ARM: legoev3: increase flash image sizes
This increases the kernel image to 4M and the rootfs image to 10M.
It is getting hard to get a kernel image to fit in 3M.
Signed-off-by: David Lechner <david@lechnology.com>
diff --git a/board/lego/ev3/README b/board/lego/ev3/README
index 1a50ca9..a356373 100644
--- a/board/lego/ev3/README
+++ b/board/lego/ev3/README
@@ -14,8 +14,8 @@
is, it will run the script and boot the kernel from the uImage file also in
the FAT partition. Otherwise, it will load a kernel and rootfs from the flash.
The kernel must be stored at address 0x50000 on the flash and have a maximum
-size of 3MiB. The rootfs must be a squasfs image and stored at 0x350000 in the
-flash and have a maximum size of 9.3MiB. The flash starting at 0xCB0000 is
+size of 4MiB. The rootfs must be a squasfs image and stored at 0x450000 in the
+flash and have a maximum size of 10MiB. The flash starting at 0xE50000 is
reserved for user data.
Writing image to flash