Merge branch 'master' of git://git.denx.de/u-boot-sh
- Fixes for Gen 2 V2H Blanche
diff --git a/Kconfig b/Kconfig
index 66148ce..b4864cd 100644
--- a/Kconfig
+++ b/Kconfig
@@ -115,6 +115,7 @@
config NR_DRAM_BANKS
int "Number of DRAM banks"
+ default 1 if ARCH_SUNXI
default 4
help
This defines the number of DRAM banks.
diff --git a/Makefile b/Makefile
index fa687f1..7fae3c2 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
VERSION = 2020
PATCHLEVEL = 04
SUBLEVEL =
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME =
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d36788..bbb1e27 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -989,6 +989,8 @@
select USB_KEYBOARD if DISTRO_DEFAULTS
select USB_STORAGE if DISTRO_DEFAULTS
select SPL_USE_TINY_PRINTF
+ select USE_PREBOOT
+ select SYS_RELOC_GD_ENV_ADDR
imply CMD_DM
imply CMD_GPT
imply CMD_UBI if MTD_RAW_NAND
@@ -1366,6 +1368,7 @@
select ARM64
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
+ select BOARD_LATE_INIT
help
Support for Freescale LS1028ARDB platform
The LS1028A Development System (RDB) is a high-performance
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 275c66d..b256391 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -74,11 +74,11 @@
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
- select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC if !DM_I2C
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply CMD_PCI
config ARCH_LS1046A
@@ -107,11 +107,11 @@
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
- select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC if !DM_I2C
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply SCSI
imply SCSI_AHCI
diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts
index 3fd37be..029a8e3 100644
--- a/arch/arm/dts/fsl-ls1028a-qds.dts
+++ b/arch/arm/dts/fsl-ls1028a-qds.dts
@@ -49,6 +49,8 @@
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
};
};
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index a8f4085..85b4815 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -48,6 +48,8 @@
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
};
};
diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts
index 3d41e3b..d391593 100644
--- a/arch/arm/dts/fsl-ls1046a-frwy.dts
+++ b/arch/arm/dts/fsl-ls1046a-frwy.dts
@@ -32,3 +32,6 @@
};
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
index c95f44f..76dc397 100644
--- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -80,3 +80,7 @@
&sata {
status = "okay";
};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index a05c9e9..83e34ab 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -43,3 +43,11 @@
&sata {
status = "okay";
};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts
index 34df0f5..592fd59 100644
--- a/arch/arm/dts/fsl-lx2160a-qds.dts
+++ b/arch/arm/dts/fsl-lx2160a-qds.dts
@@ -13,6 +13,9 @@
/ {
model = "NXP Layerscape LX2160AQDS Board";
compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+ aliases {
+ spi0 = &fspi;
+ };
};
&esdhc0 {
@@ -46,6 +49,20 @@
};
};
+&fspi {
+ status = "okay";
+
+ mt35xu512aba0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
&sata0 {
status = "okay";
};
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index e542c69..87617ca 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -39,6 +39,8 @@
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
};
mt35xu512aba1: flash@1 {
@@ -47,6 +49,8 @@
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <1>;
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
};
};
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 84e5cb4..333e407 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,7 +4,8 @@
!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_LX2160A) && \
!defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \
!defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \
- !defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_U8500) && \
+ !defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \
+ !defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \
!defined(CONFIG_CORTINA_PLATFORM)
#include <asm/arch/gpio.h>
#endif
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3a3b673..be0822b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -994,7 +994,7 @@
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
- depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6
help
Enable support for SPI Flash. This option allows SPL to read from
sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c
index 043d9f6..a3997b2 100644
--- a/arch/arm/mach-sunxi/spl_spi_sunxi.c
+++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c
@@ -36,13 +36,13 @@
/* SUN4I variant of the SPI controller */
/*****************************************************************************/
-#define SUN4I_SPI0_CCTL (0x01C05000 + 0x1C)
-#define SUN4I_SPI0_CTL (0x01C05000 + 0x08)
-#define SUN4I_SPI0_RX (0x01C05000 + 0x00)
-#define SUN4I_SPI0_TX (0x01C05000 + 0x04)
-#define SUN4I_SPI0_FIFO_STA (0x01C05000 + 0x28)
-#define SUN4I_SPI0_BC (0x01C05000 + 0x20)
-#define SUN4I_SPI0_TC (0x01C05000 + 0x24)
+#define SUN4I_SPI0_CCTL 0x1C
+#define SUN4I_SPI0_CTL 0x08
+#define SUN4I_SPI0_RX 0x00
+#define SUN4I_SPI0_TX 0x04
+#define SUN4I_SPI0_FIFO_STA 0x28
+#define SUN4I_SPI0_BC 0x20
+#define SUN4I_SPI0_TC 0x24
#define SUN4I_CTL_ENABLE BIT(0)
#define SUN4I_CTL_MASTER BIT(1)
@@ -54,15 +54,15 @@
/* SUN6I variant of the SPI controller */
/*****************************************************************************/
-#define SUN6I_SPI0_CCTL (0x01C68000 + 0x24)
-#define SUN6I_SPI0_GCR (0x01C68000 + 0x04)
-#define SUN6I_SPI0_TCR (0x01C68000 + 0x08)
-#define SUN6I_SPI0_FIFO_STA (0x01C68000 + 0x1C)
-#define SUN6I_SPI0_MBC (0x01C68000 + 0x30)
-#define SUN6I_SPI0_MTC (0x01C68000 + 0x34)
-#define SUN6I_SPI0_BCC (0x01C68000 + 0x38)
-#define SUN6I_SPI0_TXD (0x01C68000 + 0x200)
-#define SUN6I_SPI0_RXD (0x01C68000 + 0x300)
+#define SUN6I_SPI0_CCTL 0x24
+#define SUN6I_SPI0_GCR 0x04
+#define SUN6I_SPI0_TCR 0x08
+#define SUN6I_SPI0_FIFO_STA 0x1C
+#define SUN6I_SPI0_MBC 0x30
+#define SUN6I_SPI0_MTC 0x34
+#define SUN6I_SPI0_BCC 0x38
+#define SUN6I_SPI0_TXD 0x200
+#define SUN6I_SPI0_RXD 0x300
#define SUN6I_CTL_ENABLE BIT(0)
#define SUN6I_CTL_MASTER BIT(1)
@@ -72,7 +72,12 @@
/*****************************************************************************/
#define CCM_AHB_GATING0 (0x01C20000 + 0x60)
+#define CCM_H6_SPI_BGR_REG (0x03001000 + 0x96c)
+#ifdef CONFIG_MACH_SUN50I_H6
+#define CCM_SPI0_CLK (0x03001000 + 0x940)
+#else
#define CCM_SPI0_CLK (0x01C20000 + 0xA0)
+#endif
#define SUN6I_BUS_SOFT_RST_REG0 (0x01C20000 + 0x2C0)
#define AHB_RESET_SPI0_SHIFT 20
@@ -86,74 +91,111 @@
/*
* Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting
* from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3.
+ * The H6 uses PC0, PC2, PC3, PC5.
*/
static void spi0_pinmux_setup(unsigned int pin_function)
{
- unsigned int pin;
+ /* All chips use PC0 and PC2. */
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(0), pin_function);
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(2), pin_function);
- for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++)
- sunxi_gpio_set_cfgpin(pin, pin_function);
+ /* All chips except H6 use PC1, and only H6 uses PC5. */
+ if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(1), pin_function);
+ else
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(5), pin_function);
- if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I))
+ /* Older generations use PC23 for CS, newer ones use PC3. */
+ if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I) ||
+ IS_ENABLED(CONFIG_MACH_SUN8I_R40))
sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function);
else
sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function);
}
+static bool is_sun6i_gen_spi(void)
+{
+ return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ||
+ IS_ENABLED(CONFIG_MACH_SUN50I_H6);
+}
+
+static uintptr_t spi0_base_address(void)
+{
+ if (IS_ENABLED(CONFIG_MACH_SUN8I_R40))
+ return 0x01C05000;
+
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ return 0x05010000;
+
+ if (!is_sun6i_gen_spi())
+ return 0x01C05000;
+
+ return 0x01C68000;
+}
+
/*
* Setup 6 MHz from OSC24M (because the BROM is doing the same).
*/
static void spi0_enable_clock(void)
{
+ uintptr_t base = spi0_base_address();
+
/* Deassert SPI0 reset on SUN6I */
- if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ setbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
+ else if (is_sun6i_gen_spi())
setbits_le32(SUN6I_BUS_SOFT_RST_REG0,
(1 << AHB_RESET_SPI0_SHIFT));
/* Open the SPI0 gate */
- setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
+ if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
/* Divide by 4 */
- writel(SPI0_CLK_DIV_BY_4, IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ?
- SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL);
+ writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
+ SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
/* 24MHz from OSC24M */
writel((1 << 31), CCM_SPI0_CLK);
- if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) {
+ if (is_sun6i_gen_spi()) {
/* Enable SPI in the master mode and do a soft reset */
- setbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
- SUN6I_CTL_ENABLE |
- SUN6I_CTL_SRST);
+ setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
+ SUN6I_CTL_ENABLE | SUN6I_CTL_SRST);
/* Wait for completion */
- while (readl(SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
+ while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
;
} else {
/* Enable SPI in the master mode and reset FIFO */
- setbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
- SUN4I_CTL_ENABLE |
- SUN4I_CTL_TF_RST |
- SUN4I_CTL_RF_RST);
+ setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
+ SUN4I_CTL_ENABLE |
+ SUN4I_CTL_TF_RST |
+ SUN4I_CTL_RF_RST);
}
}
static void spi0_disable_clock(void)
{
+ uintptr_t base = spi0_base_address();
+
/* Disable the SPI0 controller */
- if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
- clrbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
+ if (is_sun6i_gen_spi())
+ clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
SUN6I_CTL_ENABLE);
else
- clrbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
+ clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
SUN4I_CTL_ENABLE);
/* Disable the SPI0 clock */
writel(0, CCM_SPI0_CLK);
/* Close the SPI0 gate */
- clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
+ if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
/* Assert SPI0 reset on SUN6I */
- if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ clrbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
+ else if (is_sun6i_gen_spi())
clrbits_le32(SUN6I_BUS_SOFT_RST_REG0,
(1 << AHB_RESET_SPI0_SHIFT));
}
@@ -162,7 +204,8 @@
{
unsigned int pin_function = SUNXI_GPC_SPI0;
- if (IS_ENABLED(CONFIG_MACH_SUN50I))
+ if (IS_ENABLED(CONFIG_MACH_SUN50I) ||
+ IS_ENABLED(CONFIG_MACH_SUN50I_H6))
pin_function = SUN50I_GPC_SPI0;
spi0_pinmux_setup(pin_function);
@@ -173,7 +216,8 @@
{
/* New SoCs can disable pins, older could only set them as input */
unsigned int pin_function = SUNXI_GPIO_INPUT;
- if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
+
+ if (is_sun6i_gen_spi())
pin_function = SUNXI_GPIO_DISABLE;
spi0_disable_clock();
@@ -227,31 +271,32 @@
{
u8 *buf8 = buf;
u32 chunk_len;
+ uintptr_t base = spi0_base_address();
while (len > 0) {
chunk_len = len;
if (chunk_len > SPI_READ_MAX_SIZE)
chunk_len = SPI_READ_MAX_SIZE;
- if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) {
+ if (is_sun6i_gen_spi()) {
sunxi_spi0_read_data(buf8, addr, chunk_len,
- SUN6I_SPI0_TCR,
+ base + SUN6I_SPI0_TCR,
SUN6I_TCR_XCH,
- SUN6I_SPI0_FIFO_STA,
- SUN6I_SPI0_TXD,
- SUN6I_SPI0_RXD,
- SUN6I_SPI0_MBC,
- SUN6I_SPI0_MTC,
- SUN6I_SPI0_BCC);
+ base + SUN6I_SPI0_FIFO_STA,
+ base + SUN6I_SPI0_TXD,
+ base + SUN6I_SPI0_RXD,
+ base + SUN6I_SPI0_MBC,
+ base + SUN6I_SPI0_MTC,
+ base + SUN6I_SPI0_BCC);
} else {
sunxi_spi0_read_data(buf8, addr, chunk_len,
- SUN4I_SPI0_CTL,
+ base + SUN4I_SPI0_CTL,
SUN4I_CTL_XCH,
- SUN4I_SPI0_FIFO_STA,
- SUN4I_SPI0_TX,
- SUN4I_SPI0_RX,
- SUN4I_SPI0_BC,
- SUN4I_SPI0_TC,
+ base + SUN4I_SPI0_FIFO_STA,
+ base + SUN4I_SPI0_TX,
+ base + SUN4I_SPI0_RX,
+ base + SUN4I_SPI0_BC,
+ base + SUN4I_SPI0_TC,
0);
}
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 639353a..5a2fa91 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -35,7 +35,7 @@
config SYS_LS_PFE_ESBC_ADDR
hex "PFE Firmware HDR Addr"
- default 0x40700000
+ default 0x40640000
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 8c96b96..2d4b18c 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
*/
#include <common.h>
@@ -271,11 +272,24 @@
return 66666666;
}
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return ret;
+ }
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@@ -290,8 +304,10 @@
* When resuming from deep sleep, the I2C channel may not be
* in the default channel. So, switch to the default channel
* before accessing DDR SPD.
+ *
+ * PCA9547 mount on I2C1 bus
*/
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
fsl_initdram();
#if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
defined(CONFIG_SPL_BUILD)
@@ -304,16 +320,83 @@
int i2c_multiplexer_select_vid_channel(u8 channel)
{
- return select_i2c_ch_pca9547(channel);
+ return select_i2c_ch_pca9547(channel, 0);
}
void board_retimer_init(void)
{
u8 reg;
+ int bus_num = 0;
/* Retimer is connected to I2C1_CH7_CH5 */
- select_i2c_ch_pca9547(I2C_MUX_CH7);
+ select_i2c_ch_pca9547(I2C_MUX_CH7, bus_num);
reg = I2C_MUX_CH5;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_SEC,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return;
+ }
+ dm_i2c_write(dev, 0, ®, 1);
+
+ /* Access to Control/Shared register */
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_RETIMER_ADDR,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return;
+ }
+
+ reg = 0x0;
+ dm_i2c_write(dev, 0xff, ®, 1);
+
+ /* Read device revision and ID */
+ dm_i2c_read(dev, 1, ®, 1);
+ debug("Retimer version id = 0x%x\n", reg);
+
+ /* Enable Broadcast. All writes target all channel register sets */
+ reg = 0x0c;
+ dm_i2c_write(dev, 0xff, ®, 1);
+
+ /* Reset Channel Registers */
+ dm_i2c_read(dev, 0, ®, 1);
+ reg |= 0x4;
+ dm_i2c_write(dev, 0, ®, 1);
+
+ /* Enable override divider select and Enable Override Output Mux */
+ dm_i2c_read(dev, 9, ®, 1);
+ reg |= 0x24;
+ dm_i2c_write(dev, 9, ®, 1);
+
+ /* Select VCO Divider to full rate (000) */
+ dm_i2c_read(dev, 0x18, ®, 1);
+ reg &= 0x8f;
+ dm_i2c_write(dev, 0x18, ®, 1);
+
+ /* Selects active PFD MUX Input as Re-timed Data (001) */
+ dm_i2c_read(dev, 0x1e, ®, 1);
+ reg &= 0x3f;
+ reg |= 0x20;
+ dm_i2c_write(dev, 0x1e, ®, 1);
+
+ /* Set data rate as 10.3125 Gbps */
+ reg = 0x0;
+ dm_i2c_write(dev, 0x60, ®, 1);
+ reg = 0xb2;
+ dm_i2c_write(dev, 0x61, ®, 1);
+ reg = 0x90;
+ dm_i2c_write(dev, 0x62, ®, 1);
+ reg = 0xb3;
+ dm_i2c_write(dev, 0x63, ®, 1);
+ reg = 0xcd;
+ dm_i2c_write(dev, 0x64, ®, 1);
+#else
i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, ®, 1);
/* Access to Control/Shared register */
@@ -360,9 +443,10 @@
i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1);
reg = 0xcd;
i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1);
+#endif
/* Return the default channel */
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, bus_num);
}
int board_early_init_f(void)
@@ -375,9 +459,11 @@
u8 uart;
#endif
+#ifdef CONFIG_SYS_I2C
#ifdef CONFIG_SYS_I2C_EARLY_INIT
i2c_early_init_f();
#endif
+#endif
fsl_lsch2_early_init_f();
#ifdef CONFIG_HAS_FSL_XHCI_USB
@@ -457,7 +543,7 @@
erratum_a010315();
#endif
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
board_retimer_init();
#ifdef CONFIG_SYS_FSL_SERDES
diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c
index db8b3a5..8c0abb6 100644
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@@ -36,11 +36,24 @@
DECLARE_GLOBAL_DATA_PTR;
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return ret;
+ }
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@@ -149,7 +162,7 @@
sec_init();
#endif
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
return 0;
}
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index aac5d9a..cabd7ee 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
*/
#include <common.h>
@@ -269,11 +270,23 @@
}
#endif
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return ret;
+ }
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@@ -288,8 +301,10 @@
* When resuming from deep sleep, the I2C channel may not be
* in the default channel. So, switch to the default channel
* before accessing DDR SPD.
+ *
+ * PCA9547 mount on I2C1 bus
*/
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
fsl_initdram();
#if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
defined(CONFIG_SPL_BUILD)
@@ -302,7 +317,7 @@
int i2c_multiplexer_select_vid_channel(u8 channel)
{
- return select_i2c_ch_pca9547(channel);
+ return select_i2c_ch_pca9547(channel, 0);
}
int board_early_init_f(void)
@@ -315,9 +330,11 @@
u8 uart;
#endif
+#ifdef CONFIG_SYS_I2C
#ifdef CONFIG_SYS_I2C_EARLY_INIT
i2c_early_init_f();
#endif
+#endif
fsl_lsch2_early_init_f();
#ifdef CONFIG_HAS_FSL_XHCI_USB
@@ -394,7 +411,7 @@
int board_init(void)
{
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
#ifdef CONFIG_SYS_FSL_SERDES
config_serdes_mux();
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 103b0cc..4b20bb4 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -29,11 +29,14 @@
#include "../common/vid.h"
#include <fsl_immap.h>
#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/gic-v3.h>
+#include <cpu_func.h>
#ifdef CONFIG_EMC2305
#include "../common/emc2305.h"
#endif
+#define GIC_LPI_SIZE 0x200000
#ifdef CONFIG_TARGET_LX2160AQDS
#define CFG_MUX_I2C_SDHC(reg, value) ((reg & 0x3f) | value)
#define SET_CFG_MUX1_SDHC1_SDHC(reg) (reg & 0x3f)
@@ -149,6 +152,7 @@
reg_name = reg_names;
remaining_names_len = names_len - (reg_name - reg_names);
+ i = 0;
while ((i < ARRAY_SIZE(reg_names_map)) && remaining_names_len) {
old_name_len = strlen(reg_names_map[i].old_str);
new_name_len = strlen(reg_names_map[i].new_str);
@@ -274,7 +278,14 @@
int init_func_vid(void)
{
- if (adjust_vdd(0) < 0)
+ int set_vid;
+
+ if (IS_SVR_REV(get_svr(), 1, 0))
+ set_vid = adjust_vdd(800);
+ else
+ set_vid = adjust_vdd(0);
+
+ if (set_vid < 0)
printf("core voltage not adjusted\n");
return 0;
@@ -469,10 +480,16 @@
reg11 = SET_CFG_MUX3_SDHC1_SPI(reg11, 0x01);
QIXIS_WRITE(brdcfg[11], reg11);
} else {
- /* Routes {SDHC1_DAT4} to SDHC1 adapter slot */
+ /*
+ * If {SDHC1_DAT4} has been configured to route to SDHC1_VS,
+ * do not change it.
+ * Otherwise route {SDHC1_DAT4} to SDHC1 adapter slot.
+ */
reg11 = QIXIS_READ(brdcfg[11]);
- reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
- QIXIS_WRITE(brdcfg[11], reg11);
+ if ((reg11 & 0x30) != 0x30) {
+ reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
+ QIXIS_WRITE(brdcfg[11], reg11);
+ }
/* - Routes {SDHC1_DAT5, SDHC1_DAT6} to SDHC1 adapter slot.
* {SDHC1_DAT7, SDHC1_DS } to SDHC1 adapter slot.
@@ -627,8 +644,22 @@
}
#endif
-#ifdef CONFIG_OF_BOARD_SETUP
+#ifdef CONFIG_GIC_V3_ITS
+void fdt_fixup_gic_lpi_memory(void *blob, u64 gic_lpi_base)
+{
+ u32 phandle;
+ int err;
+ struct fdt_memory gic_lpi;
+
+ gic_lpi.start = gic_lpi_base;
+ gic_lpi.end = gic_lpi_base + GIC_LPI_SIZE - 1;
+ err = fdtdec_add_reserved_memory(blob, "gic-lpi", &gic_lpi, &phandle);
+ if (err < 0)
+ debug("failed to add reserved memory: %d\n", err);
+}
+#endif
+#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
int i;
@@ -639,6 +670,7 @@
u64 mc_memory_base = 0;
u64 mc_memory_size = 0;
u16 total_memory_banks;
+ u64 gic_lpi_base;
ft_cpu_setup(blob, bd);
@@ -658,6 +690,12 @@
size[i] = gd->bd->bi_dram[i].size;
}
+#ifdef CONFIG_GIC_V3_ITS
+ gic_lpi_base = gd->arch.resv_ram - GIC_LPI_SIZE;
+ gic_lpi_tables_init(gic_lpi_base, cpu_numcores());
+ fdt_fixup_gic_lpi_memory(blob, gic_lpi_base);
+#endif
+
#ifdef CONFIG_RESV_RAM
/* reduce size if reserved memory is within this bank */
if (gd->arch.resv_ram >= base[0] &&
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 363156c..b835f15 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=480
@@ -11,12 +10,8 @@
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
@@ -25,4 +20,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index b31d6ac..4145f72 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
@@ -9,16 +8,11 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
CONFIG_AXP152_POWER=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index fe5b20f..a879021 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
@@ -13,13 +12,8 @@
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUNXI_NO_PMIC=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 5163b33..bb68698 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
@@ -15,14 +14,11 @@
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_AXP_ALDO3_VOLT=3300
@@ -30,4 +26,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
index 7dc736e..40b3883 100644
--- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -13,14 +12,11 @@
CONFIG_SPL_SPI_SUNXI=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
@@ -36,4 +32,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index ea97bbb..2b082ca 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -11,14 +10,11 @@
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
@@ -34,4 +30,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 3fbf874..975df4e 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -9,12 +8,8 @@
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -24,4 +19,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
index 2802df6..0ccb609 100644
--- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig
+++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -11,12 +10,8 @@
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -27,4 +22,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index fe72b1f..0a68fd9 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -12,12 +11,8 @@
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -28,4 +23,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
index 696a211..5b5ed3b 100644
--- a/configs/A20-Olimex-SOM-EVB_defconfig
+++ b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -13,12 +12,8 @@
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
@@ -29,4 +24,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
index ba18d1a..ee3b752 100644
--- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
+++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -13,12 +12,9 @@
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_PHY_ADDR=3
@@ -34,4 +30,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig
index 9515ba3..0272911 100644
--- a/configs/A20-Olimex-SOM204-EVB_defconfig
+++ b/configs/A20-Olimex-SOM204-EVB_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -12,12 +11,9 @@
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_PHY_ADDR=3
@@ -33,4 +29,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig
index 3c6ddad..5f41498 100644
--- a/configs/A33-OLinuXino_defconfig
+++ b/configs/A33-OLinuXino_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=432
@@ -16,11 +15,6 @@
CONFIG_VIDEO_LCD_BL_EN="PB2"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DCDC1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index d66ad1b..72aac60 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -14,11 +13,6 @@
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index b36a973..1f54733 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
@@ -15,12 +14,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
index 2be5edc..5c72c97 100644
--- a/configs/Auxtek-T003_defconfig
+++ b/configs/Auxtek-T003_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
@@ -8,14 +7,9 @@
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP152_POWER=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 5fbefd2..1cd13b9 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP152_POWER=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index 31a37e9..e3d6767 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_R40=y
CONFIG_DRAM_CLK=576
@@ -11,10 +10,8 @@
CONFIG_USB2_VBUS_PIN="PH23"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_RGMII=y
CONFIG_SUN8I_EMAC=y
@@ -23,4 +20,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 6471a2c..b309171 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -9,12 +8,8 @@
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
@@ -24,4 +19,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig
index 5762622..2649c7e 100644
--- a/configs/Bananapi_m2m_defconfig
+++ b/configs/Bananapi_m2m_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=600
@@ -10,11 +9,8 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_ID_DET="PH8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-bananapi-m2m"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index e9f4f30..0cec760 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -11,12 +10,8 @@
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
@@ -27,4 +22,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
index f28f5fc..a373dfd 100644
--- a/configs/CHIP_defconfig
+++ b/configs/CHIP_defconfig
@@ -1,19 +1,14 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DFU_RAM=y
# CONFIG_MMC is not set
CONFIG_AXP_ALDO3_VOLT=3300
@@ -22,4 +17,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
index 844b6a6..3bd8b2a 100644
--- a/configs/CHIP_pro_defconfig
+++ b/configs/CHIP_pro_defconfig
@@ -1,11 +1,9 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y
@@ -15,7 +13,6 @@
CONFIG_ENV_IS_IN_UBI=y
CONFIG_ENV_UBI_PART="UBI"
CONFIG_ENV_UBI_VOLUME="uboot-env"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
@@ -28,5 +25,4 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index a3470d6..f9026a4 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -1,17 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
@@ -20,4 +15,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index a669343..9af5eb3 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
@@ -14,14 +13,9 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
CONFIG_VIDEO_LCD_SPI_MOSI="PA2"
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index cc59f5d..f70f92e 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=240
@@ -17,11 +16,7 @@
CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
@@ -29,4 +24,3 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 0c05ca4..0c7aafd 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
@@ -8,12 +7,8 @@
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -21,4 +16,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
index 84280a2..90b2c69 100644
--- a/configs/Cubieboard4_defconfig
+++ b/configs/Cubieboard4_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN9I=y
CONFIG_DRAM_CLK=672
@@ -12,10 +11,5 @@
CONFIG_USB1_VBUS_PIN="PH14"
CONFIG_USB3_VBUS_PIN="PH15"
CONFIG_AXP_GPIO=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP809_POWER=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index ad2a006..2b96c11 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=480
@@ -8,16 +7,11 @@
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index bc4d4a2..32c44ff 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -13,14 +12,11 @@
CONFIG_GMAC_TX_DELAY=1
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
@@ -32,4 +28,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
index 79763c1..7717feb 100644
--- a/configs/Cubietruck_plus_defconfig
+++ b/configs/Cubietruck_plus_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A83T=y
CONFIG_DRAM_CLK=672
@@ -15,12 +14,8 @@
CONFIG_I2C0_ENABLE=y
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_AXP_DLDO3_VOLT=2500
@@ -29,4 +24,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig
index cfeb356..8e284a3 100644
--- a/configs/Empire_electronix_d709_defconfig
+++ b/configs/Empire_electronix_d709_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig
index 24a0493..26cc0e7 100644
--- a/configs/Empire_electronix_m712_defconfig
+++ b/configs/Empire_electronix_m712_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
@@ -15,12 +14,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index aa97e5a..15984ec 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=251
@@ -9,11 +8,7 @@
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
@@ -21,4 +16,3 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index ff84e2d..01580a8 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_EMR1=4
@@ -15,11 +14,6 @@
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig
index 71ffb9d..9ddfb6f 100644
--- a/configs/Itead_Ibox_A20_defconfig
+++ b/configs/Itead_Ibox_A20_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
@@ -8,12 +7,8 @@
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -21,4 +16,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
index 869fd74..c3cb365 100644
--- a/configs/Lamobo_R1_defconfig
+++ b/configs/Lamobo_R1_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -10,12 +9,8 @@
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_B53_SWITCH=y
CONFIG_B53_PHY_PORTS=0x1f
@@ -26,4 +21,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index d86d255..04d7b64 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -1,13 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_NETDEVICES is not set
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index 891251e..7377deb 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=408
@@ -10,12 +9,8 @@
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
@@ -24,4 +19,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 9444bb5..ad78152 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
@@ -8,12 +7,8 @@
CONFIG_SATAPWR="PH2"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -21,4 +16,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index f31d298..e5166e9 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
index 75b5221..b323e32 100644
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@@ -1,16 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index 52f6927..69561be 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -10,10 +9,5 @@
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index 3fbd89f..29c2c68 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=360
@@ -13,15 +12,10 @@
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
CONFIG_VIDEO_LCD_SPI_CS="PH9"
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index b1214e0..be60869 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -1,15 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
@@ -17,4 +12,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index b9ff12e..babe9f1 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=120
@@ -8,11 +7,7 @@
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
@@ -23,4 +18,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index c23413e..20906ff 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_MACPWR="PH15"
@@ -8,16 +7,11 @@
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
index b4825f2..1282d87 100644
--- a/configs/Mele_I7_defconfig
+++ b/configs/Mele_I7_defconfig
@@ -1,17 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
@@ -21,4 +16,3 @@
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index ba1018f..60d15ab 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -9,15 +8,10 @@
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index f8b71e9..8900c7a 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -9,12 +8,8 @@
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
@@ -22,4 +17,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index 4051ade..b1b3b7a 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -1,17 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
@@ -21,4 +16,3 @@
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index a691e48..15db396 100644
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN9I=y
CONFIG_DRAM_CLK=672
@@ -12,10 +11,5 @@
CONFIG_USB1_VBUS_PIN="PH4"
CONFIG_USB3_VBUS_PIN="PH5"
CONFIG_AXP_GPIO=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP809_POWER=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index 29e32a4..30468e1 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -1,18 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig
index b2e8b83..ba9cc58 100644
--- a/configs/Nintendo_NES_Classic_Edition_defconfig
+++ b/configs/Nintendo_NES_Classic_Edition_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=600
@@ -9,13 +8,9 @@
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic-edition"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
@@ -26,5 +21,4 @@
CONFIG_AXP_ELDO2_VOLT=1800
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index 8254551..af8c17d 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -12,12 +11,8 @@
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
@@ -26,4 +21,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index 0bba89d..43ee76f 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -14,12 +13,8 @@
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
@@ -28,4 +23,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
index d7bd848..74fb9e3 100644
--- a/configs/Sinlinx_SinA31s_defconfig
+++ b/configs/Sinlinx_SinA31s_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=432
@@ -11,15 +10,10 @@
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index c68d831..9f29870 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=552
@@ -13,16 +12,12 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CMD_DFU=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig
index b8a2d47..b2ecf4e 100644
--- a/configs/Sinovoip_BPI_M2_defconfig
+++ b/configs/Sinovoip_BPI_M2_defconfig
@@ -1,17 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
@@ -21,4 +16,3 @@
CONFIG_AXP_DLDO1_VOLT=3000
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index 6188e69..b1b75bf 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A83T=y
CONFIG_DRAM_TYPE=7
@@ -16,12 +15,8 @@
CONFIG_AXP_GPIO=y
CONFIG_SATAPWR="PD25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_AXP_DCDC5_VOLT=1200
@@ -30,4 +25,3 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig
index 5e2ec3f..ca17523 100644
--- a/configs/Sunchip_CX-A99_defconfig
+++ b/configs/Sunchip_CX-A99_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN9I=y
CONFIG_DRAM_CLK=600
@@ -12,9 +11,4 @@
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_USB3_VBUS_PIN="PL8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cx-a99"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index a562b09..0c18423 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
@@ -20,13 +19,8 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig
index 019549d..2253dd3 100644
--- a/configs/Wexler_TAB7200_defconfig
+++ b/configs/Wexler_TAB7200_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -13,13 +12,8 @@
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
index 08cbba2a5..8630f39 100644
--- a/configs/Wits_Pro_A20_DKT_defconfig
+++ b/configs/Wits_Pro_A20_DKT_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -12,12 +11,8 @@
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
@@ -26,4 +21,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig
index cc28226..1cfd683 100644
--- a/configs/Wobo_i5_defconfig
+++ b/configs/Wobo_i5_defconfig
@@ -1,21 +1,15 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_MMC0_CD_PIN="PB3"
CONFIG_USB1_VBUS_PIN="PG12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index da8a891..6fb1a7c 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=408
@@ -19,11 +18,6 @@
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig
index 6fd0920..a44207e 100644
--- a/configs/Yones_Toptech_BS1078_V2_defconfig
+++ b/configs/Yones_Toptech_BS1078_V2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=420
@@ -16,11 +15,6 @@
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-yones-toptech-bs1078-v2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/a64-olinuxino-emmc_defconfig b/configs/a64-olinuxino-emmc_defconfig
index 8443a6d..08687cb 100644
--- a/configs/a64-olinuxino-emmc_defconfig
+++ b/configs/a64-olinuxino-emmc_defconfig
@@ -1,17 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig
index 1ba59cc..2724361 100644
--- a/configs/a64-olinuxino_defconfig
+++ b/configs/a64-olinuxino_defconfig
@@ -1,17 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig
index e31e21b..9567d67 100644
--- a/configs/amarula_a64_relic_defconfig
+++ b/configs/amarula_a64_relic_defconfig
@@ -1,18 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 18b880e..df19646 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=384
@@ -9,15 +8,10 @@
CONFIG_USB2_VBUS_PIN="PH12"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig
index be61a82..3813b6e 100644
--- a/configs/bananapi_m1_plus_defconfig
+++ b/configs/bananapi_m1_plus_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
@@ -9,12 +8,8 @@
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SCSI_AHCI=y
CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
index 9b02878..256d9fc 100644
--- a/configs/bananapi_m2_berry_defconfig
+++ b/configs/bananapi_m2_berry_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_R40=y
CONFIG_DRAM_CLK=576
@@ -8,10 +7,8 @@
CONFIG_USB1_VBUS_PIN="PH23"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SCSI_AHCI=y
CONFIG_RGMII=y
CONFIG_SUN8I_EMAC=y
@@ -20,4 +17,3 @@
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m2_plus_h3_defconfig b/configs/bananapi_m2_plus_h3_defconfig
index d516125..21c6aa6 100644
--- a/configs/bananapi_m2_plus_h3_defconfig
+++ b/configs/bananapi_m2_plus_h3_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m2_plus_h5_defconfig b/configs/bananapi_m2_plus_h5_defconfig
index 94d18ce..afed137 100644
--- a/configs/bananapi_m2_plus_h5_defconfig
+++ b/configs/bananapi_m2_plus_h5_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-bananapi-m2-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig
index cecea59..f95c7fa 100644
--- a/configs/bananapi_m2_zero_defconfig
+++ b/configs/bananapi_m2_zero_defconfig
@@ -5,8 +5,4 @@
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
index c26fd0c..7f31cf0 100644
--- a/configs/bananapi_m64_defconfig
+++ b/configs/bananapi_m64_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
index 8189314..42e3897 100644
--- a/configs/beelink_gs1_defconfig
+++ b/configs/beelink_gs1_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H6=y
CONFIG_SUNXI_DRAM_H6_LPDDR3=y
@@ -8,11 +7,7 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/beelink_x2_defconfig b/configs/beelink_x2_defconfig
index d314cfa..7aca82c 100644
--- a/configs/beelink_x2_defconfig
+++ b/configs/beelink_x2_defconfig
@@ -5,11 +5,6 @@
CONFIG_DRAM_CLK=567
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-beelink-x2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig
index 82bf8b4..e0bcaf3 100644
--- a/configs/colorfly_e708_q1_defconfig
+++ b/configs/colorfly_e708_q1_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-colorfly-e708-q1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO2_VOLT=1800
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig
index c9cccd6..12088d4 100644
--- a/configs/difrnce_dit4350_defconfig
+++ b/configs/difrnce_dit4350_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
@@ -15,12 +14,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-difrnce-dit4350"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig
index 80c1d24..a19b890 100644
--- a/configs/dserve_dsrv9703c_defconfig
+++ b/configs/dserve_dsrv9703c_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_MMC0_CD_PIN="PH1"
@@ -14,11 +13,6 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/emlid_neutis_n5_devboard_defconfig b/configs/emlid_neutis_n5_devboard_defconfig
index 9b106ab..2a2392c 100644
--- a/configs/emlid_neutis_n5_devboard_defconfig
+++ b/configs/emlid_neutis_n5_devboard_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=408
@@ -8,8 +7,4 @@
# CONFIG_DRAM_ODT_EN is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-emlid-neutis-n5-devboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 954e73c..0b7af23 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=432
@@ -17,14 +16,9 @@
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig
index 5309876..dd64241 100644
--- a/configs/gt90h_v4_defconfig
+++ b/configs/gt90h_v4_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A23=y
CONFIG_DRAM_CLK=480
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig
index fb18004..c6246c8 100644
--- a/configs/h8_homlet_v2_defconfig
+++ b/configs/h8_homlet_v2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A83T=y
CONFIG_DRAM_CLK=480
@@ -10,14 +9,9 @@
CONFIG_USB1_VBUS_PIN="PL6"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index b15c9de..8543780 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -1,21 +1,15 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
CONFIG_MACPWR="PH21"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index d4f256f..8bd104a 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
@@ -14,11 +13,6 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index 3bafd4c..d996075 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
@@ -14,11 +13,6 @@
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index 771cdfa..16d0844 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
@@ -13,12 +12,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig
index 598465d..ff271f3 100644
--- a/configs/iNet_D978_rev2_defconfig
+++ b/configs/iNet_D978_rev2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=456
@@ -17,13 +16,8 @@
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-inet-d978-rev2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig
index f9b8c73..d6da5ac 100644
--- a/configs/icnova-a20-swac_defconfig
+++ b/configs/icnova-a20-swac_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
@@ -13,16 +12,11 @@
CONFIG_VIDEO_LCD_POWER="PH22"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_UNZIP=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig
index 293a747..ca898c2 100644
--- a/configs/inet1_defconfig
+++ b/configs/inet1_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
@@ -14,13 +13,8 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig
index 0fdcf2b..dbe32c1 100644
--- a/configs/inet86dz_defconfig
+++ b/configs/inet86dz_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A23=y
CONFIG_DRAM_CLK=552
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-inet86dz"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig
index 7bf1439..4490e2f 100644
--- a/configs/inet97fv2_defconfig
+++ b/configs/inet97fv2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
@@ -13,11 +12,6 @@
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig
index cc8602b..d36bb75 100644
--- a/configs/inet98v_rev2_defconfig
+++ b/configs/inet98v_rev2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
@@ -15,12 +14,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig
index 2837f06..0c53a12 100644
--- a/configs/inet9f_rev03_defconfig
+++ b/configs/inet9f_rev03_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
@@ -13,11 +12,6 @@
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig
index 280158f..83dc7f8 100644
--- a/configs/inet_q972_defconfig
+++ b/configs/inet_q972_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=384
@@ -15,13 +14,8 @@
CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-inet-q972"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 7be4418..06357ed 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=312
@@ -8,15 +7,10 @@
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MII=y
CONFIG_SUN4I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig
index f648b7d..c9a1708 100644
--- a/configs/libretech_all_h3_cc_h2_plus_defconfig
+++ b/configs/libretech_all_h3_cc_h2_plus_defconfig
@@ -1,17 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig
index c39a116..7175123 100644
--- a/configs/libretech_all_h3_cc_h3_defconfig
+++ b/configs/libretech_all_h3_cc_h3_defconfig
@@ -1,17 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig
index aac3d06..b70b13f 100644
--- a/configs/libretech_all_h3_cc_h5_defconfig
+++ b/configs/libretech_all_h3_cc_h5_defconfig
@@ -1,17 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_it_h5_defconfig b/configs/libretech_all_h3_it_h5_defconfig
index 76cee85..159eb38 100644
--- a/configs/libretech_all_h3_it_h5_defconfig
+++ b/configs/libretech_all_h3_it_h5_defconfig
@@ -1,21 +1,15 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-it"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h5_cc_h5_defconfig b/configs/libretech_all_h5_cc_h5_defconfig
index 9ccb29d..ddbd1b5 100644
--- a/configs/libretech_all_h5_cc_h5_defconfig
+++ b/configs/libretech_all_h5_cc_h5_defconfig
@@ -1,17 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h5-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_SUN8I_EMAC=y
@@ -19,4 +14,3 @@
CONFIG_DM_SPI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 11d0cee..1e60148 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -5,6 +5,7 @@
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ENV_OFFSET=0x300000
CONFIG_DM_GPIO=y
+CONFIG_BLK=y
CONFIG_FSL_LS_PPA=y
CONFIG_QSPI_AHB_INIT=y
CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig
index 2818bdf..420a2f4 100644
--- a/configs/ls1012afrdm_tfa_defconfig
+++ b/configs/ls1012afrdm_tfa_defconfig
@@ -6,6 +6,7 @@
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ENV_OFFSET=0x500000
CONFIG_DM_GPIO=y
+CONFIG_BLK=y
CONFIG_QSPI_AHB_INIT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index 2f48da8..4e937e5 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig
index 4dec418..fdf2324 100644
--- a/configs/ls1012ardb_tfa_defconfig
+++ b/configs/ls1012ardb_tfa_defconfig
@@ -40,7 +40,6 @@
CONFIG_SATA_CEVA=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig
index 7ba0c47..512f775 100644
--- a/configs/ls1021aiot_qspi_defconfig
+++ b/configs/ls1021aiot_qspi_defconfig
@@ -45,5 +45,6 @@
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 3ef5520..7ffd1c3 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -45,7 +45,6 @@
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index 2885552..93b86af 100644
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index 9d9229a..f89c2ee 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -64,3 +64,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index c45eaea..a169bfe 100644
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -78,3 +78,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 8d28fe1..01d0af3 100644
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -63,3 +63,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index 86b2eb5..65eff7c 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -58,3 +58,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index bf3f0d0..c5042a3 100644
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -79,3 +79,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index 0449469..12706a4 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -72,3 +72,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 0ece698..b7335bc 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -63,3 +63,5 @@
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index 24db72a..6e594ed 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -71,3 +71,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 5e030e2..153a628 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index 0676cbc..d1e5343 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -55,3 +55,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 1f4c570..252c7c8 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -75,3 +75,5 @@
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index e7fe2de..de18aaa 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -74,3 +74,5 @@
CONFIG_USB_XHCI_DWC3=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 6529c73..149b25f 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -74,3 +74,5 @@
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 2282624..b386fc6 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -73,3 +73,5 @@
CONFIG_USB_XHCI_DWC3=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 94ca502..36eb0fc 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -56,3 +56,5 @@
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index 4154075..eaddbca 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -59,3 +59,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig
index 2c25878..616984f 100644
--- a/configs/ls1046afrwy_tfa_defconfig
+++ b/configs/ls1046afrwy_tfa_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index 6ea27c7..ed25b7a 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 04c1176..0a50bb1 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index b0a24f2..17d1685 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -64,3 +64,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 3ffe6a6..0bafcbe 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -70,3 +70,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index d6253c7..ff0fd45 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -58,3 +58,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index fad3316..78edb45 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -80,3 +80,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index 3571a6f..d085daf 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -74,3 +74,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index e173747..6a93914 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -61,3 +61,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 824fc51..04e6b23 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -71,3 +71,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 768ce7a..bbb352d 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -73,3 +73,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index aff9bf8..b9c8a88 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index b482e73..51edada 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -57,3 +57,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 1e2770a..84e0596 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -77,3 +77,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_SPL_GZIP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 1f5fa8f..9954e89 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -70,3 +70,5 @@
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 1970904..3502809 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -72,3 +72,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 1dde0ae..9e3042b 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -54,3 +54,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 280ca83..2f7686b 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -58,3 +58,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 7c3b827..319f710 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -65,6 +65,7 @@
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
+CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
@@ -73,3 +74,4 @@
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index 449b3cb..0161dba 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -4,6 +4,7 @@
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_ENV_OFFSET=0x500000
CONFIG_DM_GPIO=y
CONFIG_FSPI_AHB_EN_4BYTE=y
@@ -32,6 +33,8 @@
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds"
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SATA_CEVA=y
@@ -65,8 +68,10 @@
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index d1fffb3..10098ab 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -60,6 +60,7 @@
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
@@ -68,3 +69,4 @@
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 93f3e20..c8582aa 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -4,6 +4,7 @@
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_ENV_OFFSET=0x500000
CONFIG_DM_GPIO=y
CONFIG_EMC2305=y
@@ -33,6 +34,8 @@
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SATA_CEVA=y
@@ -41,7 +44,6 @@
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
@@ -64,8 +66,10 @@
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index 620dac6..829491f 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=251
@@ -9,11 +8,7 @@
CONFIG_USB1_VBUS_PIN="PH24"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
@@ -21,4 +16,3 @@
CONFIG_AXP_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index cf6b11a..3ffbef0 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -1,20 +1,14 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_DRAM_EMR1=0
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP152_POWER=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 472758c..077c21f 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -1,16 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_USB2_VBUS_PIN="PH12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUNXI_NO_PMIC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index ec76622..17042af 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -1,15 +1,9 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_a64_defconfig b/configs/nanopi_a64_defconfig
index dedb389..0d46b33 100644
--- a/configs/nanopi_a64_defconfig
+++ b/configs/nanopi_a64_defconfig
@@ -1,16 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-nanopi-a64"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig
index 00f8678..2b55853 100644
--- a/configs/nanopi_m1_defconfig
+++ b/configs/nanopi_m1_defconfig
@@ -1,15 +1,9 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig
index b3e1460..398fd99 100644
--- a/configs/nanopi_m1_plus_defconfig
+++ b/configs/nanopi_m1_plus_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
@@ -8,12 +7,7 @@
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig
index cbac2a9..753a305 100644
--- a/configs/nanopi_neo2_defconfig
+++ b/configs/nanopi_neo2_defconfig
@@ -1,18 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
index 01bf61d..baaccf1 100644
--- a/configs/nanopi_neo_air_defconfig
+++ b/configs/nanopi_neo_air_defconfig
@@ -1,17 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig
index a29922d..d115d84 100644
--- a/configs/nanopi_neo_defconfig
+++ b/configs/nanopi_neo_defconfig
@@ -1,18 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig
index 65f971e..a852388 100644
--- a/configs/nanopi_neo_plus2_defconfig
+++ b/configs/nanopi_neo_plus2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=408
@@ -9,11 +8,7 @@
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo-plus2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/oceanic_5205_5inmfd_defconfig b/configs/oceanic_5205_5inmfd_defconfig
index f71be7f..5ce0693 100644
--- a/configs/oceanic_5205_5inmfd_defconfig
+++ b/configs/oceanic_5205_5inmfd_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
@@ -10,12 +9,7 @@
CONFIG_MMC0_CD_PIN=""
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-oceanic-5205-5inmfd"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig
index 6c02949..ba161e5 100644
--- a/configs/orangepi_2_defconfig
+++ b/configs/orangepi_2_defconfig
@@ -1,20 +1,14 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index c0826c0..35ebf38 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -1,16 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H6=y
CONFIG_SUNXI_DRAM_H6_LPDDR3=y
CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig
index f631902..51afd7f 100644
--- a/configs/orangepi_lite_defconfig
+++ b/configs/orangepi_lite_defconfig
@@ -1,15 +1,9 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig
index ea74e22..75bccd0 100644
--- a/configs/orangepi_one_defconfig
+++ b/configs/orangepi_one_defconfig
@@ -1,16 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
index 5e8117c..d97b217 100644
--- a/configs/orangepi_one_plus_defconfig
+++ b/configs/orangepi_one_plus_defconfig
@@ -1,16 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H6=y
CONFIG_SUNXI_DRAM_H6_LPDDR3=y
CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
index 20209ec..8cb3b2b 100644
--- a/configs/orangepi_pc2_defconfig
+++ b/configs/orangepi_pc2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
@@ -9,13 +8,8 @@
CONFIG_MACPWR="PD6"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index 216b4e8..a676294 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -1,18 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig
index edd2db1..97221f7 100644
--- a/configs/orangepi_pc_plus_defconfig
+++ b/configs/orangepi_pc_plus_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_plus2e_defconfig b/configs/orangepi_plus2e_defconfig
index 8eba1c3..72862f2 100644
--- a/configs/orangepi_plus2e_defconfig
+++ b/configs/orangepi_plus2e_defconfig
@@ -1,20 +1,14 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus2e"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
index 48e5140..025b9f6 100644
--- a/configs/orangepi_plus_defconfig
+++ b/configs/orangepi_plus_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
@@ -9,14 +8,9 @@
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_SATAPWR="PG11"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
index 5f67123..fa7672a 100644
--- a/configs/orangepi_prime_defconfig
+++ b/configs/orangepi_prime_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
index 0431fec..6f770fa 100644
--- a/configs/orangepi_r1_defconfig
+++ b/configs/orangepi_r1_defconfig
@@ -1,17 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
# CONFIG_VIDEO_DE2 is not set
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
index bcf7458..047a6b7 100644
--- a/configs/orangepi_win_defconfig
+++ b/configs/orangepi_win_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MACPWR="PD14"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_PHY_REALTEK=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index 51d8ec0..c989f0d 100644
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -1,17 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
# CONFIG_VIDEO_DE2 is not set
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-zero"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig
index 3d56024..a38c9be 100644
--- a/configs/orangepi_zero_plus2_defconfig
+++ b/configs/orangepi_zero_plus2_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
@@ -9,12 +8,7 @@
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig
index d40f4f2..6b50ff9 100644
--- a/configs/orangepi_zero_plus2_h3_defconfig
+++ b/configs/orangepi_zero_plus2_h3_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
@@ -8,11 +7,7 @@
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-zero-plus2"
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig
index 22ffbdf..77c7bdb 100644
--- a/configs/orangepi_zero_plus_defconfig
+++ b/configs/orangepi_zero_plus_defconfig
@@ -1,18 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=624
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig
index 08163bb..2c2edbc 100644
--- a/configs/parrot_r16_defconfig
+++ b/configs/parrot_r16_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=600
@@ -12,15 +11,11 @@
CONFIG_USB1_VBUS_PIN="PD12"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-parrot"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_CONS_INDEX=5
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig
index 6e2c247..ef108a1 100644
--- a/configs/pine64-lts_defconfig
+++ b/configs/pine64-lts_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
@@ -10,12 +9,7 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-lts"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
index 9c34788..a037577 100644
--- a/configs/pine64_plus_defconfig
+++ b/configs/pine64_plus_defconfig
@@ -1,20 +1,14 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_PINE64_DT_SELECTION=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_PHY_REALTEK=y
CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index b49dbea..cb5e624 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I_H6=y
CONFIG_SUNXI_DRAM_H6_LPDDR3=y
@@ -9,10 +8,7 @@
CONFIG_USB3_VBUS_PIN="PL5"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_SPL_SPI_SUNXI=y
diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
index 929434e..43df3f3 100644
--- a/configs/pinebook_defconfig
+++ b/configs/pinebook_defconfig
@@ -7,18 +7,13 @@
CONFIG_DRAM_ZQ=3881949
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_R_I2C_ENABLE=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_PWM=y
CONFIG_PWM_SUNXI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
# CONFIG_USB_GADGET is not set
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig
index c3c7855..712451a 100644
--- a/configs/polaroid_mid2407pxe03_defconfig
+++ b/configs/polaroid_mid2407pxe03_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A23=y
CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-polaroid-mid2407pxe03"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig
index a6f519e..2aaf784 100644
--- a/configs/polaroid_mid2809pxe04_defconfig
+++ b/configs/polaroid_mid2809pxe04_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A23=y
CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-polaroid-mid2809pxe04"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig
index b002edb..f21ae9d 100644
--- a/configs/pov_protab2_ips9_defconfig
+++ b/configs/pov_protab2_ips9_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
@@ -14,11 +13,6 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig
index eb65020..f07d136 100644
--- a/configs/q8_a13_tablet_defconfig
+++ b/configs/q8_a13_tablet_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=384
@@ -15,12 +14,7 @@
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig
index f2c2248..05a7604 100644
--- a/configs/q8_a23_tablet_800x480_defconfig
+++ b/configs/q8_a23_tablet_800x480_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A23=y
CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig
index 803c46e..1c88e5f 100644
--- a/configs/q8_a33_tablet_1024x600_defconfig
+++ b/configs/q8_a33_tablet_1024x600_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=456
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig
index 20450eb..581117a 100644
--- a/configs/q8_a33_tablet_800x480_defconfig
+++ b/configs/q8_a33_tablet_800x480_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=456
@@ -16,12 +15,7 @@
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_CONS_INDEX=5
CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index 1317d87..057f29b 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -1,19 +1,13 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=384
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_AXP152_POWER=y
CONFIG_CONS_INDEX=2
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig
index 87ed552..98278bb 100644
--- a/configs/sopine_baseboard_defconfig
+++ b/configs/sopine_baseboard_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
@@ -11,13 +10,8 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig
index eba05cf..1045caf 100644
--- a/configs/sun8i_a23_evb_defconfig
+++ b/configs/sun8i_a23_evb_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A23=y
CONFIG_DRAM_CLK=552
@@ -9,12 +8,7 @@
CONFIG_USB0_VBUS_DET="axp_vbus_detect"
CONFIG_USB1_VBUS_PIN="PH7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_CONS_INDEX=5
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index 5d10532..427a29c 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=432
@@ -11,12 +10,7 @@
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/tbs_a711_defconfig b/configs/tbs_a711_defconfig
index a961e6b..509a87d 100644
--- a/configs/tbs_a711_defconfig
+++ b/configs/tbs_a711_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_MACH_SUN8I_A83T=y
CONFIG_DRAM_TYPE=7
@@ -13,11 +12,7 @@
CONFIG_USB0_ID_DET="PH11"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-tbs-a711"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_AXP_DCDC5_VOLT=1200
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig
index 1019dab..1eba20e 100644
--- a/configs/teres_i_defconfig
+++ b/configs/teres_i_defconfig
@@ -7,17 +7,12 @@
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_I2C0_ENABLE=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-teres-i"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_PWM=y
CONFIG_PWM_SUNXI=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
# CONFIG_USB_GADGET is not set
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
diff --git a/disk/Kconfig b/disk/Kconfig
index 28fb81c..747275c 100644
--- a/disk/Kconfig
+++ b/disk/Kconfig
@@ -46,6 +46,7 @@
config SPL_DOS_PARTITION
bool "Enable MS Dos partition table for SPL"
depends on SPL && PARTITIONS
+ default n if ARCH_SUNXI
default y if DOS_PARTITION
config ISO_PARTITION
@@ -112,6 +113,7 @@
config SPL_EFI_PARTITION
bool "Enable EFI GPT partition table for SPL"
depends on SPL && PARTITIONS
+ default n if ARCH_SUNXI
default y if EFI_PARTITION
config PARTITION_UUIDS
diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c
index cd510f2..ba4da69 100644
--- a/drivers/net/fm/ls1043.c
+++ b/drivers/net/fm/ls1043.c
@@ -65,12 +65,12 @@
if (port == FM1_DTSEC3)
if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) {
- return PHY_INTERFACE_MODE_RGMII_TXID;
+ return PHY_INTERFACE_MODE_RGMII_ID;
}
if (port == FM1_DTSEC4)
if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) {
- return PHY_INTERFACE_MODE_RGMII_TXID;
+ return PHY_INTERFACE_MODE_RGMII_ID;
}
/* handle SGMII */
diff --git a/drivers/net/fm/ls1046.c b/drivers/net/fm/ls1046.c
index 3617ad9..49b540b 100644
--- a/drivers/net/fm/ls1046.c
+++ b/drivers/net/fm/ls1046.c
@@ -71,12 +71,12 @@
if (port == FM1_DTSEC3)
if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII)
- return PHY_INTERFACE_MODE_RGMII_TXID;
+ return PHY_INTERFACE_MODE_RGMII_ID;
if (port == FM1_DTSEC4)
if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII)
- return PHY_INTERFACE_MODE_RGMII_TXID;
+ return PHY_INTERFACE_MODE_RGMII_ID;
/* handle SGMII, only MAC 2/5/6/9/10 available */
switch (port) {
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 2c49951..bed8f14 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -83,6 +83,8 @@
if_mode |= IF_MODE_GMII;
break;
case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
if_mode |= (IF_MODE_GMII | IF_MODE_RG);
break;
@@ -107,6 +109,8 @@
if_mode |= IF_MODE_EN_AUTO;
if (type == PHY_INTERFACE_MODE_RGMII ||
+ type == PHY_INTERFACE_MODE_RGMII_ID ||
+ type == PHY_INTERFACE_MODE_RGMII_RXID ||
type == PHY_INTERFACE_MODE_RGMII_TXID) {
if_mode &= ~IF_MODE_EN_AUTO;
if_mode &= ~IF_MODE_SETSP_MASK;
diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c
index c875f3a..890b6a8 100644
--- a/drivers/pci/pcie_ecam_generic.c
+++ b/drivers/pci/pcie_ecam_generic.c
@@ -19,6 +19,8 @@
*/
struct generic_ecam_pcie {
void *cfg_base;
+ pci_size_t size;
+ int first_busno;
};
/**
@@ -43,7 +45,7 @@
void *addr;
addr = pcie->cfg_base;
- addr += PCI_BUS(bdf) << 20;
+ addr += (PCI_BUS(bdf) - pcie->first_busno) << 20;
addr += PCI_DEV(bdf) << 15;
addr += PCI_FUNC(bdf) << 12;
addr += offset;
@@ -52,6 +54,16 @@
return 0;
}
+static bool pci_generic_ecam_addr_valid(const struct udevice *bus,
+ pci_dev_t bdf)
+{
+ struct generic_ecam_pcie *pcie = dev_get_priv(bus);
+ int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16);
+
+ return (PCI_BUS(bdf) >= pcie->first_busno &&
+ PCI_BUS(bdf) < pcie->first_busno + num_buses);
+}
+
/**
* pci_generic_ecam_read_config() - Read from configuration space
* @bus: Pointer to the PCI bus
@@ -68,6 +80,11 @@
pci_dev_t bdf, uint offset,
ulong *valuep, enum pci_size_t size)
{
+ if (!pci_generic_ecam_addr_valid(bus, bdf)) {
+ *valuep = pci_get_ff(size);
+ return 0;
+ }
+
return pci_generic_mmap_read_config(bus, pci_generic_ecam_conf_address,
bdf, offset, valuep, size);
}
@@ -88,6 +105,9 @@
uint offset, ulong value,
enum pci_size_t size)
{
+ if (!pci_generic_ecam_addr_valid(bus, bdf))
+ return 0;
+
return pci_generic_mmap_write_config(bus, pci_generic_ecam_conf_address,
bdf, offset, value, size);
}
@@ -116,13 +136,21 @@
return err;
}
- pcie->cfg_base = map_physmem(reg_res.start,
- fdt_resource_size(®_res),
- MAP_NOCACHE);
+ pcie->size = fdt_resource_size(®_res);
+ pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE);
return 0;
}
+static int pci_generic_ecam_probe(struct udevice *dev)
+{
+ struct generic_ecam_pcie *pcie = dev_get_priv(dev);
+
+ pcie->first_busno = dev->seq;
+
+ return 0;
+}
+
static const struct dm_pci_ops pci_generic_ecam_ops = {
.read_config = pci_generic_ecam_read_config,
.write_config = pci_generic_ecam_write_config,
@@ -138,6 +166,7 @@
.id = UCLASS_PCI,
.of_match = pci_generic_ecam_ids,
.ops = &pci_generic_ecam_ops,
+ .probe = pci_generic_ecam_probe,
.ofdata_to_platdata = pci_generic_ecam_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct generic_ecam_pcie),
};
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index bcddff2..b30f223 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -7,6 +7,7 @@
* Stefano Babic, DENX Software Engineering, sbabic@denx.de
*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2019 NXP
*/
#include <common.h>
@@ -21,8 +22,20 @@
if (check_reg(p, reg))
return -EINVAL;
+#if defined(CONFIG_DM_I2C)
+ struct udevice *dev;
+ int ret;
+ ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ p->bus);
+ return -ENXIO;
+ }
+#else /* Non DM I2C support - will be removed */
I2C_SET_BUS(p->bus);
+#endif
switch (pmic_i2c_tx_num) {
case 3:
@@ -53,7 +66,11 @@
return -EINVAL;
}
+#if defined(CONFIG_DM_I2C)
+ return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num);
+#else
return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
}
int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
@@ -65,9 +82,21 @@
if (check_reg(p, reg))
return -EINVAL;
- I2C_SET_BUS(p->bus);
+#if defined(CONFIG_DM_I2C)
+ struct udevice *dev;
+ ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ p->bus);
+ return -ENXIO;
+ }
+ ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num);
+#else /* Non DM I2C support - will be removed */
+ I2C_SET_BUS(p->bus);
ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
if (ret)
return ret;
@@ -100,12 +129,25 @@
int pmic_probe(struct pmic *p)
{
- i2c_set_bus_num(p->bus);
debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
+#if defined(CONFIG_DM_I2C)
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ p->bus);
+ return -ENXIO;
+ }
+#else /* Non DM I2C support - will be removed */
+ i2c_set_bus_num(p->bus);
if (i2c_probe(pmic_i2c_addr)) {
printf("Can't find PMIC:%s\n", p->name);
return -ENODEV;
}
+#endif
return 0;
}
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index bea4a92..928a891 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -108,6 +108,7 @@
choice
prompt "USB keyboard polling"
+ default SYS_USB_EVENT_POLL_VIA_INT_QUEUE if ARCH_SUNXI
default SYS_USB_EVENT_POLL
---help---
Enable a polling mechanism for USB keyboard.
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index dde4369..899dfdb 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -8,6 +8,9 @@
#include "ls1012a_common.h"
+#undef CONFIG_SYS_BOARD
+#define CONFIG_SYS_BOARD "ls1012afrwy"
+
/* Board Rev*/
#define BOARD_REV_A_B 0x0
#define BOARD_REV_C 0x00080000
@@ -63,9 +66,9 @@
"fdtheader_addr_r=0x80100000\0" \
"kernelheader_addr_r=0x80200000\0" \
"kernelheader_size=0x40000\0" \
- "kernel_addr_r=0x96000000\0" \
+ "kernel_addr_r=0x92000000\0" \
"fdt_addr_r=0x90000000\0" \
- "load_addr=0x96000000\0" \
+ "load_addr=0x92000000\0" \
"kernel_size=0x2800000\0" \
"kernelheader_size=0x40000\0" \
"console=ttyS0,115200\0" \
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 1d218aa..7821e98 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -207,12 +207,13 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-"initrd_high=0xffffffff\0" \
-"fdt_high=0xffffffff\0"
+"initrd_high=0xffffffff\0"
/*
* Miscellaneous configurable options
*/
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
+
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MEMINFO
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8bac2d2..5a2bd75 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -460,13 +460,11 @@
#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
- "fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
- "fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
#endif
@@ -474,6 +472,7 @@
/*
* Miscellaneous configurable options
*/
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 984df62..46c60aa 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -154,7 +154,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0" \
"fdt_addr=0x64f00000\0" \
"kernel_addr=0x61000000\0" \
"kernelheader_addr=0x60800000\0" \
@@ -216,6 +215,8 @@
"bootm $load_addr#$board\0"
/* Miscellaneous configurable options */
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
+
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 8e2784b..a628985 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -297,9 +297,8 @@
#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
+ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0" \
"fdt_addr=0x64f00000\0" \
"kernel_addr=0x65000000\0" \
"scriptaddr=0x80000000\0" \
@@ -313,7 +312,6 @@
"kernel_size=0x2800000\0" \
"kernel_addr_sd=0x8000\0" \
"kernel_size_sd=0x14000\0" \
- "$othbootargs\0" \
"othbootargs=cma=64M@0x0-0xb0000000\0" \
BOOTENV \
"boot_scripts=ls1021atwr_boot.scr\0" \
@@ -355,9 +353,8 @@
"$kernel_size && bootm $load_addr#$board\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+ "bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0" \
"fdt_addr=0x64f00000\0" \
"kernel_addr=0x61000000\0" \
"kernelheader_addr=0x60800000\0" \
@@ -375,7 +372,6 @@
"kernel_size_sd=0x14000\0" \
"kernelhdr_addr_sd=0x4000\0" \
"kernelhdr_size_sd=0x10\0" \
- "$othbootargs\0" \
"othbootargs=cma=64M@0x0-0xb0000000\0" \
BOOTENV \
"boot_scripts=ls1021atwr_boot.scr\0" \
@@ -441,6 +437,7 @@
/*
* Miscellaneous configurable options
*/
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 05b8cf0..6905694 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
*/
#ifndef __L1028A_COMMON_H
@@ -70,96 +70,10 @@
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
- func(USB, usb, 0)
+ func(USB, usb, 0) \
+ func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "board=ls1028ardb\0" \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "fdt_addr=0x00f00000\0" \
- "kernel_addr=0x01000000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_addr_r=0x81000000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "kernel_start=0x1000000\0" \
- "kernelheader_start=0x800000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernelheader_size=0x40000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x4000\0" \
- "kernelhdr_size_sd=0x10\0" \
- "console=ttyS0,115200\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- BOOTENV \
- "boot_scripts=ls1028ardb_boot.scr\0" \
- "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "scan_dev_for_boot=" \
- "echo Scanning ${devtype} " \
- "${devnum}:${distro_bootpart}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "run scan_dev_for_scripts; " \
- "done;" \
- "\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${scripthdraddr} ${prefix}${boot_script_hdr} " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
- "sf probe 0:0 && sf read $load_addr " \
- "$kernel_start $kernel_size ; env exists secureboot &&" \
- "sf read $kernelheader_addr_r $kernelheader_start " \
- "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
- " bootm $load_addr#$board\0" \
- "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
- "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
- "&& hdp load $load_addr 0x2000\0" \
- "sd_bootcmd=echo Trying load from SD ...;" \
- "mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
- "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
- "&& hdp load $load_addr 0x2000\0" \
- "emmc_bootcmd=echo Trying load from EMMC ..;" \
- "mmcinfo; mmc dev 1; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
- "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
- "&& hdp load $load_addr 0x2000\0"
-
#undef CONFIG_BOOTCOMMAND
#define XSPI_NOR_BOOTCOMMAND \
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 982df07..818b994 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
*/
#ifndef __LS1028A_QDS_H
@@ -90,8 +90,6 @@
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
- "initrd_high=0xffffffffffffffff\0" \
"fdt_addr=0x00f00000\0" \
"kernel_addr=0x01000000\0" \
"scriptaddr=0x80000000\0" \
@@ -101,15 +99,16 @@
"load_addr=0xa0000000\0" \
"kernel_addr_r=0x81000000\0" \
"fdt_addr_r=0x90000000\0" \
+ "fdt2_addr_r=0x90010000\0" \
"ramdisk_addr_r=0xa0000000\0" \
"kernel_start=0x1000000\0" \
- "kernelheader_start=0x800000\0" \
+ "kernelheader_start=0x600000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"kernelheader_size=0x40000\0" \
"kernel_addr_sd=0x8000\0" \
"kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x4000\0" \
+ "kernelhdr_addr_sd=0x3000\0" \
"kernelhdr_size_sd=0x10\0" \
"console=ttyS0,115200\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
@@ -141,19 +140,35 @@
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "sd_bootcmd=echo Trying load from SD ..;" \
- "mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
+ "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+ "sf probe 0:0 && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+ "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "sd_bootcmd=echo Trying load from SD ...;" \
+ "mmc dev 0; mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
"env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "emmc_bootcmd=echo Trying load from EMMC ..;" \
- "mmcinfo; mmc dev 1; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
+ "mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "emmc_bootcmd=echo Trying load from EMMC ..;" \
+ "mmc dev 1; mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
"env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0"
+ "bootm $load_addr#$board\0" \
+ "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
+ "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0"
+
#endif
#endif /* __LS1028A_QDS_H */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index a4c3d73..0f289cb 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -72,4 +72,92 @@
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
+/* Initial environment variables */
+#ifndef SPL_NO_ENV
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "board=ls1028ardb\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "bootm_size=0x10000000\0" \
+ "fdt_addr=0x00f00000\0" \
+ "kernel_addr=0x01000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x600000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernelheader_size=0x40000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
+ "kernelhdr_addr_sd=0x3000\0" \
+ "kernelhdr_size_sd=0x20\0" \
+ "console=ttyS0,115200\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1028ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+ "sf probe 0:0 && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+ "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "sd_bootcmd=echo Trying load from SD ...;" \
+ "mmc dev 0;mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "env exists secureboot && mmc read $kernelheader_addr_r " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
+ "mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "emmc_bootcmd=echo Trying load from EMMC ..;" \
+ "mmc dev 1;mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "env exists secureboot && mmc read $kernelheader_addr_r " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
+ "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0"
+#endif
#endif /* __LS1028A_RDB_H */
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index bf24d40..985f404 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Freescale Semiconductor
+ * Copyright (C) 2019 NXP
*/
#ifndef __LS1043A_COMMON_H
@@ -141,7 +142,17 @@
#endif
/* I2C */
+#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
/* PCIe */
#ifndef SPL_NO_PCIE
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 3944f87..e80c299 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,6 +16,7 @@
#define SPL_NO_QSPI
#define SPL_NO_USB
#define SPL_NO_SATA
+#undef CONFIG_DM_I2C
#endif
#if defined(CONFIG_SPL_BUILD) && \
(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
@@ -126,7 +127,17 @@
#endif
/* I2C */
+#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
/* PCIe */
#define CONFIG_PCIE1 /* PCIE controller 1 */
@@ -217,8 +228,7 @@
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
- "initrd_high=0xffffffffffffffff\0" \
+ "bootm_size=0x10000000\0" \
"fdt_addr=0x64f00000\0" \
"kernel_addr=0x65000000\0" \
"scriptaddr=0x80000000\0" \
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 361c72f..4ac4a8d 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -443,19 +443,47 @@
"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
"sf read 0x80100000 0xE00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
- "mcmemsize=0x70000000 \0"
-#define QSPI_NOR_BOOTCOMMAND "sf probe 0:0;" \
- "sf read 0x80001000 0xd00000 0x100000;"\
- " fsl_mc lazyapply dpl 0x80001000 &&" \
- " sf read $kernel_load $kernel_start" \
- " $kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
- " fsl_mc lazyapply dpl 0x80001000 &&" \
- " mmc read $kernel_load $kernel_start_sd" \
- " $kernel_size_sd && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \
- " cp.b $kernel_start $kernel_load" \
- " $kernel_size && bootm $kernel_load"
+ "mcmemsize=0x70000000 \0" \
+ "BOARD=ls1088aqds\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ BOOTENV \
+ "boot_scripts=ls1088aqds_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088aqds_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr}; "\
+ "env exists secureboot " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "qspi_bootcmd=echo Trying load from qspi..; " \
+ "sf probe 0:0; " \
+ "sf read 0x80001000 0xd00000 0x100000; " \
+ "fsl_mc lazyapply dpl 0x80001000 && " \
+ "sf read $kernel_load $kernel_start " \
+ "$kernel_size && bootm $kernel_load#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..; " \
+ "mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
+ "fsl_mc lazyapply dpl 0x80001000 && " \
+ "mmc read $kernel_load $kernel_start_sd " \
+ "$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
+ "nor_bootcmd=echo Trying load from nor..; " \
+ "fsl_mc lazyapply dpl 0x580d00000 && " \
+ "cp.b $kernel_start $kernel_load " \
+ "$kernel_size && bootm $kernel_load#$BOARD\0"
#else
#if defined(CONFIG_QSPI_BOOT)
#undef CONFIG_EXTRA_ENV_SETTINGS
@@ -510,6 +538,15 @@
#endif /* CONFIG_TFABOOT */
#endif /* CONFIG_NXP_ESBC */
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#endif
+
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_FSL_MEMAC
#define CONFIG_PHYLIB
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 88da69f..e93faab 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -383,7 +383,30 @@
"kernelheader_size=0x40000\0" \
"BOARD=ls2088aqds\0" \
"mcmemsize=0x70000000 \0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
IFC_MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls2088aqds_boot.scr\0" \
+ "boot_script_hdr=hdr_ls2088aqds_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
"nor_bootcmd=echo Trying load from nor..;" \
"cp.b $kernel_addr $load_addr " \
"$kernel_size ; env exists secureboot && " \
@@ -429,6 +452,13 @@
#endif /* CONFIG_NXP_ESBC */
#ifdef CONFIG_TFABOOT
+#define BOOT_TARGET_DEVICES(func) \
+ func(USB, usb, 0) \
+ func(MMC, mmc, 0) \
+ func(SCSI, scsi, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
#define SD_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
"&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
@@ -436,14 +466,14 @@
"env exists mcinitcmd && run mcinitcmd " \
"&& mmc read 0x80d00000 0x6800 0x800 " \
"&& fsl_mc lazyapply dpl 0x80d00000; " \
- "run sd_bootcmd; " \
+ "run distro_bootcmd;run sd_bootcmd; " \
"env exists secureboot && esbc_halt;"
#define IFC_NOR_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
"&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
"&& fsl_mc lazyapply dpl 0x580d00000;" \
- "run nor_bootcmd; " \
+ "run distro_bootcmd;run nor_bootcmd; " \
"env exists secureboot && esbc_halt;"
#endif
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 373daeb..d47abf6 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -187,11 +187,15 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
/* Initial environment variables */
-#define XSPI_MC_INIT_CMD \
- "env exists secureboot && " \
- "esbc_validate 0x20640000 && " \
- "esbc_validate 0x20680000 ;" \
- "fsl_mc start mc 0x20a00000 0x20e00000\0"
+#define XSPI_MC_INIT_CMD \
+ "sf probe 0:0 && " \
+ "sf read 0x80640000 0x640000 0x80000 && " \
+ "env exists secureboot && " \
+ "esbc_validate 0x80640000 && " \
+ "esbc_validate 0x80680000; " \
+ "sf read 0x80a00000 0xa00000 0x300000 && " \
+ "sf read 0x80e00000 0xe00000 0x100000; " \
+ "fsl_mc start mc 0x80a00000 0x80e00000\0"
#define SD_MC_INIT_CMD \
"mmc read 0x80a00000 0x5000 0x1200;" \
@@ -249,10 +253,13 @@
"source ${scriptaddr}\0"
#define XSPI_NOR_BOOTCOMMAND \
- "env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x206C0000; " \
+ "sf probe 0:0; " \
+ "sf read 0x806c0000 0x6c0000 0x40000; " \
+ "env exists mcinitcmd && env exists secureboot" \
+ " && esbc_validate 0x806c0000; " \
+ "sf read 0x80d00000 0xd00000 0x100000; " \
"env exists mcinitcmd && " \
- "fsl_mc lazyapply dpl 0x20d00000; " \
+ "fsl_mc lazyapply dpl 0x80d00000; " \
"run distro_bootcmd;run xspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
@@ -266,10 +273,22 @@
"run distro_bootcmd;run sd_bootcmd;" \
"env exists secureboot && esbc_halt;"
+#define SD2_BOOTCOMMAND \
+ "env exists mcinitcmd && mmcinfo; " \
+ "mmc read 0x80d00000 0x6800 0x800; " \
+ "env exists mcinitcmd && env exists secureboot " \
+ " && mmc read 0x80780000 0x3C00 0x20 " \
+ "&& esbc_validate 0x80780000;env exists mcinitcmd " \
+ "&& fsl_mc lazyapply dpl 0x80d00000;" \
+ "run distro_bootcmd;run sd2_bootcmd;" \
+ "env exists secureboot && esbc_halt;"
+
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0) \
func(MMC, mmc, 0) \
- func(SCSI, scsi, 0)
+ func(MMC, mmc, 1) \
+ func(SCSI, scsi, 0) \
+ func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#endif /* __LX2_COMMON_H */
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 1eb63d8..3dd071f 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -121,7 +121,6 @@
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
- "lx2160aqds_vdd_mv=800\0" \
"boot_scripts=lx2160aqds_boot.scr\0" \
"boot_script_hdr=hdr_lx2160aqds_bs.out\0" \
"BOARD=lx2160aqds\0" \
@@ -137,6 +136,13 @@
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$BOARD\0" \
+ "sd2_bootcmd=echo Trying load from emmc card..;" \
+ "mmc dev 1; mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "env exists secureboot && mmc read $kernelheader_addr_r "\
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
#include <asm/fsl_secure_boot.h>
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 82d49e5..f54edf3 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -93,7 +93,6 @@
EXTRA_ENV_SETTINGS \
"boot_scripts=lx2160ardb_boot.scr\0" \
"boot_script_hdr=hdr_lx2160ardb_bs.out\0" \
- "lx2160ardb_vdd_mv=800\0" \
"BOARD=lx2160ardb\0" \
"xspi_bootcmd=echo Trying load from flexspi..;" \
"sf probe 0:0 && sf read $load_addr " \
@@ -107,6 +106,13 @@
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$BOARD\0" \
+ "sd2_bootcmd=echo Trying load from emmc card..;" \
+ "mmc dev 1; mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "env exists secureboot && mmc read $kernelheader_addr_r "\
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
#include <asm/fsl_secure_boot.h>