diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index bd80cb7..58dc564 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -42,8 +42,6 @@
 
 #include "../common/sgmii_riser.h"
 
-phys_size_t fixed_sdram(void);
-
 int board_early_init_f (void)
 {
 #ifdef CONFIG_MMC
@@ -98,25 +96,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index d354a26..deab811 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -39,8 +39,6 @@
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
 
 int checkboard (void)
 {
@@ -61,54 +59,6 @@
 	return 0;
 }
 
-
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
 /*
  * Initialize Local Bus
  */
@@ -232,7 +182,7 @@
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
 	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index a9925d5..adcc0ad 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -106,25 +106,6 @@
 	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 8, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 59ec604..59df2bd 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -42,7 +42,6 @@
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
 
 /*
  * I/O Port configuration table
@@ -242,48 +241,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 2b6900c..caea2f4 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -68,23 +68,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
 #endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index ebeb897..a4a35fa 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -42,7 +42,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
-void sdram_init(void);
 
 int checkboard (void)
 {
@@ -75,43 +74,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index edaba26..5fe7f13 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -40,7 +40,6 @@
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
 
 /*
  * I/O Port configuration table
@@ -240,50 +239,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 2ae0459..49701ef 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -44,8 +44,6 @@
 
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
 
 
 /*
@@ -266,54 +264,6 @@
 	return 0;
 }
 
-
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
 /*
  * Initialize Local Bus
  */
@@ -437,7 +387,7 @@
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
 	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
index a9925d5..adcc0ad 100644
--- a/board/freescale/mpc8560ads/tlb.c
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -106,25 +106,6 @@
 	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 8, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 71cfbf0..85885fc 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -101,7 +101,6 @@
 };
 
 void local_bus_init(void);
-void sdram_init(void);
 
 int board_early_init_f (void)
 {
@@ -138,43 +137,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 9700b8c..07db16a 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -45,8 +45,6 @@
 #include "../common/pq-mds-pib.h"
 #endif
 
-phys_size_t fixed_sdram(void);
-
 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* QE_MUX_MDC */
 	{2,  31, 1, 0, 1}, /* QE_MUX_MDC               */
@@ -245,40 +243,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * Work around to stabilize DDR DLL MSYNC_IN.
-	 * Errata DDR9 seems to have been fixed.
-	 * This is now the workaround for Errata DDR11:
-	 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-	 */
-	volatile ccsr_gur_t *gur =
-			(void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	out_be32(&gur->ddrdllcr, 0x81000000);
-	udelay(200);
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #if !defined(CONFIG_SPD_EEPROM)
 phys_size_t fixed_sdram(void)
 {
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index c217c27..c69dfe4 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -39,8 +39,6 @@
 
 #include "../common/sgmii_riser.h"
 
-long int fixed_sdram(void);
-
 int checkboard (void)
 {
 	u8 vboot;
@@ -74,23 +72,6 @@
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
 
 #if !defined(CONFIG_SPD_EEPROM)
 /*
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 7cb549b..e3e8300 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -76,19 +76,6 @@
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....\n");
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #define CONFIG_TFP410_I2C_ADDR	0x38
 
 /* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
index 15b46b0..e54fde2 100644
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ b/board/freescale/p1_p2_rdb/ddr.c
@@ -239,19 +239,6 @@
 
 	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
 
+	set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1);
 	return ddr_size;
 }
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	dram_size = fixed_sdram();
-	set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR_1);
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("DDR: ");
-	return dram_size;
-}
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 07b0801..40589da 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -44,8 +44,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-phys_size_t fixed_sdram(void);
-
 int checkboard(void)
 {
 	u8 sw;
@@ -70,31 +68,6 @@
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-#ifdef CONFIG_DDR_SPD
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-			 dram_size,
-			 LAW_TRGT_IF_DDR) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	};
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #if !defined(CONFIG_DDR_SPD)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
@@ -170,6 +143,13 @@
 	udelay(500);
 #endif
 
+	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+			 CONFIG_SYS_SDRAM_SIZE * 1024 * 1024,
+			 LAW_TRGT_IF_DDR) < 0) {
+		printf("ERROR setting Local Access Windows for DDR\n");
+		return 0;
+	};
+
 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 06c1eea..1bce6fa 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -43,8 +43,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram (void);
 
 int board_early_init_f (void)
 {
@@ -69,47 +67,6 @@
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		out_be32(&gur->ddrdllcr, 0x81000000);
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
@@ -268,7 +225,7 @@
  *  fixed_sdram init -- doesn't use serial presence detect.
  *  assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
 	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
index 38bdeb3..bb4c052 100644
--- a/board/sbc8548/tlb.c
+++ b/board/sbc8548/tlb.c
@@ -65,44 +65,34 @@
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
 	/*
-	 * TLB 2:	256M Cacheable, non-guarded
-	 * 0x0		256M DDR SDRAM
-	 */
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-#endif
-
-	/*
-	 * TLB 3:	64M	Non-cacheable, guarded
+	 * TLB 2:	64M	Non-cacheable, guarded
 	 * 0xe0000000	1M	CCSRBAR
 	 * 0xe2000000	8M	PCI1 IO
 	 * 0xe2800000	8M	PCIe IO
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_64M, 1),
+		      0, 2, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 4:	64M	Cacheable, non-guarded
+	 * TLB 3:	64M	Cacheable, non-guarded
 	 * 0xf0000000	64M	LBC SDRAM First half
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 4, BOOKE_PAGESZ_64M, 1),
+		      0, 3, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 5:	64M	Cacheable, non-guarded
+	 * TLB 4:	64M	Cacheable, non-guarded
 	 * 0xf4000000	64M	LBC SDRAM Second half
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
 		      CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 5, BOOKE_PAGESZ_64M, 1),
+		      0, 4, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 6:	16M	Cacheable, non-guarded
+	 * TLB 5:	16M	Cacheable, non-guarded
 	 * 0xf8000000	1M	7-segment LED display
 	 * 0xf8100000	1M	User switches
 	 * 0xf8300000	1M	Board revision
@@ -110,24 +100,24 @@
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_16M, 1),
+		      0, 5, BOOKE_PAGESZ_16M, 1),
 
 	/*
-	 * TLB 7:	4M	Non-cacheable, guarded
+	 * TLB 6:	4M	Non-cacheable, guarded
 	 * 0xfb800000	4M	1st 4MB block of 64MB user FLASH
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_4M, 1),
+		      0, 6, BOOKE_PAGESZ_4M, 1),
 
 	/*
-	 * TLB 8:	4M	Non-cacheable, guarded
+	 * TLB 7:	4M	Non-cacheable, guarded
 	 * 0xfbc00000	4M	2nd 4MB block of 64MB user FLASH
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000,
 		      CONFIG_SYS_ALT_FLASH + 0x400000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_4M, 1),
+		      0, 7, BOOKE_PAGESZ_4M, 1),
 
 };
 
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index 7bf8179..c5fe92e 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -38,8 +38,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-long int fixed_sdram (void);
-
 /*
  * I/O Port configuration table
  *
@@ -263,95 +261,6 @@
 }
 
 
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if 0
-#if !defined(CONFIG_RAM_AS_FLASH)
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	sys_info_t sysinfo;
-	uint temp_lbcdll = 0;
-#endif
-#endif /* 0 */
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif
-#if defined(CONFIG_DDR_DLL)
-	uint temp_ddrdll = 0;
-
-	/* Work around to stabilize DDR DLL */
-	temp_ddrdll = gur->ddrdllcr;
-	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	asm("sync;isync;msync");
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if 0
-#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
-	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
-		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
-	} else {
-#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
-		lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
-#endif
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
-		udelay(200);
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
-	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
-	asm("sync");
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	asm("sync");
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	asm("sync");
-#endif
-#endif
-
-#if defined(CONFIG_DDR_ECC)
-	{
-		/* Initialize all of memory for ECC, then
-		 * enable errors */
-		volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
-		dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
-		/* Enable errors for ECC */
-		ddr->err_disable = 0x00000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	return dram_size;
-}
-
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
@@ -390,7 +299,7 @@
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
 
 #define CONFIG_SYS_DDR_CONTROL 0xc2000000
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index ef897b2..c8235f4 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -39,7 +39,7 @@
  *       so this should be extended for other future boards
  *       using this routine!
  */
-long int fixed_sdram(void)
+phys_size_t fixed_sdram(void)
 {
 	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
@@ -77,19 +77,6 @@
 }
 #endif
 
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-	return dram_size;
-}
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c
index 1ed340e..de22bf5 100644
--- a/board/stx/stxgp3/stxgp3.c
+++ b/board/stx/stxgp3/stxgp3.c
@@ -40,8 +40,6 @@
 #include <spd_sdram.h>
 #include <miiphy.h>
 
-long int fixed_sdram (void);
-
 /*
  * I/O Port configuration table
  *
@@ -277,36 +275,6 @@
 	next_led_update += (get_tbclk() / 4);
 }
 
-phys_size_t
-initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-		uint temp_ddrdll = 0;
-
-		/* Work around to stabilize DDR DLL */
-		temp_ddrdll = gur->ddrdllcr;
-		gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC)
-	/* Initialize and enable DDR ECC.
-	*/
-	ddr_enable_ecc(dram_size);
-#endif
-
-	return dram_size;
-}
-
 
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c
index 6cd28a3..83ffcd2 100644
--- a/board/stx/stxssa/stxssa.c
+++ b/board/stx/stxssa/stxssa.c
@@ -41,8 +41,6 @@
 #include <miiphy.h>
 #include <netdev.h>
 
-long int fixed_sdram (void);
-
 /*
  * I/O Port configuration table
  *
@@ -294,37 +292,6 @@
 	next_led_update += (get_tbclk() / 4);
 }
 
-phys_size_t
-initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-		uint temp_ddrdll = 0;
-
-		/* Work around to stabilize DDR DLL */
-		temp_ddrdll = gur->ddrdllcr;
-		gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC)
-	/* Initialize and enable DDR ECC.
-	*/
-	ddr_enable_ecc(dram_size);
-#endif
-
-	return dram_size;
-}
-
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c
index 260cd1c..b2d3185 100644
--- a/board/tqc/tqm85xx/sdram.c
+++ b/board/tqc/tqm85xx/sdram.c
@@ -394,43 +394,6 @@
 	return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
 }
 
-phys_size_t initdram (int board_type)
-{
-	phys_size_t dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * This DLL-Override only used on TQM8540 and TQM8560
-	 */
-	{
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-		int i, x;
-
-		x = 10;
-
-		/*
-		 * Work around to stabilize DDR DLL
-		 */
-		gur->ddrdllcr = 0x81000000;
-		asm ("sync; isync; msync");
-		udelay (200);
-		while (gur->ddrdllcr != 0x81000100) {
-			gur->devdisr = gur->devdisr | 0x00010000;
-			asm ("sync; isync; msync");
-			for (i = 0; i < x; i++)
-				;
-			gur->devdisr = gur->devdisr & 0xfff7ffff;
-			asm ("sync; isync; msync");
-			x++;
-		}
-	}
-#endif
-
-	dram_size = fixed_sdram();
-
-	return dram_size;
-}
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
index 75dd348..f9f8cc9 100644
--- a/board/tqc/tqm85xx/tlb.c
+++ b/board/tqc/tqm85xx/tlb.c
@@ -120,36 +120,6 @@
 	SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 6, BOOKE_PAGESZ_64M, 1),
-
-#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE)
-	/*
-	 * TLB 7+8:	  2G	 DDR, cache enabled
-	 * 0x00000000	  2G	 DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 */
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		       0, 7, BOOKE_PAGESZ_1G, 1),
-
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-		       CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		       0, 8, BOOKE_PAGESZ_1G, 1),
-#else
-	/*
-	 * TLB 7+8:	512M	 DDR, cache disabled (needed for memory test)
-	 * 0x00000000	512M	 DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 */
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 7, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 8, BOOKE_PAGESZ_256M, 1),
-#endif
 #ifdef CONFIG_PCIE1
 	/*
 	 * TLB 9:	 16M	Non-cacheable, guarded
@@ -228,23 +198,6 @@
 	SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 7, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLB 8+9:	512M	 DDR, cache disabled (needed for memory test)
-	 * 0x00000000	512M	 DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 8, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 9, BOOKE_PAGESZ_256M, 1),
-
 #ifdef CONFIG_PCIE1
 	/*
 	 * TLB 10:	 16M	Non-cacheable, guarded
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index 7604f62..39d105f 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -33,8 +33,6 @@
 COBJS-$(CONFIG_MPC8572)		+= fsl_8xxx_clk.o
 COBJS-$(CONFIG_MPC86xx)		+= fsl_8xxx_clk.o
 COBJS-$(CONFIG_P2020)		+= fsl_8xxx_clk.o
-COBJS-$(CONFIG_FSL_DDR2)	+= fsl_8xxx_ddr.o
-COBJS-$(CONFIG_FSL_DDR3)	+= fsl_8xxx_ddr.o
 COBJS-$(CONFIG_MPC85xx)		+= fsl_8xxx_misc.o board.o
 COBJS-$(CONFIG_MPC86xx)		+= fsl_8xxx_misc.o board.o
 COBJS-$(CONFIG_NAND_ACTL)	+= actl_nand.o
diff --git a/board/xes/common/fsl_8xxx_ddr.c b/board/xes/common/fsl_8xxx_ddr.c
deleted file mode 100644
index 81ee70d..0000000
--- a/board/xes/common/fsl_8xxx_ddr.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2008 Extreme Engineering Solutions, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = fsl_ddr_sdram();
-
-#ifdef CONFIG_MPC85xx
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/* Initialize and enable DDR ECC */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	return dram_size;
-}
diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c
index 0f7fa6c..572a908 100644
--- a/board/xes/xpedite517x/xpedite517x.c
+++ b/board/xes/xpedite517x/xpedite517x.c
@@ -22,6 +22,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
 #include <asm/mmu.h>
 #include <asm/io.h>
 #include <fdt_support.h>
@@ -71,6 +72,18 @@
 	return 0;
 }
 
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = fsl_ddr_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/* Initialize and enable DDR ECC */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	return dram_size;
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {