ide: Avoid preprocessor for CONFIG_LBA48
Use IS_ENABLED() instead for all conditions. Add the 'lba48' flag into
struct blk_desc always, since it uses very little space. Use a bool so
the meaning is clearer.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
diff --git a/drivers/block/ide.c b/drivers/block/ide.c
index 6c5227a..4520133 100644
--- a/drivers/block/ide.c
+++ b/drivers/block/ide.c
@@ -540,11 +540,9 @@
((unsigned long) iobuf[5] << 16) +
((unsigned long) iobuf[6] << 8) + ((unsigned long) iobuf[7]);
dev_desc->log2blksz = LOG2(dev_desc->blksz);
-#ifdef CONFIG_LBA48
+
/* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
- dev_desc->lba48 = 0;
-#endif
- return;
+ dev_desc->lba48 = false;
}
static void ide_ident(struct blk_desc *dev_desc)
@@ -645,9 +643,9 @@
((unsigned long)iop.lba_capacity[0]) |
((unsigned long)iop.lba_capacity[1] << 16);
-#ifdef CONFIG_LBA48
- if (iop.command_set_2 & 0x0400) { /* LBA 48 support */
- dev_desc->lba48 = 1;
+ if (IS_ENABLED(CONFIG_LBA48) && (iop.command_set_2 & 0x0400)) {
+ /* LBA 48 support */
+ dev_desc->lba48 = true;
for (int i = 0; i < 4; i++)
iop.lba48_capacity[i] = be16_to_cpu(iop.lba48_capacity[i]);
dev_desc->lba =
@@ -656,9 +654,9 @@
((unsigned long long)iop.lba48_capacity[2] << 32) |
((unsigned long long)iop.lba48_capacity[3] << 48));
} else {
- dev_desc->lba48 = 0;
+ dev_desc->lba48 = false;
}
-#endif /* CONFIG_LBA48 */
+
/* assuming HD */
dev_desc->type = DEV_TYPE_HARDDISK;
dev_desc->blksz = ATA_BLOCKSIZE;
@@ -795,15 +793,13 @@
ulong n = 0;
unsigned char c;
unsigned char pwrsave = 0; /* power save */
+ bool lba48 = false;
-#ifdef CONFIG_LBA48
- unsigned char lba48 = 0;
-
- if (blknr & 0x0000fffff0000000ULL) {
+ if (IS_ENABLED(CONFIG_LBA48) && (blknr & 0x0000fffff0000000ULL)) {
/* more than 28 bits used, use 48bit mode */
- lba48 = 1;
+ lba48 = true;
}
-#endif
+
debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
device, blknr, blkcnt, (ulong) buffer);
@@ -845,8 +841,7 @@
printf("IDE read: device %d not ready\n", device);
break;
}
-#ifdef CONFIG_LBA48
- if (lba48) {
+ if (IS_ENABLED(CONFIG_LBA48) && lba48) {
/* write high bits */
ide_outb(device, ATA_SECT_CNT, 0);
ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
@@ -858,21 +853,17 @@
ide_outb(device, ATA_LBA_HIGH, 0);
#endif
}
-#endif
ide_outb(device, ATA_SECT_CNT, 1);
ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
-#ifdef CONFIG_LBA48
- if (lba48) {
+ if (IS_ENABLED(CONFIG_LBA48) && lba48) {
ide_outb(device, ATA_DEV_HD,
ATA_LBA | ATA_DEVICE(device));
ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_READ_EXT);
- } else
-#endif
- {
+ } else {
ide_outb(device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) | ((blknr >> 24) & 0xF));
ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_READ);
@@ -914,15 +905,12 @@
int device = block_dev->devnum;
ulong n = 0;
unsigned char c;
+ bool lba48 = false;
-#ifdef CONFIG_LBA48
- unsigned char lba48 = 0;
-
- if (blknr & 0x0000fffff0000000ULL) {
+ if (IS_ENABLED(CONFIG_LBA48) && (blknr & 0x0000fffff0000000ULL)) {
/* more than 28 bits used, use 48bit mode */
- lba48 = 1;
+ lba48 = true;
}
-#endif
/* Select device
*/
@@ -935,8 +923,7 @@
printf("IDE read: device %d not ready\n", device);
goto WR_OUT;
}
-#ifdef CONFIG_LBA48
- if (lba48) {
+ if (IS_ENABLED(CONFIG_LBA48) && lba48) {
/* write high bits */
ide_outb(device, ATA_SECT_CNT, 0);
ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
@@ -948,21 +935,17 @@
ide_outb(device, ATA_LBA_HIGH, 0);
#endif
}
-#endif
ide_outb(device, ATA_SECT_CNT, 1);
ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
-#ifdef CONFIG_LBA48
- if (lba48) {
+ if (IS_ENABLED(CONFIG_LBA48) && lba48) {
ide_outb(device, ATA_DEV_HD,
ATA_LBA | ATA_DEVICE(device));
ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_WRITE_EXT);
- } else
-#endif
- {
+ } else {
ide_outb(device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) | ((blknr >> 24) & 0xF));
ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_WRITE);
diff --git a/include/blk.h b/include/blk.h
index 871922d..2c9c798 100644
--- a/include/blk.h
+++ b/include/blk.h
@@ -62,10 +62,8 @@
unsigned char hwpart; /* HW partition, e.g. for eMMC */
unsigned char type; /* device type */
unsigned char removable; /* removable device */
-#ifdef CONFIG_LBA48
/* device can use 48bit addr (ATA/ATAPI v7) */
- unsigned char lba48;
-#endif
+ bool lba48;
unsigned char atapi; /* Use ATAPI protocol */
lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */