arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5
There have been a few updates including flexspi, so it's necessary
to re-sync.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/imx8mn-beacon-baseboard.dtsi b/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
index 49bff19..376ca8f 100644
--- a/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
@@ -34,6 +34,15 @@
};
};
+ reg_audio: regulator-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_aud";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "vsd_3v3";
@@ -53,6 +62,20 @@
gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ sound {
+ compatible = "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ audio-cpu = <&sai3>;
+ audio-codec = <&wm8962>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ };
};
&ecspi2 {
@@ -98,8 +121,46 @@
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
};
+
+ wm8962: audio-codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+ clock-names = "xclk";
+ DCVDD-supply = <®_audio>;
+ DBVDD-supply = <®_audio>;
+ AVDD-supply = <®_audio>;
+ CPVDD-supply = <®_audio>;
+ MICVDD-supply = <®_audio>;
+ PLLVDD-supply = <®_audio>;
+ SPKVDD1-supply = <®_audio>;
+ SPKVDD2-supply = <®_audio>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
};
+&easrc {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -177,6 +238,16 @@
>;
};
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
diff --git a/arch/arm/dts/imx8mn-beacon-som.dtsi b/arch/arm/dts/imx8mn-beacon-som.dtsi
index 52a50d9..de2cd0e 100644
--- a/arch/arm/dts/imx8mn-beacon-som.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-som.dtsi
@@ -4,6 +4,12 @@
*/
/ {
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &snvs_rtc;
+ spi0 = &flexspi;
+ };
+
usdhc1_pwrseq: usdhc1_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -36,11 +42,39 @@
cpu-supply = <&buck2_reg>;
};
+/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
+&a53_opp_table {
+ opp-1200000000 {
+ opp-microvolt = <950000>;
+ };
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
+ phy-supply = <&buck6_reg>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
fsl,magic-packet;
status = "okay";
@@ -56,6 +90,22 @@
};
};
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi>;
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -184,7 +234,7 @@
reg = <0x50>;
};
- rtc@51 {
+ rtc: rtc@51 {
compatible = "nxp,pcf85263";
reg = <0x51>;
};
@@ -285,6 +335,17 @@
>;
};
+ pinctrl_flexspi: flexspigrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
+ MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+ >;
+ };
+
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
diff --git a/arch/arm/dts/imx8mn.dtsi b/arch/arm/dts/imx8mn.dtsi
index ee17902..16ea500 100644
--- a/arch/arm/dts/imx8mn.dtsi
+++ b/arch/arm/dts/imx8mn.dtsi
@@ -241,10 +241,12 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mn-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ nvmem-cells = <&imx8mn_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -253,7 +255,7 @@
#size-cells = <1>;
ranges;
- spba: bus@30000000 {
+ spba: spba-bus@30000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -531,9 +533,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mn_uid: unique-id@410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop@30360000 {
@@ -581,7 +591,9 @@
<&clk IMX8MN_CLK_NOC>,
<&clk IMX8MN_CLK_AUDIO_AHB>,
<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
- <&clk IMX8MN_SYS_PLL3>;
+ <&clk IMX8MN_SYS_PLL3>,
+ <&clk IMX8MN_AUDIO_PLL1>,
+ <&clk IMX8MN_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
<&clk IMX8MN_ARM_PLL_OUT>,
<&clk IMX8MN_SYS_PLL3_OUT>,
@@ -589,7 +601,9 @@
assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
- <600000000>;
+ <600000000>,
+ <393216000>,
+ <361267200>;
};
src: reset-controller@30390000 {
@@ -875,6 +889,19 @@
status = "disabled";
};
+ flexspi: spi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+ <&clk IMX8MN_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ status = "disabled";
+ };
+
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
@@ -903,13 +930,18 @@
assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
<&clk IMX8MN_CLK_ENET_TIMER>,
<&clk IMX8MN_CLK_ENET_REF>,
- <&clk IMX8MN_CLK_ENET_TIMER>;
+ <&clk IMX8MN_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_SYS_PLL2_100M>,
- <&clk IMX8MN_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ <&clk IMX8MN_SYS_PLL2_125M>,
+ <&clk IMX8MN_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ nvmem_macaddr_swap;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};