diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi
index 35a88bf..ec6fba5 100644
--- a/arch/arm/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard.dtsi
@@ -8,10 +8,6 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	aliases {
-		mmc0 = &usdhc3;
-	};
-
 	chosen {
 		stdout-path = &uart1;
 	};
@@ -37,6 +33,30 @@
 		spdif-out;
 	};
 
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
 	reg_2p5v: regulator-2p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "2P5V";
@@ -77,15 +97,21 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	codec: sgtl5000@a {
@@ -98,6 +124,29 @@
 		VDDIO-supply = <&reg_3p3v>;
 		lrclk-strength = <3>;
 	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
 };
 
 &iomuxc {
@@ -132,7 +181,6 @@
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
@@ -143,6 +191,13 @@
 			>;
 		};
 
+		pinctrl_i2c1_gpio: i2c1gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
+			>;
+		};
+
 		pinctrl_i2c2: i2c2grp {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
@@ -150,12 +205,27 @@
 			>;
 		};
 
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
+			>;
+		};
+
 		pinctrl_mclk: mclkgrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
 			>;
 		};
 
+		pinctrl_ov5645: ov5645grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			>;
+		};
+
 		pinctrl_spdif: spdifgrp {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
@@ -231,9 +301,6 @@
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
 	status = "okay";
 
 	mdio {
@@ -242,6 +309,21 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
 		};
 	};
 };