ARM: uniphier: support USB boot mode for ProXstream2 / PH1-LD6b SoC
The USB boot code is too fat and complicated to be included in SPL
(at least for now). So, it was implemented as a separate project
(what we call USB-loader).
The expected boot sequence is as follows:
Boot ROM -> USB-loader -> SPL -> U-Boot proper
The USB-loader loads the SPL and U-Boot proper from a USB memory
onto the locked L2 cache. Then, SPL needs to copy the U-Boot proper
to DRAM, so this mode looks like a NOR boot from the view of SPL.
However, we want to distinguish between (genuine) NOR boot and USB
boot in some places.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-device.h b/arch/arm/mach-uniphier/boot-mode/boot-device.h
index 2ab5a53..1c59aaa 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-device.h
+++ b/arch/arm/mach-uniphier/boot-mode/boot-device.h
@@ -22,4 +22,6 @@
void ph1_pro5_boot_mode_show(void);
void proxstream2_boot_mode_show(void);
+u32 spl_boot_device_raw(void);
+
#endif /* _ASM_BOOT_DEVICE_H_ */
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
index 3769ec5..1b0c183 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
@@ -55,6 +55,9 @@
{
int boot_mode;
+ if (readl(SG_PINMON0) & BIT(6))
+ return BOOT_DEVICE_USB;
+
boot_mode = get_boot_mode_sel();
return boot_device_table[boot_mode].type;
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
index 0c5749b..935e551 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
@@ -11,7 +11,7 @@
#include "../soc-info.h"
#include "boot-device.h"
-u32 spl_boot_device(void)
+u32 spl_boot_device_raw(void)
{
if (boot_is_swapped())
return BOOT_DEVICE_NOR;
@@ -43,3 +43,12 @@
return BOOT_DEVICE_NONE;
}
}
+
+u32 spl_boot_device(void)
+{
+ u32 ret;
+
+ ret = spl_boot_device_raw();
+
+ return ret == BOOT_DEVICE_USB ? BOOT_DEVICE_NOR : ret;
+}