diff --git a/doc/board/lenovo/ideapad-yoga-11.rst b/doc/board/lenovo/ideapad-yoga-11.rst
new file mode 100644
index 0000000..94bf171
--- /dev/null
+++ b/doc/board/lenovo/ideapad-yoga-11.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the Lenovo Ideapad Yoga 11 tablet
+============================================
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Boot
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+    $ export CROSS_COMPILE=arm-linux-gnueabi-
+    $ make ideapad-yoga-11_defconfig
+    $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for loading.
+
+Boot
+----
+
+Currently, U-Boot can be preloaded into RAM via the Fusée Gelée. To enter
+RCM protocol use ``power`` and ``volume up`` key combination from powered
+off device. The host PC should recognize an APX device.
+
+Built U-Boot ``u-boot-dtb-tegra.bin`` can be loaded from fusee-tools
+directory with
+
+.. code-block:: bash
+
+    $ ./run_bootloader.sh -s T30 -t ./bct/ideapad-yoga-11.bct
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD and then on
+eMMC. Additionally, if the Volume Down button is pressed while loading, the
+device will enter bootmenu. Bootmenu contains entries to mount MicroSD and eMMC
+as mass storage, fastboot, reboot, reboot RCM, poweroffand enter U-Boot console.
diff --git a/doc/board/lenovo/index.rst b/doc/board/lenovo/index.rst
new file mode 100644
index 0000000..2ce457a
--- /dev/null
+++ b/doc/board/lenovo/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Lenovo
+=========
+
+.. toctree::
+   :maxdepth: 2
+
+   ideapad-yoga-11