video: add nexell video driver (display/video driver)
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used
anymore because framebuffer is allocated by video_reserve() in
video-uclass.c. Therefore code changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).
Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
diff --git a/drivers/video/nexell/s5pxx18_dp_mipi.c b/drivers/video/nexell/s5pxx18_dp_mipi.c
new file mode 100644
index 0000000..670272b
--- /dev/null
+++ b/drivers/video/nexell/s5pxx18_dp_mipi.c
@@ -0,0 +1,677 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jhkim@nexell.co.kr>
+ */
+
+#include <config.h>
+#include <common.h>
+#include <errno.h>
+
+#include <asm/arch/nexell.h>
+#include <asm/arch/tieoff.h>
+#include <asm/arch/reset.h>
+#include <asm/arch/display.h>
+
+#include "soc/s5pxx18_soc_mipi.h"
+#include "soc/s5pxx18_soc_disptop.h"
+#include "soc/s5pxx18_soc_disptop_clk.h"
+
+#define PLLPMS_1000MHZ 0x33E8
+#define BANDCTL_1000MHZ 0xF
+#define PLLPMS_960MHZ 0x2280
+#define BANDCTL_960MHZ 0xF
+#define PLLPMS_900MHZ 0x2258
+#define BANDCTL_900MHZ 0xE
+#define PLLPMS_840MHZ 0x2230
+#define BANDCTL_840MHZ 0xD
+#define PLLPMS_750MHZ 0x43E8
+#define BANDCTL_750MHZ 0xC
+#define PLLPMS_660MHZ 0x21B8
+#define BANDCTL_660MHZ 0xB
+#define PLLPMS_600MHZ 0x2190
+#define BANDCTL_600MHZ 0xA
+#define PLLPMS_540MHZ 0x2168
+#define BANDCTL_540MHZ 0x9
+#define PLLPMS_512MHZ 0x03200
+#define BANDCTL_512MHZ 0x9
+#define PLLPMS_480MHZ 0x2281
+#define BANDCTL_480MHZ 0x8
+#define PLLPMS_420MHZ 0x2231
+#define BANDCTL_420MHZ 0x7
+#define PLLPMS_402MHZ 0x2219
+#define BANDCTL_402MHZ 0x7
+#define PLLPMS_330MHZ 0x21B9
+#define BANDCTL_330MHZ 0x6
+#define PLLPMS_300MHZ 0x2191
+#define BANDCTL_300MHZ 0x5
+#define PLLPMS_210MHZ 0x2232
+#define BANDCTL_210MHZ 0x4
+#define PLLPMS_180MHZ 0x21E2
+#define BANDCTL_180MHZ 0x3
+#define PLLPMS_150MHZ 0x2192
+#define BANDCTL_150MHZ 0x2
+#define PLLPMS_100MHZ 0x3323
+#define BANDCTL_100MHZ 0x1
+#define PLLPMS_80MHZ 0x3283
+#define BANDCTL_80MHZ 0x0
+
+#define MIPI_INDEX 0
+#define MIPI_EXC_PRE_VALUE 1
+#define MIPI_DSI_IRQ_MASK 29
+
+#define __io_address(a) (void *)(uintptr_t)(a)
+
+struct mipi_xfer_msg {
+ u8 id, data[2];
+ u16 flags;
+ const u8 *tx_buf;
+ u16 tx_len;
+ u8 *rx_buf;
+ u16 rx_len;
+};
+
+static void mipi_reset(void)
+{
+ /* tieoff */
+ nx_tieoff_set(NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAA, 3);
+ nx_tieoff_set(NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAB, 3);
+
+ /* reset */
+ nx_rstcon_setrst(RESET_ID_MIPI, RSTCON_ASSERT);
+ nx_rstcon_setrst(RESET_ID_MIPI_DSI, RSTCON_ASSERT);
+ nx_rstcon_setrst(RESET_ID_MIPI_CSI, RSTCON_ASSERT);
+ nx_rstcon_setrst(RESET_ID_MIPI_PHY_S, RSTCON_ASSERT);
+ nx_rstcon_setrst(RESET_ID_MIPI_PHY_M, RSTCON_ASSERT);
+
+ nx_rstcon_setrst(RESET_ID_MIPI, RSTCON_NEGATE);
+ nx_rstcon_setrst(RESET_ID_MIPI_DSI, RSTCON_NEGATE);
+ nx_rstcon_setrst(RESET_ID_MIPI_PHY_S, RSTCON_NEGATE);
+ nx_rstcon_setrst(RESET_ID_MIPI_PHY_M, RSTCON_NEGATE);
+}
+
+static void mipi_init(void)
+{
+ int clkid = DP_CLOCK_MIPI;
+ void *base;
+
+ /*
+ * neet to reset before open
+ */
+ mipi_reset();
+
+ base = __io_address(nx_disp_top_clkgen_get_physical_address(clkid));
+ nx_disp_top_clkgen_set_base_address(clkid, base);
+ nx_disp_top_clkgen_set_clock_pclk_mode(clkid, nx_pclkmode_always);
+
+ base = __io_address(nx_mipi_get_physical_address(0));
+ nx_mipi_set_base_address(0, base);
+}
+
+static int mipi_get_phy_pll(int bitrate, unsigned int *pllpms,
+ unsigned int *bandctl)
+{
+ unsigned int pms, ctl;
+
+ switch (bitrate) {
+ case 1000:
+ pms = PLLPMS_1000MHZ;
+ ctl = BANDCTL_1000MHZ;
+ break;
+ case 960:
+ pms = PLLPMS_960MHZ;
+ ctl = BANDCTL_960MHZ;
+ break;
+ case 900:
+ pms = PLLPMS_900MHZ;
+ ctl = BANDCTL_900MHZ;
+ break;
+ case 840:
+ pms = PLLPMS_840MHZ;
+ ctl = BANDCTL_840MHZ;
+ break;
+ case 750:
+ pms = PLLPMS_750MHZ;
+ ctl = BANDCTL_750MHZ;
+ break;
+ case 660:
+ pms = PLLPMS_660MHZ;
+ ctl = BANDCTL_660MHZ;
+ break;
+ case 600:
+ pms = PLLPMS_600MHZ;
+ ctl = BANDCTL_600MHZ;
+ break;
+ case 540:
+ pms = PLLPMS_540MHZ;
+ ctl = BANDCTL_540MHZ;
+ break;
+ case 512:
+ pms = PLLPMS_512MHZ;
+ ctl = BANDCTL_512MHZ;
+ break;
+ case 480:
+ pms = PLLPMS_480MHZ;
+ ctl = BANDCTL_480MHZ;
+ break;
+ case 420:
+ pms = PLLPMS_420MHZ;
+ ctl = BANDCTL_420MHZ;
+ break;
+ case 402:
+ pms = PLLPMS_402MHZ;
+ ctl = BANDCTL_402MHZ;
+ break;
+ case 330:
+ pms = PLLPMS_330MHZ;
+ ctl = BANDCTL_330MHZ;
+ break;
+ case 300:
+ pms = PLLPMS_300MHZ;
+ ctl = BANDCTL_300MHZ;
+ break;
+ case 210:
+ pms = PLLPMS_210MHZ;
+ ctl = BANDCTL_210MHZ;
+ break;
+ case 180:
+ pms = PLLPMS_180MHZ;
+ ctl = BANDCTL_180MHZ;
+ break;
+ case 150:
+ pms = PLLPMS_150MHZ;
+ ctl = BANDCTL_150MHZ;
+ break;
+ case 100:
+ pms = PLLPMS_100MHZ;
+ ctl = BANDCTL_100MHZ;
+ break;
+ case 80:
+ pms = PLLPMS_80MHZ;
+ ctl = BANDCTL_80MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *pllpms = pms;
+ *bandctl = ctl;
+
+ return 0;
+}
+
+static int mipi_prepare(int module, int input,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_mipi_dev *mipi)
+{
+ int index = MIPI_INDEX;
+ u32 esc_pre_value = MIPI_EXC_PRE_VALUE;
+ int lpm = mipi->lpm_trans;
+ int ret = 0;
+
+ ret = mipi_get_phy_pll(mipi->hs_bitrate,
+ &mipi->hs_pllpms, &mipi->hs_bandctl);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_get_phy_pll(mipi->lp_bitrate,
+ &mipi->lp_pllpms, &mipi->lp_bandctl);
+ if (ret < 0)
+ return ret;
+
+ debug("%s: mipi lp:%dmhz:0x%x:0x%x, hs:%dmhz:0x%x:0x%x, %s trans\n",
+ __func__, mipi->lp_bitrate, mipi->lp_pllpms, mipi->lp_bandctl,
+ mipi->hs_bitrate, mipi->hs_pllpms, mipi->hs_bandctl,
+ lpm ? "low" : "high");
+
+ if (lpm)
+ nx_mipi_dsi_set_pll(index, 1, 0xFFFFFFFF,
+ mipi->lp_pllpms, mipi->lp_bandctl, 0, 0);
+ else
+ nx_mipi_dsi_set_pll(index, 1, 0xFFFFFFFF,
+ mipi->hs_pllpms, mipi->hs_bandctl, 0, 0);
+
+#ifdef CONFIG_ARCH_S5P4418
+ /*
+ * disable the escape clock generating prescaler
+ * before soft reset.
+ */
+ nx_mipi_dsi_set_clock(index, 0, 0, 1, 1, 1, 0, 0, 0, 0, 10);
+ mdelay(1);
+#endif
+
+ nx_mipi_dsi_software_reset(index);
+ nx_mipi_dsi_set_clock(index, 0, 0, 1, 1, 1, 0, 0, 0, 1, esc_pre_value);
+ nx_mipi_dsi_set_phy(index, 0, 1, 1, 0, 0, 0, 0, 0);
+
+ if (lpm)
+ nx_mipi_dsi_set_escape_lp(index, nx_mipi_dsi_lpmode_lp,
+ nx_mipi_dsi_lpmode_lp);
+ else
+ nx_mipi_dsi_set_escape_lp(index, nx_mipi_dsi_lpmode_hs,
+ nx_mipi_dsi_lpmode_hs);
+ mdelay(20);
+
+ return 0;
+}
+
+static int mipi_enable(int module, int input,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_mipi_dev *mipi)
+{
+ struct mipi_dsi_device *dsi = &mipi->dsi;
+ int clkid = DP_CLOCK_MIPI;
+ int index = MIPI_INDEX;
+ int width = sync->h_active_len;
+ int height = sync->v_active_len;
+ int HFP = sync->h_front_porch;
+ int HBP = sync->h_back_porch;
+ int HS = sync->h_sync_width;
+ int VFP = sync->v_front_porch;
+ int VBP = sync->v_back_porch;
+ int VS = sync->v_sync_width;
+ int en_prescaler = 1;
+ u32 esc_pre_value = MIPI_EXC_PRE_VALUE;
+
+ int txhsclock = 1;
+ int lpm = mipi->lpm_trans;
+ bool command_mode = mipi->command_mode;
+
+ enum nx_mipi_dsi_format dsi_format;
+ int data_len = dsi->lanes - 1;
+ bool burst = dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST ? true : false;
+ bool eot_enable = dsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET ?
+ false : true;
+
+ /*
+ * disable the escape clock generating prescaler
+ * before soft reset.
+ */
+#ifdef CONFIG_ARCH_S5P4418
+ en_prescaler = 0;
+#endif
+
+ debug("%s: mode:%s, lanes.%d\n", __func__,
+ command_mode ? "command" : "video", data_len + 1);
+
+ if (lpm)
+ nx_mipi_dsi_set_escape_lp(index,
+ nx_mipi_dsi_lpmode_hs,
+ nx_mipi_dsi_lpmode_hs);
+
+ nx_mipi_dsi_set_pll(index, 1, 0xFFFFFFFF,
+ mipi->hs_pllpms, mipi->hs_bandctl, 0, 0);
+ mdelay(1);
+
+ nx_mipi_dsi_set_clock(index, 0, 0, 1, 1, 1, 0, 0, 0, en_prescaler, 10);
+ mdelay(1);
+
+ nx_mipi_dsi_software_reset(index);
+ nx_mipi_dsi_set_clock(index, txhsclock, 0, 1,
+ 1, 1, 0, 0, 0, 1, esc_pre_value);
+
+ switch (data_len) {
+ case 0: /* 1 lane */
+ nx_mipi_dsi_set_phy(index, data_len, 1, 1, 0, 0, 0, 0, 0);
+ break;
+ case 1: /* 2 lane */
+ nx_mipi_dsi_set_phy(index, data_len, 1, 1, 1, 0, 0, 0, 0);
+ break;
+ case 2: /* 3 lane */
+ nx_mipi_dsi_set_phy(index, data_len, 1, 1, 1, 1, 0, 0, 0);
+ break;
+ case 3: /* 3 lane */
+ nx_mipi_dsi_set_phy(index, data_len, 1, 1, 1, 1, 1, 0, 0);
+ break;
+ default:
+ printf("%s: not support data lanes %d\n",
+ __func__, data_len + 1);
+ return -EINVAL;
+ }
+
+ switch (dsi->format) {
+ case MIPI_DSI_FMT_RGB565:
+ dsi_format = nx_mipi_dsi_format_rgb565;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ dsi_format = nx_mipi_dsi_format_rgb666;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ dsi_format = nx_mipi_dsi_format_rgb666_packed;
+ break;
+ case MIPI_DSI_FMT_RGB888:
+ dsi_format = nx_mipi_dsi_format_rgb888;
+ break;
+ default:
+ printf("%s: not support format %d\n", __func__, dsi->format);
+ return -EINVAL;
+ }
+
+ nx_mipi_dsi_set_config_video_mode(index, 1, 0, burst,
+ nx_mipi_dsi_syncmode_event,
+ eot_enable, 1, 1, 1, 1, 0, dsi_format,
+ HFP, HBP, HS, VFP, VBP, VS, 0);
+
+ nx_mipi_dsi_set_size(index, width, height);
+
+ /* set mux */
+ nx_disp_top_set_mipimux(1, module);
+
+ /* 0 is spdif, 1 is mipi vclk */
+ nx_disp_top_clkgen_set_clock_source(clkid, 1, ctrl->clk_src_lv0);
+ nx_disp_top_clkgen_set_clock_divisor(clkid, 1,
+ ctrl->clk_div_lv1 *
+ ctrl->clk_div_lv0);
+
+ /* SPDIF and MIPI */
+ nx_disp_top_clkgen_set_clock_divisor_enable(clkid, 1);
+
+ /* START: CLKGEN, MIPI is started in setup function */
+ nx_disp_top_clkgen_set_clock_divisor_enable(clkid, true);
+ nx_mipi_dsi_set_enable(index, true);
+
+ return 0;
+}
+
+static int nx_mipi_transfer_tx(struct mipi_dsi_device *dsi,
+ struct mipi_xfer_msg *xfer)
+{
+ const u8 *txb;
+ int size, index = 0;
+ u32 data;
+
+ if (xfer->tx_len > DSI_TX_FIFO_SIZE)
+ printf("warn: tx %d size over fifo %d\n",
+ (int)xfer->tx_len, DSI_TX_FIFO_SIZE);
+
+ /* write payload */
+ size = xfer->tx_len;
+ txb = xfer->tx_buf;
+
+ while (size >= 4) {
+ data = (txb[3] << 24) | (txb[2] << 16) |
+ (txb[1] << 8) | (txb[0]);
+ nx_mipi_dsi_write_payload(index, data);
+ txb += 4, size -= 4;
+ data = 0;
+ }
+
+ switch (size) {
+ case 3:
+ data |= txb[2] << 16;
+ case 2:
+ data |= txb[1] << 8;
+ case 1:
+ data |= txb[0];
+ nx_mipi_dsi_write_payload(index, data);
+ break;
+ case 0:
+ break; /* no payload */
+ }
+
+ /* write packet hdr */
+ data = (xfer->data[1] << 16) | (xfer->data[0] << 8) | xfer->id;
+
+ nx_mipi_dsi_write_pkheader(index, data);
+
+ return 0;
+}
+
+static int nx_mipi_transfer_done(struct mipi_dsi_device *dsi)
+{
+ int index = 0, count = 100;
+ u32 value;
+
+ do {
+ mdelay(1);
+ value = nx_mipi_dsi_read_fifo_status(index);
+ if (((1 << 22) & value))
+ break;
+ } while (count-- > 0);
+
+ if (count < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int nx_mipi_transfer_rx(struct mipi_dsi_device *dsi,
+ struct mipi_xfer_msg *xfer)
+{
+ u8 *rxb = xfer->rx_buf;
+ int index = 0, rx_len = 0;
+ u32 data, count = 0;
+ u16 size;
+ int err = -EINVAL;
+
+ nx_mipi_dsi_clear_interrupt_pending(index, 18);
+
+ while (1) {
+ /* Completes receiving data. */
+ if (nx_mipi_dsi_get_interrupt_pending(index, 18))
+ break;
+
+ mdelay(1);
+
+ if (count > 500) {
+ printf("%s: error recevice data\n", __func__);
+ err = -EINVAL;
+ goto clear_fifo;
+ } else {
+ count++;
+ }
+ }
+
+ data = nx_mipi_dsi_read_fifo(index);
+
+ switch (data & 0x3f) {
+ case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+ case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+ if (xfer->rx_len >= 2) {
+ rxb[1] = data >> 16;
+ rx_len++;
+ }
+
+ /* Fall through */
+ case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+ case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+ rxb[0] = data >> 8;
+ rx_len++;
+ xfer->rx_len = rx_len;
+ err = rx_len;
+ goto clear_fifo;
+
+ case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+ printf("DSI Error Report: 0x%04x\n", (data >> 8) & 0xffff);
+ err = rx_len;
+ goto clear_fifo;
+ }
+
+ size = (data >> 8) & 0xffff;
+
+ if (size > xfer->rx_len)
+ size = xfer->rx_len;
+ else if (size < xfer->rx_len)
+ xfer->rx_len = size;
+
+ size = xfer->rx_len - rx_len;
+ rx_len += size;
+
+ /* Receive payload */
+ while (size >= 4) {
+ data = nx_mipi_dsi_read_fifo(index);
+ rxb[0] = (data >> 0) & 0xff;
+ rxb[1] = (data >> 8) & 0xff;
+ rxb[2] = (data >> 16) & 0xff;
+ rxb[3] = (data >> 24) & 0xff;
+ rxb += 4, size -= 4;
+ }
+
+ if (size) {
+ data = nx_mipi_dsi_read_fifo(index);
+ switch (size) {
+ case 3:
+ rxb[2] = (data >> 16) & 0xff;
+ case 2:
+ rxb[1] = (data >> 8) & 0xff;
+ case 1:
+ rxb[0] = data & 0xff;
+ }
+ }
+
+ if (rx_len == xfer->rx_len)
+ err = rx_len;
+
+clear_fifo:
+ size = DSI_RX_FIFO_SIZE / 4;
+ do {
+ data = nx_mipi_dsi_read_fifo(index);
+ if (data == DSI_RX_FIFO_EMPTY)
+ break;
+ } while (--size);
+
+ return err;
+}
+
+#define IS_SHORT(t) (9 > ((t) & 0x0f))
+
+static int nx_mipi_transfer(struct mipi_dsi_device *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ struct mipi_xfer_msg xfer;
+ int err;
+
+ if (!msg->tx_len)
+ return -EINVAL;
+
+ /* set id */
+ xfer.id = msg->type | (msg->channel << 6);
+
+ /* short type msg */
+ if (IS_SHORT(msg->type)) {
+ const char *txb = msg->tx_buf;
+
+ if (msg->tx_len > 2)
+ return -EINVAL;
+
+ xfer.tx_len = 0; /* no payload */
+ xfer.data[0] = txb[0];
+ xfer.data[1] = (msg->tx_len == 2) ? txb[1] : 0;
+ xfer.tx_buf = NULL;
+ } else {
+ xfer.tx_len = msg->tx_len;
+ xfer.data[0] = msg->tx_len & 0xff;
+ xfer.data[1] = msg->tx_len >> 8;
+ xfer.tx_buf = msg->tx_buf;
+ }
+
+ xfer.rx_len = msg->rx_len;
+ xfer.rx_buf = msg->rx_buf;
+ xfer.flags = msg->flags;
+
+ err = nx_mipi_transfer_tx(dsi, &xfer);
+
+ if (xfer.rx_len)
+ err = nx_mipi_transfer_rx(dsi, &xfer);
+
+ nx_mipi_transfer_done(dsi);
+
+ return err;
+}
+
+static ssize_t nx_mipi_write_buffer(struct mipi_dsi_device *dsi,
+ const void *data, size_t len)
+{
+ struct mipi_dsi_msg msg = {
+ .channel = dsi->channel,
+ .tx_buf = data,
+ .tx_len = len
+ };
+
+ switch (len) {
+ case 0:
+ return -EINVAL;
+ case 1:
+ msg.type = MIPI_DSI_DCS_SHORT_WRITE;
+ break;
+ case 2:
+ msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
+ break;
+ default:
+ msg.type = MIPI_DSI_DCS_LONG_WRITE;
+ break;
+ }
+
+ if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
+ msg.flags |= MIPI_DSI_MSG_USE_LPM;
+
+ return nx_mipi_transfer(dsi, &msg);
+}
+
+__weak int nx_mipi_dsi_lcd_bind(struct mipi_dsi_device *dsi)
+{
+ return 0;
+}
+
+/*
+ * disply
+ * MIPI DSI Setting
+ * (1) Initiallize MIPI(DSIM,DPHY,PLL)
+ * (2) Initiallize LCD
+ * (3) ReInitiallize MIPI(DSIM only)
+ * (4) Turn on display(MLC,DPC,...)
+ */
+void nx_mipi_display(int module,
+ struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+ struct dp_plane_top *top, struct dp_plane_info *planes,
+ struct dp_mipi_dev *dev)
+{
+ struct dp_plane_info *plane = planes;
+ struct mipi_dsi_device *dsi = &dev->dsi;
+ int input = module == 0 ? DP_DEVICE_DP0 : DP_DEVICE_DP1;
+ int count = top->plane_num;
+ int i = 0, ret;
+
+ printf("MIPI: dp.%d\n", module);
+
+ /* map mipi-dsi write callback func */
+ dsi->write_buffer = nx_mipi_write_buffer;
+
+ ret = nx_mipi_dsi_lcd_bind(dsi);
+ if (ret) {
+ printf("Error: bind mipi-dsi lcd driver !\n");
+ return;
+ }
+
+ dp_control_init(module);
+ dp_plane_init(module);
+
+ mipi_init();
+
+ /* set plane */
+ dp_plane_screen_setup(module, top);
+
+ for (i = 0; count > i; i++, plane++) {
+ if (!plane->enable)
+ continue;
+ dp_plane_layer_setup(module, plane);
+ dp_plane_layer_enable(module, plane, 1);
+ }
+ dp_plane_screen_enable(module, 1);
+
+ /* set mipi */
+ mipi_prepare(module, input, sync, ctrl, dev);
+
+ if (dsi->ops && dsi->ops->prepare)
+ dsi->ops->prepare(dsi);
+
+ if (dsi->ops && dsi->ops->enable)
+ dsi->ops->enable(dsi);
+
+ mipi_enable(module, input, sync, ctrl, dev);
+
+ /* set dp control */
+ dp_control_setup(module, sync, ctrl);
+ dp_control_enable(module, 1);
+}