_sil_ops = { |
| .scan = sata_sil_scan, |
| }; |
| |
| static const struct udevice_id sil_pci_ids[] = { |
| { .compatible = "sil-pci-sample" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(sil_ahci_pci) = { |
| .name = "sil_ahci_pci", |
| .id = UCLASS_AHCI, |
| .of_match = sil_pci_ids, |
| .ops = &sata_sil_ops, |
| .probe = sil_pci_probe, |
| .remove = sil_pci_remove, |
| .priv_auto = sizeof(struct sil_sata_priv), |
| }; |
| |
| U_BOOT_PCI_DEVICE(sil_ahci_pci, supported); |