Merge branch 'master' of git://git.denx.de/u-boot-socfpga
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a985c5d..edc84a5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -149,6 +149,7 @@
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
+ socfpga_arria10_socdk_sdmmc.dtb \
socfpga_arria5_socdk.dtb \
socfpga_cyclone5_is1.dtb \
socfpga_cyclone5_mcvevk.dtb \
diff --git a/arch/arm/dts/socfpga_arria10.dtsi b/arch/arm/dts/socfpga_arria10.dtsi
new file mode 100644
index 0000000..377700d
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10.dtsi
@@ -0,0 +1,869 @@
+/*
+ * Copyright Altera Corporation (C) 2014-2017. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: intc@ffffd000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xffffd000 0x1000>,
+ <0xffffc100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@ffda1000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffda1000 0x1000>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+ <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>,
+ <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>,
+ <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>,
+ <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&l4_main_clk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ clkmgr@ffd04000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd04000 0x1000>;
+ reg-names = "soc_clock_manager_OCP_SLV";
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ cb_intosc_ls_clk: cb_intosc_ls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_free_clk: f2s_free_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ main_pll: main_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>;
+ reg = <0x40>;
+
+ main_mpu_base_clk: main_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x140 0 11>;
+ };
+
+ main_noc_base_clk: main_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x144 0 11>;
+ };
+
+ main_emaca_clk: main_emaca_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x68>;
+ };
+
+ main_emacb_clk: main_emacb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x6C>;
+ };
+
+ main_emac_ptp_clk: main_emac_ptp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x70>;
+ };
+
+ main_gpio_db_clk: main_gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x74>;
+ };
+
+ main_sdmmc_clk: main_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x78>;
+ };
+
+ main_s2f_usr0_clk: main_s2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x7C>;
+ };
+
+ main_s2f_usr1_clk: main_s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x80>;
+ };
+
+ main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x84>;
+ };
+
+ main_periph_ref_clk: main_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x9C>;
+ };
+ };
+
+ periph_pll: periph_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>, <&main_periph_ref_clk>;
+ reg = <0xC0>;
+
+ peri_mpu_base_clk: peri_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x140 16 11>;
+ };
+
+ peri_noc_base_clk: peri_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x144 16 11>;
+ };
+
+ peri_emaca_clk: peri_emaca_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xE8>;
+ };
+
+ peri_emacb_clk: peri_emacb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xEC>;
+ };
+
+ peri_emac_ptp_clk: peri_emac_ptp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF0>;
+ };
+
+ peri_gpio_db_clk: peri_gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF4>;
+ };
+
+ peri_sdmmc_clk: peri_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF8>;
+ };
+
+ peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xFC>;
+ };
+
+ peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x100>;
+ };
+
+ peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x104>;
+ };
+ };
+
+ mpu_free_clk: mpu_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x60>;
+ };
+
+ noc_free_clk: noc_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x64>;
+ };
+
+ s2f_user1_free_clk: s2f_user1_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x104>;
+ };
+
+ sdmmc_free_clk: sdmmc_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ fixed-divider = <4>;
+ reg = <0xF8>;
+ };
+
+ l4_sys_free_clk: l4_sys_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&noc_free_clk>;
+ fixed-divider = <4>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 0 2>;
+ clk-gate = <0x48 1>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 8 2>;
+ clk-gate = <0x48 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 16 2>;
+ clk-gate = <0x48 3>;
+ };
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&mpu_free_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0x48 0>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&sdmmc_free_clk>;
+ clk-gate = <0xC8 5>;
+ clk-phase = <0 135>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 11>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 9>;
+ };
+
+ usb_clk: usb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 8>;
+ };
+
+ s2f_usr1_clk: s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&peri_s2f_usr1_clk>;
+ clk-gate = <0xC8 6>;
+ };
+ };
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
+ resets = <&rst EMAC1_RESET>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02900 0x100>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02a00 0x100>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02b00 0x100>;
+ status = "disabled";
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <27>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ fpga_mgr: fpga-mgr@ffd03000 {
+ compatible = "altr,socfpga-a10-fpga-mgr";
+ reg = <0xffd03000 0x100
+ 0xffcfe400 0x20>;
+ clocks = <&l4_mp_clk>;
+ resets = <&rst FPGAMGR_RESET>;
+ reset-names = "fpgamgr";
+ };
+
+ i2c0: i2c@ffc02200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02200 0x100>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02300 0x100>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02400 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02500 0x100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02600 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ sdr: sdr@0xffcfb100 {
+ compatible = "syscon";
+ reg = <0xffcfb100 0x80>;
+ };
+
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x100>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ tx-dma-channel = <&pdma 16>;
+ rx-dma-channel = <&pdma 17>;
+ clocks = <&spi_m_clk>;
+ status = "disabled";
+ };
+
+ spi1: spi@ffda5000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda5000 0x100>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ tx-dma-channel = <&pdma 20>;
+ rx-dma-channel = <&pdma 21>;
+ clocks = <&spi_m_clk>;
+ status = "disabled";
+ };
+
+ L2: l2-cache@fffff000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffff000 0x1000>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ mmc: dwmmc0@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <0x400>;
+ bus-width = <4>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x40000>;
+ };
+
+ eccmgr: eccmgr@ffd06000 {
+ compatible = "altr,socfpga-a10-ecc-manager";
+ altr,sysmgr-syscon = <&sysmgr>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ sdramedac {
+ compatible = "altr,sdram-edac-a10";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ l2-ecc@ffd06010 {
+ compatible = "altr,socfpga-a10-l2-ecc";
+ reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram-ecc@ff8c3000 {
+ compatible = "altr,socfpga-a10-ocram-ecc";
+ reg = <0xff8c3000 0x400>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdmmca-ecc@ff8c2c00 {
+ compatible = "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c2c00 0x400>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-rx-ecc@ff8c0800 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0800 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0c00 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0c00 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma-ecc@ff8c8000 {
+ compatible = "altr,socfpga-dma-ecc";
+ reg = <0xff8c8000 0x400>;
+ altr,ecc-parent = <&pdma>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb0-ecc@ff8c8800 {
+ compatible = "altr,socfpga-usb-ecc";
+ reg = <0xff8c8800 0x400>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ qspi: qspi@ff809000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cadence,qspi";
+ reg = <0xff809000 0x100>,
+ <0xffa00000 0x100000>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_main_clk>;
+ ext-decoder = <0>; /* external decoder */
+ num-chipselect = <4>;
+ fifo-depth = <128>;
+ sram-size = <512>;
+ bus-num = <2>;
+ status = "disabled";
+ };
+
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x100>;
+ altr,modrst-offset = <0x20>;
+ };
+
+ scu: snoop-control-unit@ffffc000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xffffc000 0x100>;
+ };
+
+ sysmgr: sysmgr@ffd06000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd06000 0x300>;
+ cpu1-start-addr = <0xffd06230>;
+ };
+
+ /* Local timer */
+ timer@ffffc600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xffffc600 0x100>;
+ interrupts = <1 13 0xf04>;
+ clocks = <&mpu_periph_clk>;
+ };
+
+ timer0: timer0@ffc02700 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffc02700 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ };
+
+ timer1: timer1@ffc02800 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffc02800 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffd00000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffd01000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial1@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0xffff>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
+ resets = <&rst USB0_RESET>;
+ reset-names = "dwc2";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0xffff>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
+ resets = <&rst USB1_RESET>;
+ reset-names = "dwc2";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 0000000..b573d0e
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2015-2017 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk_sdmmc_handoff.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+};
+
+&uart1 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&mmc {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ num-slots = <1>;
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+};
diff --git a/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi b/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi
new file mode 100644
index 0000000..d10e089
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10_socdk_sdmmc_handoff.dtsi
@@ -0,0 +1,481 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0 X11
+ *
+ *<auto-generated>
+ * This code was generated by a tool based on
+ * handoffs from both Qsys and Quartus.
+ *
+ * Changes to this file may be lost if
+ * the code is regenerated.
+ *</auto-generated>
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Arria 10";
+ compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+ chosen {
+ /* Bootloader setting: uboot.rbf_filename */
+ cff-file = "ghrd_10as066n2.periph.rbf";
+ early-release-fpga-config;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ clkmgr@ffd04000 {
+ u-boot,dm-pre-reloc;
+ clocks {
+ u-boot,dm-pre-reloc;
+ osc1 {
+ u-boot,dm-pre-reloc;
+ clock-frequency = <25000000>;
+ clock-output-names = "altera_arria10_hps_eosc1-clk";
+ };
+
+ cb_intosc_ls_clk {
+ u-boot,dm-pre-reloc;
+ clock-frequency = <60000000>;
+ clock-output-names = "altera_arria10_hps_cb_intosc_ls-clk";
+ };
+
+ f2s_free_clk {
+ u-boot,dm-pre-reloc;
+ clock-frequency = <200000000>;
+ clock-output-names = "altera_arria10_hps_f2h_free-clk";
+ };
+
+ main_pll {
+ u-boot,dm-pre-reloc;
+ /*
+ * Address Block: soc_clock_manager_OCP_SLV.
+ * i_clk_mgr_mainpllgrp
+ */
+ altr,of_reg_value = <
+ 0 /* Field: vco0.psrc */
+ 1 /* Field: vco1.denom */
+ 191 /* Field: vco1.numer */
+ 0 /* Field: mpuclk */
+ 0 /* Field: mpuclk.cnt */
+ 0 /* Field: mpuclk.src */
+ 0 /* Field: nocclk */
+ 0 /* Field: nocclk.cnt */
+ 0 /* Field: nocclk.src */
+ 900 /* Field: cntr2clk.cnt */
+ 900 /* Field: cntr3clk.cnt */
+ 900 /* Field: cntr4clk.cnt */
+ 900 /* Field: cntr5clk.cnt */
+ 900 /* Field: cntr6clk.cnt */
+ 900 /* Field: cntr7clk.cnt */
+ 0 /* Field: cntr7clk.src */
+ 900 /* Field: cntr8clk.cnt */
+ 900 /* Field: cntr9clk.cnt */
+ 0 /* Field: cntr9clk.src */
+ 900 /* Field: cntr15clk.cnt */
+ 0 /* Field: nocdiv.l4mainclk */
+ 0 /* Field: nocdiv.l4mpclk */
+ 2 /* Field: nocdiv.l4spclk */
+ 0 /* Field: nocdiv.csatclk */
+ 1 /* Field: nocdiv.cstraceclk */
+ 1 /* Field: nocdiv.cspdbgclk */
+ >;
+ };
+
+ periph_pll {
+ u-boot,dm-pre-reloc;
+ /*
+ * Address Block: soc_clock_manager_OCP_SLV.
+ * i_clk_mgr_perpllgrp
+ */
+ altr,of_reg_value = <
+ 0 /* Field: vco0.psrc */
+ 1 /* Field: vco1.denom */
+ 159 /* Field: vco1.numer */
+ 7 /* Field: cntr2clk.cnt */
+ 1 /* Field: cntr2clk.src */
+ 900 /* Field: cntr3clk.cnt */
+ 1 /* Field: cntr3clk.src */
+ 19 /* Field: cntr4clk.cnt */
+ 1 /* Field: cntr4clk.src */
+ 499 /* Field: cntr5clk.cnt */
+ 1 /* Field: cntr5clk.src */
+ 9 /* Field: cntr6clk.cnt */
+ 1 /* Field: cntr6clk.src */
+ 900 /* Field: cntr7clk.cnt */
+ 900 /* Field: cntr8clk.cnt */
+ 0 /* Field: cntr8clk.src */
+ 900 /* Field: cntr9clk.cnt */
+ 0 /* Field: emacctl.emac0sel */
+ 0 /* Field: emacctl.emac1sel */
+ 0 /* Field: emacctl.emac2sel */
+ 32000 /* Field: gpiodiv.gpiodbclk */
+ >;
+ };
+
+ altera {
+ u-boot,dm-pre-reloc;
+ /*
+ * Address Block: soc_clock_manager_OCP_SLV.
+ * i_clk_mgr_alteragrp
+ */
+ altr,of_reg_value = <
+ 0x0384000b /* Register: nocclk */
+ 0x03840001 /* Register: mpuclk */
+ >;
+ };
+ };
+ };
+
+ /*
+ * Driver: altera_arria10_soc_3v_io48_pin_mux_arria10_uboot_driver
+ * Binding: pinmux
+ */
+ i_io48_pin_mux: pinmux@0xffd07000 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "pinctrl-single";
+ reg = <0xffd07000 0x00000800>;
+ reg-names = "soc_3v_io48_pin_mux_OCP_SLV";
+
+ /*
+ * Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+ * i_io48_pin_mux_shared_3v_io_grp
+ */
+ shared {
+ u-boot,dm-pre-reloc;
+ reg = <0xffd07000 0x00000200>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000000f>;
+ pinctrl-single,pins =
+ /* Reg: pinmux_shared_io_q1_1 */
+ <0x00000000 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_2 */
+ <0x00000004 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_3 */
+ <0x00000008 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_4 */
+ <0x0000000c 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_5 */
+ <0x00000010 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_6 */
+ <0x00000014 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_7 */
+ <0x00000018 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_8 */
+ <0x0000001c 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_9 */
+ <0x00000020 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_10 */
+ <0x00000024 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_11 */
+ <0x00000028 0x00000008>,
+ /* Reg: pinmux_shared_io_q1_12 */
+ <0x0000002c 0x00000008>,
+ /* Reg: pinmux_shared_io_q2_1 */
+ <0x00000030 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_2 */
+ <0x00000034 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_3 */
+ <0x00000038 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_4 */
+ <0x0000003c 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_5 */
+ <0x00000040 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_6 */
+ <0x00000044 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_7 */
+ <0x00000048 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_8 */
+ <0x0000004c 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_9 */
+ <0x00000050 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_10 */
+ <0x00000054 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_11 */
+ <0x00000058 0x00000004>,
+ /* Reg: pinmux_shared_io_q2_12 */
+ <0x0000005c 0x00000004>,
+ /* Reg: pinmux_shared_io_q3_1 */
+ <0x00000060 0x00000003>,
+ /* Reg: pinmux_shared_io_q3_2 */
+ <0x00000064 0x00000003>,
+ /* Reg: pinmux_shared_io_q3_3 */
+ <0x00000068 0x00000003>,
+ /* Reg: pinmux_shared_io_q3_4 */
+ <0x0000006c 0x00000003>,
+ /* Reg: pinmux_shared_io_q3_5 */
+ <0x00000070 0x00000003>,
+ /* Reg: pinmux_shared_io_q3_6 */
+ <0x00000074 0x0000000f>,
+ /* Reg: pinmux_shared_io_q3_7 */
+ <0x00000078 0x0000000a>,
+ /* Reg: pinmux_shared_io_q3_8 */
+ <0x0000007c 0x0000000a>,
+ /* Reg: pinmux_shared_io_q3_9 */
+ <0x00000080 0x0000000a>,
+ /* Reg: pinmux_shared_io_q3_10 */
+ <0x00000084 0x0000000a>,
+ /* Reg: pinmux_shared_io_q3_11 */
+ <0x00000088 0x00000001>,
+ /* Reg: pinmux_shared_io_q3_12 */
+ <0x0000008c 0x00000001>,
+ /* Reg: pinmux_shared_io_q4_1 */
+ <0x00000090 0x00000000>,
+ /* Reg: pinmux_shared_io_q4_2 */
+ <0x00000094 0x00000000>,
+ /* Reg: pinmux_shared_io_q4_3 */
+ <0x00000098 0x0000000f>,
+ /* Reg: pinmux_shared_io_q4_4 */
+ <0x0000009c 0x0000000c>,
+ /* Reg: pinmux_shared_io_q4_5 */
+ <0x000000a0 0x0000000f>,
+ /* Reg: pinmux_shared_io_q4_6 */
+ <0x000000a4 0x0000000f>,
+ /* Reg: pinmux_shared_io_q4_7 */
+ <0x000000a8 0x0000000a>,
+ /* Reg: pinmux_shared_io_q4_8 */
+ <0x000000ac 0x0000000a>,
+ /* Reg: pinmux_shared_io_q4_9 */
+ <0x000000b0 0x0000000c>,
+ /* Reg: pinmux_shared_io_q4_10 */
+ <0x000000b4 0x0000000c>,
+ /* Reg: pinmux_shared_io_q4_11 */
+ <0x000000b8 0x0000000c>,
+ /* Reg: pinmux_shared_io_q4_12 */
+ <0x000000bc 0x0000000c>;
+ };
+
+ /*
+ * Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+ * i_io48_pin_mux_dedicated_io_grp
+ */
+ dedicated {
+ u-boot,dm-pre-reloc;
+ reg = <0xffd07200 0x00000200>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000000f>;
+ pinctrl-single,pins =
+ /* Reg: pinmux_dedicated_io_4 */
+ <0x0000000c 0x00000008>,
+ /* Reg: pinmux_dedicated_io_5 */
+ <0x00000010 0x00000008>,
+ /* Reg: pinmux_dedicated_io_6 */
+ <0x00000014 0x00000008>,
+ /* Regi: pinmux_dedicated_io_7 */
+ <0x00000018 0x00000008>,
+ /* Reg: pinmux_dedicated_io_8 */
+ <0x0000001c 0x00000008>,
+ /* Reg: pinmux_dedicated_io_9 */
+ <0x00000020 0x00000008>,
+ /* Reg: pinmux_dedicated_io_10 */
+ <0x00000024 0x0000000a>,
+ /* Reg: pinmux_dedicated_io_11 */
+ <0x00000028 0x0000000a>,
+ /* Reg: pinmux_dedicated_io_12 */
+ <0x0000002c 0x00000008>,
+ /* Reg: pinmux_dedicated_io_13 */
+ <0x00000030 0x00000008>,
+ /* Reg: pinmux_dedicated_io_14 */
+ <0x00000034 0x00000008>,
+ /* Reg: pinmux_dedicated_io_15 */
+ <0x00000038 0x00000008>,
+ /* Reg: pinmux_dedicated_io_16 */
+ <0x0000003c 0x0000000d>,
+ /* Reg: pinmux_dedicated_io_17 */
+ <0x00000040 0x0000000d>;
+ };
+
+ /*
+ * Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+ * i_io48_pin_mux_dedicated_io_grp
+ */
+ dedicated_cfg {
+ u-boot,dm-pre-reloc;
+ reg = <0xffd07200 0x00000200>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x003f3f3f>;
+ pinctrl-single,pins =
+ /* Reg: cfg_dedicated_io_bank */
+ <0x00000100 0x00000101>,
+ /* Reg: cfg_dedicated_io_1 */
+ <0x00000104 0x000b080a>,
+ /* Reg: cfg_dedicated_io_2 */
+ <0x00000108 0x000b080a>,
+ /* Reg: cfg_dedicated_io_3 */
+ <0x0000010c 0x000b080a>,
+ /* Reg: cfg_dedicated_io_4 */
+ <0x00000110 0x000a282a>,
+ /* Reg: cfg_dedicated_io_5 */
+ <0x00000114 0x000a282a>,
+ /* Reg: cfg_dedicated_io_6 */
+ <0x00000118 0x0008282a>,
+ /* Reg: cfg_dedicated_io_7 */
+ <0x0000011c 0x000a282a>,
+ /* Reg: cfg_dedicated_io_8 */
+ <0x00000120 0x000a282a>,
+ /* Reg: cfg_dedicated_io_9 */
+ <0x00000124 0x000a282a>,
+ /* Reg: cfg_dedicated_io_10 */
+ <0x00000128 0x00090000>,
+ /* Reg: cfg_dedicated_io_11 */
+ <0x0000012c 0x00090000>,
+ /* Reg: cfg_dedicated_io_12 */
+ <0x00000130 0x000b282a>,
+ /* Reg: cfg_dedicated_io_13 */
+ <0x00000134 0x000b282a>,
+ /* Reg: cfg_dedicated_io_14 */
+ <0x00000138 0x000b282a>,
+ /* Reg: cfg_dedicated_io_15 */
+ <0x0000013c 0x000b282a>,
+ /* Reg: cfg_dedicated_io_16 */
+ <0x00000140 0x0008282a>,
+ /* Reg: cfg_dedicated_io_17 */
+ <0x00000144 0x000a282a>;
+ };
+
+ /*
+ * Address Block: soc_3v_io48_pin_mux_OCP_SLV.
+ * i_io48_pin_mux_fpga_interface_grp
+ */
+ fpga {
+ u-boot,dm-pre-reloc;
+ reg = <0xffd07400 0x00000100>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x00000001>;
+ pinctrl-single,pins =
+ /* Reg: pinmux_emac0_usefpga */
+ <0x00000000 0x00000000>,
+ /* Reg: pinmux_emac1_usefpga */
+ <0x00000004 0x00000000>,
+ /* Reg: pinmux_emac2_usefpga */
+ <0x00000008 0x00000000>,
+ /* Reg: pinmux_i2c0_usefpga */
+ <0x0000000c 0x00000000>,
+ /* Reg: pinmux_i2c1_usefpga */
+ <0x00000010 0x00000000>,
+ /* Reg: pinmux_i2c_emac0_usefpga */
+ <0x00000014 0x00000000>,
+ /* Reg: pinmux_i2c_emac1_usefpga */
+ <0x00000018 0x00000000>,
+ /* Reg: pinmux_i2c_emac2_usefpga */
+ <0x0000001c 0x00000000>,
+ /* Reg: pinmux_nand_usefpga */
+ <0x00000020 0x00000000>,
+ /* Reg: pinmux_qspi_usefpga */
+ <0x00000024 0x00000000>,
+ /* Reg: pinmux_sdmmc_usefpga */
+ <0x00000028 0x00000000>,
+ /* Reg: pinmux_spim0_usefpga */
+ <0x0000002c 0x00000000>,
+ /* Reg: pinmux_spim1_usefpga */
+ <0x00000030 0x00000000>,
+ /* Reg: pinmux_spis0_usefpga */
+ <0x00000034 0x00000000>,
+ /* Reg: pinmux_spis1_usefpga */
+ <0x00000038 0x00000000>,
+ /* Reg: pinmux_uart0_usefpga */
+ <0x0000003c 0x00000000>,
+ /* Reg: pinmux_uart1_usefpga */
+ <0x00000040 0x00000000>;
+ };
+ };
+
+ i_noc: noc@0xffd10000 {
+ u-boot,dm-pre-reloc;
+ compatible = "altr,socfpga-a10-noc";
+ reg = <0xffd10000 0x00008000>;
+ reg-names = "mpu_m0";
+
+ firewall {
+ u-boot,dm-pre-reloc;
+ /*
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * mpuregion0addr.base
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * mpuregion0addr.limit
+ */
+ altr,mpu0 = <0x00000000 0x0000ffff>;
+ /*
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.noc_fw_ddr_l3_ddr_scr.
+ * hpsregion0addr.base
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.noc_fw_ddr_l3_ddr_scr.
+ * hpsregion0addr.limit
+ */
+ altr,l3-0 = <0x00000000 0x0000ffff>;
+ /*
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * fpga2sdram0region0addr.base
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * fpga2sdram0region0addr.limit
+ */
+ altr,fpga2sdram0-0 = <0x00000000 0x0000ffff>;
+ /*
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * fpga2sdram1region0addr.base
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * fpga2sdram1region0addr.limit
+ */
+ altr,fpga2sdram1-0 = <0x00000000 0x0000ffff>;
+ /*
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * fpga2sdram2region0addr.base
+ * Driver setting: altera_arria10_soc_noc_arria10_uboot_driver.
+ * I_NOC.mpu_m0.
+ * noc_fw_ddr_mpu_fpga2sdram_ddr_scr.
+ * fpga2sdram2region0addr.limit
+ */
+ altr,fpga2sdram2-0 = <0x00000000 0x0000ffff>;
+ };
+ };
+
+ hps_fpgabridge0: fpgabridge@0 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ altr,init-val = <1>;
+ };
+
+ hps_fpgabridge1: fpgabridge@1 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ altr,init-val = <1>;
+ };
+
+ hps_fpgabridge2: fpgabridge@2 {
+ compatible = "altr,socfpga-fpga2hps-bridge";
+ altr,init-val = <1>;
+ };
+
+ hps_fpgabridge3: fpgabridge@3 {
+ compatible = "altr,socfpga-fpga2sdram0-bridge";
+ altr,init-val = <1>;
+ };
+
+ hps_fpgabridge4: fpgabridge@4 {
+ compatible = "altr,socfpga-fpga2sdram1-bridge";
+ altr,init-val = <0>;
+ };
+
+ hps_fpgabridge5: fpgabridge@5 {
+ compatible = "altr,socfpga-fpga2sdram2-bridge";
+ altr,init-val = <1>;
+ };
+ };
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index f6e5773..2563e79 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -37,6 +37,9 @@
bool
select TARGET_SOCFPGA_GEN5
+config TARGET_SOCFPGA_ARRIA10
+ bool
+
config TARGET_SOCFPGA_CYCLONE5
bool
select TARGET_SOCFPGA_GEN5
@@ -49,6 +52,10 @@
prompt "Altera SOCFPGA board select"
optional
+config TARGET_SOCFPGA_ARRIA10_SOCDK
+ bool "Altera SOCFPGA SoCDK (Arria 10)"
+ select TARGET_SOCFPGA_ARRIA10
+
config TARGET_SOCFPGA_ARRIA5_SOCDK
bool "Altera SOCFPGA SoCDK (Arria V)"
select TARGET_SOCFPGA_ARRIA5
@@ -98,6 +105,7 @@
config SYS_BOARD
default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+ default "arria10-socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
@@ -111,6 +119,7 @@
config SYS_VENDOR
default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK
+ default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK
default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
@@ -125,6 +134,7 @@
config SYS_CONFIG_NAME
default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+ default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 809cd47..41b779c 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -2,21 +2,48 @@
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
-# Copyright (C) 2012 Altera Corporation <www.altera.com>
+# Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
- fpga_manager.o board.o
+obj-y += board.o
+obj-y += clock_manager.o
+obj-y += fpga_manager.o
+obj-y += misc.o
+obj-y += reset_manager.o
+obj-y += timer.o
-obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+obj-y += clock_manager_gen5.o
+obj-y += misc_gen5.o
+obj-y += reset_manager_gen5.o
+obj-y += scan_manager.o
+obj-y += system_manager_gen5.o
+obj-y += wrap_pll_config.o
+endif
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+obj-y += clock_manager_arria10.o
+obj-y += misc_arria10.o
+obj-y += pinmux_arria10.o
+obj-y += reset_manager_arria10.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+obj-y += freeze_controller.o
+obj-y += wrap_iocsr_config.o
+obj-y += wrap_pinmux_config.o
+obj-y += wrap_sdram_config.o
+endif
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
# QTS-generated config file wrappers
-obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o
-obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
- wrap_sdram_config.o
CFLAGS_wrap_iocsr_config.o += -I$(srctree)/board/$(BOARDDIR)
CFLAGS_wrap_pinmux_config.o += -I$(srctree)/board/$(BOARDDIR)
CFLAGS_wrap_pll_config.o += -I$(srctree)/board/$(BOARDDIR)
CFLAGS_wrap_sdram_config.o += -I$(srctree)/board/$(BOARDDIR)
+endif
diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c
index 29e18f8..cb6ae03 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager.c
@@ -1,10 +1,11 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <wait_bit.h>
#include <asm/io.h>
#include <asm/arch/clock_manager.h>
@@ -13,12 +14,17 @@
static const struct socfpga_clock_manager *clock_manager_base =
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
-static void cm_wait_for_lock(uint32_t mask)
+void cm_wait_for_lock(u32 mask)
{
- register uint32_t inter_val;
- uint32_t retry = 0;
+ u32 inter_val;
+ u32 retry = 0;
do {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
inter_val = readl(&clock_manager_base->inter) & mask;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ inter_val = readl(&clock_manager_base->stat) & mask;
+#endif
+ /* Wait for stable lock */
if (inter_val == mask)
retry++;
else
@@ -29,512 +35,12 @@
}
/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
+int cm_wait_for_fsm(void)
{
- while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
- ;
+ return wait_for_bit(__func__, (const u32 *)&clock_manager_base->stat,
+ CLKMGR_STAT_BUSY, false, 20000, false);
}
-/*
- * function to write the bypass register which requires a poll of the
- * busy bit
- */
-static void cm_write_bypass(uint32_t val)
-{
- writel(val, &clock_manager_base->bypass);
- cm_wait_for_fsm();
-}
-
-/* function to write the ctrl register which requires a poll of the busy bit */
-static void cm_write_ctrl(uint32_t val)
-{
- writel(val, &clock_manager_base->ctrl);
- cm_wait_for_fsm();
-}
-
-/* function to write a clock register that has phase information */
-static void cm_write_with_phase(uint32_t value,
- uint32_t reg_address, uint32_t mask)
-{
- /* poll until phase is zero */
- while (readl(reg_address) & mask)
- ;
-
- writel(value, reg_address);
-
- while (readl(reg_address) & mask)
- ;
-}
-
-/*
- * Setup clocks while making no assumptions about previous state of the clocks.
- *
- * Start by being paranoid and gate all sw managed clocks
- * Put all plls in bypass
- * Put all plls VCO registers back to reset value (bandgap power down).
- * Put peripheral and main pll src to reset value to avoid glitch.
- * Delay 5 us.
- * Deassert bandgap power down and set numerator and denominator
- * Start 7 us timer.
- * set internal dividers
- * Wait for 7 us timer.
- * Enable plls
- * Set external dividers while plls are locking
- * Wait for pll lock
- * Assert/deassert outreset all.
- * Take all pll's out of bypass
- * Clear safe mode
- * set source main and peripheral clocks
- * Ungate clocks
- */
-
-void cm_basic_init(const struct cm_config * const cfg)
-{
- unsigned long end;
-
- /* Start by being paranoid and gate all sw managed clocks */
-
- /*
- * We need to disable nandclk
- * and then do another apb access before disabling
- * gatting off the rest of the periperal clocks.
- */
- writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
- readl(&clock_manager_base->per_pll.en),
- &clock_manager_base->per_pll.en);
-
- /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
- writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
- CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
- &clock_manager_base->main_pll.en);
-
- writel(0, &clock_manager_base->sdr_pll.en);
-
- /* now we can gate off the rest of the peripheral clocks */
- writel(0, &clock_manager_base->per_pll.en);
-
- /* Put all plls in bypass */
- cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
- CLKMGR_BYPASS_MAINPLL);
-
- /* Put all plls VCO registers back to reset value. */
- writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->main_pll.vco);
- writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->per_pll.vco);
- writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->sdr_pll.vco);
-
- /*
- * The clocks to the flash devices and the L4_MAIN clocks can
- * glitch when coming out of safe mode if their source values
- * are different from their reset value. So the trick it to
- * put them back to their reset state, and change input
- * after exiting safe mode but before ungating the clocks.
- */
- writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
- &clock_manager_base->per_pll.src);
- writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
- &clock_manager_base->main_pll.l4src);
-
- /* read back for the required 5 us delay. */
- readl(&clock_manager_base->main_pll.vco);
- readl(&clock_manager_base->per_pll.vco);
- readl(&clock_manager_base->sdr_pll.vco);
-
-
- /*
- * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
- * with numerator and denominator.
- */
- writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
- writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
- writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
-
- /*
- * Time starts here. Must wait 7 us from
- * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
- */
- end = timer_get_us() + 7;
-
- /* main mpu */
- writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
-
- /* altera group mpuclk */
- writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
-
- /* main main clock */
- writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
-
- /* main for dbg */
- writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
-
- /* main for cfgs2fuser0clk */
- writel(cfg->cfg2fuser0clk,
- &clock_manager_base->main_pll.cfgs2fuser0clk);
-
- /* Peri emac0 50 MHz default to RMII */
- writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
-
- /* Peri emac1 50 MHz default to RMII */
- writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
-
- /* Peri QSPI */
- writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
-
- writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
-
- /* Peri pernandsdmmcclk */
- writel(cfg->mainnandsdmmcclk,
- &clock_manager_base->main_pll.mainnandsdmmcclk);
-
- writel(cfg->pernandsdmmcclk,
- &clock_manager_base->per_pll.pernandsdmmcclk);
-
- /* Peri perbaseclk */
- writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
-
- /* Peri s2fuser1clk */
- writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
-
- /* 7 us must have elapsed before we can enable the VCO */
- while (timer_get_us() < end)
- ;
-
- /* Enable vco */
- /* main pll vco */
- writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->main_pll.vco);
-
- /* periferal pll */
- writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->per_pll.vco);
-
- /* sdram pll vco */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->sdr_pll.vco);
-
- /* L3 MP and L3 SP */
- writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
-
- writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
-
- writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
-
- /* L4 MP, L4 SP, can0, and can1 */
- writel(cfg->perdiv, &clock_manager_base->per_pll.div);
-
- writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-
-#define LOCKED_MASK \
- (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
- CLKMGR_INTER_PERPLLLOCKED_MASK | \
- CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
- cm_wait_for_lock(LOCKED_MASK);
-
- /* write the sdram clock counters before toggling outreset all */
- writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddrdqsclk);
-
- writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddr2xdqsclk);
-
- writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddrdqclk);
-
- writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
- &clock_manager_base->sdr_pll.s2fuser2clk);
-
- /*
- * after locking, but before taking out of bypass
- * assert/deassert outresetall
- */
- uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
-
- /* assert main outresetall */
- writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->main_pll.vco);
-
- uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
-
- /* assert pheriph outresetall */
- writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->per_pll.vco);
-
- /* assert sdram outresetall */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
- CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
- &clock_manager_base->sdr_pll.vco);
-
- /* deassert main outresetall */
- writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->main_pll.vco);
-
- /* deassert pheriph outresetall */
- writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->per_pll.vco);
-
- /* deassert sdram outresetall */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->sdr_pll.vco);
-
- /*
- * now that we've toggled outreset all, all the clocks
- * are aligned nicely; so we can change any phase.
- */
- cm_write_with_phase(cfg->ddrdqsclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
- CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
-
- /* SDRAM DDR2XDQSCLK */
- cm_write_with_phase(cfg->ddr2xdqsclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
- CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
-
- cm_write_with_phase(cfg->ddrdqclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
- CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
-
- cm_write_with_phase(cfg->s2fuser2clk,
- (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
- CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
-
- /* Take all three PLLs out of bypass when safe mode is cleared. */
- cm_write_bypass(0);
-
- /* clear safe mode */
- cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
-
- /*
- * now that safe mode is clear with clocks gated
- * it safe to change the source mux for the flashes the the L4_MAIN
- */
- writel(cfg->persrc, &clock_manager_base->per_pll.src);
- writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
-
- /* Now ungate non-hw-managed clocks */
- writel(~0, &clock_manager_base->main_pll.en);
- writel(~0, &clock_manager_base->per_pll.en);
- writel(~0, &clock_manager_base->sdr_pll.en);
-
- /* Clear the loss of lock bits (write 1 to clear) */
- writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
- CLKMGR_INTER_MAINPLLLOST_MASK,
- &clock_manager_base->inter);
-}
-
-static unsigned int cm_get_main_vco_clk_hz(void)
-{
- uint32_t reg, clock;
-
- /* get the main VCO clock */
- reg = readl(&clock_manager_base->main_pll.vco);
- clock = cm_get_osc_clk_hz(1);
- clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify PER PLL clock source */
- reg = readl(&clock_manager_base->per_pll.vco);
- reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_per_ref_clk_hz();
-
- /* get the PER VCO clock */
- reg = readl(&clock_manager_base->per_pll.vco);
- clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-unsigned long cm_get_mpu_clk_hz(void)
-{
- uint32_t reg, clock;
-
- clock = cm_get_main_vco_clk_hz();
-
- /* get the MPU clock */
- reg = readl(&clock_manager_base->altera.mpuclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mpuclk);
- clock /= (reg + 1);
- return clock;
-}
-
-unsigned long cm_get_sdram_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify SDRAM PLL clock source */
- reg = readl(&clock_manager_base->sdr_pll.vco);
- reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_sdr_ref_clk_hz();
-
- /* get the SDRAM VCO clock */
- reg = readl(&clock_manager_base->sdr_pll.vco);
- clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- /* get the SDRAM (DDR_DQS) clock */
- reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
- reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
- CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
- clock /= (reg + 1);
-
- return clock;
-}
-
-unsigned int cm_get_l4_sp_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of L4 SP clock */
- reg = readl(&clock_manager_base->main_pll.l4src);
- reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
- CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
-
- if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (main clk) */
- reg = readl(&clock_manager_base->altera.mainclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mainclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
- }
-
- /* get the L4 SP clock which supplied to UART */
- reg = readl(&clock_manager_base->main_pll.maindiv);
- reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
- CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
- clock = clock / (1 << reg);
-
- return clock;
-}
-
-unsigned int cm_get_mmc_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of MMC clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
- CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
- if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
- clock /= (reg + 1);
- }
-
- /* further divide by 4 as we have fixed divider at wrapper */
- clock /= 4;
- return clock;
-}
-
-unsigned int cm_get_qspi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of QSPI clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
- CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
-
- if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the qspi clock */
- reg = readl(&clock_manager_base->main_pll.mainqspiclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the qspi clock */
- reg = readl(&clock_manager_base->per_pll.perqspiclk);
- clock /= (reg + 1);
- }
-
- return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
-
- return clock;
-}
-
-static void cm_print_clock_quick_summary(void)
-{
- printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
- printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
- printf("EOSC1 %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
- printf("EOSC2 %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
- printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
- printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
- printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
- printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
- printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
- printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
-}
-
int set_cpu_clk_info(void)
{
/* Calculate the clock frequencies required for drivers */
@@ -543,7 +49,12 @@
gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
gd->bd->bi_dsp_freq = 0;
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ gd->bd->bi_ddr_freq = 0;
+#endif
return 0;
}
diff --git a/arch/arm/mach-socfpga/clock_manager_arria10.c b/arch/arm/mach-socfpga/clock_manager_arria10.c
new file mode 100644
index 0000000..482b854
--- /dev/null
+++ b/arch/arm/mach-socfpga/clock_manager_arria10.c
@@ -0,0 +1,1096 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 eosc1_hz;
+static u32 cb_intosc_hz;
+static u32 f2s_free_hz;
+static u32 cm_l4_main_clk_hz;
+static u32 cm_l4_sp_clk_hz;
+static u32 cm_l4_mp_clk_hz;
+static u32 cm_l4_sys_free_clk_hz;
+
+struct mainpll_cfg {
+ u32 vco0_psrc;
+ u32 vco1_denom;
+ u32 vco1_numer;
+ u32 mpuclk;
+ u32 mpuclk_cnt;
+ u32 mpuclk_src;
+ u32 nocclk;
+ u32 nocclk_cnt;
+ u32 nocclk_src;
+ u32 cntr2clk_cnt;
+ u32 cntr3clk_cnt;
+ u32 cntr4clk_cnt;
+ u32 cntr5clk_cnt;
+ u32 cntr6clk_cnt;
+ u32 cntr7clk_cnt;
+ u32 cntr7clk_src;
+ u32 cntr8clk_cnt;
+ u32 cntr9clk_cnt;
+ u32 cntr9clk_src;
+ u32 cntr15clk_cnt;
+ u32 nocdiv_l4mainclk;
+ u32 nocdiv_l4mpclk;
+ u32 nocdiv_l4spclk;
+ u32 nocdiv_csatclk;
+ u32 nocdiv_cstraceclk;
+ u32 nocdiv_cspdbclk;
+};
+
+struct perpll_cfg {
+ u32 vco0_psrc;
+ u32 vco1_denom;
+ u32 vco1_numer;
+ u32 cntr2clk_cnt;
+ u32 cntr2clk_src;
+ u32 cntr3clk_cnt;
+ u32 cntr3clk_src;
+ u32 cntr4clk_cnt;
+ u32 cntr4clk_src;
+ u32 cntr5clk_cnt;
+ u32 cntr5clk_src;
+ u32 cntr6clk_cnt;
+ u32 cntr6clk_src;
+ u32 cntr7clk_cnt;
+ u32 cntr8clk_cnt;
+ u32 cntr8clk_src;
+ u32 cntr9clk_cnt;
+ u32 emacctl_emac0sel;
+ u32 emacctl_emac1sel;
+ u32 emacctl_emac2sel;
+ u32 gpiodiv_gpiodbclk;
+};
+
+struct alteragrp_cfg {
+ u32 nocclk;
+ u32 mpuclk;
+};
+
+static const struct socfpga_clock_manager *clock_manager_base =
+ (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
+
+static int of_to_struct(const void *blob, int node, int cfg_len, void *cfg)
+{
+ if (fdtdec_get_int_array(blob, node, "altr,of_reg_value",
+ (u32 *)cfg, cfg_len)) {
+ /* could not find required property */
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int of_get_input_clks(const void *blob, int node, u32 *val)
+{
+ *val = fdtdec_get_uint(blob, node, "clock-frequency", 0);
+ if (!*val)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int of_get_clk_cfg(const void *blob, struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ struct alteragrp_cfg *altrgrp_cfg)
+{
+ int node, child, len;
+ const char *node_name;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_ALTERA_SOCFPGA_CLK);
+ if (node < 0)
+ return -EINVAL;
+
+ child = fdt_first_subnode(blob, node);
+ if (child < 0)
+ return -EINVAL;
+
+ child = fdt_first_subnode(blob, child);
+ if (child < 0)
+ return -EINVAL;
+
+ node_name = fdt_get_name(blob, child, &len);
+
+ while (node_name) {
+ if (!strcmp(node_name, "osc1")) {
+ if (of_get_input_clks(blob, child, &eosc1_hz))
+ return -EINVAL;
+ } else if (!strcmp(node_name, "cb_intosc_ls_clk")) {
+ if (of_get_input_clks(blob, child, &cb_intosc_hz))
+ return -EINVAL;
+ } else if (!strcmp(node_name, "f2s_free_clk")) {
+ if (of_get_input_clks(blob, child, &f2s_free_hz))
+ return -EINVAL;
+ } else if (!strcmp(node_name, "main_pll")) {
+ if (of_to_struct(blob, child,
+ sizeof(*main_cfg)/sizeof(u32),
+ main_cfg))
+ return -EINVAL;
+ } else if (!strcmp(node_name, "periph_pll")) {
+ if (of_to_struct(blob, child,
+ sizeof(*per_cfg)/sizeof(u32),
+ per_cfg))
+ return -EINVAL;
+ } else if (!strcmp(node_name, "altera")) {
+ if (of_to_struct(blob, child,
+ sizeof(*altrgrp_cfg)/sizeof(u32),
+ altrgrp_cfg))
+ return -EINVAL;
+
+ main_cfg->mpuclk = altrgrp_cfg->mpuclk;
+ main_cfg->nocclk = altrgrp_cfg->nocclk;
+ }
+ child = fdt_next_subnode(blob, child);
+
+ if (child < 0)
+ break;
+
+ node_name = fdt_get_name(blob, child, &len);
+ }
+
+ return 0;
+}
+
+/* calculate the intended main VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_main_vco_clk_hz
+ (struct mainpll_cfg *main_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check main VCO clock source: eosc, intosc or f2s? */
+ switch (main_cfg->vco0_psrc) {
+ case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+
+ /* calculate the VCO frequency */
+ clk_hz /= 1 + main_cfg->vco1_denom;
+ clk_hz *= 1 + main_cfg->vco1_numer;
+
+ return clk_hz;
+}
+
+/* calculate the intended periph VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_periph_vco_clk_hz(
+ struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check periph VCO clock source: eosc, intosc, f2s or mainpll? */
+ switch (per_cfg->vco0_psrc) {
+ case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= main_cfg->cntr15clk_cnt;
+ break;
+ default:
+ return 0;
+ }
+
+ /* calculate the VCO frequency */
+ clk_hz /= 1 + per_cfg->vco1_denom;
+ clk_hz *= 1 + per_cfg->vco1_numer;
+
+ return clk_hz;
+}
+
+/* calculate the intended MPU clock frequency based on handoff */
+static unsigned int cm_calc_handoff_mpu_clk_hz(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+ switch (main_cfg->mpuclk_src) {
+ case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= (main_cfg->mpuclk & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+ + 1;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+ clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+ clk_hz /= ((main_cfg->mpuclk >>
+ CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+
+ clk_hz /= main_cfg->mpuclk_cnt + 1;
+ return clk_hz;
+}
+
+/* calculate the intended NOC clock frequency based on handoff */
+static unsigned int cm_calc_handoff_noc_clk_hz(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+ switch (main_cfg->nocclk_src) {
+ case CLKMGR_MAINPLL_NOCCLK_SRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= (main_cfg->nocclk & CLKMGR_MAINPLL_NOCCLK_CNT_MSK)
+ + 1;
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_PERI:
+ clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+ clk_hz /= ((main_cfg->nocclk >>
+ CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1;
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+
+ clk_hz /= main_cfg->nocclk_cnt + 1;
+ return clk_hz;
+}
+
+/* return 1 if PLL ramp is required */
+static int cm_is_pll_ramp_required(int main0periph1,
+ struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg)
+{
+ /* Check for main PLL */
+ if (main0periph1 == 0) {
+ /*
+ * PLL ramp is not required if both MPU clock and NOC clock are
+ * not sourced from main PLL
+ */
+ if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+ main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_MAIN)
+ return 0;
+
+ /*
+ * PLL ramp is required if MPU clock is sourced from main PLL
+ * and MPU clock is over 900MHz (as advised by HW team)
+ */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+ (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+ return 1;
+
+ /*
+ * PLL ramp is required if NOC clock is sourced from main PLL
+ * and NOC clock is over 300MHz (as advised by HW team)
+ */
+ if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN &&
+ (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+ return 2;
+
+ } else if (main0periph1 == 1) {
+ /*
+ * PLL ramp is not required if both MPU clock and NOC clock are
+ * not sourced from periph PLL
+ */
+ if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+ main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_PERI)
+ return 0;
+
+ /*
+ * PLL ramp is required if MPU clock are source from periph PLL
+ * and MPU clock is over 900MHz (as advised by HW team)
+ */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+ (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+ return 1;
+
+ /*
+ * PLL ramp is required if NOC clock are source from periph PLL
+ * and NOC clock is over 300MHz (as advised by HW team)
+ */
+ if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI &&
+ (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+ return 2;
+ }
+
+ return 0;
+}
+
+static u32 cm_calculate_numer(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ u32 safe_hz, u32 clk_hz)
+{
+ u32 cnt;
+ u32 clk;
+ u32 shift;
+ u32 mask;
+ u32 denom;
+
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+ cnt = main_cfg->mpuclk_cnt;
+ clk = main_cfg->mpuclk;
+ shift = 0;
+ mask = CLKMGR_MAINPLL_MPUCLK_CNT_MSK;
+ denom = main_cfg->vco1_denom;
+ } else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+ cnt = main_cfg->nocclk_cnt;
+ clk = main_cfg->nocclk;
+ shift = 0;
+ mask = CLKMGR_MAINPLL_NOCCLK_CNT_MSK;
+ denom = main_cfg->vco1_denom;
+ } else if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+ cnt = main_cfg->mpuclk_cnt;
+ clk = main_cfg->mpuclk;
+ shift = CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB;
+ mask = CLKMGR_MAINPLL_MPUCLK_CNT_MSK;
+ denom = per_cfg->vco1_denom;
+ } else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+ cnt = main_cfg->nocclk_cnt;
+ clk = main_cfg->nocclk;
+ shift = CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB;
+ mask = CLKMGR_MAINPLL_NOCCLK_CNT_MSK;
+ denom = per_cfg->vco1_denom;
+ } else {
+ return 0;
+ }
+
+ return (safe_hz / clk_hz) * (cnt + 1) * (((clk >> shift) & mask) + 1) *
+ (1 + denom) - 1;
+}
+
+/*
+ * Calculate the new PLL numerator which is based on existing DTS hand off and
+ * intended safe frequency (safe_hz). Note that PLL ramp is only modifying the
+ * numerator while maintaining denominator as denominator will influence the
+ * jitter condition. Please refer A10 HPS TRM for the jitter guide. Note final
+ * value for numerator is minus with 1 to cater our register value
+ * representation.
+ */
+static unsigned int cm_calc_safe_pll_numer(int main0periph1,
+ struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ unsigned int safe_hz)
+{
+ unsigned int clk_hz = 0;
+
+ /* Check for main PLL */
+ if (main0periph1 == 0) {
+ /* Check main VCO clock source: eosc, intosc or f2s? */
+ switch (main_cfg->vco0_psrc) {
+ case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+ } else if (main0periph1 == 1) {
+ /* Check periph VCO clock source: eosc, intosc, f2s, mainpll */
+ switch (per_cfg->vco0_psrc) {
+ case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= main_cfg->cntr15clk_cnt;
+ break;
+ default:
+ return 0;
+ }
+ } else {
+ return 0;
+ }
+
+ return cm_calculate_numer(main_cfg, per_cfg, safe_hz, clk_hz);
+}
+
+/* ramping the main PLL to final value */
+static void cm_pll_ramp_main(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ unsigned int pll_ramp_main_hz)
+{
+ unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+ /* find out the increment value */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+ } else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+ }
+
+ /* execute the ramping here */
+ for (clk_hz = pll_ramp_main_hz + clk_incr_hz;
+ clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+ writel((main_cfg->vco1_denom <<
+ CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(0, main_cfg, per_cfg, clk_hz),
+ &clock_manager_base->main_pll.vco1);
+ mdelay(1);
+ cm_wait_for_lock(LOCKED_MASK);
+ }
+ writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ main_cfg->vco1_numer, &clock_manager_base->main_pll.vco1);
+ mdelay(1);
+ cm_wait_for_lock(LOCKED_MASK);
+}
+
+/* ramping the periph PLL to final value */
+static void cm_pll_ramp_periph(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ unsigned int pll_ramp_periph_hz)
+{
+ unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+ /* find out the increment value */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+ } else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+ }
+ /* execute the ramping here */
+ for (clk_hz = pll_ramp_periph_hz + clk_incr_hz;
+ clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(1, main_cfg, per_cfg, clk_hz),
+ &clock_manager_base->per_pll.vco1);
+ mdelay(1);
+ cm_wait_for_lock(LOCKED_MASK);
+ }
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ per_cfg->vco1_numer, &clock_manager_base->per_pll.vco1);
+ mdelay(1);
+ cm_wait_for_lock(LOCKED_MASK);
+}
+
+/*
+ * Setup clocks while making no assumptions of the
+ * previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ *
+ * Put all plls in bypass
+ *
+ * Put all plls VCO registers back to reset value (bgpwr dwn).
+ *
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ *
+ * Delay 5 us.
+ *
+ * Deassert bg pwr dn and set numerator and denominator
+ *
+ * Start 7 us timer.
+ *
+ * set internal dividers
+ *
+ * Wait for 7 us timer.
+ *
+ * Enable plls
+ *
+ * Set external dividers while plls are locking
+ *
+ * Wait for pll lock
+ *
+ * Assert/deassert outreset all.
+ *
+ * Take all pll's out of bypass
+ *
+ * Clear safe mode
+ *
+ * set source main and peripheral clocks
+ *
+ * Ungate clocks
+ */
+
+static int cm_full_cfg(struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+ unsigned int pll_ramp_main_hz = 0, pll_ramp_periph_hz = 0,
+ ramp_required;
+
+ /* gate off all mainpll clock excpet HW managed clock */
+ writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+ CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+ &clock_manager_base->main_pll.enr);
+
+ /* now we can gate off the rest of the peripheral clocks */
+ writel(0, &clock_manager_base->per_pll.en);
+
+ /* Put all plls in external bypass */
+ writel(CLKMGR_MAINPLL_BYPASS_RESET,
+ &clock_manager_base->main_pll.bypasss);
+ writel(CLKMGR_PERPLL_BYPASS_RESET,
+ &clock_manager_base->per_pll.bypasss);
+
+ /*
+ * Put all plls VCO registers back to reset value.
+ * Some code might have messed with them. At same time set the
+ * desired clock source
+ */
+ writel(CLKMGR_MAINPLL_VCO0_RESET |
+ CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK |
+ (main_cfg->vco0_psrc << CLKMGR_MAINPLL_VCO0_PSRC_LSB),
+ &clock_manager_base->main_pll.vco0);
+
+ writel(CLKMGR_PERPLL_VCO0_RESET |
+ CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK |
+ (per_cfg->vco0_psrc << CLKMGR_PERPLL_VCO0_PSRC_LSB),
+ &clock_manager_base->per_pll.vco0);
+
+ writel(CLKMGR_MAINPLL_VCO1_RESET, &clock_manager_base->main_pll.vco1);
+ writel(CLKMGR_PERPLL_VCO1_RESET, &clock_manager_base->per_pll.vco1);
+
+ /* clear the interrupt register status register */
+ writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK,
+ &clock_manager_base->intr);
+
+ /* Program VCO Numerator and Denominator for main PLL */
+ ramp_required = cm_is_pll_ramp_required(0, main_cfg, per_cfg);
+ if (ramp_required) {
+ /* set main PLL to safe starting threshold frequency */
+ if (ramp_required == 1)
+ pll_ramp_main_hz = CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+ else if (ramp_required == 2)
+ pll_ramp_main_hz = CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+ writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(0, main_cfg, per_cfg,
+ pll_ramp_main_hz),
+ &clock_manager_base->main_pll.vco1);
+ } else
+ writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ main_cfg->vco1_numer,
+ &clock_manager_base->main_pll.vco1);
+
+ /* Program VCO Numerator and Denominator for periph PLL */
+ ramp_required = cm_is_pll_ramp_required(1, main_cfg, per_cfg);
+ if (ramp_required) {
+ /* set periph PLL to safe starting threshold frequency */
+ if (ramp_required == 1)
+ pll_ramp_periph_hz =
+ CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+ else if (ramp_required == 2)
+ pll_ramp_periph_hz =
+ CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(1, main_cfg, per_cfg,
+ pll_ramp_periph_hz),
+ &clock_manager_base->per_pll.vco1);
+ } else
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ per_cfg->vco1_numer,
+ &clock_manager_base->per_pll.vco1);
+
+ /* Wait for at least 5 us */
+ udelay(5);
+
+ /* Now deassert BGPWRDN and PWRDN */
+ clrbits_le32(&clock_manager_base->main_pll.vco0,
+ CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK |
+ CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK);
+ clrbits_le32(&clock_manager_base->per_pll.vco0,
+ CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK |
+ CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK);
+
+ /* Wait for at least 7 us */
+ udelay(7);
+
+ /* enable the VCO and disable the external regulator to PLL */
+ writel((readl(&clock_manager_base->main_pll.vco0) &
+ ~CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK) |
+ CLKMGR_MAINPLL_VCO0_EN_SET_MSK,
+ &clock_manager_base->main_pll.vco0);
+ writel((readl(&clock_manager_base->per_pll.vco0) &
+ ~CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK) |
+ CLKMGR_PERPLL_VCO0_EN_SET_MSK,
+ &clock_manager_base->per_pll.vco0);
+
+ /* setup all the main PLL counter and clock source */
+ writel(main_cfg->nocclk,
+ SOCFPGA_CLKMGR_ADDRESS + CLKMGR_MAINPLL_NOC_CLK_OFFSET);
+ writel(main_cfg->mpuclk,
+ SOCFPGA_CLKMGR_ADDRESS + CLKMGR_ALTERAGRP_MPU_CLK_OFFSET);
+
+ /* main_emaca_clk divider */
+ writel(main_cfg->cntr2clk_cnt, &clock_manager_base->main_pll.cntr2clk);
+ /* main_emacb_clk divider */
+ writel(main_cfg->cntr3clk_cnt, &clock_manager_base->main_pll.cntr3clk);
+ /* main_emac_ptp_clk divider */
+ writel(main_cfg->cntr4clk_cnt, &clock_manager_base->main_pll.cntr4clk);
+ /* main_gpio_db_clk divider */
+ writel(main_cfg->cntr5clk_cnt, &clock_manager_base->main_pll.cntr5clk);
+ /* main_sdmmc_clk divider */
+ writel(main_cfg->cntr6clk_cnt, &clock_manager_base->main_pll.cntr6clk);
+ /* main_s2f_user0_clk divider */
+ writel(main_cfg->cntr7clk_cnt |
+ (main_cfg->cntr7clk_src << CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB),
+ &clock_manager_base->main_pll.cntr7clk);
+ /* main_s2f_user1_clk divider */
+ writel(main_cfg->cntr8clk_cnt, &clock_manager_base->main_pll.cntr8clk);
+ /* main_hmc_pll_clk divider */
+ writel(main_cfg->cntr9clk_cnt |
+ (main_cfg->cntr9clk_src << CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB),
+ &clock_manager_base->main_pll.cntr9clk);
+ /* main_periph_ref_clk divider */
+ writel(main_cfg->cntr15clk_cnt,
+ &clock_manager_base->main_pll.cntr15clk);
+
+ /* setup all the peripheral PLL counter and clock source */
+ /* peri_emaca_clk divider */
+ writel(per_cfg->cntr2clk_cnt |
+ (per_cfg->cntr2clk_src << CLKMGR_PERPLL_CNTR2CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr2clk);
+ /* peri_emacb_clk divider */
+ writel(per_cfg->cntr3clk_cnt |
+ (per_cfg->cntr3clk_src << CLKMGR_PERPLL_CNTR3CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr3clk);
+ /* peri_emac_ptp_clk divider */
+ writel(per_cfg->cntr4clk_cnt |
+ (per_cfg->cntr4clk_src << CLKMGR_PERPLL_CNTR4CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr4clk);
+ /* peri_gpio_db_clk divider */
+ writel(per_cfg->cntr5clk_cnt |
+ (per_cfg->cntr5clk_src << CLKMGR_PERPLL_CNTR5CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr5clk);
+ /* peri_sdmmc_clk divider */
+ writel(per_cfg->cntr6clk_cnt |
+ (per_cfg->cntr6clk_src << CLKMGR_PERPLL_CNTR6CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr6clk);
+ /* peri_s2f_user0_clk divider */
+ writel(per_cfg->cntr7clk_cnt, &clock_manager_base->per_pll.cntr7clk);
+ /* peri_s2f_user1_clk divider */
+ writel(per_cfg->cntr8clk_cnt |
+ (per_cfg->cntr8clk_src << CLKMGR_PERPLL_CNTR8CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr8clk);
+ /* peri_hmc_pll_clk divider */
+ writel(per_cfg->cntr9clk_cnt, &clock_manager_base->per_pll.cntr9clk);
+
+ /* setup all the external PLL counter */
+ /* mpu wrapper / external divider */
+ writel(main_cfg->mpuclk_cnt |
+ (main_cfg->mpuclk_src << CLKMGR_MAINPLL_MPUCLK_SRC_LSB),
+ &clock_manager_base->main_pll.mpuclk);
+ /* NOC wrapper / external divider */
+ writel(main_cfg->nocclk_cnt |
+ (main_cfg->nocclk_src << CLKMGR_MAINPLL_NOCCLK_SRC_LSB),
+ &clock_manager_base->main_pll.nocclk);
+ /* NOC subclock divider such as l4 */
+ writel(main_cfg->nocdiv_l4mainclk |
+ (main_cfg->nocdiv_l4mpclk <<
+ CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) |
+ (main_cfg->nocdiv_l4spclk <<
+ CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB) |
+ (main_cfg->nocdiv_csatclk <<
+ CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB) |
+ (main_cfg->nocdiv_cstraceclk <<
+ CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB) |
+ (main_cfg->nocdiv_cspdbclk <<
+ CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB),
+ &clock_manager_base->main_pll.nocdiv);
+ /* gpio_db external divider */
+ writel(per_cfg->gpiodiv_gpiodbclk,
+ &clock_manager_base->per_pll.gpiodiv);
+
+ /* setup the EMAC clock mux select */
+ writel((per_cfg->emacctl_emac0sel <<
+ CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB) |
+ (per_cfg->emacctl_emac1sel <<
+ CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB) |
+ (per_cfg->emacctl_emac2sel <<
+ CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB),
+ &clock_manager_base->per_pll.emacctl);
+
+ /* at this stage, check for PLL lock status */
+ cm_wait_for_lock(LOCKED_MASK);
+
+ /*
+ * after locking, but before taking out of bypass,
+ * assert/deassert outresetall
+ */
+ /* assert mainpll outresetall */
+ setbits_le32(&clock_manager_base->main_pll.vco0,
+ CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+ /* assert perpll outresetall */
+ setbits_le32(&clock_manager_base->per_pll.vco0,
+ CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+ /* de-assert mainpll outresetall */
+ clrbits_le32(&clock_manager_base->main_pll.vco0,
+ CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+ /* de-assert perpll outresetall */
+ clrbits_le32(&clock_manager_base->per_pll.vco0,
+ CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+
+ /* Take all PLLs out of bypass when boot mode is cleared. */
+ /* release mainpll from bypass */
+ writel(CLKMGR_MAINPLL_BYPASS_RESET,
+ &clock_manager_base->main_pll.bypassr);
+ /* wait till Clock Manager is not busy */
+ cm_wait_for_fsm();
+
+ /* release perpll from bypass */
+ writel(CLKMGR_PERPLL_BYPASS_RESET,
+ &clock_manager_base->per_pll.bypassr);
+ /* wait till Clock Manager is not busy */
+ cm_wait_for_fsm();
+
+ /* clear boot mode */
+ clrbits_le32(&clock_manager_base->ctrl,
+ CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK);
+ /* wait till Clock Manager is not busy */
+ cm_wait_for_fsm();
+
+ /* At here, we need to ramp to final value if needed */
+ if (pll_ramp_main_hz != 0)
+ cm_pll_ramp_main(main_cfg, per_cfg, pll_ramp_main_hz);
+ if (pll_ramp_periph_hz != 0)
+ cm_pll_ramp_periph(main_cfg, per_cfg, pll_ramp_periph_hz);
+
+ /* Now ungate non-hw-managed clocks */
+ writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+ CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+ &clock_manager_base->main_pll.ens);
+ writel(CLKMGR_PERPLL_EN_RESET, &clock_manager_base->per_pll.ens);
+
+ /* Clear the loss lock and slip bits as they might set during
+ clock reconfiguration */
+ writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK,
+ &clock_manager_base->intr);
+
+ return 0;
+}
+
+void cm_use_intosc(void)
+{
+ setbits_le32(&clock_manager_base->ctrl,
+ CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK);
+}
+
+unsigned int cm_get_noc_clk_hz(void)
+{
+ unsigned int clk_src, divisor, nocclk, src_hz;
+
+ nocclk = readl(&clock_manager_base->main_pll.nocclk);
+ clk_src = (nocclk >> CLKMGR_MAINPLL_NOCCLK_SRC_LSB) &
+ CLKMGR_MAINPLL_NOCCLK_SRC_MSK;
+
+ divisor = 1 + (nocclk & CLKMGR_MAINPLL_NOCDIV_MSK);
+
+ if (clk_src == CLKMGR_PERPLLGRP_SRC_MAIN) {
+ src_hz = cm_get_main_vco_clk_hz();
+ src_hz /= 1 +
+ (readl(SOCFPGA_CLKMGR_ADDRESS + CLKMGR_MAINPLL_NOC_CLK_OFFSET) &
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_PERI) {
+ src_hz = cm_get_per_vco_clk_hz();
+ src_hz /= 1 +
+ ((readl(SOCFPGA_CLKMGR_ADDRESS +
+ CLKMGR_MAINPLL_NOC_CLK_OFFSET) >>
+ CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_OSC1) {
+ src_hz = eosc1_hz;
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_INTOSC) {
+ src_hz = cb_intosc_hz;
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_FPGA) {
+ src_hz = f2s_free_hz;
+ } else {
+ src_hz = 0;
+ }
+
+ return src_hz / divisor;
+}
+
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift)
+{
+ unsigned int divisor2 = 1 <<
+ ((readl(&clock_manager_base->main_pll.nocdiv) >>
+ nocdivshift) & CLKMGR_MAINPLL_NOCDIV_MSK);
+
+ return cm_get_noc_clk_hz() / divisor2;
+}
+
+int cm_basic_init(const void *blob)
+{
+ struct mainpll_cfg main_cfg;
+ struct perpll_cfg per_cfg;
+ struct alteragrp_cfg altrgrp_cfg;
+ int rval;
+
+ /* initialize to zero for use case of optional node */
+ memset(&main_cfg, 0, sizeof(main_cfg));
+ memset(&per_cfg, 0, sizeof(per_cfg));
+ memset(&altrgrp_cfg, 0, sizeof(altrgrp_cfg));
+
+ rval = of_get_clk_cfg(blob, &main_cfg, &per_cfg, &altrgrp_cfg);
+ if (rval)
+ return rval;
+
+ rval = cm_full_cfg(&main_cfg, &per_cfg);
+
+ cm_l4_main_clk_hz =
+ cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+
+ cm_l4_mp_clk_hz = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+
+ cm_l4_sp_clk_hz = cm_get_l4_sp_clk_hz();
+
+ cm_l4_sys_free_clk_hz = cm_get_noc_clk_hz() / 4;
+
+ return rval;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+ u32 reg, clk_hz;
+ u32 clk_src, mainmpuclk_reg;
+
+ mainmpuclk_reg = readl(&clock_manager_base->main_pll.mpuclk);
+
+ clk_src = (mainmpuclk_reg >> CLKMGR_MAINPLL_MPUCLK_SRC_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_SRC_MSK;
+
+ reg = readl(&clock_manager_base->altera.mpuclk);
+ /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+ switch (clk_src) {
+ case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+ clk_hz = cm_get_main_vco_clk_hz();
+ clk_hz /= (reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+ clk_hz = cm_get_per_vco_clk_hz();
+ clk_hz /= (((reg >> CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ printf("cm_get_mpu_clk_hz invalid clk_src %d\n", clk_src);
+ return 0;
+ }
+
+ clk_hz /= (mainmpuclk_reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1;
+
+ return clk_hz;
+}
+
+unsigned int cm_get_per_vco_clk_hz(void)
+{
+ u32 src_hz = 0;
+ u32 clk_src = 0;
+ u32 numer = 0;
+ u32 denom = 0;
+ u32 vco = 0;
+
+ clk_src = readl(&clock_manager_base->per_pll.vco0);
+
+ clk_src = (clk_src >> CLKMGR_PERPLL_VCO0_PSRC_LSB) &
+ CLKMGR_PERPLL_VCO0_PSRC_MSK;
+
+ if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_EOSC) {
+ src_hz = eosc1_hz;
+ } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC) {
+ src_hz = cb_intosc_hz;
+ } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_F2S) {
+ src_hz = f2s_free_hz;
+ } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_MAIN) {
+ src_hz = cm_get_main_vco_clk_hz();
+ src_hz /= (readl(&clock_manager_base->main_pll.cntr15clk) &
+ CLKMGR_MAINPLL_CNTRCLK_MSK) + 1;
+ } else {
+ printf("cm_get_per_vco_clk_hz invalid clk_src %d\n", clk_src);
+ return 0;
+ }
+
+ vco = readl(&clock_manager_base->per_pll.vco1);
+
+ numer = vco & CLKMGR_PERPLL_VCO1_NUMER_MSK;
+
+ denom = (vco >> CLKMGR_PERPLL_VCO1_DENOM_LSB) &
+ CLKMGR_PERPLL_VCO1_DENOM_MSK;
+
+ vco = src_hz;
+ vco /= 1 + denom;
+ vco *= 1 + numer;
+
+ return vco;
+}
+
+unsigned int cm_get_main_vco_clk_hz(void)
+{
+ u32 src_hz, numer, denom, vco;
+
+ u32 clk_src = readl(&clock_manager_base->main_pll.vco0);
+
+ clk_src = (clk_src >> CLKMGR_MAINPLL_VCO0_PSRC_LSB) &
+ CLKMGR_MAINPLL_VCO0_PSRC_MSK;
+
+ if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_EOSC) {
+ src_hz = eosc1_hz;
+ } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC) {
+ src_hz = cb_intosc_hz;
+ } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_F2S) {
+ src_hz = f2s_free_hz;
+ } else {
+ printf("cm_get_main_vco_clk_hz invalid clk_src %d\n", clk_src);
+ return 0;
+ }
+
+ vco = readl(&clock_manager_base->main_pll.vco1);
+
+ numer = vco & CLKMGR_MAINPLL_VCO1_NUMER_MSK;
+
+ denom = (vco >> CLKMGR_MAINPLL_VCO1_DENOM_LSB) &
+ CLKMGR_MAINPLL_VCO1_DENOM_MSK;
+
+ vco = src_hz;
+ vco /= 1 + denom;
+ vco *= 1 + numer;
+
+ return vco;
+}
+
+unsigned int cm_get_l4_sp_clk_hz(void)
+{
+ return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB);
+}
+
+unsigned int cm_get_mmc_controller_clk_hz(void)
+{
+ u32 clk_hz = 0;
+ u32 clk_input = 0;
+
+ clk_input = readl(&clock_manager_base->per_pll.cntr6clk);
+ clk_input = (clk_input >> CLKMGR_PERPLL_CNTR6CLK_SRC_LSB) &
+ CLKMGR_PERPLLGRP_SRC_MSK;
+
+ switch (clk_input) {
+ case CLKMGR_PERPLLGRP_SRC_MAIN:
+ clk_hz = cm_get_main_vco_clk_hz();
+ clk_hz /= 1 + (readl(&clock_manager_base->main_pll.cntr6clk) &
+ CLKMGR_MAINPLL_CNTRCLK_MSK);
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_PERI:
+ clk_hz = cm_get_per_vco_clk_hz();
+ clk_hz /= 1 + (readl(&clock_manager_base->per_pll.cntr6clk) &
+ CLKMGR_PERPLL_CNTRCLK_MSK);
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ }
+
+ return clk_hz / 4;
+}
+
+unsigned int cm_get_spi_controller_clk_hz(void)
+{
+ return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+}
+
+unsigned int cm_get_qspi_controller_clk_hz(void)
+{
+ return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+}
+
+void cm_print_clock_quick_summary(void)
+{
+ printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
+ printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+ printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
+ printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+ printf("EOSC1 %8d kHz\n", eosc1_hz / 1000);
+ printf("cb_intosc %8d kHz\n", cb_intosc_hz / 1000);
+ printf("f2s_free %8d kHz\n", f2s_free_hz / 1000);
+ printf("Main VCO %8d kHz\n", cm_get_main_vco_clk_hz() / 1000);
+ printf("NOC %8d kHz\n", cm_get_noc_clk_hz() / 1000);
+ printf("L4 Main %8d kHz\n",
+ cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB) / 1000);
+ printf("L4 MP %8d kHz\n",
+ cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) / 1000);
+ printf("L4 SP %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
+ printf("L4 sys free %8d kHz\n", cm_l4_sys_free_clk_hz / 1000);
+}
diff --git a/arch/arm/mach-socfpga/clock_manager_gen5.c b/arch/arm/mach-socfpga/clock_manager_gen5.c
new file mode 100644
index 0000000..31fd510
--- /dev/null
+++ b/arch/arm/mach-socfpga/clock_manager_gen5.c
@@ -0,0 +1,524 @@
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_clock_manager *clock_manager_base =
+ (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
+
+/*
+ * function to write the bypass register which requires a poll of the
+ * busy bit
+ */
+static void cm_write_bypass(u32 val)
+{
+ writel(val, &clock_manager_base->bypass);
+ cm_wait_for_fsm();
+}
+
+/* function to write the ctrl register which requires a poll of the busy bit */
+static void cm_write_ctrl(u32 val)
+{
+ writel(val, &clock_manager_base->ctrl);
+ cm_wait_for_fsm();
+}
+
+/* function to write a clock register that has phase information */
+static int cm_write_with_phase(u32 value, u32 reg_address, u32 mask)
+{
+ int ret;
+
+ /* poll until phase is zero */
+ ret = wait_for_bit(__func__, (const u32 *)reg_address, mask,
+ false, 20000, false);
+ if (ret)
+ return ret;
+
+ writel(value, reg_address);
+
+ return wait_for_bit(__func__, (const u32 *)reg_address, mask,
+ false, 20000, false);
+}
+
+/*
+ * Setup clocks while making no assumptions about previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ * Put all plls in bypass
+ * Put all plls VCO registers back to reset value (bandgap power down).
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ * Delay 5 us.
+ * Deassert bandgap power down and set numerator and denominator
+ * Start 7 us timer.
+ * set internal dividers
+ * Wait for 7 us timer.
+ * Enable plls
+ * Set external dividers while plls are locking
+ * Wait for pll lock
+ * Assert/deassert outreset all.
+ * Take all pll's out of bypass
+ * Clear safe mode
+ * set source main and peripheral clocks
+ * Ungate clocks
+ */
+
+int cm_basic_init(const struct cm_config * const cfg)
+{
+ unsigned long end;
+ int ret;
+
+ /* Start by being paranoid and gate all sw managed clocks */
+
+ /*
+ * We need to disable nandclk
+ * and then do another apb access before disabling
+ * gatting off the rest of the periperal clocks.
+ */
+ writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
+ readl(&clock_manager_base->per_pll.en),
+ &clock_manager_base->per_pll.en);
+
+ /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
+ writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
+ &clock_manager_base->main_pll.en);
+
+ writel(0, &clock_manager_base->sdr_pll.en);
+
+ /* now we can gate off the rest of the peripheral clocks */
+ writel(0, &clock_manager_base->per_pll.en);
+
+ /* Put all plls in bypass */
+ cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
+ CLKMGR_BYPASS_MAINPLL);
+
+ /* Put all plls VCO registers back to reset value. */
+ writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
+ ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->main_pll.vco);
+ writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
+ ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->per_pll.vco);
+ writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
+ ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->sdr_pll.vco);
+
+ /*
+ * The clocks to the flash devices and the L4_MAIN clocks can
+ * glitch when coming out of safe mode if their source values
+ * are different from their reset value. So the trick it to
+ * put them back to their reset state, and change input
+ * after exiting safe mode but before ungating the clocks.
+ */
+ writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
+ &clock_manager_base->per_pll.src);
+ writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
+ &clock_manager_base->main_pll.l4src);
+
+ /* read back for the required 5 us delay. */
+ readl(&clock_manager_base->main_pll.vco);
+ readl(&clock_manager_base->per_pll.vco);
+ readl(&clock_manager_base->sdr_pll.vco);
+
+
+ /*
+ * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
+ * with numerator and denominator.
+ */
+ writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
+ writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
+ writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
+
+ /*
+ * Time starts here. Must wait 7 us from
+ * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
+ */
+ end = timer_get_us() + 7;
+
+ /* main mpu */
+ writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
+
+ /* altera group mpuclk */
+ writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
+
+ /* main main clock */
+ writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
+
+ /* main for dbg */
+ writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
+
+ /* main for cfgs2fuser0clk */
+ writel(cfg->cfg2fuser0clk,
+ &clock_manager_base->main_pll.cfgs2fuser0clk);
+
+ /* Peri emac0 50 MHz default to RMII */
+ writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
+
+ /* Peri emac1 50 MHz default to RMII */
+ writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
+
+ /* Peri QSPI */
+ writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
+
+ writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
+
+ /* Peri pernandsdmmcclk */
+ writel(cfg->mainnandsdmmcclk,
+ &clock_manager_base->main_pll.mainnandsdmmcclk);
+
+ writel(cfg->pernandsdmmcclk,
+ &clock_manager_base->per_pll.pernandsdmmcclk);
+
+ /* Peri perbaseclk */
+ writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
+
+ /* Peri s2fuser1clk */
+ writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
+
+ /* 7 us must have elapsed before we can enable the VCO */
+ while (timer_get_us() < end)
+ ;
+
+ /* Enable vco */
+ /* main pll vco */
+ writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->main_pll.vco);
+
+ /* periferal pll */
+ writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->per_pll.vco);
+
+ /* sdram pll vco */
+ writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->sdr_pll.vco);
+
+ /* L3 MP and L3 SP */
+ writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
+
+ writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
+
+ writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
+
+ /* L4 MP, L4 SP, can0, and can1 */
+ writel(cfg->perdiv, &clock_manager_base->per_pll.div);
+
+ writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
+
+ cm_wait_for_lock(LOCKED_MASK);
+
+ /* write the sdram clock counters before toggling outreset all */
+ writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.ddrdqsclk);
+
+ writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.ddr2xdqsclk);
+
+ writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.ddrdqclk);
+
+ writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.s2fuser2clk);
+
+ /*
+ * after locking, but before taking out of bypass
+ * assert/deassert outresetall
+ */
+ u32 mainvco = readl(&clock_manager_base->main_pll.vco);
+
+ /* assert main outresetall */
+ writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->main_pll.vco);
+
+ u32 periphvco = readl(&clock_manager_base->per_pll.vco);
+
+ /* assert pheriph outresetall */
+ writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->per_pll.vco);
+
+ /* assert sdram outresetall */
+ writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
+ CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
+ &clock_manager_base->sdr_pll.vco);
+
+ /* deassert main outresetall */
+ writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->main_pll.vco);
+
+ /* deassert pheriph outresetall */
+ writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->per_pll.vco);
+
+ /* deassert sdram outresetall */
+ writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->sdr_pll.vco);
+
+ /*
+ * now that we've toggled outreset all, all the clocks
+ * are aligned nicely; so we can change any phase.
+ */
+ ret = cm_write_with_phase(cfg->ddrdqsclk,
+ (u32)&clock_manager_base->sdr_pll.ddrdqsclk,
+ CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+ if (ret)
+ return ret;
+
+ /* SDRAM DDR2XDQSCLK */
+ ret = cm_write_with_phase(cfg->ddr2xdqsclk,
+ (u32)&clock_manager_base->sdr_pll.ddr2xdqsclk,
+ CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+ if (ret)
+ return ret;
+
+ ret = cm_write_with_phase(cfg->ddrdqclk,
+ (u32)&clock_manager_base->sdr_pll.ddrdqclk,
+ CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+ if (ret)
+ return ret;
+
+ ret = cm_write_with_phase(cfg->s2fuser2clk,
+ (u32)&clock_manager_base->sdr_pll.s2fuser2clk,
+ CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+ if (ret)
+ return ret;
+
+ /* Take all three PLLs out of bypass when safe mode is cleared. */
+ cm_write_bypass(0);
+
+ /* clear safe mode */
+ cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
+
+ /*
+ * now that safe mode is clear with clocks gated
+ * it safe to change the source mux for the flashes the the L4_MAIN
+ */
+ writel(cfg->persrc, &clock_manager_base->per_pll.src);
+ writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
+
+ /* Now ungate non-hw-managed clocks */
+ writel(~0, &clock_manager_base->main_pll.en);
+ writel(~0, &clock_manager_base->per_pll.en);
+ writel(~0, &clock_manager_base->sdr_pll.en);
+
+ /* Clear the loss of lock bits (write 1 to clear) */
+ writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
+ CLKMGR_INTER_MAINPLLLOST_MASK,
+ &clock_manager_base->inter);
+
+ return 0;
+}
+
+static unsigned int cm_get_main_vco_clk_hz(void)
+{
+ u32 reg, clock;
+
+ /* get the main VCO clock */
+ reg = readl(&clock_manager_base->main_pll.vco);
+ clock = cm_get_osc_clk_hz(1);
+ clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
+ clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+ return clock;
+}
+
+static unsigned int cm_get_per_vco_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify PER PLL clock source */
+ reg = readl(&clock_manager_base->per_pll.vco);
+ reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
+ if (reg == CLKMGR_VCO_SSRC_EOSC1)
+ clock = cm_get_osc_clk_hz(1);
+ else if (reg == CLKMGR_VCO_SSRC_EOSC2)
+ clock = cm_get_osc_clk_hz(2);
+ else if (reg == CLKMGR_VCO_SSRC_F2S)
+ clock = cm_get_f2s_per_ref_clk_hz();
+
+ /* get the PER VCO clock */
+ reg = readl(&clock_manager_base->per_pll.vco);
+ clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
+ clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+ return clock;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+ u32 reg, clock;
+
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the MPU clock */
+ reg = readl(&clock_manager_base->altera.mpuclk);
+ clock /= (reg + 1);
+ reg = readl(&clock_manager_base->main_pll.mpuclk);
+ clock /= (reg + 1);
+ return clock;
+}
+
+unsigned long cm_get_sdram_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify SDRAM PLL clock source */
+ reg = readl(&clock_manager_base->sdr_pll.vco);
+ reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
+ CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
+ if (reg == CLKMGR_VCO_SSRC_EOSC1)
+ clock = cm_get_osc_clk_hz(1);
+ else if (reg == CLKMGR_VCO_SSRC_EOSC2)
+ clock = cm_get_osc_clk_hz(2);
+ else if (reg == CLKMGR_VCO_SSRC_F2S)
+ clock = cm_get_f2s_sdr_ref_clk_hz();
+
+ /* get the SDRAM VCO clock */
+ reg = readl(&clock_manager_base->sdr_pll.vco);
+ clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
+ clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+ /* get the SDRAM (DDR_DQS) clock */
+ reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
+ reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
+ CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
+ clock /= (reg + 1);
+
+ return clock;
+}
+
+unsigned int cm_get_l4_sp_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify the source of L4 SP clock */
+ reg = readl(&clock_manager_base->main_pll.l4src);
+ reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
+ CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
+
+ if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (main clk) */
+ reg = readl(&clock_manager_base->altera.mainclk);
+ clock /= (reg + 1);
+ reg = readl(&clock_manager_base->main_pll.mainclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (periph_base_clk) */
+ reg = readl(&clock_manager_base->per_pll.perbaseclk);
+ clock /= (reg + 1);
+ }
+
+ /* get the L4 SP clock which supplied to UART */
+ reg = readl(&clock_manager_base->main_pll.maindiv);
+ reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
+ CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
+ clock = clock / (1 << reg);
+
+ return clock;
+}
+
+unsigned int cm_get_mmc_controller_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify the source of MMC clock */
+ reg = readl(&clock_manager_base->per_pll.src);
+ reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
+ CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
+
+ if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
+ clock = cm_get_f2s_per_ref_clk_hz();
+ } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the SDMMC clock */
+ reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the SDMMC clock */
+ reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
+ clock /= (reg + 1);
+ }
+
+ /* further divide by 4 as we have fixed divider at wrapper */
+ clock /= 4;
+ return clock;
+}
+
+unsigned int cm_get_qspi_controller_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify the source of QSPI clock */
+ reg = readl(&clock_manager_base->per_pll.src);
+ reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
+ CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
+
+ if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
+ clock = cm_get_f2s_per_ref_clk_hz();
+ } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the qspi clock */
+ reg = readl(&clock_manager_base->main_pll.mainqspiclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the qspi clock */
+ reg = readl(&clock_manager_base->per_pll.perqspiclk);
+ clock /= (reg + 1);
+ }
+
+ return clock;
+}
+
+unsigned int cm_get_spi_controller_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (periph_base_clk) */
+ reg = readl(&clock_manager_base->per_pll.perbaseclk);
+ clock /= (reg + 1);
+
+ return clock;
+}
+
+void cm_print_clock_quick_summary(void)
+{
+ printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
+ printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
+ printf("EOSC1 %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
+ printf("EOSC2 %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
+ printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
+ printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
+ printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+ printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
+ printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
+ printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+}
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
index a7056d4..7818aa5 100644
--- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ * Copyright (C) 2014-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -29,17 +29,23 @@
#define SOCFPGA_MPUL2_ADDRESS 0xfffff000
#define SOCFPGA_I2C0_ADDRESS 0xffc02200
#define SOCFPGA_I2C1_ADDRESS 0xffc02300
+#define SOCFPGA_I2C2_ADDRESS 0xffc02400
+#define SOCFPGA_I2C3_ADDRESS 0xffc02500
+#define SOCFPGA_I2C4_ADDRESS 0xffc02600
#define SOCFPGA_ECC_OCRAM_ADDRESS 0xff8c3000
#define SOCFPGA_UART0_ADDRESS 0xffc02000
#define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
+#define SOCFPGA_OSC1TIMER1_ADDRESS 0xffd00100
#define SOCFPGA_CLKMGR_ADDRESS 0xffd04000
#define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
#define SOCFPGA_SDR_ADDRESS 0xffcfb000
+#define SOCFPGA_NOC_L4_PRIV_FLT_OFST 0xffd11000
#define SOCFPGA_SDR_SCHEDULER_ADDRESS 0xffd12400
#define SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS 0xffd13200
#define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS 0xffd13300
#define SOCFPGA_SDR_FIREWALL_L3_ADDRESS 0xffd13400
+#define SOCFPGA_NOC_FW_H2F_SCR_OFST 0xffd13500
#endif /* _SOCFPGA_A10_BASE_HARDWARE_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager.h b/arch/arm/mach-socfpga/include/mach/clock_manager.h
index 803c926..4c6b1f8 100644
--- a/arch/arm/mach-socfpga/include/mach/clock_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager.h
@@ -1,317 +1,22 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef _CLOCK_MANAGER_H_
-#define _CLOCK_MANAGER_H_
+#ifndef _CLOCK_MANAGER_H_
+#define _CLOCK_MANAGER_H_
#ifndef __ASSEMBLER__
-/* Clock speed accessors */
-unsigned long cm_get_mpu_clk_hz(void);
-unsigned long cm_get_sdram_clk_hz(void);
-unsigned int cm_get_l4_sp_clk_hz(void);
-unsigned int cm_get_mmc_controller_clk_hz(void);
-unsigned int cm_get_qspi_controller_clk_hz(void);
-unsigned int cm_get_spi_controller_clk_hz(void);
-const unsigned int cm_get_osc_clk_hz(const int osc);
-const unsigned int cm_get_f2s_per_ref_clk_hz(void);
-const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
-
-/* Clock configuration accessors */
-const struct cm_config * const cm_get_default_config(void);
+void cm_wait_for_lock(u32 mask);
+int cm_wait_for_fsm(void);
+void cm_print_clock_quick_summary(void);
#endif
-struct cm_config {
- /* main group */
- uint32_t main_vco_base;
- uint32_t mpuclk;
- uint32_t mainclk;
- uint32_t dbgatclk;
- uint32_t mainqspiclk;
- uint32_t mainnandsdmmcclk;
- uint32_t cfg2fuser0clk;
- uint32_t maindiv;
- uint32_t dbgdiv;
- uint32_t tracediv;
- uint32_t l4src;
-
- /* peripheral group */
- uint32_t peri_vco_base;
- uint32_t emac0clk;
- uint32_t emac1clk;
- uint32_t perqspiclk;
- uint32_t pernandsdmmcclk;
- uint32_t perbaseclk;
- uint32_t s2fuser1clk;
- uint32_t perdiv;
- uint32_t gpiodiv;
- uint32_t persrc;
-
- /* sdram pll group */
- uint32_t sdram_vco_base;
- uint32_t ddrdqsclk;
- uint32_t ddr2xdqsclk;
- uint32_t ddrdqclk;
- uint32_t s2fuser2clk;
-
- /* altera group */
- uint32_t altera_grp_mpuclk;
-};
-
-void cm_basic_init(const struct cm_config * const cfg);
-
-struct socfpga_clock_manager_main_pll {
- u32 vco;
- u32 misc;
- u32 mpuclk;
- u32 mainclk;
- u32 dbgatclk;
- u32 mainqspiclk;
- u32 mainnandsdmmcclk;
- u32 cfgs2fuser0clk;
- u32 en;
- u32 maindiv;
- u32 dbgdiv;
- u32 tracediv;
- u32 l4src;
- u32 stat;
- u32 _pad_0x38_0x40[2];
-};
-
-struct socfpga_clock_manager_per_pll {
- u32 vco;
- u32 misc;
- u32 emac0clk;
- u32 emac1clk;
- u32 perqspiclk;
- u32 pernandsdmmcclk;
- u32 perbaseclk;
- u32 s2fuser1clk;
- u32 en;
- u32 div;
- u32 gpiodiv;
- u32 src;
- u32 stat;
- u32 _pad_0x34_0x40[3];
-};
-
-struct socfpga_clock_manager_sdr_pll {
- u32 vco;
- u32 ctrl;
- u32 ddrdqsclk;
- u32 ddr2xdqsclk;
- u32 ddrdqclk;
- u32 s2fuser2clk;
- u32 en;
- u32 stat;
-};
-
-struct socfpga_clock_manager_altera {
- u32 mpuclk;
- u32 mainclk;
-};
-
-struct socfpga_clock_manager {
- u32 ctrl;
- u32 bypass;
- u32 inter;
- u32 intren;
- u32 dbctrl;
- u32 stat;
- u32 _pad_0x18_0x3f[10];
- struct socfpga_clock_manager_main_pll main_pll;
- struct socfpga_clock_manager_per_pll per_pll;
- struct socfpga_clock_manager_sdr_pll sdr_pll;
- struct socfpga_clock_manager_altera altera;
- u32 _pad_0xe8_0x200[70];
-};
-
-#define CLKMGR_CTRL_SAFEMODE (1 << 0)
-#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
-
-#define CLKMGR_BYPASS_PERPLLSRC (1 << 4)
-#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
-#define CLKMGR_BYPASS_PERPLL (1 << 3)
-#define CLKMGR_BYPASS_PERPLL_OFFSET 3
-#define CLKMGR_BYPASS_SDRPLLSRC (1 << 2)
-#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
-#define CLKMGR_BYPASS_SDRPLL (1 << 1)
-#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
-#define CLKMGR_BYPASS_MAINPLL (1 << 0)
-#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
-
-#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
-#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
-#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
-#define CLKMGR_INTER_PERPLLLOST_MASK 0x00000010
-#define CLKMGR_INTER_SDRPLLLOST_MASK 0x00000020
-#define CLKMGR_INTER_MAINPLLLOST_MASK 0x00000008
-
-#define CLKMGR_STAT_BUSY (1 << 0)
-
-/* Main PLL */
-#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN (1 << 0)
-#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
-#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
-#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
-#define CLKMGR_MAINPLLGRP_VCO_EN (1 << 1)
-#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
-#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
-#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
-#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
-#define CLKMGR_MAINPLLGRP_VCO_PWRDN (1 << 2)
-#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
-#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
-#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
-
-#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
-#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
-#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
-#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
-#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
-#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
-
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
-
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
-
-#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
-#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
-
-#define CLKMGR_MAINPLLGRP_L4SRC_L4MP (1 << 0)
-#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
-#define CLKMGR_MAINPLLGRP_L4SRC_L4SP (1 << 1)
-#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
-#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
-#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
-#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
-
-/* Per PLL */
-#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
-#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
-#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
-#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
-#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
-#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
-#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
-#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
-#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
-#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
-#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
-
-#define CLKMGR_VCO_SSRC_EOSC1 0x0
-#define CLKMGR_VCO_SSRC_EOSC2 0x1
-#define CLKMGR_VCO_SSRC_F2S 0x2
-
-#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
-#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
-
-#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
-#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
-#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
-#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
-#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
-#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
-#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
-#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
-
-#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
-#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
-
-#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
-#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
-#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
-#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
-#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
-#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
-#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
-#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
-#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
-#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
-#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
-#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
-#define CLKMGR_QSPI_CLK_SRC_PER 0x2
-
-/* SDR PLL */
-#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
-#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
-#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
-#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL (1 << 24)
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
-#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
-#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
-#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
-#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
-
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
-
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
-
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
-
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/clock_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/clock_manager_arria10.h>
+#endif
#endif /* _CLOCK_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h
new file mode 100644
index 0000000..1b55bb8
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef CLOCK_MANAGER_ARRIA10
+#define CLOCK_MANAGER_ARRIA10
+
+#ifndef __ASSEMBLER__
+
+struct socfpga_clock_manager_main_pll {
+ u32 vco0;
+ u32 vco1;
+ u32 en;
+ u32 ens;
+ u32 enr;
+ u32 bypass;
+ u32 bypasss;
+ u32 bypassr;
+ u32 mpuclk;
+ u32 nocclk;
+ u32 cntr2clk;
+ u32 cntr3clk;
+ u32 cntr4clk;
+ u32 cntr5clk;
+ u32 cntr6clk;
+ u32 cntr7clk;
+ u32 cntr8clk;
+ u32 cntr9clk;
+ u32 pad_0x48_0x5b[5];
+ u32 cntr15clk;
+ u32 outrst;
+ u32 outrststat;
+ u32 nocdiv;
+ u32 pad_0x6c_0x80[5];
+};
+
+struct socfpga_clock_manager_per_pll {
+ u32 vco0;
+ u32 vco1;
+ u32 en;
+ u32 ens;
+ u32 enr;
+ u32 bypass;
+ u32 bypasss;
+ u32 bypassr;
+ u32 pad_0x20_0x27[2];
+ u32 cntr2clk;
+ u32 cntr3clk;
+ u32 cntr4clk;
+ u32 cntr5clk;
+ u32 cntr6clk;
+ u32 cntr7clk;
+ u32 cntr8clk;
+ u32 cntr9clk;
+ u32 pad_0x48_0x5f[6];
+ u32 outrst;
+ u32 outrststat;
+ u32 emacctl;
+ u32 gpiodiv;
+ u32 pad_0x70_0x80[4];
+};
+
+struct socfpga_clock_manager_altera {
+ u32 mpuclk;
+ u32 nocclk;
+ u32 mainmisc0;
+ u32 mainmisc1;
+ u32 perimisc0;
+ u32 perimisc1;
+};
+
+struct socfpga_clock_manager {
+ /* clkmgr */
+ u32 ctrl;
+ u32 intr;
+ u32 intrs;
+ u32 intrr;
+ u32 intren;
+ u32 intrens;
+ u32 intrenr;
+ u32 stat;
+ u32 testioctrl;
+ u32 _pad_0x24_0x40[7];
+ /* mainpllgrp */
+ struct socfpga_clock_manager_main_pll main_pll;
+ /* perpllgrp */
+ struct socfpga_clock_manager_per_pll per_pll;
+ struct socfpga_clock_manager_altera altera;
+};
+
+void cm_use_intosc(void);
+unsigned int cm_get_noc_clk_hz(void);
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift);
+int cm_basic_init(const void *blob);
+
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_main_vco_clk_hz(void);
+unsigned int cm_get_per_vco_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+
+#endif /* __ASSEMBLER__ */
+
+#define CLKMGR_ALTERAGRP_MPU_CLK_OFFSET 0x140
+#define CLKMGR_MAINPLL_NOC_CLK_OFFSET 0x144
+#define LOCKED_MASK (CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK | \
+ CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK)
+
+/* value */
+#define CLKMGR_MAINPLL_BYPASS_RESET 0x0000003f
+#define CLKMGR_PERPLL_BYPASS_RESET 0x000000ff
+#define CLKMGR_MAINPLL_VCO0_RESET 0x00010053
+#define CLKMGR_MAINPLL_VCO1_RESET 0x00010001
+#define CLKMGR_PERPLL_VCO0_RESET 0x00010053
+#define CLKMGR_PERPLL_VCO1_RESET 0x00010001
+#define CLKMGR_MAINPLL_VCO0_PSRC_EOSC 0x0
+#define CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC 0x1
+#define CLKMGR_MAINPLL_VCO0_PSRC_F2S 0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_EOSC 0x0
+#define CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC 0x1
+#define CLKMGR_PERPLL_VCO0_PSRC_F2S 0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_MAIN 0x3
+
+/* mask */
+#define CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK BIT(6)
+#define CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK BIT(7)
+#define CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK BIT(8)
+#define CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK BIT(9)
+#define CLKMGR_CLKMGR_STAT_BOOTCLKSRC_SET_MSK BIT(17)
+#define CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK BIT(0)
+#define CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK BIT(1)
+#define CLKMGR_MAINPLL_VCO0_EN_SET_MSK BIT(2)
+#define CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK BIT(3)
+#define CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK BIT(4)
+#define CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK BIT(0)
+#define CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK BIT(1)
+#define CLKMGR_PERPLL_VCO0_EN_SET_MSK BIT(2)
+#define CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK BIT(3)
+#define CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK BIT(4)
+#define CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK BIT(0)
+#define CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK BIT(1)
+#define CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK BIT(2)
+#define CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK BIT(3)
+#define CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK BIT(8)
+#define CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK BIT(9)
+#define CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK BIT(10)
+#define CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK BIT(11)
+#define CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK BIT(0)
+#define CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK 0x00000300
+#define CLKMGR_PERPLL_EN_RESET 0x00000f7f
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK BIT(5)
+#define CLKMGR_MAINPLL_VCO0_PSRC_MSK 0x00000003
+#define CLKMGR_MAINPLL_VCO1_NUMER_MSK 0x00001fff
+#define CLKMGR_MAINPLL_VCO1_DENOM_MSK 0x0000003f
+#define CLKMGR_MAINPLL_CNTRCLK_MSK 0x000003ff
+#define CLKMGR_PERPLL_VCO0_PSRC_MSK 0x00000003
+#define CLKMGR_PERPLL_VCO1_NUMER_MSK 0x00001fff
+#define CLKMGR_PERPLL_VCO1_DENOM_MSK 0x0000003f
+#define CLKMGR_PERPLL_CNTRCLK_MSK 0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MSK 0x00000007
+#define CLKMGR_MAINPLL_MPUCLK_CNT_MSK 0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MAIN 0
+#define CLKMGR_MAINPLL_MPUCLK_SRC_PERI 1
+#define CLKMGR_MAINPLL_MPUCLK_SRC_OSC1 2
+#define CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC 3
+#define CLKMGR_MAINPLL_MPUCLK_SRC_FPGA 4
+#define CLKMGR_MAINPLL_NOCDIV_MSK 0x00000003
+#define CLKMGR_MAINPLL_NOCCLK_CNT_MSK 0x000003ff
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MSK 0x00000007
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MAIN 0
+#define CLKMGR_MAINPLL_NOCCLK_SRC_PERI 1
+#define CLKMGR_MAINPLL_NOCCLK_SRC_OSC1 2
+#define CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC 3
+#define CLKMGR_MAINPLL_NOCCLK_SRC_FPGA 4
+
+#define CLKMGR_PERPLLGRP_SRC_MSK 0x00000007
+#define CLKMGR_PERPLLGRP_SRC_MAIN 0
+#define CLKMGR_PERPLLGRP_SRC_PERI 1
+#define CLKMGR_PERPLLGRP_SRC_OSC1 2
+#define CLKMGR_PERPLLGRP_SRC_INTOSC 3
+#define CLKMGR_PERPLLGRP_SRC_FPGA 4
+
+/* bit shifting macro */
+#define CLKMGR_MAINPLL_VCO0_PSRC_LSB 8
+#define CLKMGR_PERPLL_VCO0_PSRC_LSB 8
+#define CLKMGR_MAINPLL_VCO1_DENOM_LSB 16
+#define CLKMGR_PERPLL_VCO1_DENOM_LSB 16
+#define CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB 16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB 0
+#define CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB 8
+#define CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB 16
+#define CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB 24
+#define CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB 26
+#define CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB 28
+#define CLKMGR_MAINPLL_MPUCLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB 16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR2CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR3CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR4CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR5CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR6CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR8CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB 26
+#define CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB 27
+#define CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB 28
+
+/* PLL ramping work around */
+#define CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ 900000000
+#define CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ 300000000
+#define CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ 100000000
+#define CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ 33000000
+
+#define CLKMGR_STAT_BUSY BIT(0)
+
+#endif /* CLOCK_MANAGER_ARRIA10 */
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h b/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
new file mode 100644
index 0000000..9227dfb
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CLOCK_MANAGER_GEN5_H_
+#define _CLOCK_MANAGER_GEN5_H_
+
+#ifndef __ASSEMBLER__
+
+struct cm_config {
+ /* main group */
+ u32 main_vco_base;
+ u32 mpuclk;
+ u32 mainclk;
+ u32 dbgatclk;
+ u32 mainqspiclk;
+ u32 mainnandsdmmcclk;
+ u32 cfg2fuser0clk;
+ u32 maindiv;
+ u32 dbgdiv;
+ u32 tracediv;
+ u32 l4src;
+
+ /* peripheral group */
+ u32 peri_vco_base;
+ u32 emac0clk;
+ u32 emac1clk;
+ u32 perqspiclk;
+ u32 pernandsdmmcclk;
+ u32 perbaseclk;
+ u32 s2fuser1clk;
+ u32 perdiv;
+ u32 gpiodiv;
+ u32 persrc;
+
+ /* sdram pll group */
+ u32 sdram_vco_base;
+ u32 ddrdqsclk;
+ u32 ddr2xdqsclk;
+ u32 ddrdqclk;
+ u32 s2fuser2clk;
+
+ /* altera group */
+ u32 altera_grp_mpuclk;
+};
+
+struct socfpga_clock_manager_main_pll {
+ u32 vco;
+ u32 misc;
+ u32 mpuclk;
+ u32 mainclk;
+ u32 dbgatclk;
+ u32 mainqspiclk;
+ u32 mainnandsdmmcclk;
+ u32 cfgs2fuser0clk;
+ u32 en;
+ u32 maindiv;
+ u32 dbgdiv;
+ u32 tracediv;
+ u32 l4src;
+ u32 stat;
+ u32 _pad_0x38_0x40[2];
+};
+
+struct socfpga_clock_manager_per_pll {
+ u32 vco;
+ u32 misc;
+ u32 emac0clk;
+ u32 emac1clk;
+ u32 perqspiclk;
+ u32 pernandsdmmcclk;
+ u32 perbaseclk;
+ u32 s2fuser1clk;
+ u32 en;
+ u32 div;
+ u32 gpiodiv;
+ u32 src;
+ u32 stat;
+ u32 _pad_0x34_0x40[3];
+};
+
+struct socfpga_clock_manager_sdr_pll {
+ u32 vco;
+ u32 ctrl;
+ u32 ddrdqsclk;
+ u32 ddr2xdqsclk;
+ u32 ddrdqclk;
+ u32 s2fuser2clk;
+ u32 en;
+ u32 stat;
+};
+
+struct socfpga_clock_manager_altera {
+ u32 mpuclk;
+ u32 mainclk;
+};
+
+struct socfpga_clock_manager {
+ u32 ctrl;
+ u32 bypass;
+ u32 inter;
+ u32 intren;
+ u32 dbctrl;
+ u32 stat;
+ u32 _pad_0x18_0x3f[10];
+ struct socfpga_clock_manager_main_pll main_pll;
+ struct socfpga_clock_manager_per_pll per_pll;
+ struct socfpga_clock_manager_sdr_pll sdr_pll;
+ struct socfpga_clock_manager_altera altera;
+ u32 _pad_0xe8_0x200[70];
+};
+
+/* Clock speed accessors */
+unsigned long cm_get_mpu_clk_hz(void);
+unsigned long cm_get_sdram_clk_hz(void);
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
+
+/* Clock configuration accessors */
+int cm_basic_init(const struct cm_config * const cfg);
+const struct cm_config * const cm_get_default_config(void);
+#endif /* __ASSEMBLER__ */
+
+#define LOCKED_MASK \
+ (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
+ CLKMGR_INTER_PERPLLLOCKED_MASK | \
+ CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
+#define CLKMGR_CTRL_SAFEMODE BIT(0)
+#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
+
+#define CLKMGR_BYPASS_PERPLLSRC BIT(4)
+#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
+#define CLKMGR_BYPASS_PERPLL BIT(3)
+#define CLKMGR_BYPASS_PERPLL_OFFSET 3
+#define CLKMGR_BYPASS_SDRPLLSRC BIT(2)
+#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
+#define CLKMGR_BYPASS_SDRPLL BIT(1)
+#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
+#define CLKMGR_BYPASS_MAINPLL BIT(0)
+#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
+
+#define CLKMGR_INTER_MAINPLLLOST_MASK BIT(3)
+#define CLKMGR_INTER_PERPLLLOST_MASK BIT(4)
+#define CLKMGR_INTER_SDRPLLLOST_MASK BIT(5)
+#define CLKMGR_INTER_MAINPLLLOCKED_MASK BIT(6)
+#define CLKMGR_INTER_PERPLLLOCKED_MASK BIT(7)
+#define CLKMGR_INTER_SDRPLLLOCKED_MASK BIT(8)
+
+#define CLKMGR_STAT_BUSY BIT(0)
+
+/* Main PLL */
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN BIT(0)
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
+#define CLKMGR_MAINPLLGRP_VCO_EN BIT(1)
+#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
+#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN BIT(2)
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
+#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
+
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK BIT(2)
+#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK BIT(4)
+#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK BIT(5)
+#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK BIT(6)
+#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK BIT(7)
+#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK BIT(9)
+
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
+
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
+
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
+
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP BIT(0)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP BIT(1)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
+#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
+#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
+#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
+
+/* Per PLL */
+#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
+#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
+#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
+#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
+#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
+#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
+#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
+#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
+#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
+
+#define CLKMGR_VCO_SSRC_EOSC1 0x0
+#define CLKMGR_VCO_SSRC_EOSC2 0x1
+#define CLKMGR_VCO_SSRC_F2S 0x2
+
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
+
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
+
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
+
+#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
+#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
+#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
+#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
+#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
+#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
+#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
+#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
+#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
+#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
+#define CLKMGR_QSPI_CLK_SRC_PER 0x2
+
+/* SDR PLL */
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL BIT(24)
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
+#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK BIT(31)
+#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
+
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
+
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
+
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
+
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
+
+#endif /* _CLOCK_MANAGER_GEN5_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h
new file mode 100644
index 0000000..0b65783
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/misc.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _MISC_H_
+#define _MISC_H_
+
+void dwmac_deassert_reset(const unsigned int of_reset_id, const u32 phymode);
+
+struct bsel {
+ const char *mode;
+ const char *name;
+};
+
+extern struct bsel bsel_str[];
+
+#ifdef CONFIG_FPGA
+void socfpga_fpga_add(void);
+#else
+static inline void socfpga_fpga_add(void) {}
+#endif
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+unsigned int dedicated_uart_com_port(const void *blob);
+unsigned int shared_uart_com_port(const void *blob);
+unsigned int uart_com_port(const void *blob);
+#endif
+
+#endif /* _MISC_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/pinmux.h b/arch/arm/mach-socfpga/include/mach/pinmux.h
new file mode 100644
index 0000000..563a3db
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/pinmux.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _PINMUX_H_
+#define _PINMUX_H_
+
+#define PINMUX_UART 0xD
+
+#ifndef __ASSEMBLY__
+int config_dedicated_pins(const void *blob);
+int config_pins(const void *blob, const char *pin_grp);
+#endif
+
+#endif /* _PINMUX_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
index 2f070f2..6591745 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
@@ -1,34 +1,17 @@
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef _RESET_MANAGER_H_
-#define _RESET_MANAGER_H_
+#ifndef _RESET_MANAGER_H_
+#define _RESET_MANAGER_H_
void reset_cpu(ulong addr);
-void reset_deassert_peripherals_handoff(void);
-
-void socfpga_bridges_reset(int enable);
void socfpga_per_reset(u32 reset, int set);
void socfpga_per_reset_all(void);
-struct socfpga_reset_manager {
- u32 status;
- u32 ctrl;
- u32 counts;
- u32 padding1;
- u32 mpu_mod_reset;
- u32 per_mod_reset;
- u32 per2_mod_reset;
- u32 brg_mod_reset;
- u32 misc_mod_reset;
- u32 padding2[12];
- u32 tstscratch;
-};
-
#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
#define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2
#else
@@ -55,28 +38,13 @@
#define RSTMGR_BANK(_reset) \
(((_reset) >> RSTMGR_BANK_OFFSET) & RSTMGR_BANK_MASK)
-/*
- * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows:
- * 0 ... mpumodrst
- * 1 ... permodrst
- * 2 ... per2modrst
- * 3 ... brgmodrst
- * 4 ... miscmodrst
- */
-#define RSTMGR_EMAC0 RSTMGR_DEFINE(1, 0)
-#define RSTMGR_EMAC1 RSTMGR_DEFINE(1, 1)
-#define RSTMGR_NAND RSTMGR_DEFINE(1, 4)
-#define RSTMGR_QSPI RSTMGR_DEFINE(1, 5)
-#define RSTMGR_L4WD0 RSTMGR_DEFINE(1, 6)
-#define RSTMGR_OSC1TIMER0 RSTMGR_DEFINE(1, 8)
-#define RSTMGR_UART0 RSTMGR_DEFINE(1, 16)
-#define RSTMGR_SPIM0 RSTMGR_DEFINE(1, 18)
-#define RSTMGR_SPIM1 RSTMGR_DEFINE(1, 19)
-#define RSTMGR_SDMMC RSTMGR_DEFINE(1, 22)
-#define RSTMGR_DMA RSTMGR_DEFINE(1, 28)
-#define RSTMGR_SDR RSTMGR_DEFINE(1, 29)
-
/* Create a human-readable reference to SoCFPGA reset. */
#define SOCFPGA_RESET(_name) RSTMGR_##_name
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/reset_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/reset_manager_arria10.h>
+#endif
+
#endif /* _RESET_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
new file mode 100644
index 0000000..7922db8
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _RESET_MANAGER_ARRIA10_H_
+#define _RESET_MANAGER_ARRIA10_H_
+
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+void socfpga_watchdog_disable(void);
+void socfpga_reset_deassert_noc_ddr_scheduler(void);
+int socfpga_is_wdt_in_reset(void);
+void socfpga_emac_manage_reset(ulong emacbase, u32 state);
+int socfpga_reset_deassert_bridges_handoff(void);
+void socfpga_reset_assert_fpga_connected_peripherals(void);
+void socfpga_reset_deassert_osc1wd0(void);
+void socfpga_reset_uart(int assert);
+int socfpga_bridges_reset(int enable);
+
+struct socfpga_reset_manager {
+ u32 stat;
+ u32 ramstat;
+ u32 miscstat;
+ u32 ctrl;
+ u32 hdsken;
+ u32 hdskreq;
+ u32 hdskack;
+ u32 counts;
+ u32 mpumodrst;
+ u32 per0modrst;
+ u32 per1modrst;
+ u32 brgmodrst;
+ u32 sysmodrst;
+ u32 coldmodrst;
+ u32 nrstmodrst;
+ u32 dbgmodrst;
+ u32 mpuwarmmask;
+ u32 per0warmmask;
+ u32 per1warmmask;
+ u32 brgwarmmask;
+ u32 syswarmmask;
+ u32 nrstwarmmask;
+ u32 l3warmmask;
+ u32 tststa;
+ u32 tstscratch;
+ u32 hdsktimeout;
+ u32 hmcintr;
+ u32 hmcintren;
+ u32 hmcintrens;
+ u32 hmcintrenr;
+ u32 hmcgpout;
+ u32 hmcgpin;
+};
+
+/*
+ * SocFPGA Arria10 reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... per0modrst
+ * 2 ... per1modrst
+ * 3 ... brgmodrst
+ * 4 ... sysmodrst
+ */
+#define RSTMGR_EMAC0 RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1 RSTMGR_DEFINE(1, 1)
+#define RSTMGR_EMAC2 RSTMGR_DEFINE(1, 2)
+#define RSTMGR_NAND RSTMGR_DEFINE(1, 5)
+#define RSTMGR_QSPI RSTMGR_DEFINE(1, 6)
+#define RSTMGR_SDMMC RSTMGR_DEFINE(1, 7)
+#define RSTMGR_DMA RSTMGR_DEFINE(1, 16)
+#define RSTMGR_SPIM0 RSTMGR_DEFINE(1, 17)
+#define RSTMGR_SPIM1 RSTMGR_DEFINE(1, 18)
+#define RSTMGR_L4WD0 RSTMGR_DEFINE(2, 0)
+#define RSTMGR_L4WD1 RSTMGR_DEFINE(2, 1)
+#define RSTMGR_L4SYSTIMER0 RSTMGR_DEFINE(2, 2)
+#define RSTMGR_L4SYSTIMER1 RSTMGR_DEFINE(2, 3)
+#define RSTMGR_SPTIMER0 RSTMGR_DEFINE(2, 4)
+#define RSTMGR_SPTIMER1 RSTMGR_DEFINE(2, 5)
+#define RSTMGR_UART0 RSTMGR_DEFINE(2, 16)
+#define RSTMGR_UART1 RSTMGR_DEFINE(2, 17)
+#define RSTMGR_DDRSCH RSTMGR_DEFINE(3, 6)
+
+#define ALT_RSTMGR_CTL_SWWARMRSTREQ_SET_MSK BIT(1)
+#define ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK BIT(0)
+#define ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK BIT(1)
+#define ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK BIT(2)
+#define ALT_RSTMGR_PER0MODRST_USB0_SET_MSK BIT(3)
+#define ALT_RSTMGR_PER0MODRST_USB1_SET_MSK BIT(4)
+#define ALT_RSTMGR_PER0MODRST_NAND_SET_MSK BIT(5)
+#define ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK BIT(6)
+#define ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK BIT(7)
+#define ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK BIT(8)
+#define ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK BIT(9)
+#define ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK BIT(10)
+#define ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK BIT(11)
+#define ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK BIT(12)
+#define ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK BIT(13)
+#define ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK BIT(14)
+#define ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK BIT(15)
+#define ALT_RSTMGR_PER0MODRST_DMA_SET_MSK BIT(16)
+#define ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK BIT(17)
+#define ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK BIT(18)
+#define ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK BIT(19)
+#define ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK BIT(20)
+#define ALT_RSTMGR_PER0MODRST_DMAECC_SET_MSK BIT(21)
+#define ALT_RSTMGR_PER0MODRST_EMACPTP_SET_MSK BIT(22)
+#define ALT_RSTMGR_PER0MODRST_DMAIF0_SET_MSK BIT(24)
+#define ALT_RSTMGR_PER0MODRST_DMAIF1_SET_MSK BIT(25)
+#define ALT_RSTMGR_PER0MODRST_DMAIF2_SET_MSK BIT(26)
+#define ALT_RSTMGR_PER0MODRST_DMAIF3_SET_MSK BIT(27)
+#define ALT_RSTMGR_PER0MODRST_DMAIF4_SET_MSK BIT(28)
+#define ALT_RSTMGR_PER0MODRST_DMAIF5_SET_MSK BIT(29)
+#define ALT_RSTMGR_PER0MODRST_DMAIF6_SET_MSK BIT(30)
+#define ALT_RSTMGR_PER0MODRST_DMAIF7_SET_MSK BIT(31)
+
+#define ALT_RSTMGR_PER1MODRST_WD0_SET_MSK BIT(0)
+#define ALT_RSTMGR_PER1MODRST_WD1_SET_MSK BIT(1)
+#define ALT_RSTMGR_PER1MODRST_L4SYSTMR0_SET_MSK BIT(2)
+#define ALT_RSTMGR_PER1MODRST_L4SYSTMR1_SET_MSK BIT(3)
+#define ALT_RSTMGR_PER1MODRST_SPTMR0_SET_MSK BIT(4)
+#define ALT_RSTMGR_PER1MODRST_SPTMR1_SET_MSK BIT(5)
+#define ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK BIT(8)
+#define ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK BIT(9)
+#define ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK BIT(10)
+#define ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK BIT(11)
+#define ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK BIT(12)
+#define ALT_RSTMGR_PER1MODRST_UART0_SET_MSK BIT(16)
+#define ALT_RSTMGR_PER1MODRST_UART1_SET_MSK BIT(17)
+#define ALT_RSTMGR_PER1MODRST_GPIO0_SET_MSK BIT(24)
+#define ALT_RSTMGR_PER1MODRST_GPIO1_SET_MSK BIT(25)
+#define ALT_RSTMGR_PER1MODRST_GPIO2_SET_MSK BIT(26)
+
+#define ALT_RSTMGR_BRGMODRST_H2F_SET_MSK BIT(0)
+#define ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK BIT(1)
+#define ALT_RSTMGR_BRGMODRST_F2H_SET_MSK BIT(2)
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK BIT(3)
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK BIT(4)
+#define ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK BIT(5)
+#define ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK BIT(6)
+
+#define ALT_RSTMGR_HDSKEN_SDRSELFREFEN_SET_MSK BIT(0)
+#define ALT_RSTMGR_HDSKEN_FPGAMGRHSEN_SET_MSK BIT(1)
+#define ALT_RSTMGR_HDSKEN_FPGAHSEN_SET_MSK BIT(2)
+#define ALT_RSTMGR_HDSKEN_ETRSTALLEN_SET_MSK BIT(3)
+
+#endif /* _RESET_MANAGER_ARRIA10_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h b/arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h
new file mode 100644
index 0000000..6d9cffe
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager_gen5.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _RESET_MANAGER_GEN5_H_
+#define _RESET_MANAGER_GEN5_H_
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+void reset_deassert_peripherals_handoff(void);
+void socfpga_bridges_reset(int enable);
+
+struct socfpga_reset_manager {
+ u32 status;
+ u32 ctrl;
+ u32 counts;
+ u32 padding1;
+ u32 mpu_mod_reset;
+ u32 per_mod_reset;
+ u32 per2_mod_reset;
+ u32 brg_mod_reset;
+ u32 misc_mod_reset;
+ u32 padding2[12];
+ u32 tstscratch;
+};
+
+/*
+ * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows:
+ * 0 ... mpumodrst
+ * 1 ... permodrst
+ * 2 ... per2modrst
+ * 3 ... brgmodrst
+ * 4 ... miscmodrst
+ */
+#define RSTMGR_EMAC0 RSTMGR_DEFINE(1, 0)
+#define RSTMGR_EMAC1 RSTMGR_DEFINE(1, 1)
+#define RSTMGR_NAND RSTMGR_DEFINE(1, 4)
+#define RSTMGR_QSPI RSTMGR_DEFINE(1, 5)
+#define RSTMGR_L4WD0 RSTMGR_DEFINE(1, 6)
+#define RSTMGR_OSC1TIMER0 RSTMGR_DEFINE(1, 8)
+#define RSTMGR_UART0 RSTMGR_DEFINE(1, 16)
+#define RSTMGR_SPIM0 RSTMGR_DEFINE(1, 18)
+#define RSTMGR_SPIM1 RSTMGR_DEFINE(1, 19)
+#define RSTMGR_SDMMC RSTMGR_DEFINE(1, 22)
+#define RSTMGR_DMA RSTMGR_DEFINE(1, 28)
+#define RSTMGR_SDR RSTMGR_DEFINE(1, 29)
+
+#endif /* _RESET_MANAGER_GEN5_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/sdram_arria10.h b/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
new file mode 100644
index 0000000..1d7b7c1
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/sdram_arria10.h
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2015-2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SOCFPGA_SDRAM_ARRIA10_H_
+#define _SOCFPGA_SDRAM_ARRIA10_H_
+
+#ifndef __ASSEMBLY__
+
+struct socfpga_ecc_hmc {
+ u32 ip_rev_id;
+ u32 _pad_0x4_0x7;
+ u32 ddrioctrl;
+ u32 ddrcalstat;
+ u32 mpr_0beat1;
+ u32 mpr_1beat1;
+ u32 mpr_2beat1;
+ u32 mpr_3beat1;
+ u32 mpr_4beat1;
+ u32 mpr_5beat1;
+ u32 mpr_6beat1;
+ u32 mpr_7beat1;
+ u32 mpr_8beat1;
+ u32 mpr_0beat2;
+ u32 mpr_1beat2;
+ u32 mpr_2beat2;
+ u32 mpr_3beat2;
+ u32 mpr_4beat2;
+ u32 mpr_5beat2;
+ u32 mpr_6beat2;
+ u32 mpr_7beat2;
+ u32 mpr_8beat2;
+ u32 _pad_0x58_0x5f[2];
+ u32 auto_precharge;
+ u32 _pad_0x64_0xff[39];
+ u32 eccctrl;
+ u32 eccctrl2;
+ u32 _pad_0x108_0x10f[2];
+ u32 errinten;
+ u32 errintens;
+ u32 errintenr;
+ u32 intmode;
+ u32 intstat;
+ u32 diaginttest;
+ u32 modstat;
+ u32 derraddra;
+ u32 serraddra;
+ u32 _pad_0x134_0x137;
+ u32 autowb_corraddr;
+ u32 serrcntreg;
+ u32 autowb_drop_cntreg;
+ u32 _pad_0x144_0x147;
+ u32 ecc_reg2wreccdatabus;
+ u32 ecc_rdeccdata2regbus;
+ u32 ecc_reg2rdeccdatabus;
+ u32 _pad_0x154_0x15f[3];
+ u32 ecc_diagon;
+ u32 ecc_decstat;
+ u32 _pad_0x168_0x16f[2];
+ u32 ecc_errgenaddr_0;
+ u32 ecc_errgenaddr_1;
+ u32 ecc_errgenaddr_2;
+ u32 ecc_errgenaddr_3;
+};
+
+struct socfpga_noc_ddr_scheduler {
+ u32 ddr_t_main_scheduler_id_coreid;
+ u32 ddr_t_main_scheduler_id_revisionid;
+ u32 ddr_t_main_scheduler_ddrconf;
+ u32 ddr_t_main_scheduler_ddrtiming;
+ u32 ddr_t_main_scheduler_ddrmode;
+ u32 ddr_t_main_scheduler_readlatency;
+ u32 _pad_0x20_0x34[8];
+ u32 ddr_t_main_scheduler_activate;
+ u32 ddr_t_main_scheduler_devtodev;
+};
+
+/*
+ * OCRAM firewall
+ */
+struct socfpga_noc_fw_ocram {
+ u32 enable;
+ u32 enable_set;
+ u32 enable_clear;
+ u32 region0;
+ u32 region1;
+ u32 region2;
+ u32 region3;
+ u32 region4;
+ u32 region5;
+};
+
+/* for master such as MPU and FPGA */
+struct socfpga_noc_fw_ddr_mpu_fpga2sdram {
+ u32 enable;
+ u32 enable_set;
+ u32 enable_clear;
+ u32 _pad_0xc_0xf;
+ u32 mpuregion0addr;
+ u32 mpuregion1addr;
+ u32 mpuregion2addr;
+ u32 mpuregion3addr;
+ u32 fpga2sdram0region0addr;
+ u32 fpga2sdram0region1addr;
+ u32 fpga2sdram0region2addr;
+ u32 fpga2sdram0region3addr;
+ u32 fpga2sdram1region0addr;
+ u32 fpga2sdram1region1addr;
+ u32 fpga2sdram1region2addr;
+ u32 fpga2sdram1region3addr;
+ u32 fpga2sdram2region0addr;
+ u32 fpga2sdram2region1addr;
+ u32 fpga2sdram2region2addr;
+ u32 fpga2sdram2region3addr;
+};
+
+/* for L3 master */
+struct socfpga_noc_fw_ddr_l3 {
+ u32 enable;
+ u32 enable_set;
+ u32 enable_clear;
+ u32 hpsregion0addr;
+ u32 hpsregion1addr;
+ u32 hpsregion2addr;
+ u32 hpsregion3addr;
+ u32 hpsregion4addr;
+ u32 hpsregion5addr;
+ u32 hpsregion6addr;
+ u32 hpsregion7addr;
+};
+
+struct socfpga_io48_mmr {
+ u32 dbgcfg0;
+ u32 dbgcfg1;
+ u32 dbgcfg2;
+ u32 dbgcfg3;
+ u32 dbgcfg4;
+ u32 dbgcfg5;
+ u32 dbgcfg6;
+ u32 reserve0;
+ u32 reserve1;
+ u32 reserve2;
+ u32 ctrlcfg0;
+ u32 ctrlcfg1;
+ u32 ctrlcfg2;
+ u32 ctrlcfg3;
+ u32 ctrlcfg4;
+ u32 ctrlcfg5;
+ u32 ctrlcfg6;
+ u32 ctrlcfg7;
+ u32 ctrlcfg8;
+ u32 ctrlcfg9;
+ u32 dramtiming0;
+ u32 dramodt0;
+ u32 dramodt1;
+ u32 sbcfg0;
+ u32 sbcfg1;
+ u32 sbcfg2;
+ u32 sbcfg3;
+ u32 sbcfg4;
+ u32 sbcfg5;
+ u32 sbcfg6;
+ u32 sbcfg7;
+ u32 caltiming0;
+ u32 caltiming1;
+ u32 caltiming2;
+ u32 caltiming3;
+ u32 caltiming4;
+ u32 caltiming5;
+ u32 caltiming6;
+ u32 caltiming7;
+ u32 caltiming8;
+ u32 caltiming9;
+ u32 caltiming10;
+ u32 dramaddrw;
+ u32 sideband0;
+ u32 sideband1;
+ u32 sideband2;
+ u32 sideband3;
+ u32 sideband4;
+ u32 sideband5;
+ u32 sideband6;
+ u32 sideband7;
+ u32 sideband8;
+ u32 sideband9;
+ u32 sideband10;
+ u32 sideband11;
+ u32 sideband12;
+ u32 sideband13;
+ u32 sideband14;
+ u32 sideband15;
+ u32 dramsts;
+ u32 dbgdone;
+ u32 dbgsignals;
+ u32 dbgreset;
+ u32 dbgmatch;
+ u32 counter0mask;
+ u32 counter1mask;
+ u32 counter0match;
+ u32 counter1match;
+ u32 niosreserve0;
+ u32 niosreserve1;
+ u32 niosreserve2;
+};
+#endif /*__ASSEMBLY__*/
+
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_MASK 0x1F000000
+#define IO48_MMR_CTRLCFG0_DB2_BURST_LENGTH_SHIFT 24
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_MASK 0x00F80000
+#define IO48_MMR_CTRLCFG0_DB1_BURST_LENGTH_SHIFT 19
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_MASK 0x0007C000
+#define IO48_MMR_CTRLCFG0_DB0_BURST_LENGTH_SHIFT 14
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_MASK 0x00003E00
+#define IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_SHIFT 9
+#define IO48_MMR_CTRLCFG0_AC_POS_MASK 0x00000180
+#define IO48_MMR_CTRLCFG0_AC_POS_SHIFT 7
+#define IO48_MMR_CTRLCFG0_DIMM_TYPE_MASK 0x00000070
+#define IO48_MMR_CTRLCFG0_DIM_TYPE_SHIFT 4
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_MASK 0x0000000F
+#define IO48_MMR_CTRLCFG0_MEM_TYPE_SHIFT 0
+
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_DM BIT(30)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_DM BIT(29)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_DM BIT(28)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_DM BIT(27)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_DM BIT(26)
+#define IO48_MMR_CTRLCFG1_DQSTRK_EN BIT(25)
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_MASK 0x01F80000
+#define IO48_MMR_CTRLCFG1_STARVE_LIMIT_SHIFT 19
+#define IO48_MMR_CTRLCFG1_REORDER_READ BIT(18)
+#define IO48_MMR_CTRLCFG1_DBC3_REORDER_RDATA BIT(17)
+#define IO48_MMR_CTRLCFG1_DBC2_REORDER_RDATA BIT(16)
+#define IO48_MMR_CTRLCFG1_DBC1_REORDER_RDATA BIT(15)
+#define IO48_MMR_CTRLCFG1_DBC0_REORDER_RDATA BIT(14)
+#define IO48_MMR_CTRLCFG1_CTRL_REORDER_RDATA BIT(13)
+#define IO48_MMR_CTRLCFG1_REORDER_DATA BIT(12)
+#define IO48_MMR_CTRLCFG1_DBC3_ENABLE_ECC BIT(11)
+#define IO48_MMR_CTRLCFG1_DBC2_ENABLE_ECC BIT(10)
+#define IO48_MMR_CTRLCFG1_DBC1_ENABLE_ECC BIT(9)
+#define IO48_MMR_CTRLCFG1_DBC0_ENABLE_ECC BIT(8)
+#define IO48_MMR_CTRLCFG1_CTRL_ENABLE_ECC BIT(7)
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_MASK 0x00000060
+#define IO48_MMR_CTRLCFG1_ADDR_ORDER_SHIFT 5
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_MASK 0x0000001F
+#define IO48_MMR_CTRLCFG1_DBC3_BURST_LENGTH_SHIFT 0
+
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_MASK 0x3F000000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BG_SHIFT 24
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_MASK 0x00FC0000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_SHIFT 18
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_MASK 0x0003F000
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_SHIFT 12
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_MASK 0x00000FC0
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_PCH_SHIFT 6
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_MASK 0x0000003F
+#define IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_SHIFT 0
+
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_MASK 0x3F000000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_SHIFT 24
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_MASK 0x00FC0000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_WR_SHIFT 18
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_MASK 0x0003F000
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DB_SHIFT 12
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_MASK 0x00000FC0
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_SHIFT 6
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_MASK 0x0000003F
+#define IO48_MMR_CALTIMING1_CFG_RD_TO_RD_SHIFT 0
+
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_MASK 0x3F000000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_DIFF_CHIP_SHIFT 24
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_MASK 0x00FC0000
+#define IO48_MMR_CALTIMING2_CFG_WR_TO_WR_SHIFT 18
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_MASK 0x0003F000
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_AP_VALID_SHIFT 12
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_MASK 0x00000FC0
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_SHIFT 6
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_MASK 0x0000003F
+#define IO48_MMR_CALTIMING2_CFG_RD_TO_WR_DIFF_BG_SHIFT 0
+
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_MASK 0x3F000000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_PCH_SHIFT 24
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_MASK 0x00FC0000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_BG_SHIFT 18
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_MASK 0x0003F000
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_SHIFT 12
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_MASK 0x00000FC0
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_RD_SHIFT 6
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_MASK 0x0000003F
+#define IO48_MMR_CALTIMING3_CFG_WR_TO_WR_DIFF_BG_SHIFT 0
+
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_MASK 0xFC000000
+#define IO48_MMR_CALTIMING4_CFG_PDN_TO_VALID_SHIFT 26
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_MASK 0x03FC0000
+#define IO48_MMR_CALTIMING4_CFG_ARF_TO_VALID_SHIFT 18
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_MASK 0x0003F000
+#define IO48_MMR_CALTIMING4_CFG_PCH_ALL_TO_VALID_SHIFT 12
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_MASK 0x00000FC0
+#define IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_SHIFT 6
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_MASK 0x0000003F
+#define IO48_MMR_CALTIMING4_CFG_WR_AP_TO_VALID_SHIFT 0
+
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_MASK 0x000000FF
+#define IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_SHIFT 0
+
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_MASK 0x00070000
+#define IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_SHIFT 16
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK 0x0000C000
+#define IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT 14
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK 0x00003C00
+#define IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT 10
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK 0x000003E0
+#define IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT 5
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK 0x0000001F
+#define IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_SHIFT 0
+
+#define ALT_ECC_HMC_OCP_DDRIOCTRL_IO_SIZE_MSK 0x00000003
+
+#define ALT_ECC_HMC_OCP_INTSTAT_SERRPENA_SET_MSK BIT(0)
+#define ALT_ECC_HMC_OCP_INTSTAT_DERRPENA_SET_MSK BIT(1)
+#define ALT_ECC_HMC_OCP_ERRINTEN_SERRINTEN_SET_MSK BIT(0)
+#define ALT_ECC_HMC_OCP_ERRINTEN_DERRINTEN_SET_MSK BIT(1)
+#define ALT_ECC_HMC_OCP_INTMOD_INTONCMP_SET_MSK BIT(16)
+#define ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK BIT(16)
+#define ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK BIT(8)
+#define ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK BIT(0)
+#define ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK BIT(8)
+#define ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK BIT(0)
+
+#define ALT_ECC_HMC_OCP_SERRCNTREG_VALUE 8
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_ACTTOACT_LSB 0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOMISS_LSB 6
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTOMISS_LSB 12
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BURSTLEN_LSB 18
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOWR_LSB 21
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTORD_LSB 26
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BWRATIO_LSB 31
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_AUTOPRECHARGE_LSB 0
+#define ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_BWRATIOEXTENDED_LSB 1
+
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_RRD_LSB 0
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAW_LSB 4
+#define ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAWBANK_LSB 10
+
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTORD_LSB 0
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTOWR_LSB 2
+#define ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSWRTORD_LSB 4
+
+#define ALT_NOC_FW_DDR_END_ADDR_LSB 16
+#define ALT_NOC_FW_DDR_ADDR_MASK 0xFFFF
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG0EN_SET_MSK BIT(0)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG1EN_SET_MSK BIT(1)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG2EN_SET_MSK BIT(2)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG3EN_SET_MSK BIT(3)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG4EN_SET_MSK BIT(4)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG5EN_SET_MSK BIT(5)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG6EN_SET_MSK BIT(6)
+#define ALT_NOC_FW_DDR_SCR_EN_HPSREG7EN_SET_MSK BIT(7)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK BIT(0)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK BIT(1)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG2EN_SET_MSK BIT(2)
+#define ALT_NOC_FW_DDR_SCR_EN_MPUREG3EN_SET_MSK BIT(3)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG0EN_SET_MSK BIT(4)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG1EN_SET_MSK BIT(5)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG2EN_SET_MSK BIT(6)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG3EN_SET_MSK BIT(7)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG0EN_SET_MSK BIT(8)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG1EN_SET_MSK BIT(9)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG2EN_SET_MSK BIT(10)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG3EN_SET_MSK BIT(11)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG0EN_SET_MSK BIT(12)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG1EN_SET_MSK BIT(13)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG2EN_SET_MSK BIT(14)
+#define ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG3EN_SET_MSK BIT(15)
+
+#define ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK 0x0000003F
+#endif /* _SOCFPGA_SDRAM_ARRIA10_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/system_manager.h b/arch/arm/mach-socfpga/include/mach/system_manager.h
index c45edea..e6d4280 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -1,139 +1,24 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef _SYSTEM_MANAGER_H_
-#define _SYSTEM_MANAGER_H_
+#ifndef _SYSTEM_MANAGER_H_
+#define _SYSTEM_MANAGER_H_
-#ifndef __ASSEMBLY__
-
-void sysmgr_pinmux_init(void);
-void sysmgr_config_warmrstcfgio(int enable);
-
-void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len);
-#endif
-
-struct socfpga_system_manager {
- /* System Manager Module */
- u32 siliconid1; /* 0x00 */
- u32 siliconid2;
- u32 _pad_0x8_0xf[2];
- u32 wddbg; /* 0x10 */
- u32 bootinfo;
- u32 hpsinfo;
- u32 parityinj;
- /* FPGA Interface Group */
- u32 fpgaintfgrp_gbl; /* 0x20 */
- u32 fpgaintfgrp_indiv;
- u32 fpgaintfgrp_module;
- u32 _pad_0x2c_0x2f;
- /* Scan Manager Group */
- u32 scanmgrgrp_ctrl; /* 0x30 */
- u32 _pad_0x34_0x3f[3];
- /* Freeze Control Group */
- u32 frzctrl_vioctrl; /* 0x40 */
- u32 _pad_0x44_0x4f[3];
- u32 frzctrl_hioctrl; /* 0x50 */
- u32 frzctrl_src;
- u32 frzctrl_hwctrl;
- u32 _pad_0x5c_0x5f;
- /* EMAC Group */
- u32 emacgrp_ctrl; /* 0x60 */
- u32 emacgrp_l3master;
- u32 _pad_0x68_0x6f[2];
- /* DMA Controller Group */
- u32 dmagrp_ctrl; /* 0x70 */
- u32 dmagrp_persecurity;
- u32 _pad_0x78_0x7f[2];
- /* Preloader (initial software) Group */
- u32 iswgrp_handoff[8]; /* 0x80 */
- u32 _pad_0xa0_0xbf[8]; /* 0xa0 */
- /* Boot ROM Code Register Group */
- u32 romcodegrp_ctrl; /* 0xc0 */
- u32 romcodegrp_cpu1startaddr;
- u32 romcodegrp_initswstate;
- u32 romcodegrp_initswlastld;
- u32 romcodegrp_bootromswstate; /* 0xd0 */
- u32 __pad_0xd4_0xdf[3];
- /* Warm Boot from On-Chip RAM Group */
- u32 romcodegrp_warmramgrp_enable; /* 0xe0 */
- u32 romcodegrp_warmramgrp_datastart;
- u32 romcodegrp_warmramgrp_length;
- u32 romcodegrp_warmramgrp_execution;
- u32 romcodegrp_warmramgrp_crc; /* 0xf0 */
- u32 __pad_0xf4_0xff[3];
- /* Boot ROM Hardware Register Group */
- u32 romhwgrp_ctrl; /* 0x100 */
- u32 _pad_0x104_0x107;
- /* SDMMC Controller Group */
- u32 sdmmcgrp_ctrl;
- u32 sdmmcgrp_l3master;
- /* NAND Flash Controller Register Group */
- u32 nandgrp_bootstrap; /* 0x110 */
- u32 nandgrp_l3master;
- /* USB Controller Group */
- u32 usbgrp_l3master;
- u32 _pad_0x11c_0x13f[9];
- /* ECC Management Register Group */
- u32 eccgrp_l2; /* 0x140 */
- u32 eccgrp_ocram;
- u32 eccgrp_usb0;
- u32 eccgrp_usb1;
- u32 eccgrp_emac0; /* 0x150 */
- u32 eccgrp_emac1;
- u32 eccgrp_dma;
- u32 eccgrp_can0;
- u32 eccgrp_can1; /* 0x160 */
- u32 eccgrp_nand;
- u32 eccgrp_qspi;
- u32 eccgrp_sdmmc;
- u32 _pad_0x170_0x3ff[164];
- /* Pin Mux Control Group */
- u32 emacio[20]; /* 0x400 */
- u32 flashio[12]; /* 0x450 */
- u32 generalio[28]; /* 0x480 */
- u32 _pad_0x4f0_0x4ff[4];
- u32 mixed1io[22]; /* 0x500 */
- u32 mixed2io[8]; /* 0x558 */
- u32 gplinmux[23]; /* 0x578 */
- u32 gplmux[71]; /* 0x5d4 */
- u32 nandusefpga; /* 0x6f0 */
- u32 _pad_0x6f4;
- u32 rgmii1usefpga; /* 0x6f8 */
- u32 _pad_0x6fc_0x700[2];
- u32 i2c0usefpga; /* 0x704 */
- u32 sdmmcusefpga; /* 0x708 */
- u32 _pad_0x70c_0x710[2];
- u32 rgmii0usefpga; /* 0x714 */
- u32 _pad_0x718_0x720[3];
- u32 i2c3usefpga; /* 0x724 */
- u32 i2c2usefpga; /* 0x728 */
- u32 i2c1usefpga; /* 0x72c */
- u32 spim1usefpga; /* 0x730 */
- u32 _pad_0x734;
- u32 spim0usefpga; /* 0x738 */
-};
-
-#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX (1 << 0)
-#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO (1 << 1)
-#define SYSMGR_ECC_OCRAM_EN (1 << 0)
-#define SYSMGR_ECC_OCRAM_SERR (1 << 3)
-#define SYSMGR_ECC_OCRAM_DERR (1 << 4)
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX BIT(0)
+#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO BIT(1)
+#define SYSMGR_ECC_OCRAM_EN BIT(0)
+#define SYSMGR_ECC_OCRAM_SERR BIT(3)
+#define SYSMGR_ECC_OCRAM_DERR BIT(4)
#define SYSMGR_FPGAINTF_USEFPGA 0x1
-#define SYSMGR_FPGAINTF_SPIM0 (1 << 0)
-#define SYSMGR_FPGAINTF_SPIM1 (1 << 1)
-#define SYSMGR_FPGAINTF_EMAC0 (1 << 2)
-#define SYSMGR_FPGAINTF_EMAC1 (1 << 3)
-#define SYSMGR_FPGAINTF_NAND (1 << 4)
-#define SYSMGR_FPGAINTF_SDMMC (1 << 5)
-
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-#define SYSMGR_SDMMC_SMPLSEL_SHIFT 3
-#else
-#define SYSMGR_SDMMC_SMPLSEL_SHIFT 4
-#endif
+#define SYSMGR_FPGAINTF_SPIM0 BIT(0)
+#define SYSMGR_FPGAINTF_SPIM1 BIT(1)
+#define SYSMGR_FPGAINTF_EMAC0 BIT(2)
+#define SYSMGR_FPGAINTF_EMAC1 BIT(3)
+#define SYSMGR_FPGAINTF_NAND BIT(4)
+#define SYSMGR_FPGAINTF_SDMMC BIT(5)
#define SYSMGR_SDMMC_DRVSEL_SHIFT 0
@@ -146,4 +31,63 @@
#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x3
+/* For dedicated IO configuration */
+/* Voltage select enums */
+#define VOLTAGE_SEL_3V 0x0
+#define VOLTAGE_SEL_1P8V 0x1
+#define VOLTAGE_SEL_2P5V 0x2
+
+/* Input buffer enable */
+#define INPUT_BUF_DISABLE 0
+#define INPUT_BUF_1P8V 1
+#define INPUT_BUF_2P5V3V 2
+
+/* Weak pull up enable */
+#define WK_PU_DISABLE 0
+#define WK_PU_ENABLE 1
+
+/* Pull up slew rate control */
+#define PU_SLW_RT_SLOW 0
+#define PU_SLW_RT_FAST 1
+#define PU_SLW_RT_DEFAULT PU_SLW_RT_SLOW
+
+/* Pull down slew rate control */
+#define PD_SLW_RT_SLOW 0
+#define PD_SLW_RT_FAST 1
+#define PD_SLW_RT_DEFAULT PD_SLW_RT_SLOW
+
+/* Drive strength control */
+#define PU_DRV_STRG_DEFAULT 0x10
+#define PD_DRV_STRG_DEFAULT 0x10
+
+/* bit position */
+#define PD_DRV_STRG_LSB 0
+#define PD_SLW_RT_LSB 5
+#define PU_DRV_STRG_LSB 8
+#define PU_SLW_RT_LSB 13
+#define WK_PU_LSB 16
+#define INPUT_BUF_LSB 17
+#define BIAS_TRIM_LSB 19
+#define VOLTAGE_SEL_LSB 0
+
+#define ALT_SYSMGR_NOC_H2F_SET_MSK BIT(0)
+#define ALT_SYSMGR_NOC_LWH2F_SET_MSK BIT(4)
+#define ALT_SYSMGR_NOC_F2H_SET_MSK BIT(8)
+#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK BIT(16)
+#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK BIT(20)
+#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK BIT(24)
+#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK BIT(0)
+
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK BIT(1)
+#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK BIT(1)
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/system_manager_gen5.h>
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/system_manager_arria10.h>
+#endif
+
+#define SYSMGR_GET_BOOTINFO_BSEL(bsel) \
+ (((bsel) >> SYSMGR_BOOTINFO_BSEL_SHIFT) & 7)
+
#endif /* _SYSTEM_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/system_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/system_manager_arria10.h
new file mode 100644
index 0000000..f235aba
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/system_manager_arria10.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SYSTEM_MANAGER_ARRIA10_H_
+#define _SYSTEM_MANAGER_ARRIA10_H_
+
+struct socfpga_system_manager {
+ u32 siliconid1;
+ u32 siliconid2;
+ u32 wddbg;
+ u32 bootinfo;
+ u32 mpu_ctrl_l2_ecc;
+ u32 _pad_0x14_0x1f[3];
+ u32 dma;
+ u32 dma_periph;
+ u32 sdmmcgrp_ctrl;
+ u32 sdmmc_l3master;
+ u32 nand_bootstrap;
+ u32 nand_l3master;
+ u32 usb0_l3master;
+ u32 usb1_l3master;
+ u32 emac_global;
+ u32 emac[3];
+ u32 _pad_0x50_0x5f[4];
+ u32 fpgaintf_en_global;
+ u32 fpgaintf_en_0;
+ u32 fpgaintf_en_1;
+ u32 fpgaintf_en_2;
+ u32 fpgaintf_en_3;
+ u32 _pad_0x74_0x7f[3];
+ u32 noc_addr_remap_value;
+ u32 noc_addr_remap_set;
+ u32 noc_addr_remap_clear;
+ u32 _pad_0x8c_0x8f;
+ u32 ecc_intmask_value;
+ u32 ecc_intmask_set;
+ u32 ecc_intmask_clr;
+ u32 ecc_intstatus_serr;
+ u32 ecc_intstatus_derr;
+ u32 mpu_status_l2_ecc;
+ u32 mpu_clear_l2_ecc;
+ u32 mpu_status_l1_parity;
+ u32 mpu_clear_l1_parity;
+ u32 mpu_set_l1_parity;
+ u32 _pad_0xb8_0xbf[2];
+ u32 noc_timeout;
+ u32 noc_idlereq_set;
+ u32 noc_idlereq_clr;
+ u32 noc_idlereq_value;
+ u32 noc_idleack;
+ u32 noc_idlestatus;
+ u32 fpga2soc_ctrl;
+ u32 _pad_0xdc_0xff[9];
+ u32 tsmc_tsel_0;
+ u32 tsmc_tsel_1;
+ u32 tsmc_tsel_2;
+ u32 tsmc_tsel_3;
+ u32 _pad_0x110_0x200[60];
+ u32 romhw_ctrl;
+ u32 romcode_ctrl;
+ u32 romcode_cpu1startaddr;
+ u32 romcode_initswstate;
+ u32 romcode_initswlastld;
+ u32 _pad_0x214_0x217;
+ u32 warmram_enable;
+ u32 warmram_datastart;
+ u32 warmram_length;
+ u32 warmram_execution;
+ u32 warmram_crc;
+ u32 _pad_0x22c_0x22f;
+ u32 isw_handoff[8];
+ u32 romcode_bootromswstate[8];
+};
+
+#define SYSMGR_SDMMC_SMPLSEL_SHIFT 4
+#define SYSMGR_BOOTINFO_BSEL_SHIFT 12
+
+#endif /* _SYSTEM_MANAGER_ARRIA10_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/system_manager_gen5.h b/arch/arm/mach-socfpga/include/mach/system_manager_gen5.h
new file mode 100644
index 0000000..285c1a2
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/system_manager_gen5.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SYSTEM_MANAGER_GEN5_H_
+#define _SYSTEM_MANAGER_GEN5_H_
+
+#ifndef __ASSEMBLY__
+
+void sysmgr_pinmux_init(void);
+void sysmgr_config_warmrstcfgio(int enable);
+
+void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len);
+
+struct socfpga_system_manager {
+ /* System Manager Module */
+ u32 siliconid1; /* 0x00 */
+ u32 siliconid2;
+ u32 _pad_0x8_0xf[2];
+ u32 wddbg; /* 0x10 */
+ u32 bootinfo;
+ u32 hpsinfo;
+ u32 parityinj;
+ /* FPGA Interface Group */
+ u32 fpgaintfgrp_gbl; /* 0x20 */
+ u32 fpgaintfgrp_indiv;
+ u32 fpgaintfgrp_module;
+ u32 _pad_0x2c_0x2f;
+ /* Scan Manager Group */
+ u32 scanmgrgrp_ctrl; /* 0x30 */
+ u32 _pad_0x34_0x3f[3];
+ /* Freeze Control Group */
+ u32 frzctrl_vioctrl; /* 0x40 */
+ u32 _pad_0x44_0x4f[3];
+ u32 frzctrl_hioctrl; /* 0x50 */
+ u32 frzctrl_src;
+ u32 frzctrl_hwctrl;
+ u32 _pad_0x5c_0x5f;
+ /* EMAC Group */
+ u32 emacgrp_ctrl; /* 0x60 */
+ u32 emacgrp_l3master;
+ u32 _pad_0x68_0x6f[2];
+ /* DMA Controller Group */
+ u32 dmagrp_ctrl; /* 0x70 */
+ u32 dmagrp_persecurity;
+ u32 _pad_0x78_0x7f[2];
+ /* Preloader (initial software) Group */
+ u32 iswgrp_handoff[8]; /* 0x80 */
+ u32 _pad_0xa0_0xbf[8]; /* 0xa0 */
+ /* Boot ROM Code Register Group */
+ u32 romcodegrp_ctrl; /* 0xc0 */
+ u32 romcodegrp_cpu1startaddr;
+ u32 romcodegrp_initswstate;
+ u32 romcodegrp_initswlastld;
+ u32 romcodegrp_bootromswstate; /* 0xd0 */
+ u32 __pad_0xd4_0xdf[3];
+ /* Warm Boot from On-Chip RAM Group */
+ u32 romcodegrp_warmramgrp_enable; /* 0xe0 */
+ u32 romcodegrp_warmramgrp_datastart;
+ u32 romcodegrp_warmramgrp_length;
+ u32 romcodegrp_warmramgrp_execution;
+ u32 romcodegrp_warmramgrp_crc; /* 0xf0 */
+ u32 __pad_0xf4_0xff[3];
+ /* Boot ROM Hardware Register Group */
+ u32 romhwgrp_ctrl; /* 0x100 */
+ u32 _pad_0x104_0x107;
+ /* SDMMC Controller Group */
+ u32 sdmmcgrp_ctrl;
+ u32 sdmmcgrp_l3master;
+ /* NAND Flash Controller Register Group */
+ u32 nandgrp_bootstrap; /* 0x110 */
+ u32 nandgrp_l3master;
+ /* USB Controller Group */
+ u32 usbgrp_l3master;
+ u32 _pad_0x11c_0x13f[9];
+ /* ECC Management Register Group */
+ u32 eccgrp_l2; /* 0x140 */
+ u32 eccgrp_ocram;
+ u32 eccgrp_usb0;
+ u32 eccgrp_usb1;
+ u32 eccgrp_emac0; /* 0x150 */
+ u32 eccgrp_emac1;
+ u32 eccgrp_dma;
+ u32 eccgrp_can0;
+ u32 eccgrp_can1; /* 0x160 */
+ u32 eccgrp_nand;
+ u32 eccgrp_qspi;
+ u32 eccgrp_sdmmc;
+ u32 _pad_0x170_0x3ff[164];
+ /* Pin Mux Control Group */
+ u32 emacio[20]; /* 0x400 */
+ u32 flashio[12]; /* 0x450 */
+ u32 generalio[28]; /* 0x480 */
+ u32 _pad_0x4f0_0x4ff[4];
+ u32 mixed1io[22]; /* 0x500 */
+ u32 mixed2io[8]; /* 0x558 */
+ u32 gplinmux[23]; /* 0x578 */
+ u32 gplmux[71]; /* 0x5d4 */
+ u32 nandusefpga; /* 0x6f0 */
+ u32 _pad_0x6f4;
+ u32 rgmii1usefpga; /* 0x6f8 */
+ u32 _pad_0x6fc_0x700[2];
+ u32 i2c0usefpga; /* 0x704 */
+ u32 sdmmcusefpga; /* 0x708 */
+ u32 _pad_0x70c_0x710[2];
+ u32 rgmii0usefpga; /* 0x714 */
+ u32 _pad_0x718_0x720[3];
+ u32 i2c3usefpga; /* 0x724 */
+ u32 i2c2usefpga; /* 0x728 */
+ u32 i2c1usefpga; /* 0x72c */
+ u32 spim1usefpga; /* 0x730 */
+ u32 _pad_0x734;
+ u32 spim0usefpga; /* 0x738 */
+};
+#endif
+
+#define SYSMGR_SDMMC_SMPLSEL_SHIFT 3
+#define SYSMGR_BOOTINFO_BSEL_SHIFT 0
+
+#endif /* _SYSTEM_MANAGER_GEN5_H_ */
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index dd6b53b..00eff90 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -13,6 +13,7 @@
#include <miiphy.h>
#include <netdev.h>
#include <watchdog.h>
+#include <asm/arch/misc.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/system_manager.h>
@@ -20,20 +21,21 @@
#include <asm/arch/scu.h>
#include <asm/pl310.h>
-#include <dt-bindings/reset/altr,rst-mgr.h>
-
DECLARE_GLOBAL_DATA_PTR;
-static struct pl310_regs *const pl310 =
+static const struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
-static struct socfpga_system_manager *sysmgr_regs =
- (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
-static struct socfpga_reset_manager *reset_manager_base =
- (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
-static struct nic301_registers *nic301_regs =
- (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
-static struct scu_registers *scu_regs =
- (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
+
+struct bsel bsel_str[] = {
+ { "rsvd", "Reserved", },
+ { "fpga", "FPGA (HPS2FPGA Bridge)", },
+ { "nand", "NAND Flash (1.8V)", },
+ { "nand", "NAND Flash (3.0V)", },
+ { "sd", "SD/MMC External Transceiver (1.8V)", },
+ { "sd", "SD/MMC Internal Transceiver (3.0V)", },
+ { "qspi", "QSPI Flash (1.8V)", },
+ { "qspi", "QSPI Flash (3.0V)", },
+};
int dram_init(void)
{
@@ -72,207 +74,6 @@
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
-/*
- * DesignWare Ethernet initialization
- */
-#ifdef CONFIG_ETH_DESIGNWARE
-static void dwmac_deassert_reset(const unsigned int of_reset_id,
- const u32 phymode)
-{
- u32 physhift, reset;
-
- if (of_reset_id == EMAC0_RESET) {
- physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
- reset = SOCFPGA_RESET(EMAC0);
- } else if (of_reset_id == EMAC1_RESET) {
- physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
- reset = SOCFPGA_RESET(EMAC1);
- } else {
- printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
- return;
- }
-
- /* Clearing emac0 PHY interface select to 0 */
- clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
- SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
-
- /* configure to PHY interface select choosed */
- setbits_le32(&sysmgr_regs->emacgrp_ctrl,
- phymode << physhift);
-
- /* Release the EMAC controller from reset */
- socfpga_per_reset(reset, 0);
-}
-
-static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
-{
- if (!phymode)
- return -EINVAL;
-
- if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
- *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
- return 0;
- }
-
- if (!strcmp(phymode, "rgmii")) {
- *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
- return 0;
- }
-
- if (!strcmp(phymode, "rmii")) {
- *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int socfpga_eth_reset(void)
-{
- const void *fdt = gd->fdt_blob;
- struct fdtdec_phandle_args args;
- const char *phy_mode;
- u32 phy_modereg;
- int nodes[2]; /* Max. two GMACs */
- int ret, count;
- int i, node;
-
- /* Put both GMACs into RESET state. */
- socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
- socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
-
- count = fdtdec_find_aliases_for_id(fdt, "ethernet",
- COMPAT_ALTERA_SOCFPGA_DWMAC,
- nodes, ARRAY_SIZE(nodes));
- for (i = 0; i < count; i++) {
- node = nodes[i];
- if (node <= 0)
- continue;
-
- ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
- "#reset-cells", 1, 0,
- &args);
- if (ret || (args.args_count != 1)) {
- debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
- continue;
- }
-
- phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
- ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
- if (ret) {
- debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
- continue;
- }
-
- dwmac_deassert_reset(args.args[0], phy_modereg);
- }
-
- return 0;
-}
-#else
-static int socfpga_eth_reset(void)
-{
- return 0;
-};
-#endif
-
-struct {
- const char *mode;
- const char *name;
-} bsel_str[] = {
- { "rsvd", "Reserved", },
- { "fpga", "FPGA (HPS2FPGA Bridge)", },
- { "nand", "NAND Flash (1.8V)", },
- { "nand", "NAND Flash (3.0V)", },
- { "sd", "SD/MMC External Transceiver (1.8V)", },
- { "sd", "SD/MMC Internal Transceiver (3.0V)", },
- { "qspi", "QSPI Flash (1.8V)", },
- { "qspi", "QSPI Flash (3.0V)", },
-};
-
-static const struct {
- const u16 pn;
- const char *name;
- const char *var;
-} const socfpga_fpga_model[] = {
- /* Cyclone V E */
- { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
- { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
- { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
- { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
- { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
- /* Cyclone V GX/GT */
- { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
- { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
- { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
- { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
- { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
- /* Cyclone V SE/SX/ST */
- { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
- { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
- { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
- { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
- /* Arria V */
- { 0x2d03, "Arria V, D5", "av_d5" },
-};
-
-static int socfpga_fpga_id(const bool print_id)
-{
- const u32 altera_mi = 0x6e;
- const u32 id = scan_mgr_get_fpga_id();
-
- const u32 lsb = id & 0x00000001;
- const u32 mi = (id >> 1) & 0x000007ff;
- const u32 pn = (id >> 12) & 0x0000ffff;
- const u32 version = (id >> 28) & 0x0000000f;
- int i;
-
- if ((mi != altera_mi) || (lsb != 1)) {
- printf("FPGA: Not Altera chip ID\n");
- return -EINVAL;
- }
-
- for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
- if (pn == socfpga_fpga_model[i].pn)
- break;
-
- if (i == ARRAY_SIZE(socfpga_fpga_model)) {
- printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id);
- return -EINVAL;
- }
-
- if (print_id)
- printf("FPGA: Altera %s, version 0x%01x\n",
- socfpga_fpga_model[i].name, version);
- return i;
-}
-
-/*
- * Print CPU information
- */
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
- const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
- puts("CPU: Altera SoCFPGA Platform\n");
- socfpga_fpga_id(1);
- printf("BOOT: %s\n", bsel_str[bsel].name);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_MISC_INIT
-int arch_misc_init(void)
-{
- const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
- const int fpga_id = socfpga_fpga_id(0);
- setenv("bootmode", bsel_str[bsel].mode);
- if (fpga_id >= 0)
- setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
- return socfpga_eth_reset();
-}
-#endif
-
#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
int overwrite_console(void)
@@ -303,15 +104,13 @@
};
/* add device descriptor to FPGA device table */
-static void socfpga_fpga_add(void)
+void socfpga_fpga_add(void)
{
int i;
fpga_init();
for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
fpga_add(fpga_altera, &altera_fpga[i]);
}
-#else
-static inline void socfpga_fpga_add(void) {}
#endif
int arch_cpu_init(void)
@@ -337,135 +136,3 @@
return 0;
}
-
-/*
- * Convert all NIC-301 AMBA slaves from secure to non-secure
- */
-static void socfpga_nic301_slave_ns(void)
-{
- writel(0x1, &nic301_regs->lwhps2fpgaregs);
- writel(0x1, &nic301_regs->hps2fpgaregs);
- writel(0x1, &nic301_regs->acp);
- writel(0x1, &nic301_regs->rom);
- writel(0x1, &nic301_regs->ocram);
- writel(0x1, &nic301_regs->sdrdata);
-}
-
-static uint32_t iswgrp_handoff[8];
-
-int arch_early_init_r(void)
-{
- int i;
-
- /*
- * Write magic value into magic register to unlock support for
- * issuing warm reset. The ancient kernel code expects this
- * value to be written into the register by the bootloader, so
- * to support that old code, we write it here instead of in the
- * reset_cpu() function just before resetting the CPU.
- */
- writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
-
- for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
- iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
-
- socfpga_bridges_reset(1);
- socfpga_nic301_slave_ns();
-
- /*
- * Private components security:
- * U-Boot : configure private timer, global timer and cpu component
- * access as non secure for kernel stage (as required by Linux)
- */
- setbits_le32(&scu_regs->sacr, 0xfff);
-
- /* Configure the L2 controller to make SDRAM start at 0 */
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
- writel(0x2, &nic301_regs->remap);
-#else
- writel(0x1, &nic301_regs->remap); /* remap.mpuzero */
- writel(0x1, &pl310->pl310_addr_filter_start);
-#endif
-
- /* Add device descriptor to FPGA device table */
- socfpga_fpga_add();
-
-#ifdef CONFIG_DESIGNWARE_SPI
- /* Get Designware SPI controller out of reset */
- socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
- socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
-#endif
-
-#ifdef CONFIG_NAND_DENALI
- socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
-#endif
-
- return 0;
-}
-
-static void socfpga_sdram_apply_static_cfg(void)
-{
- const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
- const uint32_t applymask = 0x8;
- uint32_t val = readl(staticcfg) | applymask;
-
- /*
- * SDRAM staticcfg register specific:
- * When applying the register setting, the CPU must not access
- * SDRAM. Luckily for us, we can abuse i-cache here to help us
- * circumvent the SDRAM access issue. The idea is to make sure
- * that the code is in one full i-cache line by branching past
- * it and back. Once it is in the i-cache, we execute the core
- * of the code and apply the register settings.
- *
- * The code below uses 7 instructions, while the Cortex-A9 has
- * 32-byte cachelines, thus the limit is 8 instructions total.
- */
- asm volatile(
- ".align 5 \n"
- " b 2f \n"
- "1: str %0, [%1] \n"
- " dsb \n"
- " isb \n"
- " b 3f \n"
- "2: b 1b \n"
- "3: nop \n"
- : : "r"(val), "r"(staticcfg) : "memory", "cc");
-}
-
-int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- if (argc != 2)
- return CMD_RET_USAGE;
-
- argv++;
-
- switch (*argv[0]) {
- case 'e': /* Enable */
- writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
- socfpga_sdram_apply_static_cfg();
- writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
- writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
- writel(iswgrp_handoff[1], &nic301_regs->remap);
- break;
- case 'd': /* Disable */
- writel(0, &sysmgr_regs->fpgaintfgrp_module);
- writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
- socfpga_sdram_apply_static_cfg();
- writel(0, &reset_manager_base->brg_mod_reset);
- writel(1, &nic301_regs->remap);
- break;
- default:
- return CMD_RET_USAGE;
- }
-
- return 0;
-}
-
-U_BOOT_CMD(
- bridge, 2, 1, do_bridge,
- "SoCFPGA HPS FPGA bridge control",
- "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
- "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
- ""
-);
diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c
new file mode 100644
index 0000000..9d751f6
--- /dev/null
+++ b/arch/arm/mach-socfpga/misc_arria10.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <ns16550.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/sdram_arria10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/io.h>
+#include <asm/pl310.h>
+
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58
+#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78
+#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_SPL_BUILD)
+static struct pl310_regs *const pl310 =
+ (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+ (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+#endif
+
+static struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+void dwmac_deassert_reset(const unsigned int of_reset_id,
+ const u32 phymode)
+{
+ u32 reset;
+
+ if (of_reset_id == EMAC0_RESET) {
+ reset = SOCFPGA_RESET(EMAC0);
+ } else if (of_reset_id == EMAC1_RESET) {
+ reset = SOCFPGA_RESET(EMAC1);
+ } else if (of_reset_id == EMAC2_RESET) {
+ reset = SOCFPGA_RESET(EMAC2);
+ } else {
+ printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
+ return;
+ }
+
+ clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
+ SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+ phymode);
+
+ /* Release the EMAC controller from reset */
+ socfpga_per_reset(reset, 0);
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+static void initialize_security_policies(void)
+{
+ /* Put OCRAM in non-secure */
+ writel(0x003f0000, &noc_fw_ocram_base->region0);
+ writel(0x1, &noc_fw_ocram_base->enable);
+}
+
+int arch_early_init_r(void)
+{
+ initialize_security_policies();
+
+ /* Configure the L2 controller to make SDRAM start at 0 */
+ writel(0x1, &pl310->pl310_addr_filter_start);
+
+ /* assert reset to all except L4WD0 and L4TIMER0 */
+ socfpga_per_reset_all();
+
+ /* configuring the clock based on handoff */
+ /* TODO: Add call to cm_basic_init() */
+
+ /* Add device descriptor to FPGA device table */
+ socfpga_fpga_add();
+ return 0;
+}
+#else
+int arch_early_init_r(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * This function looking the 1st encounter UART peripheral,
+ * and then return its offset of the dedicated/shared IO pin
+ * mux. offset value (zero and above).
+ */
+static int find_peripheral_uart(const void *blob,
+ int child, const char *node_name)
+{
+ int len;
+ fdt_addr_t base_addr = 0;
+ fdt_size_t size;
+ const u32 *cell;
+ u32 value, offset = 0;
+
+ base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
+ if (base_addr != FDT_ADDR_T_NONE) {
+ cell = fdt_getprop(blob, child, "pinctrl-single,pins",
+ &len);
+ if (cell != NULL) {
+ for (; len > 0; len -= (2 * sizeof(u32))) {
+ offset = fdt32_to_cpu(*cell++);
+ value = fdt32_to_cpu(*cell++);
+ /* Found UART peripheral. */
+ if (value == PINMUX_UART)
+ return offset;
+ }
+ }
+ }
+ return -EINVAL;
+}
+
+/*
+ * This function looks up the 1st encounter UART peripheral,
+ * and then return its offset of the dedicated/shared IO pin
+ * mux. UART peripheral is found if the offset is not in negative
+ * value.
+ */
+static int is_peripheral_uart_true(const void *blob,
+ int node, const char *child_name)
+{
+ int child, len;
+ const char *node_name;
+
+ child = fdt_first_subnode(blob, node);
+
+ if (child < 0)
+ return -EINVAL;
+
+ node_name = fdt_get_name(blob, child, &len);
+
+ while (node_name) {
+ if (!strcmp(child_name, node_name))
+ return find_peripheral_uart(blob, child, node_name);
+
+ child = fdt_next_subnode(blob, child);
+ if (child < 0)
+ break;
+
+ node_name = fdt_get_name(blob, child, &len);
+ }
+
+ return -1;
+}
+
+/*
+ * This function looking the 1st encounter UART dedicated IO peripheral,
+ * and then return based address of the 1st encounter UART dedicated
+ * IO peripheral.
+ */
+unsigned int dedicated_uart_com_port(const void *blob)
+{
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+ if (node < 0)
+ return 0;
+
+ if (is_peripheral_uart_true(blob, node, "dedicated") >= 0)
+ return SOCFPGA_UART1_ADDRESS;
+
+ return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART shared IO peripheral, and then
+ * return based address of the 1st encounter UART shared IO peripheral.
+ */
+unsigned int shared_uart_com_port(const void *blob)
+{
+ int node, ret;
+
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+ if (node < 0)
+ return 0;
+
+ ret = is_peripheral_uart_true(blob, node, "shared");
+
+ if (ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 ||
+ ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 ||
+ ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3)
+ return SOCFPGA_UART0_ADDRESS;
+ else if (ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 ||
+ ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 ||
+ ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3)
+ return SOCFPGA_UART1_ADDRESS;
+
+ return 0;
+}
+
+/*
+ * This function looking the 1st encounter UART peripheral, and then return
+ * base address of the 1st encounter UART peripheral.
+ */
+unsigned int uart_com_port(const void *blob)
+{
+ unsigned int ret;
+
+ ret = dedicated_uart_com_port(blob);
+
+ if (ret)
+ return ret;
+
+ return shared_uart_com_port(blob);
+}
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ const u32 bsel =
+ SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
+
+ puts("CPU: Altera SoCFPGA Arria 10\n");
+
+ printf("BOOT: %s\n", bsel_str[bsel].name);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c
new file mode 100644
index 0000000..49b26b3
--- /dev/null
+++ b/arch/arm/mach-socfpga/misc_gen5.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <altera.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <watchdog.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/nic301.h>
+#include <asm/arch/scu.h>
+#include <asm/pl310.h>
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pl310_regs *const pl310 =
+ (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+static struct socfpga_reset_manager *reset_manager_base =
+ (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
+static struct nic301_registers *nic301_regs =
+ (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
+static struct scu_registers *scu_regs =
+ (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
+static struct socfpga_sdr_ctrl *sdr_ctrl =
+ (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+void dwmac_deassert_reset(const unsigned int of_reset_id,
+ const u32 phymode)
+{
+ u32 physhift, reset;
+
+ if (of_reset_id == EMAC0_RESET) {
+ physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
+ reset = SOCFPGA_RESET(EMAC0);
+ } else if (of_reset_id == EMAC1_RESET) {
+ physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
+ reset = SOCFPGA_RESET(EMAC1);
+ } else {
+ printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
+ return;
+ }
+
+ /* configure to PHY interface select choosed */
+ clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
+ SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
+ phymode << physhift);
+
+ /* Release the EMAC controller from reset */
+ socfpga_per_reset(reset, 0);
+}
+
+static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
+{
+ if (!phymode)
+ return -EINVAL;
+
+ if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
+ *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
+ return 0;
+ }
+
+ if (!strcmp(phymode, "rgmii")) {
+ *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
+ return 0;
+ }
+
+ if (!strcmp(phymode, "rmii")) {
+ *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int socfpga_eth_reset(void)
+{
+ const void *fdt = gd->fdt_blob;
+ struct fdtdec_phandle_args args;
+ const char *phy_mode;
+ u32 phy_modereg;
+ int nodes[2]; /* Max. two GMACs */
+ int ret, count;
+ int i, node;
+
+ /* Put both GMACs into RESET state. */
+ socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
+ socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
+
+ count = fdtdec_find_aliases_for_id(fdt, "ethernet",
+ COMPAT_ALTERA_SOCFPGA_DWMAC,
+ nodes, ARRAY_SIZE(nodes));
+ for (i = 0; i < count; i++) {
+ node = nodes[i];
+ if (node <= 0)
+ continue;
+
+ ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
+ "#reset-cells", 1, 0,
+ &args);
+ if (ret || (args.args_count != 1)) {
+ debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
+ continue;
+ }
+
+ phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
+ ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
+ if (ret) {
+ debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
+ continue;
+ }
+
+ dwmac_deassert_reset(args.args[0], phy_modereg);
+ }
+
+ return 0;
+}
+#else
+static int socfpga_eth_reset(void)
+{
+ return 0;
+};
+#endif
+
+static const struct {
+ const u16 pn;
+ const char *name;
+ const char *var;
+} const socfpga_fpga_model[] = {
+ /* Cyclone V E */
+ { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
+ { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
+ { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
+ { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
+ { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
+ /* Cyclone V GX/GT */
+ { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
+ { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
+ { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
+ { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
+ { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
+ /* Cyclone V SE/SX/ST */
+ { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
+ { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
+ { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
+ { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
+ /* Arria V */
+ { 0x2d03, "Arria V, D5", "av_d5" },
+};
+
+static int socfpga_fpga_id(const bool print_id)
+{
+ const u32 altera_mi = 0x6e;
+ const u32 id = scan_mgr_get_fpga_id();
+
+ const u32 lsb = id & 0x00000001;
+ const u32 mi = (id >> 1) & 0x000007ff;
+ const u32 pn = (id >> 12) & 0x0000ffff;
+ const u32 version = (id >> 28) & 0x0000000f;
+ int i;
+
+ if ((mi != altera_mi) || (lsb != 1)) {
+ printf("FPGA: Not Altera chip ID\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
+ if (pn == socfpga_fpga_model[i].pn)
+ break;
+
+ if (i == ARRAY_SIZE(socfpga_fpga_model)) {
+ printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id);
+ return -EINVAL;
+ }
+
+ if (print_id)
+ printf("FPGA: Altera %s, version 0x%01x\n",
+ socfpga_fpga_model[i].name, version);
+ return i;
+}
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ const u32 bsel =
+ SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
+
+ puts("CPU: Altera SoCFPGA Platform\n");
+ socfpga_fpga_id(1);
+
+ printf("BOOT: %s\n", bsel_str[bsel].name);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+ const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
+ const int fpga_id = socfpga_fpga_id(0);
+ setenv("bootmode", bsel_str[bsel].mode);
+ if (fpga_id >= 0)
+ setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
+ return socfpga_eth_reset();
+}
+#endif
+
+/*
+ * Convert all NIC-301 AMBA slaves from secure to non-secure
+ */
+static void socfpga_nic301_slave_ns(void)
+{
+ writel(0x1, &nic301_regs->lwhps2fpgaregs);
+ writel(0x1, &nic301_regs->hps2fpgaregs);
+ writel(0x1, &nic301_regs->acp);
+ writel(0x1, &nic301_regs->rom);
+ writel(0x1, &nic301_regs->ocram);
+ writel(0x1, &nic301_regs->sdrdata);
+}
+
+static u32 iswgrp_handoff[8];
+
+int arch_early_init_r(void)
+{
+ int i;
+
+ /*
+ * Write magic value into magic register to unlock support for
+ * issuing warm reset. The ancient kernel code expects this
+ * value to be written into the register by the bootloader, so
+ * to support that old code, we write it here instead of in the
+ * reset_cpu() function just before resetting the CPU.
+ */
+ writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
+
+ for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
+ iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
+
+ socfpga_bridges_reset(1);
+
+ socfpga_nic301_slave_ns();
+
+ /*
+ * Private components security:
+ * U-Boot : configure private timer, global timer and cpu component
+ * access as non secure for kernel stage (as required by Linux)
+ */
+ setbits_le32(&scu_regs->sacr, 0xfff);
+
+ /* Configure the L2 controller to make SDRAM start at 0 */
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+ writel(0x2, &nic301_regs->remap);
+#else
+ writel(0x1, &nic301_regs->remap); /* remap.mpuzero */
+ writel(0x1, &pl310->pl310_addr_filter_start);
+#endif
+
+ /* Add device descriptor to FPGA device table */
+ socfpga_fpga_add();
+
+#ifdef CONFIG_DESIGNWARE_SPI
+ /* Get Designware SPI controller out of reset */
+ socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
+ socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
+#endif
+
+#ifdef CONFIG_NAND_DENALI
+ socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
+#endif
+
+ return 0;
+}
+
+static void socfpga_sdram_apply_static_cfg(void)
+{
+ const u32 applymask = 0x8;
+ u32 val = readl(&sdr_ctrl->static_cfg) | applymask;
+
+ /*
+ * SDRAM staticcfg register specific:
+ * When applying the register setting, the CPU must not access
+ * SDRAM. Luckily for us, we can abuse i-cache here to help us
+ * circumvent the SDRAM access issue. The idea is to make sure
+ * that the code is in one full i-cache line by branching past
+ * it and back. Once it is in the i-cache, we execute the core
+ * of the code and apply the register settings.
+ *
+ * The code below uses 7 instructions, while the Cortex-A9 has
+ * 32-byte cachelines, thus the limit is 8 instructions total.
+ */
+ asm volatile(
+ ".align 5 \n"
+ " b 2f \n"
+ "1: str %0, [%1] \n"
+ " dsb \n"
+ " isb \n"
+ " b 3f \n"
+ "2: b 1b \n"
+ "3: nop \n"
+ : : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc");
+}
+
+int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+
+ argv++;
+
+ switch (*argv[0]) {
+ case 'e': /* Enable */
+ writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
+ socfpga_sdram_apply_static_cfg();
+ writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
+ writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
+ writel(iswgrp_handoff[1], &nic301_regs->remap);
+ break;
+ case 'd': /* Disable */
+ writel(0, &sysmgr_regs->fpgaintfgrp_module);
+ writel(0, &sdr_ctrl->fpgaport_rst);
+ socfpga_sdram_apply_static_cfg();
+ writel(0, &reset_manager_base->brg_mod_reset);
+ writel(1, &nic301_regs->remap);
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bridge, 2, 1, do_bridge,
+ "SoCFPGA HPS FPGA bridge control",
+ "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+ "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+ ""
+);
diff --git a/arch/arm/mach-socfpga/pinmux_arria10.c b/arch/arm/mach-socfpga/pinmux_arria10.c
new file mode 100644
index 0000000..69d6a92
--- /dev/null
+++ b/arch/arm/mach-socfpga/pinmux_arria10.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <asm/arch/pinmux.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fdtdec.h>
+
+static int do_pinctr_pin(const void *blob, int child, const char *node_name)
+{
+ int len;
+ fdt_addr_t base_addr;
+ fdt_size_t size;
+ const u32 *cell;
+ u32 offset, value;
+
+ base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
+ if (base_addr != FDT_ADDR_T_NONE) {
+ cell = fdt_getprop(blob, child, "pinctrl-single,pins", &len);
+ if (!cell || len <= 0)
+ return -EFAULT;
+
+ debug("%p %d\n", cell, len);
+ for (; len > 0; len -= (2 * sizeof(u32))) {
+ offset = fdt32_to_cpu(*cell++);
+ value = fdt32_to_cpu(*cell++);
+ debug("<0x%x 0x%x>\n", offset, value);
+ writel(value, base_addr + offset);
+ }
+ return 0;
+ }
+ return -EFAULT;
+}
+
+static int do_pinctrl_pins(const void *blob, int node, const char *child_name)
+{
+ int child, len;
+ const char *node_name;
+
+ child = fdt_first_subnode(blob, node);
+
+ if (child < 0)
+ return -EINVAL;
+
+ node_name = fdt_get_name(blob, child, &len);
+
+ while (node_name) {
+ if (!strcmp(child_name, node_name))
+ return do_pinctr_pin(blob, child, node_name);
+
+ child = fdt_next_subnode(blob, child);
+
+ if (child < 0)
+ break;
+
+ node_name = fdt_get_name(blob, child, &len);
+ }
+
+ return -EFAULT;
+}
+
+int config_dedicated_pins(const void *blob)
+{
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+ if (node < 0)
+ return -EINVAL;
+
+ if (do_pinctrl_pins(blob, node, "dedicated_cfg"))
+ return -EFAULT;
+
+ if (do_pinctrl_pins(blob, node, "dedicated"))
+ return -EFAULT;
+
+ return 0;
+}
+
+int config_pins(const void *blob, const char *pin_grp)
+{
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE);
+ if (node < 0)
+ return -EINVAL;
+
+ if (do_pinctrl_pins(blob, node, pin_grp))
+ return -EFAULT;
+
+ return 0;
+}
diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager.c
index b6beaa2..29438ed5 100644
--- a/arch/arm/mach-socfpga/reset_manager.c
+++ b/arch/arm/mach-socfpga/reset_manager.c
@@ -7,53 +7,12 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/fpga_manager.h>
#include <asm/arch/reset_manager.h>
-#include <asm/arch/system_manager.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct socfpga_reset_manager *reset_manager_base =
(void *)SOCFPGA_RSTMGR_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
- (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
-
-/* Assert or de-assert SoCFPGA reset manager reset. */
-void socfpga_per_reset(u32 reset, int set)
-{
- const void *reg;
-
- if (RSTMGR_BANK(reset) == 0)
- reg = &reset_manager_base->mpu_mod_reset;
- else if (RSTMGR_BANK(reset) == 1)
- reg = &reset_manager_base->per_mod_reset;
- else if (RSTMGR_BANK(reset) == 2)
- reg = &reset_manager_base->per2_mod_reset;
- else if (RSTMGR_BANK(reset) == 3)
- reg = &reset_manager_base->brg_mod_reset;
- else if (RSTMGR_BANK(reset) == 4)
- reg = &reset_manager_base->misc_mod_reset;
- else /* Invalid reset register, do nothing */
- return;
-
- if (set)
- setbits_le32(reg, 1 << RSTMGR_RESET(reset));
- else
- clrbits_le32(reg, 1 << RSTMGR_RESET(reset));
-}
-
-/*
- * Assert reset on every peripheral but L4WD0.
- * Watchdog must be kept intact to prevent glitches
- * and/or hangs.
- */
-void socfpga_per_reset_all(void)
-{
- const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
-
- writel(~l4wd0, &reset_manager_base->per_mod_reset);
- writel(0xffffffff, &reset_manager_base->per2_mod_reset);
-}
/*
* Write the reset manager register to cause reset
@@ -61,8 +20,8 @@
void reset_cpu(ulong addr)
{
/* request a warm reset */
- writel((1 << RSTMGR_CTRL_SWWARMRSTREQ_LSB),
- &reset_manager_base->ctrl);
+ writel(1 << RSTMGR_CTRL_SWWARMRSTREQ_LSB,
+ &reset_manager_base->ctrl);
/*
* infinite loop here as watchdog will trigger and reset
* the processor
@@ -70,51 +29,3 @@
while (1)
;
}
-
-/*
- * Release peripherals from reset based on handoff
- */
-void reset_deassert_peripherals_handoff(void)
-{
- writel(0, &reset_manager_base->per_mod_reset);
-}
-
-#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-void socfpga_bridges_reset(int enable)
-{
- /* For SoCFPGA-VT, this is NOP. */
-}
-#else
-
-#define L3REGS_REMAP_LWHPS2FPGA_MASK 0x10
-#define L3REGS_REMAP_HPS2FPGA_MASK 0x08
-#define L3REGS_REMAP_OCRAM_MASK 0x01
-
-void socfpga_bridges_reset(int enable)
-{
- const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
- L3REGS_REMAP_HPS2FPGA_MASK |
- L3REGS_REMAP_OCRAM_MASK;
-
- if (enable) {
- /* brdmodrst */
- writel(0xffffffff, &reset_manager_base->brg_mod_reset);
- } else {
- writel(0, &sysmgr_regs->iswgrp_handoff[0]);
- writel(l3mask, &sysmgr_regs->iswgrp_handoff[1]);
-
- /* Check signal from FPGA. */
- if (!fpgamgr_test_fpga_ready()) {
- /* FPGA not ready, do nothing. */
- printf("%s: FPGA not ready, aborting.\n", __func__);
- return;
- }
-
- /* brdmodrst */
- writel(0, &reset_manager_base->brg_mod_reset);
-
- /* Remap the bridges into memory map */
- writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
- }
-}
-#endif
diff --git a/arch/arm/mach-socfpga/reset_manager_arria10.c b/arch/arm/mach-socfpga/reset_manager_arria10.c
new file mode 100644
index 0000000..d8c858c
--- /dev/null
+++ b/arch/arm/mach-socfpga/reset_manager_arria10.c
@@ -0,0 +1,383 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_reset_manager *reset_manager_base =
+ (void *)SOCFPGA_RSTMGR_ADDRESS;
+static const struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+#define ECC_MASK (ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK | \
+ ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK | \
+ ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK | \
+ ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK | \
+ ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK | \
+ ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK)
+
+void socfpga_reset_uart(int assert)
+{
+ unsigned int com_port;
+
+ com_port = uart_com_port(gd->fdt_blob);
+
+ if (com_port == SOCFPGA_UART1_ADDRESS)
+ socfpga_per_reset(SOCFPGA_RESET(UART1), assert);
+ else if (com_port == SOCFPGA_UART0_ADDRESS)
+ socfpga_per_reset(SOCFPGA_RESET(UART0), assert);
+}
+
+static const u32 per0fpgamasks[] = {
+ ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK,
+ 0, /* i2c0 per1mod */
+ 0, /* i2c1 per1mod */
+ 0, /* i2c0_emac */
+ 0, /* i2c1_emac */
+ 0, /* i2c2_emac */
+ ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_NAND_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK,
+ ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK,
+ 0, /* uart0 per1mod */
+ 0, /* uart1 per1mod */
+};
+
+static const u32 per1fpgamasks[] = {
+ 0, /* emac0 per0mod */
+ 0, /* emac1 per0mod */
+ 0, /* emac2 per0mod */
+ ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK,
+ ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK,
+ ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK, /* i2c0_emac */
+ ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK, /* i2c1_emac */
+ ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK, /* i2c2_emac */
+ 0, /* nand per0mod */
+ 0, /* qspi per0mod */
+ 0, /* sdmmc per0mod */
+ 0, /* spim0 per0mod */
+ 0, /* spim1 per0mod */
+ 0, /* spis0 per0mod */
+ 0, /* spis1 per0mod */
+ ALT_RSTMGR_PER1MODRST_UART0_SET_MSK,
+ ALT_RSTMGR_PER1MODRST_UART1_SET_MSK,
+};
+
+struct bridge_cfg {
+ int compat_id;
+ u32 mask_noc;
+ u32 mask_rstmgr;
+};
+
+static const struct bridge_cfg bridge_cfg_tbl[] = {
+ {
+ COMPAT_ALTERA_SOCFPGA_H2F_BRG,
+ ALT_SYSMGR_NOC_H2F_SET_MSK,
+ ALT_RSTMGR_BRGMODRST_H2F_SET_MSK,
+ },
+ {
+ COMPAT_ALTERA_SOCFPGA_LWH2F_BRG,
+ ALT_SYSMGR_NOC_LWH2F_SET_MSK,
+ ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK,
+ },
+ {
+ COMPAT_ALTERA_SOCFPGA_F2H_BRG,
+ ALT_SYSMGR_NOC_F2H_SET_MSK,
+ ALT_RSTMGR_BRGMODRST_F2H_SET_MSK,
+ },
+ {
+ COMPAT_ALTERA_SOCFPGA_F2SDR0,
+ ALT_SYSMGR_NOC_F2SDR0_SET_MSK,
+ ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK,
+ },
+ {
+ COMPAT_ALTERA_SOCFPGA_F2SDR1,
+ ALT_SYSMGR_NOC_F2SDR1_SET_MSK,
+ ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK,
+ },
+ {
+ COMPAT_ALTERA_SOCFPGA_F2SDR2,
+ ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+ ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK,
+ },
+};
+
+/* Disable the watchdog (toggle reset to watchdog) */
+void socfpga_watchdog_disable(void)
+{
+ /* assert reset for watchdog */
+ setbits_le32(&reset_manager_base->per1modrst,
+ ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
+}
+
+/* Release NOC ddr scheduler from reset */
+void socfpga_reset_deassert_noc_ddr_scheduler(void)
+{
+ clrbits_le32(&reset_manager_base->brgmodrst,
+ ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK);
+}
+
+/* Check whether Watchdog in reset state? */
+int socfpga_is_wdt_in_reset(void)
+{
+ u32 val;
+
+ val = readl(&reset_manager_base->per1modrst);
+ val &= ALT_RSTMGR_PER1MODRST_WD0_SET_MSK;
+
+ /* return 0x1 if watchdog in reset */
+ return val;
+}
+
+/* emacbase: base address of emac to enable/disable reset
+ * state: 0 - disable reset, !0 - enable reset
+ */
+void socfpga_emac_manage_reset(ulong emacbase, u32 state)
+{
+ ulong eccmask;
+ ulong emacmask;
+
+ switch (emacbase) {
+ case SOCFPGA_EMAC0_ADDRESS:
+ eccmask = ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK;
+ emacmask = ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK;
+ break;
+ case SOCFPGA_EMAC1_ADDRESS:
+ eccmask = ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK;
+ emacmask = ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK;
+ break;
+ case SOCFPGA_EMAC2_ADDRESS:
+ eccmask = ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK;
+ emacmask = ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK;
+ break;
+ default:
+ error("emac base address unexpected! %lx", emacbase);
+ hang();
+ break;
+ }
+
+ if (state) {
+ /* Enable ECC OCP first */
+ setbits_le32(&reset_manager_base->per0modrst, eccmask);
+ setbits_le32(&reset_manager_base->per0modrst, emacmask);
+ } else {
+ /* Disable ECC OCP first */
+ clrbits_le32(&reset_manager_base->per0modrst, emacmask);
+ clrbits_le32(&reset_manager_base->per0modrst, eccmask);
+ }
+}
+
+static int get_bridge_init_val(const void *blob, int compat_id)
+{
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0, compat_id);
+ if (node < 0)
+ return 0;
+
+ return fdtdec_get_uint(blob, node, "init-val", 0);
+}
+
+/* Enable bridges (hps2fpga, lwhps2fpga, fpga2hps, fpga2sdram) per handoff */
+int socfpga_reset_deassert_bridges_handoff(void)
+{
+ u32 mask_noc = 0, mask_rstmgr = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bridge_cfg_tbl); i++) {
+ if (get_bridge_init_val(gd->fdt_blob,
+ bridge_cfg_tbl[i].compat_id)) {
+ mask_noc |= bridge_cfg_tbl[i].mask_noc;
+ mask_rstmgr |= bridge_cfg_tbl[i].mask_rstmgr;
+ }
+ }
+
+ /* clear idle request to all bridges */
+ setbits_le32(&sysmgr_regs->noc_idlereq_clr, mask_noc);
+
+ /* Release bridges from reset state per handoff value */
+ clrbits_le32(&reset_manager_base->brgmodrst, mask_rstmgr);
+
+ /* Poll until all idleack to 0, timeout at 1000ms */
+ return wait_for_bit(__func__, &sysmgr_regs->noc_idleack, mask_noc,
+ false, 1000, false);
+}
+
+void socfpga_reset_assert_fpga_connected_peripherals(void)
+{
+ u32 mask0 = 0;
+ u32 mask1 = 0;
+ u32 fpga_pinux_addr = SOCFPGA_PINMUX_FPGA_INTERFACE_ADDRESS;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(per1fpgamasks); i++) {
+ if (readl(fpga_pinux_addr)) {
+ mask0 |= per0fpgamasks[i];
+ mask1 |= per1fpgamasks[i];
+ }
+ fpga_pinux_addr += sizeof(u32);
+ }
+
+ setbits_le32(&reset_manager_base->per0modrst, mask0 & ECC_MASK);
+ setbits_le32(&reset_manager_base->per1modrst, mask1);
+ setbits_le32(&reset_manager_base->per0modrst, mask0);
+}
+
+/* Release L4 OSC1 Watchdog Timer 0 from reset through reset manager */
+void socfpga_reset_deassert_osc1wd0(void)
+{
+ clrbits_le32(&reset_manager_base->per1modrst,
+ ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
+}
+
+/*
+ * Assert or de-assert SoCFPGA reset manager reset.
+ */
+void socfpga_per_reset(u32 reset, int set)
+{
+ const u32 *reg;
+ u32 rstmgr_bank = RSTMGR_BANK(reset);
+
+ switch (rstmgr_bank) {
+ case 0:
+ reg = &reset_manager_base->mpumodrst;
+ break;
+ case 1:
+ reg = &reset_manager_base->per0modrst;
+ break;
+ case 2:
+ reg = &reset_manager_base->per1modrst;
+ break;
+ case 3:
+ reg = &reset_manager_base->brgmodrst;
+ break;
+ case 4:
+ reg = &reset_manager_base->sysmodrst;
+ break;
+
+ default:
+ return;
+ }
+
+ if (set)
+ setbits_le32(reg, 1 << RSTMGR_RESET(reset));
+ else
+ clrbits_le32(reg, 1 << RSTMGR_RESET(reset));
+}
+
+/*
+ * Assert reset on every peripheral but L4WD0.
+ * Watchdog must be kept intact to prevent glitches
+ * and/or hangs.
+ * For the Arria10, we disable all the peripherals except L4 watchdog0,
+ * L4 Timer 0, and ECC.
+ */
+void socfpga_per_reset_all(void)
+{
+ const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
+ (1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
+ unsigned mask_ecc_ocp =
+ ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
+ ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK;
+
+ /* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
+ writel(~l4wd0, &reset_manager_base->per1modrst);
+ setbits_le32(&reset_manager_base->per0modrst, ~mask_ecc_ocp);
+
+ /* Finally disable the ECC_OCP */
+ setbits_le32(&reset_manager_base->per0modrst, mask_ecc_ocp);
+}
+
+#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
+int socfpga_bridges_reset(int enable)
+{
+ /* For SoCFPGA-VT, this is NOP. */
+ return 0;
+}
+#else
+int socfpga_bridges_reset(int enable)
+{
+ int ret;
+
+ /* Disable all the bridges (hps2fpga, lwhps2fpga, fpga2hps,
+ fpga2sdram) */
+ /* set idle request to all bridges */
+ writel(ALT_SYSMGR_NOC_H2F_SET_MSK |
+ ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+ ALT_SYSMGR_NOC_F2H_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+ &sysmgr_regs->noc_idlereq_set);
+
+ /* Enable the NOC timeout */
+ writel(ALT_SYSMGR_NOC_TMO_EN_SET_MSK, &sysmgr_regs->noc_timeout);
+
+ /* Poll until all idleack to 1 */
+ ret = wait_for_bit(__func__, &sysmgr_regs->noc_idleack,
+ ALT_SYSMGR_NOC_H2F_SET_MSK |
+ ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+ ALT_SYSMGR_NOC_F2H_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+ true, 10000, false);
+ if (ret)
+ return ret;
+
+ /* Poll until all idlestatus to 1 */
+ ret = wait_for_bit(__func__, &sysmgr_regs->noc_idlestatus,
+ ALT_SYSMGR_NOC_H2F_SET_MSK |
+ ALT_SYSMGR_NOC_LWH2F_SET_MSK |
+ ALT_SYSMGR_NOC_F2H_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
+ ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
+ true, 10000, false);
+ if (ret)
+ return ret;
+
+ /* Put all bridges (except NOR DDR scheduler) into reset state */
+ setbits_le32(&reset_manager_base->brgmodrst,
+ (ALT_RSTMGR_BRGMODRST_H2F_SET_MSK |
+ ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK |
+ ALT_RSTMGR_BRGMODRST_F2H_SET_MSK |
+ ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK |
+ ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK |
+ ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK));
+
+ /* Disable NOC timeout */
+ writel(0, &sysmgr_regs->noc_timeout);
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-socfpga/reset_manager_gen5.c b/arch/arm/mach-socfpga/reset_manager_gen5.c
new file mode 100644
index 0000000..aa88adb
--- /dev/null
+++ b/arch/arm/mach-socfpga/reset_manager_gen5.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_reset_manager *reset_manager_base =
+ (void *)SOCFPGA_RSTMGR_ADDRESS;
+static const struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+/* Assert or de-assert SoCFPGA reset manager reset. */
+void socfpga_per_reset(u32 reset, int set)
+{
+ const u32 *reg;
+ u32 rstmgr_bank = RSTMGR_BANK(reset);
+
+ switch (rstmgr_bank) {
+ case 0:
+ reg = &reset_manager_base->mpu_mod_reset;
+ break;
+ case 1:
+ reg = &reset_manager_base->per_mod_reset;
+ break;
+ case 2:
+ reg = &reset_manager_base->per2_mod_reset;
+ break;
+ case 3:
+ reg = &reset_manager_base->brg_mod_reset;
+ break;
+ case 4:
+ reg = &reset_manager_base->misc_mod_reset;
+ break;
+
+ default:
+ return;
+ }
+
+ if (set)
+ setbits_le32(reg, 1 << RSTMGR_RESET(reset));
+ else
+ clrbits_le32(reg, 1 << RSTMGR_RESET(reset));
+}
+
+/*
+ * Assert reset on every peripheral but L4WD0.
+ * Watchdog must be kept intact to prevent glitches
+ * and/or hangs.
+ */
+void socfpga_per_reset_all(void)
+{
+ const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0));
+
+ writel(~l4wd0, &reset_manager_base->per_mod_reset);
+ writel(0xffffffff, &reset_manager_base->per2_mod_reset);
+}
+
+/*
+ * Release peripherals from reset based on handoff
+ */
+void reset_deassert_peripherals_handoff(void)
+{
+ writel(0, &reset_manager_base->per_mod_reset);
+}
+
+#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
+void socfpga_bridges_reset(int enable)
+{
+ /* For SoCFPGA-VT, this is NOP. */
+ return;
+}
+#else
+
+#define L3REGS_REMAP_LWHPS2FPGA_MASK 0x10
+#define L3REGS_REMAP_HPS2FPGA_MASK 0x08
+#define L3REGS_REMAP_OCRAM_MASK 0x01
+
+void socfpga_bridges_reset(int enable)
+{
+ const u32 l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
+ L3REGS_REMAP_HPS2FPGA_MASK |
+ L3REGS_REMAP_OCRAM_MASK;
+
+ if (enable) {
+ /* brdmodrst */
+ writel(0xffffffff, &reset_manager_base->brg_mod_reset);
+ } else {
+ writel(0, &sysmgr_regs->iswgrp_handoff[0]);
+ writel(l3mask, &sysmgr_regs->iswgrp_handoff[1]);
+
+ /* Check signal from FPGA. */
+ if (!fpgamgr_test_fpga_ready()) {
+ /* FPGA not ready, do nothing. We allow system to boot
+ * without FPGA ready. So, return 0 instead of error. */
+ printf("%s: FPGA not ready, aborting.\n", __func__);
+ return;
+ }
+
+ /* brdmodrst */
+ writel(0, &reset_manager_base->brg_mod_reset);
+
+ /* Remap the bridges into memory map */
+ writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
+ }
+ return;
+}
+#endif
diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index fec4c7a..71bae82 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -19,23 +19,32 @@
#include <asm/arch/sdram.h>
#include <asm/arch/scu.h>
#include <asm/arch/nic301.h>
+#include <asm/sections.h>
+#include <fdtdec.h>
+#include <watchdog.h>
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#include <asm/arch/pinmux.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
static struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
static struct scu_registers *scu_regs =
(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
static struct nic301_registers *nic301_regs =
(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
-static struct socfpga_system_manager *sysmgr_regs =
+#endif
+
+static const struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
u32 spl_boot_device(void)
{
const u32 bsel = readl(&sysmgr_regs->bootinfo);
- switch (bsel & 0x7) {
+ switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
case 0x1: /* FPGA (HPS2FPGA Bridge) */
return BOOT_DEVICE_RAM;
case 0x2: /* NAND Flash (1.8V) */
@@ -68,6 +77,7 @@
}
#endif
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
static void socfpga_nic301_slave_ns(void)
{
writel(0x1, &nic301_regs->lwhps2fpgaregs);
@@ -127,7 +137,8 @@
debug("Reconfigure Clock Manager\n");
/* reconfigure the PLLs */
- cm_basic_init(cm_default_cfg);
+ if (cm_basic_init(cm_default_cfg))
+ hang();
/* Enable bootrom to configure IOs. */
sysmgr_config_warmrstcfgio(1);
@@ -182,3 +193,42 @@
/* Configure simple malloc base pointer into RAM. */
gd->malloc_base = CONFIG_SYS_TEXT_BASE + (1024 * 1024);
}
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+void spl_board_init(void)
+{
+ /* configuring the clock based on handoff */
+ cm_basic_init(gd->fdt_blob);
+ WATCHDOG_RESET();
+
+ config_dedicated_pins(gd->fdt_blob);
+ WATCHDOG_RESET();
+
+ /* Release UART from reset */
+ socfpga_reset_uart(0);
+
+ /* enable console uart printing */
+ preloader_console_init();
+}
+
+void board_init_f(ulong dummy)
+{
+ /*
+ * Configure Clock Manager to use intosc clock instead external osc to
+ * ensure success watchdog operation. We do it as early as possible.
+ */
+ cm_use_intosc();
+
+ socfpga_watchdog_disable();
+
+ arch_early_init_r();
+
+#ifdef CONFIG_HW_WATCHDOG
+ /* release osc1 watchdog timer 0 from reset */
+ socfpga_reset_deassert_osc1wd0();
+
+ /* reconfigure and enable the watchdog */
+ hw_watchdog_init();
+ WATCHDOG_RESET();
+#endif /* CONFIG_HW_WATCHDOG */
+}
+#endif
diff --git a/arch/arm/mach-socfpga/system_manager.c b/arch/arm/mach-socfpga/system_manager_gen5.c
similarity index 93%
rename from arch/arm/mach-socfpga/system_manager.c
rename to arch/arm/mach-socfpga/system_manager_gen5.c
index 75a65f3..3588a57 100644
--- a/arch/arm/mach-socfpga/system_manager.c
+++ b/arch/arm/mach-socfpga/system_manager_gen5.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -21,7 +21,7 @@
*/
static void populate_sysmgr_fpgaintf_module(void)
{
- uint32_t handoff_val = 0;
+ u32 handoff_val = 0;
/* ISWGRP_HANDOFF_FPGAINTF */
writel(0, &sysmgr_regs->iswgrp_handoff[2]);
@@ -56,7 +56,7 @@
*/
void sysmgr_pinmux_init(void)
{
- uint32_t regs = (uint32_t)&sysmgr_regs->emacio[0];
+ u32 regs = (u32)&sysmgr_regs->emacio[0];
const u8 *sys_mgr_init_table;
unsigned int len;
int i;
diff --git a/board/altera/arria10-socdk/Kconfig b/board/altera/arria10-socdk/Kconfig
new file mode 100644
index 0000000..b80cc6d
--- /dev/null
+++ b/board/altera/arria10-socdk/Kconfig
@@ -0,0 +1,18 @@
+if TARGET_SOCFPGA_ARRIA10
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_BOARD
+ default "socfpga_arria10"
+
+config SYS_VENDOR
+ default "altera"
+
+config SYS_SOC
+ default "socfpga_arria10"
+
+config SYS_CONFIG_NAME
+ default "socfpga_arria10"
+
+endif
diff --git a/board/altera/arria10-socdk/Makefile b/board/altera/arria10-socdk/Makefile
new file mode 100644
index 0000000..1d885ce
--- /dev/null
+++ b/board/altera/arria10-socdk/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015 Altera Corporation <www.altera.com>
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := socfpga.o
diff --git a/board/altera/arria10-socdk/socfpga.c b/board/altera/arria10-socdk/socfpga.c
new file mode 100644
index 0000000..8516633
--- /dev/null
+++ b/board/altera/arria10-socdk/socfpga.c
@@ -0,0 +1,7 @@
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
new file mode 100644
index 0000000..46bda47
--- /dev/null
+++ b/configs/socfpga_arria10_defconfig
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_arria10"
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
+CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
+CONFIG_SPL=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GREPENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_DOS_PARTITION=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_GPIO=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_SYS_NS16550=y
+CONFIG_USE_TINY_PRINTF=y
diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h
new file mode 100644
index 0000000..7ea780b
--- /dev/null
+++ b/include/configs/socfpga_arria10_socdk.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2015-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __CONFIG_SOCFGPA_ARRIA10_H__
+#define __CONFIG_SOCFGPA_ARRIA10_H__
+
+#include <asm/arch/base_addr_a10.h>
+/* U-Boot Commands */
+#define CONFIG_FAT_WRITE
+#define CONFIG_HW_WATCHDOG
+
+/* Booting Linux */
+#define CONFIG_LOADADDR 0x01000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+/*
+ * U-Boot general configurations
+ */
+/* Cache options */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Memory configurations */
+#define PHYS_SDRAM_1_SIZE 0x40000000
+
+/* Ethernet on SoC (EMAC) */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
+#endif
+
+/*
+ * U-Boot environment configurations
+ */
+#define CONFIG_ENV_IS_IN_MMC
+
+/*
+ * arguments passed to the bootz command. The value of
+ * CONFIG_BOOTARGS goes into the environment value "bootargs".
+ * Do note the value will overide also the chosen node in FDT blob.
+ */
+#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
+
+/*
+ * Serial / UART configurations
+ */
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+
+/*
+ * L4 OSC1 Timer 0
+ */
+/* reload value when timer count to zero */
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+
+/*
+ * Flash configurations
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
+
+#endif /* __CONFIG_SOCFGPA_ARRIA10_H__ */
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 107c6d5..da7e4ad 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -32,9 +32,13 @@
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
-
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x40000 /* 256KB */
+#endif
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
@@ -101,13 +105,14 @@
/*
* FPGA Driver
*/
+#ifdef CONFIG_TARGET_SOCFPGA_GEN5
#ifdef CONFIG_CMD_FPGA
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_SOCFPGA
#define CONFIG_FPGA_COUNT 1
#endif
-
+#endif
/*
* L4 OSC1 Timer 0
*/
@@ -207,11 +212,14 @@
*/
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_NS16550_CLK 1000000
-#else
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
#define CONFIG_SYS_NS16550_CLK 100000000
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART1_ADDRESS
+#define CONFIG_SYS_NS16550_CLK 50000000
#endif
#define CONFIG_CONS_INDEX 1
@@ -298,7 +306,10 @@
*/
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SPL_MAX_SIZE (64 * 1024)
+#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CONFIG_SPL_BOARD_INIT
+#endif
/* SPL SDMMC boot support */
#ifdef CONFIG_SPL_MMC_SUPPORT
diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h b/include/dt-bindings/reset/altr,rst-mgr-a10.h
new file mode 100644
index 0000000..acb0bbf
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+
+/* MPUMODRST */
+#define CPU0_RESET 0
+#define CPU1_RESET 1
+#define WDS_RESET 2
+#define SCUPER_RESET 3
+
+/* PER0MODRST */
+#define EMAC0_RESET 32
+#define EMAC1_RESET 33
+#define EMAC2_RESET 34
+#define USB0_RESET 35
+#define USB1_RESET 36
+#define NAND_RESET 37
+#define QSPI_RESET 38
+#define SDMMC_RESET 39
+#define EMAC0_OCP_RESET 40
+#define EMAC1_OCP_RESET 41
+#define EMAC2_OCP_RESET 42
+#define USB0_OCP_RESET 43
+#define USB1_OCP_RESET 44
+#define NAND_OCP_RESET 45
+#define QSPI_OCP_RESET 46
+#define SDMMC_OCP_RESET 47
+#define DMA_RESET 48
+#define SPIM0_RESET 49
+#define SPIM1_RESET 50
+#define SPIS0_RESET 51
+#define SPIS1_RESET 52
+#define DMA_OCP_RESET 53
+#define EMAC_PTP_RESET 54
+/* 55 is empty*/
+#define DMAIF0_RESET 56
+#define DMAIF1_RESET 57
+#define DMAIF2_RESET 58
+#define DMAIF3_RESET 59
+#define DMAIF4_RESET 60
+#define DMAIF5_RESET 61
+#define DMAIF6_RESET 62
+#define DMAIF7_RESET 63
+
+/* PER1MODRST */
+#define L4WD0_RESET 64
+#define L4WD1_RESET 65
+#define L4SYSTIMER0_RESET 66
+#define L4SYSTIMER1_RESET 67
+#define SPTIMER0_RESET 68
+#define SPTIMER1_RESET 69
+/* 70-71 is reserved */
+#define I2C0_RESET 72
+#define I2C1_RESET 73
+#define I2C2_RESET 74
+#define I2C3_RESET 75
+#define I2C4_RESET 76
+/* 77-79 is reserved */
+#define UART0_RESET 80
+#define UART1_RESET 81
+/* 82-87 is reserved */
+#define GPIO0_RESET 88
+#define GPIO1_RESET 89
+#define GPIO2_RESET 90
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET 96
+#define LWHPS2FPGA_RESET 97
+#define FPGA2HPS_RESET 98
+#define F2SSDRAM0_RESET 99
+#define F2SSDRAM1_RESET 100
+#define F2SSDRAM2_RESET 101
+#define DDRSCH_RESET 102
+
+/* SYSMODRST*/
+#define ROM_RESET 128
+#define OCRAM_RESET 129
+/* 130 is reserved */
+#define FPGAMGR_RESET 131
+#define S2F_RESET 132
+#define SYSDBG_RESET 133
+#define OCRAM_OCP_RESET 134
+
+/* COLDMODRST */
+#define CLKMGRCOLD_RESET 160
+/* 161-162 is reserved */
+#define S2FCOLD_RESET 163
+#define TIMESTAMPCOLD_RESET 164
+#define TAPCOLD_RESET 165
+#define HMCCOLD_RESET 166
+#define IOMGRCOLD_RESET 167
+
+/* NRSTMODRST */
+#define NRSTPINOE_RESET 192
+
+/* DBGMODRST */
+#define DBG_RESET 224
+#endif