mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
and enabled it in respective defconfig.
Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index 9e521ed..8a311e1 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -96,6 +96,9 @@
Overwrite bootmode selected via boot mode pins to tell SPL what should
be the next boot device.
+config ZYNQ_SDHCI_MAX_FREQ
+ default 200000000
+
config SPL_ZYNQMP_ALT_BOOTMODE
hex
default 0x0 if JTAG_MODE
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index b9cd45b..8772904 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -63,4 +63,7 @@
Add register writes to boot.bin format (max 256 pairs).
Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+config ZYNQ_SDHCI_MAX_FREQ
+ default 52000000
+
endif
diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
index 7f8e774..00db5e3 100644
--- a/configs/xilinx_zynqmp_ep_defconfig
+++ b/configs/xilinx_zynqmp_ep_defconfig
@@ -3,6 +3,7 @@
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_ZYNQ_SDHCI_MAX_FREQ=52000000
CONFIG_ZYNQMP_USB=y
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108"
CONFIG_DEBUG_UART=y
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 88a1359..9967fff 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -481,6 +481,12 @@
help
Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+config ZYNQ_SDHCI_MAX_FREQ
+ int "Set the maximum frequency of the controller"
+ depends on MMC_SDHCI_ZYNQ
+ help
+ Set the maximum frequency of the controller.
+
config MMC_SUNXI
bool "Allwinner sunxi SD/MMC Host Controller support"
depends on ARCH_SUNXI && !UART0_PORT_F
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 825af80..f5fc245 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -56,9 +56,6 @@
#if defined(CONFIG_MMC_SDHCI_ZYNQ)
# define CONFIG_SUPPORT_EMMC_BOOT
-# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
-# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
-# endif
#endif
#ifdef CONFIG_NAND_ARASAN
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index 3a572b7..a77eeea 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -13,7 +13,6 @@
#ifndef __CONFIG_ZYNQMP_EP_H
#define __CONFIG_ZYNQMP_EP_H
-#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)
#define CONFIG_ZYNQ_EEPROM
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 0ebb66b..554fb66 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -73,11 +73,6 @@
#define CONFIG_MTD_DEVICE
#endif
-/* MMC */
-#if defined(CONFIG_MMC_SDHCI_ZYNQ)
-# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
-#endif
-
#ifdef CONFIG_USB_EHCI_ZYNQ
# define CONFIG_EHCI_IS_TDI