board: lenovo: ideapad-yoga-11: add Lenovo Ideapad Yoga 11 support
The Lenovo IdeaPad Yoga 11 is a hybrid laptop/tablet Windows RT-based
computer released in late 2012. The device uses a 1.3 GHz quad-core
Nvidia Tegra 3 chipset with 2 GB of RAM, features a 11.6 inch 1366x768
screen and 32/64 GB of internal memory that can be supplemented with
a microSDXC card slot, full size SD card slot and 2 full size USB 2.0
ports.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
diff --git a/include/configs/ideapad-yoga-11.h b/include/configs/ideapad-yoga-11.h
new file mode 100644
index 0000000..12c7649
--- /dev/null
+++ b/include/configs/ideapad-yoga-11.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra30-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "Lenovo Ideapad Yoga 11"
+
+#define IDEAPAD_FLASH_UBOOT \
+ "flash_uboot=sf probe 0:1;" \
+ "echo Dumping current SPI flash content ...;" \
+ "sf read ${kernel_addr_r} 0x0 ${spi_size};" \
+ "if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
+ "then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
+ "echo Reading SPI flash binary;" \
+ "if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
+ "then echo Writing bootloader into SPI flash;" \
+ "sf probe 0:1;" \
+ "sf update ${kernel_addr_r} 0x0 ${spi_size};" \
+ "echo Bootloader SUCCESSFULLY written into SPI flash;" \
+ "pause 'Press ANY key to reboot...'; reset;" \
+ "else echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+ "echo Reading bootloader;" \
+ "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 1:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader into SPI flash;" \
+ "sf probe 0:1;" \
+ "sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+ "sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
+ "echo Bootloader written SUCCESSFULLY;" \
+ "pause 'Press ANY key to reboot...'; reset;" \
+ "else echo Reading bootloader failed;" \
+ "pause 'Press ANY key to reboot...'; reset; fi;" \
+ "fi;" \
+ "else echo SPI flash backup FAILED! Aborting ...;" \
+ "pause 'Press ANY key to reboot...'; reset; fi\0"
+
+#define IDEAPAD_BOOTMENU \
+ IDEAPAD_FLASH_UBOOT \
+ "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+ "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
+ "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+ "bootmenu_3=update bootloader=run flash_uboot\0" \
+ "bootmenu_4=reboot RCM=enterrcm\0" \
+ "bootmenu_5=reboot=reset\0" \
+ "bootmenu_6=power off=poweroff\0" \
+ "bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+ "spi_size=0x400000\0" \
+ "boot_block_size_r=0x200000\0" \
+ "boot_block_size=0x1000\0" \
+ "bootloader_file=u-boot-dtb-tegra.bin\0" \
+ "button_cmd_0_name=Volume Down\0" \
+ "button_cmd_0=bootmenu\0" \
+ "button_cmd_1_name=Lid sensor\0" \
+ "button_cmd_1=poweroff\0" \
+ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ IDEAPAD_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */