arm64: dts: rk3399: Sync v5.7-rc1 from Linux
Sync rk3399 dts(i) files from v5.7-rc1 linux-next.
Reason:
To get updated PCIe nodes and properties on respective
dts(i) files.
Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
- rk3399-puma-u-boot.dtsi spiflash label changed to norflash
- move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci into rk3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/cros-ec-keyboard.dtsi b/arch/arm/dts/cros-ec-keyboard.dtsi
index 9c7fb0a..4a0c103 100644
--- a/arch/arm/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/dts/cros-ec-keyboard.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Keyboard dts fragment for devices that use cros-ec-keyboard
*
* Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <dt-bindings/input/input.h>
@@ -22,6 +19,7 @@
MATRIX_KEY(0x00, 0x02, KEY_F1)
MATRIX_KEY(0x00, 0x03, KEY_B)
MATRIX_KEY(0x00, 0x04, KEY_F10)
+ MATRIX_KEY(0x00, 0x05, KEY_RO)
MATRIX_KEY(0x00, 0x06, KEY_N)
MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +32,7 @@
MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
MATRIX_KEY(0x01, 0x09, KEY_F9)
MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+ MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +44,7 @@
MATRIX_KEY(0x02, 0x07, KEY_102ND)
MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
MATRIX_KEY(0x02, 0x09, KEY_F8)
+ MATRIX_KEY(0x02, 0x0a, KEY_YEN)
MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -52,7 +52,9 @@
MATRIX_KEY(0x03, 0x04, KEY_F5)
MATRIX_KEY(0x03, 0x06, KEY_6)
MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+ MATRIX_KEY(0x03, 0x09, KEY_F13)
MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+ MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
MATRIX_KEY(0x04, 0x01, KEY_A)
diff --git a/arch/arm/dts/cros-ec-sbs.dtsi b/arch/arm/dts/cros-ec-sbs.dtsi
index dfe5ea6..71f5c5e 100644
--- a/arch/arm/dts/cros-ec-sbs.dtsi
+++ b/arch/arm/dts/cros-ec-sbs.dtsi
@@ -1,8 +1,45 @@
-// SPDX-License-Identifier: GPL-2.0
/*
* Smart battery dts fragment for devices that use cros-ec-sbs
*
* Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
&i2c_tunnel {
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index c72719c..694b0d0 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -1,86 +1,18 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3399.dtsi"
/ {
model = "Rockchip RK3399 Evaluation Board";
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
- "google,rk3399evb-rev2";
-
- chosen {
- stdout-path = &uart2;
- };
-
- vdd_center: vdd-center {
- compatible = "pwm-regulator";
- pwms = <&pwm3 0 25000 1>;
- regulator-name = "vdd_center";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-init-microvolt = <950000>;
- regulator-always-on;
- regulator-boot-on;
- status = "okay";
- };
-
- vccsys: vccsys {
- compatible = "regulator-fixed";
- regulator-name = "vccsys";
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc5v0_host: vcc5v0-host-en {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_host";
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
- };
-
- vcc5v0_typec0: vcc5v0-typec0-en {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_typec0";
- gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- vcc5v0_typec1: vcc5v0-typec1-en {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_typec1";
- gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
+ compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
backlight: backlight {
compatible = "pwm-backlight";
- power-supply = <&vccsys>;
- enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
brightness-levels = <
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@@ -116,43 +48,352 @@
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
pwms = <&pwm0 0 25000 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- pwm-delay-us = <10000>;
- status = "disabled";
};
- panel:panel {
- compatible = "simple-panel";
- power-supply = <&vcc33_lcd>;
+ edp_panel: edp-panel {
+ compatible ="lg,lp079qx1-sp0v";
backlight = <&backlight>;
- /*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/
- status = "disabled";
+ enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vcc3v3_s0>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
};
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vdd_center: vdd-center {
+ compatible = "pwm-regulator";
+ pwms = <&pwm3 0 25000 0>;
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
};
+&edp {
+ status = "okay";
+ force-hpd;
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
&emmc_phy {
status = "okay";
};
-&pwm0 {
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
status = "okay";
};
-&pwm2 {
+&i2c0 {
status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_tp: LDO_REG2 {
+ regulator-name = "vcc3v0_tp";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
};
-&pwm3 {
+&pwm0 {
status = "okay";
};
-&saradc {
+&pwm2 {
status = "okay";
};
-&sdmmc {
- bus-width = <4>;
+&pwm3 {
status = "okay";
};
@@ -164,115 +405,76 @@
status = "okay";
};
-&uart2 {
- status = "okay";
+&pcie_phy {
+ status = "disabled";
};
-&usb_host0_ehci {
- status = "okay";
+&pcie0 {
+ ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ status = "disabled";
};
-&usb_host0_ohci {
+&u2phy0 {
status = "okay";
};
-&usbdrd3_0 {
- vbus-supply = <&vcc5v0_typec0>;
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host>;
status = "okay";
};
-&usb_host1_ehci {
+&u2phy1 {
status = "okay";
};
-&usb_host1_ohci {
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host>;
status = "okay";
};
-&usbdrd3_1 {
- vbus-supply = <&vcc5v0_typec1>;
+&uart2 {
status = "okay";
};
-&i2c0 {
+&usb_host0_ehci {
status = "okay";
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <100>;
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- clock-output-names = "xin32k", "wifibt_32kin";
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- reg = <0x1b>;
- rockchip,system-power-controller;
- #clock-cells = <1>;
- status = "okay";
+};
- vcc12-supply = <&vcc3v3_sys>;
+&usb_host0_ohci {
+ status = "okay";
+};
- regulators {
- vcc33_lcd: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lcd";
- };
- };
- };
+&usb_host1_ehci {
+ status = "okay";
};
-&mipi_dsi {
- status = "disabled";
- rockchip,panel = <&panel>;
- display-timings {
- timing0 {
- bits-per-pixel = <24>;
- clock-frequency = <160000000>;
- hfront-porch = <120>;
- hsync-len = <20>;
- hback-porch = <21>;
- hactive = <1200>;
- vfront-porch = <21>;
- vsync-len = <3>;
- vback-porch = <18>;
- vactive = <1920>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
+&usb_host1_ohci {
+ status = "okay";
};
&pinctrl {
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
+ };
- pmic_dvs2: pmic-dvs2 {
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
- <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
-&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts
index 6b059bd..ebe2ee7 100644
--- a/arch/arm/dts/rk3399-ficus.dts
+++ b/arch/arm/dts/rk3399-ficus.dts
@@ -146,6 +146,12 @@
};
};
+&spi1 {
+ /* On both Low speed and High speed expansion */
+ cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
+ status = "okay";
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index 89c67fd..d63faf3 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -1,19 +1,20 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
/ {
model = "Firefly-RK3399 Board";
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
chosen {
- stdout-path = &uart2;
+ stdout-path = "serial2:1500000n8";
};
backlight: backlight {
@@ -63,6 +64,48 @@
#clock-cells = <0>;
};
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
rt5640-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rockchip,rt5640-codec";
@@ -102,15 +145,27 @@
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&pcie_drv>;
+ pinctrl-0 = <&pcie_pwr_en>;
regulator-name = "vcc3v3_pcie";
regulator-always-on;
regulator-boot-on;
+ vin-supply = <&dc_12v>;
};
vcc3v3_sys: vcc3v3-sys {
@@ -120,34 +175,31 @@
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
};
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
+ pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
regulator-always-on;
+ vin-supply = <&vcc_sys>;
};
- vcc5v0_sys: vcc5v0-sys {
+ vcc_sys: vcc-sys {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
+ regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
};
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
@@ -156,16 +208,7 @@
regulator-boot-on;
regulator-min-microvolt = <430000>;
regulator-max-microvolt = <1400000>;
- regulator-init-microvolt = <950000>;
- };
-
- vccadc_ref: vccadc-ref {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_sys>;
};
};
@@ -201,18 +244,25 @@
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
clock_in_out = "input";
- phy-supply = <&vcc_phy>;
+ phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x33>;
- rx_delay = <0x45>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
@@ -231,16 +281,16 @@
rockchip,system-power-controller;
wakeup-source;
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc1v8_pmu>;
@@ -301,12 +351,12 @@
};
};
- vcc3v0_tp: LDO_REG2 {
- regulator-name = "vcc3v0_tp";
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -324,8 +374,8 @@
};
};
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
@@ -382,7 +432,7 @@
};
};
- vcc3v3_s3: SWITCH_REG1 {
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
@@ -412,7 +462,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -429,7 +479,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -476,19 +526,16 @@
&i2s0 {
rockchip,playback-channels = <8>;
rockchip,capture-channels = <8>;
- #sound-dai-cells = <0>;
status = "okay";
};
&i2s1 {
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
- #sound-dai-cells = <0>;
status = "okay";
};
&i2s2 {
- #sound-dai-cells = <0>;
status = "okay";
};
@@ -497,7 +544,7 @@
bt656-supply = <&vcc1v8_dvp>;
audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vcc_sd>;
+ sdmmc-supply = <&vcc_sdio>;
gpio1830-supply = <&vcc_3v0>;
};
@@ -509,7 +556,7 @@
ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn>;
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
status = "okay";
};
@@ -532,7 +579,7 @@
};
pcie {
- pcie_drv: pcie-drv {
+ pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -570,10 +617,26 @@
};
usb2 {
- host_vbus_drv: host-vbus-drv {
+ vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pwm0 {
@@ -585,24 +648,70 @@
};
&saradc {
- vref-supply = <&vccadc_ref>;
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdio0 {
+ /* WiFi & BT combo module Ampak AP6356S */
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+
+ /* Power supply */
+ vqmmc-supply = &vcc1v8_s3; /* IO line */
+ vmmc-supply = &vcc_sdio; /* card's power */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ brcm,drive-strength = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
};
&sdmmc {
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
status = "okay";
};
&sdhci {
bus-width = <8>;
- keep-power-in-suspend;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
&tsadc {
/* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-mode = <1>;
@@ -662,3 +771,37 @@
&usb_host1_ohci {
status = "okay";
};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts
index 1ee0dc0..e6c1c94 100644
--- a/arch/arm/dts/rk3399-gru-bob.dts
+++ b/arch/arm/dts/rk3399-gru-bob.dts
@@ -18,11 +18,11 @@
"google,bob", "google,gru", "rockchip,rk3399";
edp_panel: edp-panel {
- compatible = "boe,nv101wxmn51", "simple-panel";
+ compatible = "boe,nv101wxmn51";
backlight = <&backlight>;
power-supply = <&pp3300_disp>;
- ports {
+ port {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
};
@@ -68,12 +68,22 @@
&spi0 {
status = "okay";
+
+ cr50@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&h1_int_od_l>;
+ spi-max-frequency = <800000>;
+ };
};
&pinctrl {
tpm {
h1_int_od_l: h1-int-od-l {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi
index c6495ad..1384dab 100644
--- a/arch/arm/dts/rk3399-gru-chromebook.dtsi
+++ b/arch/arm/dts/rk3399-gru-chromebook.dtsi
@@ -194,20 +194,25 @@
backlight: backlight {
compatible = "pwm-backlight";
- brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- 17 18 19 20 21 22 23 24 25 26 27 28 29 30
- 31 32 33 34 35 36 37 38 39 40 41 42 43 44
- 45 46 47 48 49 50 51 52 53 54 55 56 57 58
- 59 60 61 62 63 64 65 66 67 68 69 70 71 72
- 73 74 75 76 77 78 79 80 81 82 83 84 85 86
- 87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
- default-brightness-level = <51>;
enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
power-supply = <&pp3300_disp>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwm-delay-us = <10000>;
};
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>;
+
+ wake_on_bt: wake-on-bt {
+ label = "Wake-on-Bluetooth";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
};
&ppvar_bigcpu {
@@ -232,7 +237,6 @@
&edp {
status = "okay";
- rockchip,panel = <&edp_panel>;
ports {
edp_out: port@1 {
reg = <1>;
@@ -287,11 +291,9 @@
#pwm-cells = <1>;
};
- usbc_extcon1: extcon@1 {
+ usbc_extcon1: extcon1 {
compatible = "google,extcon-usbc-cros-ec";
google,usb-port-id = <1>;
-
- #extcon-cells = <0>;
};
};
@@ -361,27 +363,27 @@
&pinctrl {
discrete-regulators {
pp1500_en: pp1500-en {
- rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
&pcfg_pull_none>;
};
pp1800_audio_en: pp1800-audio-en {
- rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
&pcfg_pull_down>;
};
pp3000_en: pp3000-en {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
&pcfg_pull_none>;
};
pp3300_disp_en: pp3300-disp-en {
- rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
+ rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
&pcfg_pull_none>;
};
wlan_module_pd_l: wlan-module-pd-l {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
&pcfg_pull_down>;
};
};
@@ -389,10 +391,10 @@
&wifi {
wifi_perst_l: wifi-perst-l {
- rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_host_wake_l: wlan-host-wake-l {
- rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/arch/arm/dts/rk3399-gru-kevin.dts b/arch/arm/dts/rk3399-gru-kevin.dts
index 2cc7c47..2bbef9f 100644
--- a/arch/arm/dts/rk3399-gru-kevin.dts
+++ b/arch/arm/dts/rk3399-gru-kevin.dts
@@ -39,11 +39,25 @@
};
edp_panel: edp-panel {
- compatible = "sharp,lq123p1jx31", "simple-panel";
+ compatible = "sharp,lq123p1jx31";
backlight = <&backlight>;
power-supply = <&pp3300_disp>;
- ports {
+ panel-timing {
+ clock-frequency = <266666667>;
+ hactive = <2400>;
+ hfront-porch = <48>;
+ hback-porch = <84>;
+ hsync-len = <32>;
+ hsync-active = <0>;
+ vactive = <1600>;
+ vfront-porch = <3>;
+ vback-porch = <120>;
+ vsync-len = <10>;
+ vsync-active = <0>;
+ };
+
+ port {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
};
@@ -118,13 +132,17 @@
map0 {
trip = <&ppvar_bigcpu_alert>;
cooling-device =
- <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
map1 {
trip = <&ppvar_bigcpu_alert>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <1024>;
};
};
@@ -286,24 +304,24 @@
digitizer {
/* Has external pullup */
cpu1_dig_irq_l: cpu1-dig-irq-l {
- rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
/* Has external pullup */
cpu1_dig_pdct_l: cpu1-dig-pdct-l {
- rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
discrete-regulators {
cpu3_pen_pwr_en: cpu3-pen-pwr-en {
- rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pen {
cpu1_pen_eject: cpu1-pen-eject {
- rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
index 0e2e047..7ac8839 100644
--- a/arch/arm/dts/rk3399-gru.dtsi
+++ b/arch/arm/dts/rk3399-gru.dtsi
@@ -11,15 +11,9 @@
/ {
chosen {
- u-boot,dm-pre-reloc;
stdout-path = "serial2:115200n8";
- u-boot,spl-boot-order = &spi_flash;
};
- config {
- u-boot,spl-payload-offset = <0x40000>;
- };
-
/*
* Power Tree
*
@@ -268,17 +262,11 @@
pp5000_usb_a_vbus: pp5000 {
};
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l>;
-
- wake_on_bt: wake-on-bt {
- label = "Wake-on-Bluetooth";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WAKEUP>;
- wakeup-source;
- };
+ ap_rtc_clk: ap-rtc-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
};
max98357a: max98357a {
@@ -549,8 +537,7 @@
pinctrl-names = "default", "sleep";
pinctrl-1 = <&spi1_sleep>;
- spi_flash: spiflash@0 {
- u-boot,dm-pre-reloc;
+ spiflash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
@@ -565,16 +552,12 @@
&spi5 {
status = "okay";
- spi-activate-delay = <100>;
- spi-max-frequency = <3000000>;
- spi-deactivate-delay = <200>;
cros_ec: ec@0 {
compatible = "google,cros-ec-spi";
reg = <0>;
interrupt-parent = <&gpio0>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
- ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ec_ap_int_l>;
spi-max-frequency = <3000000>;
@@ -586,11 +569,9 @@
#size-cells = <0>;
};
- usbc_extcon0: extcon@0 {
+ usbc_extcon0: extcon0 {
compatible = "google,extcon-usbc-cros-ec";
google,usb-port-id = <0>;
-
- #extcon-cells = <0>;
};
};
};
@@ -692,29 +673,29 @@
backlight-enable {
bl_en: bl-en {
- rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
cros-ec {
ec_ap_int_l: ec-ap-int-l {
- rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
discrete-regulators {
sd_io_pwr_en: sd-io-pwr-en {
- rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
&pcfg_pull_none>;
};
sd_pwr_1800_sel: sd-pwr-1800-sel {
- rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
&pcfg_pull_none>;
};
sd_slot_pwr_en: sd-slot-pwr-en {
- rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
&pcfg_pull_none>;
};
};
@@ -722,17 +703,17 @@
codec {
/* Has external pullup */
headset_int_l: headset-int-l {
- rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
mic_int: mic-int {
- rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
max98357a {
sdmode_en: sdmode-en {
- rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
@@ -743,7 +724,7 @@
* to hack this as gpio, so the EP could be able to
* de-assert it along and make ClockPM(CPM) work.
*/
- rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -754,20 +735,20 @@
*/
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ <4 RK_PB0 1 &pcfg_pull_none_8ma>,
+ <4 RK_PB1 1 &pcfg_pull_none_8ma>,
+ <4 RK_PB2 1 &pcfg_pull_none_8ma>,
+ <4 RK_PB3 1 &pcfg_pull_none_8ma>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ <4 RK_PB4 1 &pcfg_pull_none_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>;
+ <4 RK_PB5 1 &pcfg_pull_none_8ma>;
};
/*
@@ -781,12 +762,12 @@
*/
sdmmc_cd: sdmmc-cd {
rockchip,pins =
- <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ <0 RK_PA7 1 &pcfg_pull_none>;
};
/* This is where we actually hook up CD; has external pull */
sdmmc_cd_gpio: sdmmc-cd-gpio {
- rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -796,47 +777,47 @@
* Pull down SPI1 CLK/CS/RX/TX during suspend, to
* prevent leakage.
*/
- rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 10 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 7 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 8 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
touchscreen {
touch_int_l: touch-int-l {
- rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
};
touch_reset_l: touch-reset-l {
- rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
trackpad {
ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
- rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>;
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
};
trackpad_int_l: trackpad-int-l {
- rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
wifi: wifi {
wlan_module_reset_l: wlan-module-reset-l {
- rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_l: bt-host-wake-l {
/* Kevin has an external pull up, but Gru does not */
- rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
write-protect {
ap_fw_wp: ap-fw-wp {
- rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi
index 4944d78..e87a044 100644
--- a/arch/arm/dts/rk3399-khadas-edge.dtsi
+++ b/arch/arm/dts/rk3399-khadas-edge.dtsi
@@ -654,9 +654,12 @@
sd-uhs-sdr104;
vqmmc-supply = <&vcc1v8_s3>;
vmmc-supply = <&vccio_sd>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts
index 32baa57..73be38a 100644
--- a/arch/arm/dts/rk3399-leez-p710.dts
+++ b/arch/arm/dts/rk3399-leez-p710.dts
@@ -42,14 +42,14 @@
regulator-max-microvolt = <5000000>;
};
- vcc5v0_sys: vcc5v0-sys {
+ vcc3v3_lan: vcc3v3-lan {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
+ regulator-name = "vcc3v3_lan";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc5v_adp>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vim-supply = <&vcc3v3_sys>;
};
vcc3v3_sys: vcc3v3-sys {
@@ -83,14 +83,14 @@
vin-supply = <&vcc5v0_sys>;
};
- vcc3v3_lan: vcc3v3-lan {
+ vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
- regulator-name = "vcc3v3_lan";
+ regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vim-supply = <&vcc3v3_sys>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc5v_adp>;
};
vdd_log: vdd-log {
@@ -510,6 +510,14 @@
};
};
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -522,14 +530,6 @@
status = "okay";
};
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
&tcphy0 {
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
index 84433cf..e0d7561 100644
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -52,13 +52,58 @@
pinctrl-names = "default";
pinctrl-0 = <&ir_rx>;
};
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ /*
+ * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+ * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+ */
+ cooling-levels = <0 12 18 255>;
+ #cooling-cells = <2>;
+ fan-supply = <&vcc12v0_sys>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+};
+
+&cpu_thermal {
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map3 {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&pcie0 {
+ num-lanes = <4>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
};
&pinctrl {
ir {
ir_rx: ir-rx {
/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
- rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
};
};
};
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index d325e11..c88018a 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -48,7 +48,7 @@
};
/* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ vcc1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
@@ -71,6 +71,27 @@
vin-supply = <&vcc3v3_sys>;
};
+ /*
+ * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+ * drives the enable pin, but we can't quite model that.
+ */
+ vcca0v9_s3: vcca0v9-s3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca0v9_s3";
+ vin-supply = <&vcc1v8_s3>;
+ };
+
+ /* As above, actually supplied by vcc3v3_sys */
+ vcca1v8_s3: vcca1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_s3";
+ vin-supply = <&vcc1v8_s3>;
+ };
+
vbus_typec: vbus-typec {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
@@ -148,15 +169,28 @@
assigned-clocks = <&cru SCLK_RMII_SRC>;
clock_in_out = "input";
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
+ pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+ phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
phy-supply = <&vcc3v3_s3>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpu {
@@ -171,6 +205,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <160>;
@@ -446,6 +484,10 @@
status = "okay";
};
+&i2s2 {
+ status = "okay";
+};
+
&io_domains {
bt656-supply = <&vcc_1v8>;
audio-supply = <&vcca1v8_codec>;
@@ -464,7 +506,9 @@
&pcie0 {
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
max-link-speed = <2>;
- num-lanes = <4>;
+ num-lanes = <2>;
+ vpcie0v9-supply = <&vcca0v9_s3>;
+ vpcie1v8-supply = <&vcca1v8_s3>;
status = "okay";
};
@@ -481,6 +525,16 @@
};
};
+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
cpu_b_sleep: cpu-b-sleep {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
index cf37b96..f9f7246 100644
--- a/arch/arm/dts/rk3399-orangepi.dts
+++ b/arch/arm/dts/rk3399-orangepi.dts
@@ -136,13 +136,13 @@
vin-supply = <&vcc_sys>;
};
- vcc5v0_typec0: vcc5v0-typec0-regulator {
+ vbus_typec: vbus-typec-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec0_en>;
- regulator-name = "vcc5v0_typec0";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vbus_typec";
vin-supply = <&vcc_sys>;
};
@@ -202,14 +202,27 @@
clock_in_out = "input";
phy-supply = <&vcc3v3_s3>;
phy-mode = "rgmii";
+ phy-handle = <&rtl8211e>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
+ pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpu {
@@ -419,6 +432,8 @@
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu_b_sleep>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -436,6 +451,8 @@
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpu_sleep>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -472,6 +489,7 @@
compatible = "asahi-kasei,ak09911";
reg = <0x0c>;
vdd-supply = <&vcc3v3_s3>;
+ vid-supply = <&vcc3v3_s3>;
};
mpu6500@68 {
@@ -504,6 +522,16 @@
pinctrl-0 = <&light_int_l>;
vdd-supply = <&vcc3v3_s3>;
};
+
+ fusb302@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&chg_cc_int_l>;
+ vbus-supply = <&vbus_typec>;
+ };
};
&io_domains {
@@ -526,7 +554,25 @@
};
};
+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
+ cpu_b_sleep: cpu-b-sleep {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ gpu_sleep: gpu-sleep {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
pmic_int_l: pmic-int-l {
rockchip,pins =
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -536,7 +582,7 @@
sd {
sdmmc0_pwr_h: sdmmc0-pwr-h {
rockchip,pins =
- <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -546,7 +592,7 @@
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- vcc5v0_typec0_en: vcc5v0-typec0-en {
+ vcc5v0_typec_en: vcc5v0-typec-en {
rockchip,pins =
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -595,6 +641,12 @@
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ fusb302 {
+ chg_cc_int_l: chg-cc-int-l {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&pwm0 {
@@ -631,9 +683,12 @@
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -676,7 +731,7 @@
status = "okay";
u2phy0_otg: otg-port {
- phy-supply = <&vcc5v0_typec0>;
+ phy-supply = <&vbus_typec>;
status = "okay";
};
@@ -707,12 +762,14 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk808 1>;
- clock-names = "ext_clock";
+ clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
};
};
diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi
index e664779..3ad1139 100644
--- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
@@ -13,7 +13,7 @@
chosen {
stdout-path = "serial0:115200n8";
u-boot,spl-boot-order = \
- "same-as-spl", &spiflash, &sdhci, &sdmmc;
+ "same-as-spl", &norflash, &sdhci, &sdmmc;
};
aliases {
@@ -21,12 +21,25 @@
spi1 = &spi5;
};
+ /*
+ * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+ * eMMC and SPI flash powered-down initially (in fact it keeps the
+ * reset signal asserted). Even though it is an enable signal, we
+ * model this as a regulator.
+ */
+ bios_enable: bios_enable {
+ compatible = "regulator-fixed";
+ u-boot,dm-pre-reloc;
+ regulator-name = "bios_enable";
+ enable-active-high;
+ gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
-&bios_enable {
- u-boot,dm-pre-reloc;
-};
-
&gpio1 {
u-boot,dm-pre-reloc;
};
@@ -35,6 +48,6 @@
u-boot,dm-pre-reloc;
};
-&spiflash {
+&norflash {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 246a892..07694b1 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -1,112 +1,92 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
*/
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
/ {
- model = "Theobroma Systems RK3399-Q7 SoM";
- compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&leds_pins_puma>;
+ pinctrl-0 = <&led_pin_module>;
- module_led {
+ module-led {
label = "module_led";
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
- };
-
- sd_card_led {
- label = "sd_card_led";
- gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
+ panic-indicator;
};
};
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- dw_hdmi_audio: dw-hdmi-audio {
- status = "enabled";
- compatible = "rockchip,dw-hdmi-audio";
- #sound-dai-cells = <0>;
- };
-
- hdmi_codec: hdmi-codec {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "HDMI-CODEC";
+ /*
+ * Overwrite the opp-table for CPUB as this board uses a different
+ * regulator (FAN53555) that only allows 10mV steps and therefore
+ * can't reach the operation point target voltages from rk3399-opp.dtsi
+ */
+ /delete-node/ opp-table1;
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
- simple-audio-card,cpu {
- sound-dai = <&i2s2>;
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
};
-
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
};
- };
-
- hdmi_sound: hdmi-sound {
- status = "disabled";
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "rockchip,hdmi";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s2>;
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <830000>;
+ opp-suspend;
};
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <880000>;
};
- };
-
- usbhub_enable: usbhub_enable {
- compatible = "regulator-fixed";
- regulator-name = "usbhub_enable";
- enable-active-low;
- gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1030000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1200000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <1992000000>;
+ opp-microvolt = <1230000>;
+ turbo-mode;
+ };
};
- /*
- * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
- * eMMC and SPI flash powered-down initially (in fact it keeps the
- * reset signal asserted). Even though it is an enable signal, we
- * model this as a regulator.
- */
- bios_enable: bios_enable {
- compatible = "regulator-fixed";
- regulator-name = "bios_enable";
- enable-active-high;
- gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
};
- vccadc_ref: vccadc-ref {
+ vcc1v2_phy: vcc1v2-phy {
compatible = "regulator-fixed";
- regulator-name = "vcc1v8_sys";
+ regulator-name = "vcc1v2_phy";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vcc5v0_sys>;
};
vcc3v3_sys: vcc3v3-sys {
@@ -116,16 +96,18 @@
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
};
- vcc5v0_otg: vcc5v0-otg-regulator {
+ vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ enable-active-low;
pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc5v0_otg";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys {
@@ -136,48 +118,55 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+};
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-init-microvolt = <950000>;
- };
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
};
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
&emmc_phy {
status = "okay";
+ drive-impedance-ohm = <33>;
};
&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <2 10000 50000>;
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc1v2_phy>;
+ phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x10>;
rx_delay = <0x10>;
status = "okay";
};
-&hdmi {
- #sound-dai-cells = <0>;
+&gpu {
+ mali-supply = <&vdd_gpu>;
status = "okay";
};
@@ -187,37 +176,17 @@
i2c-scl-falling-time-ns = <4>;
clock-frequency = <400000>;
- vdd_gpu: vdd_gpu {
- status = "okay";
- compatible = "fcs,fan53555";
- reg = <0x60>;
- vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vcc5v0_sys>;
- regulator-compatible = "fan53555-reg";
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1230000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- regulator-initial-state = <3>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio1>;
- interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt?
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
@@ -234,44 +203,44 @@
regulators {
vdd_center: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vdd_center";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
- regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vdd_cpu_l";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
- regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -279,32 +248,32 @@
};
vcc_ldo1: LDO_REG1 {
- regulator-boot-on;
+ regulator-name = "vcc_ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_ldo1";
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_hdmi: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc1v8_hdmi";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_pmu: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc1v8_pmu";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -312,11 +281,11 @@
};
vcc_sd: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
- regulator-name = "vcc_sd";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
@@ -324,79 +293,105 @@
};
vcc_ldo5: LDO_REG5 {
- regulator-boot-on;
+ regulator-name = "vcc_ldo5";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-name = "vcc_ldo5";
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ldo6: LDO_REG6 {
- regulator-boot-on;
+ regulator-name = "vcc_ldo6";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- regulator-name = "vcc_ldo6";
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc0v9_hdmi: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc0v9_hdmi";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
- regulator-name = "vcc0v9_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_efuse: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_efuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_efuse";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc3v3_s3";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
+
+ vdd_gpu: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1230000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ fan: fan@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ #cooling-cells = <2>;
+ };
+
+ rtc_twi: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
};
&i2c8 {
status = "okay";
clock-frequency = <400000>;
- vdd_cpu_b: vdd_cpu_b {
- status = "okay";
+ vdd_cpu_b: regulator@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
- vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_sys>;
- regulator-compatible = "fan53555-reg";
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1230000>;
@@ -404,234 +399,136 @@
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
- regulator-initial-state = <3>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
};
};
&i2s0 {
+ pinctrl-0 = <&i2s0_2ch_bus>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "okay";
- rockchip,i2s-broken-burst-len;
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- #sound-dai-cells = <0>;
};
-&i2s2 {
- #sound-dai-cells = <0>;
- status = "okay";
+/*
+ * As Q7 does not specify neither a global nor a RX clock for I2S these
+ * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
+ * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
+ * conflicts.
+ */
+&i2s0_2ch_bus {
+ rockchip,pins =
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>;
};
&io_domains {
status = "okay";
-
- bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
- audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */
- sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
- gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */
+ bt656-supply = <&vcc_1v8>;
+ audio-supply = <&vcc_1v8>;
+ sdmmc-supply = <&vcc_sd>;
+ gpio1830-supply = <&vcc_1v8>;
};
-&pcie0 {
- assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
- assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
- assigned-clock-rates = <100000000>;
- ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
&pmu_io_domains {
status = "okay";
pmu1830-supply = <&vcc_1v8>;
};
-&pwm0 {
- status = "okay";
-};
-
&pwm2 {
status = "okay";
};
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- supports-emmc;
- non-removable;
- keep-power-in-suspend;
- mmc-hs400-enhanced-strobe;
- status = "okay";
-};
-
-&sdmmc {
- clock-frequency = <150000000>;
- max-frequency = <40000000>;
- supports-sd;
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- num-slots = <1>;
- vqmmc-supply = <&vcc_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "disabled";
-};
-
-&usb_host0_ohci {
- status = "disabled";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "disabled";
-};
-
-&usb_host1_ohci {
- status = "disabled";
-};
-
-&usbdrd3_1 {
- status = "okay";
- tsd,usb-port-power = "usbhub_enable";
-};
-
-&vopb {
- status = "okay";
-};
-
&pinctrl {
- /* Pins that are not explicitely used by any devices */
- pinctrl-names = "default";
- pinctrl-0 = <&puma_pin_hog>;
-
- hog {
- puma_pin_hog: puma_pin_hog {
+ i2c8 {
+ i2c8_xfer_a: i2c8-xfer {
rockchip,pins =
- /* We need pull-ups on Q7 buttons */
- <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
- <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
- <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
- <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
+ <1 RK_PC4 1 &pcfg_pull_up>,
+ <1 RK_PC5 1 &pcfg_pull_up>;
};
};
- pmic {
- pmic_int_l: pmic-int-l {
+ leds {
+ led_pin_module: led-module-gpio {
rockchip,pins =
- <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
- leds_pins_puma: led_pins@0 {
- rockchip,pins =
- <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
- <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- usb2 {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins =
- <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- host_vbus_drv: host-vbus-drv {
+ pmic {
+ pmic_int_l: pmic-int-l {
rockchip,pins =
- <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
- i2c8 {
- i2c8_xfer_a: i2c8-xfer {
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
- <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
-&i2c1 {
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
status = "okay";
- clock-frequency = <400000>;
};
-&i2c2 {
- status = "okay";
- clock-frequency = <400000>;
+
+&sdmmc {
+ vqmmc-supply = <&vcc_sd>;
};
-&i2c4 {
+
+&spi1 {
status = "okay";
- clock-frequency = <400000>;
+
+ norflash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
};
-&i2c6 {
+
+&tcphy1 {
status = "okay";
- clock-frequency = <400000>;
};
-&i2c6_xfer {
- /* Enable pull-ups, the pins would float otherwise. */
- rockchip,pins =
- <RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>,
- <RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>;
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
};
-&i2c7 {
+&u2phy1 {
status = "okay";
- clock-frequency = <400000>;
- rtc_twi: rtc@6f {
- compatible = "isil,isl1208";
- reg = <0x6f>;
+ u2phy1_otg: otg-port {
+ status = "okay";
};
- fan: fan@18 {
- compatible = "ti,amc6821";
- reg = <0x18>;
- cooling-min-state = <0>;
- cooling-max-state = <9>;
- #cooling-cells = <2>;
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
};
};
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
+&usbdrd3_1 {
status = "okay";
};
-
-&spi1 {
+&usbdrd_dwc3_1 {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
+ dr_mode = "host";
+};
- spiflash: w25q32dw@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <49500000>;
- spi-cpol;
- spi-cpha;
- };
+&usb_host1_ehci {
+ status = "okay";
};
-&spi5 {
+&usb_host1_ohci {
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
index 598e0e2..141dd0b 100644
--- a/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
@@ -26,7 +26,33 @@
};
};
+/*
+ * should be placed inside mp8859, but not until mp8859 has
+ * its own dt-binding.
+ */
+&dc_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc_vbus_typec0>;
+};
+
&vdd_log {
regulator-min-microvolt = <430000>;
regulator-init-microvolt = <950000>;
};
+
+&vcc5v0_host {
+ regulator-always-on;
+};
+
+&vcc_sys {
+ regulator-always-on;
+};
+
+&vcc_sdio {
+ regulator-always-on;
+};
diff --git a/arch/arm/dts/rk3399-roc-pc.dts b/arch/arm/dts/rk3399-roc-pc.dts
index 6a909e4..cd41954 100644
--- a/arch/arm/dts/rk3399-roc-pc.dts
+++ b/arch/arm/dts/rk3399-roc-pc.dts
@@ -8,6 +8,5 @@
/ {
model = "Firefly ROC-RK3399-PC Board";
- compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc",
- "rockchip,rk3399";
+ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
};
diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi
index 9a1ce3a..9f225e9 100644
--- a/arch/arm/dts/rk3399-roc-pc.dtsi
+++ b/arch/arm/dts/rk3399-roc-pc.dtsi
@@ -110,20 +110,6 @@
regulator-max-microvolt = <5000000>;
};
- /*
- * should be placed inside mp8859, but not until mp8859 has
- * its own dt-binding.
- */
- dc_12v: mp8859-dcdc1 {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&vcc_vbus_typec0>;
- };
-
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
@@ -176,7 +162,6 @@
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
regulator-name = "vcc5v0_host";
- regulator-always-on;
vin-supply = <&vcc_sys>;
};
@@ -198,7 +183,6 @@
pinctrl-names = "default";
pinctrl-0 = <&vcc_sys_en>;
regulator-name = "vcc_sys";
- regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -392,7 +376,6 @@
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
- regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
@@ -549,6 +532,24 @@
vbus-supply = <&vcc_vbus_typec0>;
status = "okay";
};
+
+ mp8859: regulator@66 {
+ compatible = "mps,mp8859";
+ reg = <0x66>;
+ dc_12v: mp8859_dcdc {
+ regulator-name = "dc_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_vbus_typec0>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <12000000>;
+ };
+ };
+ };
};
&i2s0 {
diff --git a/arch/arm/dts/rk3399-rock-pi-4.dts b/arch/arm/dts/rk3399-rock-pi-4.dts
index 4a543f2..3923ec0 100644
--- a/arch/arm/dts/rk3399-rock-pi-4.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4.dts
@@ -25,6 +25,15 @@
#clock-cells = <0>;
};
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
vcc12v_dcin: dc-12v {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -44,6 +53,16 @@
vin-supply = <&vcc12v_dcin>;
};
+ vcc_0v9: vcc-0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -157,12 +176,22 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&hdmi {
+ ddc-i2c-bus = <&i2c3>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec>;
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
@@ -444,13 +473,60 @@
pmu1830-supply = <&vcc_3v0>;
};
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+ max-link-speed = <2>;
+ num-lanes = <4>;
+ pinctrl-0 = <&pcie_clkreqnb_cpm>;
+ pinctrl-names = "default";
+ vpcie0v9-supply = <&vcc_0v9>;
+ vpcie1v8-supply = <&vcc_1v8>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ sdio0 {
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
+ <2 RK_PC5 1 &pcfg_pull_up_20ma>,
+ <2 RK_PC6 1 &pcfg_pull_up_20ma>,
+ <2 RK_PC7 1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -476,6 +552,16 @@
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pwm2 {
@@ -488,6 +574,32 @@
vref-supply = <&vcc_1v8>;
};
+&sdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -551,6 +663,23 @@
};
};
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ };
+};
+
&uart2 {
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts
index 12285c5..437a75f 100644
--- a/arch/arm/dts/rk3399-rock960.dts
+++ b/arch/arm/dts/rk3399-rock960.dts
@@ -114,6 +114,55 @@
};
};
+&spi0 {
+ /* On Low speed expansion (LS-SPI0) */
+ status = "okay";
+};
+
+&spi4 {
+ /* On High speed expansion (HS-SPI1) */
+ status = "okay";
+};
+
+&thermal_zones {
+ cpu_thermal: cpu {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 0>;
+ sustainable-power = <1550>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
&usbdrd_dwc3_0 {
dr_mode = "otg";
};
diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi
index c7d48d4..ba7c75c 100644
--- a/arch/arm/dts/rk3399-rock960.dtsi
+++ b/arch/arm/dts/rk3399-rock960.dtsi
@@ -76,6 +76,15 @@
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
+
+ vcc_0v9: vcc-0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_0v9";
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
};
&cpu_l0 {
@@ -384,6 +393,8 @@
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
+ vpcie0v9-supply = <&vcc_0v9>;
+ vpcie1v8-supply = <&vcca_1v8>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
@@ -531,7 +542,7 @@
cap-mmc-highspeed;
cap-sd-highspeed;
clock-frequency = <100000000>;
- clock-freq-min-max = <100000 100000000>;
+ max-frequency = <100000000>;
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
disable-wp;
sd-uhs-sdr104;
diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
index e544deb..4b42717 100644
--- a/arch/arm/dts/rk3399-rockpro64.dts
+++ b/arch/arm/dts/rk3399-rockpro64.dts
@@ -2,752 +2,29 @@
/*
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
*/
/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rockpro64.dtsi"
/ {
- model = "Pine64 RockPro64";
- compatible = "pine64,rockpro64", "rockchip,rk3399";
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
-
- work-led {
- label = "work";
- default-state = "on";
- gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
- };
-
- diy-led {
- label = "diy";
- default-state = "off";
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- #cooling-cells = <2>;
- fan-supply = <&vcc12v_dcin>;
- pwms = <&pwm1 0 50000 0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- vcc12v_dcin: vcc12v-dcin {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwr_en>;
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc5v0_usb>;
- };
-
- vcc5v0_typec: vcc5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vcc5v0_typec";
- regulator-always-on;
- vin-supply = <&vcc5v0_usb>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc5v0_usb: vcc5v0-usb {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1700000>;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio3>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcca_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_touch: LDO_REG2 {
- regulator-name = "vcc3v0_touch";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
+ model = "Pine64 RockPro64 v2.1";
+ compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
};
&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
+ es8316: codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc5v0_typec>;
- status = "okay";
- };
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-&pcie0 {
- ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_perst>;
- vpcie12v-supply = <&vcc12v_dcin>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- fusb302x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- work_led_gpio: work_led-gpio {
- rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- diy_led_gpio: diy_led-gpio {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_perst: pcie-perst {
- rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- vcc5v0_typec_en: vcc5v0_typec_en {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s1_p0_0>;
+ };
};
};
};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "otg";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi
new file mode 100644
index 0000000..9bca258
--- /dev/null
+++ b/arch/arm/dts/rk3399-rockpro64.dtsi
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ fan-supply = <&vcc12v_dcin>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3399";
+ dais = <&i2s1_p0>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1700000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+
+ i2s1_p0: port {
+ i2s1_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_perst>;
+ vpcie12v-supply = <&vcc12v_dcin>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_perst: pcie-perst {
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index 757b8c1..9bb130a 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -85,6 +85,7 @@
};
&sdhci {
+ max-frequency = <200000000>;
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index 6b7c136..74f2c3d 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
*/
#include <dt-bindings/clock/rk3399-cru.h>
@@ -19,6 +19,7 @@
#size-cells = <2>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -67,55 +68,104 @@
cpu_l0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
- #cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l2: cpu@2 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l3: cpu@3 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
+ capacity-dmips-mhz = <485>;
clocks = <&cru ARMCLKL>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b0: cpu@100 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x0 0x100>;
enable-method = "psci";
- #cooling-cells = <2>; /* min followed by max */
+ capacity-dmips-mhz = <1024>;
clocks = <&cru ARMCLKB>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b1: cpu@101 {
device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
+ compatible = "arm,cortex-a72";
reg = <0x0 0x101>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
clocks = <&cru ARMCLKB>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
+
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
@@ -147,7 +197,7 @@
#clock-cells = <0>;
};
- amba {
+ amba: bus {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -183,7 +233,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
aspm-no-l0s;
- bus-range = <0x0 0x1>;
+ bus-range = <0x0 0x1f>;
clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
<&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
clock-names = "aclk", "aclk-perf",
@@ -200,10 +250,12 @@
linux,pci-domain = <0>;
max-link-speed = <1>;
msi-map = <0x0 &its 0x0 0x1000>;
- phys = <&pcie_phy>;
- phy-names = "pcie-phy";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
- 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+ phys = <&pcie_phy 0>, <&pcie_phy 1>,
+ <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1",
+ "pcie-phy-2", "pcie-phy-3";
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
+ 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
@@ -236,10 +288,11 @@
resets = <&cru SRST_A_GMAC>;
reset-names = "stmmaceth";
rockchip,grf = <&grf>;
+ snps,txpbl = <0x4>;
status = "disabled";
};
- sdio0: dwmmc@fe310000 {
+ sdio0: mmc@fe310000 {
compatible = "rockchip,rk3399-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe310000 0x0 0x4000>;
@@ -255,12 +308,14 @@
status = "disabled";
};
- sdmmc: dwmmc@fe320000 {
+ sdmmc: mmc@fe320000 {
compatible = "rockchip,rk3399-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe320000 0x0 0x4000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
max-frequency = <150000000>;
+ assigned-clocks = <&cru HCLK_SD>;
+ assigned-clock-rates = <200000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -278,7 +333,6 @@
arasan,soc-ctl-syscon = <&grf>;
assigned-clocks = <&cru SCLK_EMMC>;
assigned-clock-rates = <200000000>;
- max-frequency = <200000000>;
clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
clock-names = "clk_xin", "clk_ahb";
clock-output-names = "emmc_cardclock";
@@ -286,6 +340,7 @@
phys = <&emmc_phy>;
phy-names = "phy_arasan";
power-domains = <&power RK3399_PD_EMMC>;
+ disable-cqe-dcmd;
status = "disabled";
};
@@ -295,11 +350,8 @@
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
<&u2phy0>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
- power-domains = <&power RK3399_PD_PERIHP>;
status = "disabled";
};
@@ -309,11 +361,8 @@
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
<&u2phy0>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
- power-domains = <&power RK3399_PD_PERIHP>;
status = "disabled";
};
@@ -323,11 +372,8 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
<&u2phy1>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
- power-domains = <&power RK3399_PD_PERIHP>;
status = "disabled";
};
@@ -337,15 +383,12 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
<&u2phy1>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
- power-domains = <&power RK3399_PD_PERIHP>;
status = "disabled";
};
- usbdrd3_0: dwc3_typec0: usb@fe800000 {
+ usbdrd3_0: usb@fe800000 {
compatible = "rockchip,rk3399-dwc3";
#address-cells = <2>;
#size-cells = <2>;
@@ -364,6 +407,9 @@
compatible = "snps,dwc3";
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+ <&cru SCLK_USB3OTG0_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
dr_mode = "otg";
phys = <&u2phy0_otg>, <&tcphy0_usb3>;
phy-names = "usb2-phy", "usb3-phy";
@@ -378,7 +424,7 @@
};
};
- dwc3_typec1: usbdrd3_1: usb@fe900000 {
+ usbdrd3_1: usb@fe900000 {
compatible = "rockchip,rk3399-dwc3";
#address-cells = <2>;
#size-cells = <2>;
@@ -397,6 +443,9 @@
compatible = "snps,dwc3";
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+ <&cru SCLK_USB3OTG1_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
dr_mode = "otg";
phys = <&u2phy1_otg>, <&tcphy1_usb3>;
phy-names = "usb2-phy", "usb3-phy";
@@ -464,6 +513,7 @@
its: interrupt-controller@fee20000 {
compatible = "arm,gic-v3-its";
msi-controller;
+ #msi-cells = <1>;
reg = <0x0 0xfee20000 0x0 0x20000>;
};
@@ -612,7 +662,6 @@
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
- clock-frequency = <24000000>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
@@ -639,6 +688,8 @@
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 10>, <&dmac_peri 11>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
#address-cells = <1>;
@@ -652,6 +703,8 @@
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 12>, <&dmac_peri 13>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
#address-cells = <1>;
@@ -665,6 +718,8 @@
clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 14>, <&dmac_peri 15>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
#address-cells = <1>;
@@ -678,6 +733,8 @@
clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_peri 18>, <&dmac_peri 19>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
#address-cells = <1>;
@@ -691,8 +748,11 @@
clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
clock-names = "spiclk", "apb_pclk";
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dmac_bus 8>, <&dmac_bus 9>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -727,13 +787,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -761,7 +826,7 @@
map0 {
trip = <&gpu_alert0>;
cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -980,22 +1045,11 @@
<&cru PCLK_GMAC>;
pm_qos = <&qos_gmac>;
};
- pd_perihp@RK3399_PD_PERIHP {
- reg = <RK3399_PD_PERIHP>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&cru ACLK_PERIHP>;
- pm_qos = <&qos_perihp>,
- <&qos_pcie>,
- <&qos_usb_host0>,
- <&qos_usb_host1>;
-
- pd_sd@RK3399_PD_SD {
- reg = <RK3399_PD_SD>;
- clocks = <&cru HCLK_SDMMC>,
- <&cru SCLK_SDMMC>;
- pm_qos = <&qos_sd>;
- };
+ pd_sd@RK3399_PD_SD {
+ reg = <RK3399_PD_SD>;
+ clocks = <&cru HCLK_SDMMC>,
+ <&cru SCLK_SDMMC>;
+ pm_qos = <&qos_sd>;
};
pd_sdioaudio@RK3399_PD_SDIOAUDIO {
reg = <RK3399_PD_SDIOAUDIO>;
@@ -1070,6 +1124,8 @@
pmugrf: syscon@ff320000 {
compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff320000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
pmu_io_domains: io-domains {
compatible = "rockchip,rk3399-pmu-io-voltage-domain";
@@ -1192,6 +1248,62 @@
status = "disabled";
};
+ vpu: video-codec@ff650000 {
+ compatible = "rockchip,rk3399-vpu";
+ reg = <0x0 0xff650000 0x0 0x800>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vpu_mmu>;
+ power-domains = <&power RK3399_PD_VCODEC>;
+ };
+
+ vpu_mmu: iommu@ff650800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff650800 0x0 0x40>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_VCODEC>;
+ };
+
+ vdec_mmu: iommu@ff660480 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vdec_mmu";
+ clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ iep_mmu: iommu@ff670800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff670800 0x0 0x40>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "iep_mmu";
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ rga: rga@ff680000 {
+ compatible = "rockchip,rk3399-rga";
+ reg = <0x0 0xff680000 0x0 0x10000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+ clock-names = "aclk", "hclk", "sclk";
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+ reset-names = "core", "axi", "ahb";
+ power-domains = <&power RK3399_PD_RGA>;
+ };
+
efuse0: efuse@ff690000 {
compatible = "rockchip,rk3399-efuse";
reg = <0x0 0xff690000 0x0 0x80>;
@@ -1342,8 +1454,9 @@
compatible = "rockchip,rk3399-pcie-phy";
clocks = <&cru SCLK_PCIEPHY_REF>;
clock-names = "refclk";
- #phy-cells = <0>;
+ #phy-cells = <1>;
resets = <&cru SRST_PCIEPHY>;
+ drive-impedance-ohm = <50>;
reset-names = "phy";
status = "disabled";
};
@@ -1592,11 +1705,11 @@
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "isp0_mmu";
- clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>;
+ clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_ISP0>;
rockchip,disable-mmu-reset;
- status = "disabled";
};
isp1_mmu: iommu@ff924000 {
@@ -1604,11 +1717,11 @@
reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "isp1_mmu";
- clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>;
+ clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_ISP1>;
rockchip,disable-mmu-reset;
- status = "disabled";
};
hdmi_sound: hdmi-sound {
@@ -1660,21 +1773,29 @@
};
mipi_dsi: mipi@ff960000 {
- compatible = "rockchip,rk3399_mipi_dsi";
+ compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0x0 0xff960000 0x0 0x8000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
- <&cru SCLK_DPHY_TX0_CFG>;
- clock-names = "ref", "pclk", "phy_cfg";
+ clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+ <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+ clock-names = "ref", "pclk", "phy_cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ resets = <&cru SRST_P_MIPI_DSI0>;
+ reset-names = "apb";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
+
ports {
- reg = <1>;
- mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in: port@0 {
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
+
mipi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_mipi>;
@@ -1698,6 +1819,8 @@
resets = <&cru SRST_P_MIPI_DSI1>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
@@ -1765,6 +1888,7 @@
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "gpu", "job", "mmu";
clocks = <&cru ACLK_GPU>;
+ #cooling-cells = <2>;
power-domains = <&power RK3399_PD_GPU>;
status = "disabled";
};
@@ -1929,14 +2053,14 @@
clock {
clk_32k: clk-32k {
- rockchip,pins = <0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
};
};
edp {
edp_hpd: edp-hpd {
rockchip,pins =
- <4 RK_PC7 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC7 2 &pcfg_pull_none>;
};
};
@@ -1944,382 +2068,409 @@
rgmii_pins: rgmii-pins {
rockchip,pins =
/* mac_txclk */
- <3 RK_PC1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PC1 1 &pcfg_pull_none_13ma>,
/* mac_rxclk */
- <3 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB6 1 &pcfg_pull_none>,
/* mac_mdio */
- <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB5 1 &pcfg_pull_none>,
/* mac_txen */
- <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PB4 1 &pcfg_pull_none_13ma>,
/* mac_clk */
- <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB3 1 &pcfg_pull_none>,
/* mac_rxdv */
- <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB1 1 &pcfg_pull_none>,
/* mac_mdc */
- <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB0 1 &pcfg_pull_none>,
/* mac_rxd1 */
- <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA7 1 &pcfg_pull_none>,
/* mac_rxd0 */
- <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA6 1 &pcfg_pull_none>,
/* mac_txd1 */
- <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA5 1 &pcfg_pull_none_13ma>,
/* mac_txd0 */
- <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA4 1 &pcfg_pull_none_13ma>,
/* mac_rxd3 */
- <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA3 1 &pcfg_pull_none>,
/* mac_rxd2 */
- <3 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA2 1 &pcfg_pull_none>,
/* mac_txd3 */
- <3 RK_PA1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA1 1 &pcfg_pull_none_13ma>,
/* mac_txd2 */
- <3 RK_PA0 RK_FUNC_1 &pcfg_pull_none_13ma>;
+ <3 RK_PA0 1 &pcfg_pull_none_13ma>;
};
rmii_pins: rmii-pins {
rockchip,pins =
/* mac_mdio */
- <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB5 1 &pcfg_pull_none>,
/* mac_txen */
- <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PB4 1 &pcfg_pull_none_13ma>,
/* mac_clk */
- <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB3 1 &pcfg_pull_none>,
/* mac_rxer */
- <3 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB2 1 &pcfg_pull_none>,
/* mac_rxdv */
- <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB1 1 &pcfg_pull_none>,
/* mac_mdc */
- <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PB0 1 &pcfg_pull_none>,
/* mac_rxd1 */
- <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA7 1 &pcfg_pull_none>,
/* mac_rxd0 */
- <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+ <3 RK_PA6 1 &pcfg_pull_none>,
/* mac_txd1 */
- <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+ <3 RK_PA5 1 &pcfg_pull_none_13ma>,
/* mac_txd0 */
- <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>;
+ <3 RK_PA4 1 &pcfg_pull_none_13ma>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins =
- <1 RK_PB7 RK_FUNC_2 &pcfg_pull_none>,
- <1 RK_PC0 RK_FUNC_2 &pcfg_pull_none>;
+ <1 RK_PB7 2 &pcfg_pull_none>,
+ <1 RK_PC0 2 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins =
- <4 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PA1 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PA2 1 &pcfg_pull_none>,
+ <4 RK_PA1 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins =
- <2 RK_PA1 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <2 RK_PA0 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ <2 RK_PA1 2 &pcfg_pull_none_12ma>,
+ <2 RK_PA0 2 &pcfg_pull_none_12ma>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins =
- <4 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PC0 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC1 1 &pcfg_pull_none>,
+ <4 RK_PC0 1 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
rockchip,pins =
- <1 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
- <1 RK_PB3 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PB4 1 &pcfg_pull_none>,
+ <1 RK_PB3 1 &pcfg_pull_none>;
};
};
i2c5 {
i2c5_xfer: i2c5-xfer {
rockchip,pins =
- <3 RK_PB3 RK_FUNC_2 &pcfg_pull_none>,
- <3 RK_PB2 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PB3 2 &pcfg_pull_none>,
+ <3 RK_PB2 2 &pcfg_pull_none>;
};
};
i2c6 {
i2c6_xfer: i2c6-xfer {
rockchip,pins =
- <2 RK_PB2 RK_FUNC_2 &pcfg_pull_none>,
- <2 RK_PB1 RK_FUNC_2 &pcfg_pull_none>;
+ <2 RK_PB2 2 &pcfg_pull_none>,
+ <2 RK_PB1 2 &pcfg_pull_none>;
};
};
i2c7 {
i2c7_xfer: i2c7-xfer {
rockchip,pins =
- <2 RK_PB0 RK_FUNC_2 &pcfg_pull_none>,
- <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>;
+ <2 RK_PB0 2 &pcfg_pull_none>,
+ <2 RK_PA7 2 &pcfg_pull_none>;
};
};
i2c8 {
i2c8_xfer: i2c8-xfer {
rockchip,pins =
- <1 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
- <1 RK_PC4 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PC5 1 &pcfg_pull_none>,
+ <1 RK_PC4 1 &pcfg_pull_none>;
};
};
i2s0 {
+ i2s0_2ch_bus: i2s0-2ch-bus {
+ rockchip,pins =
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
+ };
+
i2s0_8ch_bus: i2s0-8ch-bus {
rockchip,pins =
- <3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD1 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD4 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD5 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD6 RK_FUNC_1 &pcfg_pull_none>,
- <3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PA0 RK_FUNC_1 &pcfg_pull_none>;
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ <3 RK_PD4 1 &pcfg_pull_none>,
+ <3 RK_PD5 1 &pcfg_pull_none>,
+ <3 RK_PD6 1 &pcfg_pull_none>,
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ <4 RK_PA0 1 &pcfg_pull_none>;
};
};
i2s1 {
i2s1_2ch_bus: i2s1-2ch-bus {
rockchip,pins =
- <4 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
- <4 RK_PA7 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PA3 1 &pcfg_pull_none>,
+ <4 RK_PA4 1 &pcfg_pull_none>,
+ <4 RK_PA5 1 &pcfg_pull_none>,
+ <4 RK_PA6 1 &pcfg_pull_none>,
+ <4 RK_PA7 1 &pcfg_pull_none>;
};
};
sdio0 {
sdio0_bus1: sdio0-bus1 {
rockchip,pins =
- <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PC4 1 &pcfg_pull_up>;
};
sdio0_bus4: sdio0-bus4 {
rockchip,pins =
- <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PC4 1 &pcfg_pull_up>,
+ <2 RK_PC5 1 &pcfg_pull_up>,
+ <2 RK_PC6 1 &pcfg_pull_up>,
+ <2 RK_PC7 1 &pcfg_pull_up>;
};
sdio0_cmd: sdio0-cmd {
rockchip,pins =
- <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD0 1 &pcfg_pull_up>;
};
sdio0_clk: sdio0-clk {
rockchip,pins =
- <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PD1 1 &pcfg_pull_none>;
};
sdio0_cd: sdio0-cd {
rockchip,pins =
- <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD2 1 &pcfg_pull_up>;
};
sdio0_pwr: sdio0-pwr {
rockchip,pins =
- <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD3 1 &pcfg_pull_up>;
};
sdio0_bkpwr: sdio0-bkpwr {
rockchip,pins =
- <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PD4 1 &pcfg_pull_up>;
};
sdio0_wp: sdio0-wp {
rockchip,pins =
- <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PA3 1 &pcfg_pull_up>;
};
sdio0_int: sdio0-int {
rockchip,pins =
- <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PA4 1 &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins =
- <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PB0 1 &pcfg_pull_up>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins =
- <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PB0 1 &pcfg_pull_up>,
+ <4 RK_PB1 1 &pcfg_pull_up>,
+ <4 RK_PB2 1 &pcfg_pull_up>,
+ <4 RK_PB3 1 &pcfg_pull_up>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins =
- <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PB4 1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins =
- <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>;
+ <4 RK_PB5 1 &pcfg_pull_up>;
};
sdmmc_cd: sdmmc-cd {
rockchip,pins =
- <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PA7 1 &pcfg_pull_up>;
};
sdmmc_wp: sdmmc-wp {
rockchip,pins =
- <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>;
+ <0 RK_PB0 1 &pcfg_pull_up>;
};
};
sleep {
ap_pwroff: ap-pwroff {
- rockchip,pins = <1 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
};
ddrio_pwroff: ddrio-pwroff {
- rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
};
};
spdif {
spdif_bus: spdif-bus {
rockchip,pins =
- <4 RK_PC5 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC5 1 &pcfg_pull_none>;
};
spdif_bus_1: spdif-bus-1 {
rockchip,pins =
- <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ <3 RK_PC0 3 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins =
- <3 RK_PA6 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA6 2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins =
- <3 RK_PA7 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA7 2 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins =
- <3 RK_PB0 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PB0 2 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
rockchip,pins =
- <3 RK_PA5 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA5 2 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
rockchip,pins =
- <3 RK_PA4 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA4 2 &pcfg_pull_up>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins =
- <1 RK_PB1 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PB1 2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins =
- <1 RK_PB2 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PB2 2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
rockchip,pins =
- <1 RK_PA7 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PA7 2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
rockchip,pins =
- <1 RK_PB0 RK_FUNC_2 &pcfg_pull_up>;
+ <1 RK_PB0 2 &pcfg_pull_up>;
};
};
spi2 {
spi2_clk: spi2-clk {
rockchip,pins =
- <2 RK_PB3 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB3 1 &pcfg_pull_up>;
};
spi2_cs0: spi2-cs0 {
rockchip,pins =
- <2 RK_PB4 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB4 1 &pcfg_pull_up>;
};
spi2_rx: spi2-rx {
rockchip,pins =
- <2 RK_PB1 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB1 1 &pcfg_pull_up>;
};
spi2_tx: spi2-tx {
rockchip,pins =
- <2 RK_PB2 RK_FUNC_1 &pcfg_pull_up>;
+ <2 RK_PB2 1 &pcfg_pull_up>;
};
};
spi3 {
spi3_clk: spi3-clk {
rockchip,pins =
- <1 RK_PC1 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC1 1 &pcfg_pull_up>;
};
spi3_cs0: spi3-cs0 {
rockchip,pins =
- <1 RK_PC2 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC2 1 &pcfg_pull_up>;
};
spi3_rx: spi3-rx {
rockchip,pins =
- <1 RK_PB7 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PB7 1 &pcfg_pull_up>;
};
spi3_tx: spi3-tx {
rockchip,pins =
- <1 RK_PC0 RK_FUNC_1 &pcfg_pull_up>;
+ <1 RK_PC0 1 &pcfg_pull_up>;
};
};
spi4 {
spi4_clk: spi4-clk {
rockchip,pins =
- <3 RK_PA2 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA2 2 &pcfg_pull_up>;
};
spi4_cs0: spi4-cs0 {
rockchip,pins =
- <3 RK_PA3 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA3 2 &pcfg_pull_up>;
};
spi4_rx: spi4-rx {
rockchip,pins =
- <3 RK_PA0 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA0 2 &pcfg_pull_up>;
};
spi4_tx: spi4-tx {
rockchip,pins =
- <3 RK_PA1 RK_FUNC_2 &pcfg_pull_up>;
+ <3 RK_PA1 2 &pcfg_pull_up>;
};
};
spi5 {
spi5_clk: spi5-clk {
rockchip,pins =
- <2 RK_PC6 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC6 2 &pcfg_pull_up>;
};
spi5_cs0: spi5-cs0 {
rockchip,pins =
- <2 RK_PC7 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC7 2 &pcfg_pull_up>;
};
spi5_rx: spi5-rx {
rockchip,pins =
- <2 RK_PC4 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PC4 2 &pcfg_pull_up>;
};
spi5_tx: spi5-tx {
rockchip,pins =
+ <2 RK_PC5 2 &pcfg_pull_up>;
+ };
+ };
+
+ testclk {
+ test_clkout0: test-clkout0 {
+ rockchip,pins =
+ <0 RK_PA0 1 &pcfg_pull_none>;
+ };
+
+ test_clkout1: test-clkout1 {
+ rockchip,pins =
- <2 RK_PC5 RK_FUNC_2 &pcfg_pull_up>;
+ <2 RK_PD1 2 &pcfg_pull_none>;
+ };
+
+ test_clkout2: test-clkout2 {
+ rockchip,pins =
+ <0 RK_PB0 3 &pcfg_pull_none>;
};
};
@@ -2329,168 +2480,168 @@
};
otp_out: otp-out {
- rockchip,pins = <1 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins =
- <2 RK_PC0 RK_FUNC_1 &pcfg_pull_up>,
- <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PC0 1 &pcfg_pull_up>,
+ <2 RK_PC1 1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins =
- <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PC2 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
rockchip,pins =
- <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
+ <2 RK_PC3 1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins =
- <3 RK_PB4 RK_FUNC_2 &pcfg_pull_up>,
- <3 RK_PB5 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PB4 2 &pcfg_pull_up>,
+ <3 RK_PB5 2 &pcfg_pull_none>;
};
};
uart2a {
uart2a_xfer: uart2a-xfer {
rockchip,pins =
- <4 RK_PB0 RK_FUNC_2 &pcfg_pull_up>,
- <4 RK_PB1 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PB0 2 &pcfg_pull_up>,
+ <4 RK_PB1 2 &pcfg_pull_none>;
};
};
uart2b {
uart2b_xfer: uart2b-xfer {
rockchip,pins =
- <4 RK_PC0 RK_FUNC_2 &pcfg_pull_up>,
- <4 RK_PC1 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC0 2 &pcfg_pull_up>,
+ <4 RK_PC1 2 &pcfg_pull_none>;
};
};
uart2c {
uart2c_xfer: uart2c-xfer {
rockchip,pins =
- <4 RK_PC3 RK_FUNC_1 &pcfg_pull_up>,
- <4 RK_PC4 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC3 1 &pcfg_pull_up>,
+ <4 RK_PC4 1 &pcfg_pull_none>;
};
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins =
- <3 RK_PB6 RK_FUNC_2 &pcfg_pull_up>,
- <3 RK_PB7 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PB6 2 &pcfg_pull_up>,
+ <3 RK_PB7 2 &pcfg_pull_none>;
};
uart3_cts: uart3-cts {
rockchip,pins =
- <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PC0 2 &pcfg_pull_none>;
};
uart3_rts: uart3-rts {
rockchip,pins =
- <3 RK_PC3 RK_FUNC_2 &pcfg_pull_none>;
+ <3 RK_PC1 2 &pcfg_pull_none>;
};
};
uart4 {
uart4_xfer: uart4-xfer {
rockchip,pins =
- <1 RK_PA7 RK_FUNC_1 &pcfg_pull_up>,
- <1 RK_PB0 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PA7 1 &pcfg_pull_up>,
+ <1 RK_PB0 1 &pcfg_pull_none>;
};
};
uarthdcp {
uarthdcp_xfer: uarthdcp-xfer {
rockchip,pins =
- <4 RK_PC5 RK_FUNC_2 &pcfg_pull_up>,
- <4 RK_PC6 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC5 2 &pcfg_pull_up>,
+ <4 RK_PC6 2 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC2 1 &pcfg_pull_none>;
};
+ pwm0_pin_pull_down: pwm0-pin-pull-down {
+ rockchip,pins =
+ <4 RK_PC2 1 &pcfg_pull_down>;
+ };
+
vop0_pwm_pin: vop0-pwm-pin {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ <4 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ vop1_pwm_pin: vop1-pwm-pin {
+ rockchip,pins =
+ <4 RK_PC2 3 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins =
- <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC6 1 &pcfg_pull_none>;
};
- vop1_pwm_pin: vop1-pwm-pin {
+ pwm1_pin_pull_down: pwm1-pin-pull-down {
rockchip,pins =
- <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
+ <4 RK_PC6 1 &pcfg_pull_down>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins =
- <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PC3 1 &pcfg_pull_none>;
};
pwm2_pin_pull_down: pwm2-pin-pull-down {
rockchip,pins =
- <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
+ <1 RK_PC3 1 &pcfg_pull_down>;
};
};
pwm3a {
pwm3a_pin: pwm3a-pin {
rockchip,pins =
- <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ <0 RK_PA6 1 &pcfg_pull_none>;
};
};
pwm3b {
pwm3b_pin: pwm3b-pin {
rockchip,pins =
- <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>;
+ <1 RK_PB6 1 &pcfg_pull_none>;
};
};
hdmi {
hdmi_i2c_xfer: hdmi-i2c-xfer {
rockchip,pins =
- <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>,
- <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>;
+ <4 RK_PC1 3 &pcfg_pull_none>,
+ <4 RK_PC0 3 &pcfg_pull_none>;
};
hdmi_cec: hdmi-cec {
rockchip,pins =
- <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ <4 RK_PC7 1 &pcfg_pull_none>;
};
};
pcie {
- pcie_clkreqn: pci-clkreqn {
- rockchip,pins =
- <2 RK_PD2 RK_FUNC_2 &pcfg_pull_none>;
- };
-
- pcie_clkreqnb: pci-clkreqnb {
- rockchip,pins =
- <4 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
- };
-
pcie_clkreqn_cpm: pci-clkreqn-cpm {
rockchip,pins =
<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;