ARM: board: udoo_neo: Import UDOO Neo dts files
Import the i.MX6SX based UDOO Neo dts files from Linux 5.12-rc1
and sync the i.MX6SX pinfunc.h
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/arch/arm/dts/imx6sx-udoo-neo.dtsi b/arch/arm/dts/imx6sx-udoo-neo.dtsi
new file mode 100644
index 0000000..ee64565
--- /dev/null
+++ b/arch/arm/dts/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+ compatible = "fsl,imx6sx";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ label = "udoo-neo:red:mmc";
+ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+
+ orange {
+ label = "udoo-neo:orange:user";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ reg_sdio_pwr: regulator-sdio-pwr {
+ compatible = "regulator-fixed";
+ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "SDIO_PWR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_otg1_reg>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_otg2_reg>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-reset-duration = <10>;
+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 { /* Brick snap in sensors connector */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c4 { /* Onboard Motion sensors */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ clock-frequency = <100000>;
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_bt_reg: btreggrp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins =
+ <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
+ <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>,
+ <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>,
+ <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>,
+ <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>,
+ <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>,
+
+ <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>,
+ <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>,
+ <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>,
+ <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>,
+ <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>,
+ <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>,
+
+ <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>,
+ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>,
+ <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins =
+ <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
+ <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
+ <MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1>,
+ <MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1>;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins =
+ <MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x13059>,
+ <MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x13059>,
+ <MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x13059>,
+ <MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x13059>;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins =
+ <MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x1b0b1>,
+ <MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x1b0b1>;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins =
+ <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x1b0b1>;
+ };
+
+ pinctrl_otg1_reg: otg1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
+ };
+
+
+ pinctrl_otg2_reg: otg2grp {
+ fsl,pins =
+ <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
+ <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
+ };
+
+ pinctrl_usb_otg2: usbot2ggrp {
+ fsl,pins =
+ <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins =
+ <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
+ <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>,
+ <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>,
+ <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>,
+ <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>,
+ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
+ <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x15059>,
+ <MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x13059>,
+ <MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069>,
+ <MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069>,
+ <MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069>,
+ <MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069>,
+ <MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069>,
+ <MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>,
+ <MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "disabled";
+};
+
+&uart3 { /* Bluetooth - only on Extended/Full versions */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "disabled";
+
+ bluetooth {
+ compatible = "ti,wl1831-st";
+ enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_reg>;
+ max-speed = <921600>;
+ };
+};
+
+/* Arduino serial */
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "disabled";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&usbotg1 { /* J2 micro USB port */
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ status = "okay";
+};
+
+&usbotg2 { /* J3 host USB port */
+ vbus-supply = <®_usb_otg2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <®_sdio_pwr>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&usdhc3 { /* Wi-Fi */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ wakeup-source;
+ keep-power-in-suspend;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1831";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ ref-clock-frequency = <38400000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};