global: Migrate CONFIG_PL011_CLOCK to CFG

Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/include/configs/corstone1000.h b/include/configs/corstone1000.h
index 8aec52d..3347c11 100644
--- a/include/configs/corstone1000.h
+++ b/include/configs/corstone1000.h
@@ -16,7 +16,7 @@
 
 #define V2M_BASE		0x80000000
 
-#define CONFIG_PL011_CLOCK	50000000
+#define CFG_PL011_CLOCK	50000000
 
 /* Physical Memory Map */
 #define PHYS_SDRAM_1		(V2M_BASE)
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 76e6054..97bb439 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -8,7 +8,7 @@
 
 #define CFG_SYS_BOOTMAPSZ		(16 << 20)
 
-#define CONFIG_PL011_CLOCK		150000000
+#define CFG_PL011_CLOCK		150000000
 
 /*
  * Miscellaneous configurable options
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index c1a98fd..f8a20ea 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -39,7 +39,7 @@
 
 
 /* Serial Port */
-#define CONFIG_PL011_CLOCK		(get_bus_freq(0) / 4)
+#define CFG_PL011_CLOCK		(get_bus_freq(0) / 4)
 #define CFG_SYS_SERIAL0		0x21c0000
 #define CFG_SYS_SERIAL1		0x21d0000
 #define CFG_SYS_SERIAL2		0x21e0000
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 32e0e06..90cb1a5 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -77,7 +77,7 @@
  * DUART Serial Driver.
  * Conflicts with AUART driver which can be set by board.
  */
-#define CONFIG_PL011_CLOCK		24000000
+#define CFG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
 /* Default baudrate can be overridden by board! */
 
diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h
index bfe559f..0e7d019 100644
--- a/include/configs/s5p4418_nanopi2.h
+++ b/include/configs/s5p4418_nanopi2.h
@@ -76,7 +76,7 @@
 /*-----------------------------------------------------------------------
  * serial console configuration
  */
-#define CONFIG_PL011_CLOCK		50000000
+#define CFG_PL011_CLOCK		50000000
 #define CONFIG_PL01x_PORTS		{(void *)PHY_BASEADDR_UART0, \
 					 (void *)PHY_BASEADDR_UART1, \
 					 (void *)PHY_BASEADDR_UART2, \
diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index e65d623..350cc69 100644
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -31,7 +31,7 @@
 
 /* Serial (pl011)       */
 #define UART_CLK			(62500000)
-#define CONFIG_PL011_CLOCK		UART_CLK
+#define CFG_PL011_CLOCK		UART_CLK
 #define CONFIG_PL01x_PORTS		{(void *)(0x2a400000)}
 
 /* Support MTD */
diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 8ba4054..2bca86b 100644
--- a/include/configs/thunderx_88xx.h
+++ b/include/configs/thunderx_88xx.h
@@ -17,7 +17,7 @@
 
 /* PL011 Serial Configuration */
 
-#define CONFIG_PL011_CLOCK		24000000
+#define CFG_PL011_CLOCK		24000000
 
 /* Generic Interrupt Controller Definitions */
 #define GICD_BASE			(0x801000000000)
diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h
index e007be8..436bf62 100644
--- a/include/configs/total_compute.h
+++ b/include/configs/total_compute.h
@@ -14,7 +14,7 @@
 #define UART0_BASE		0x7ff80000
 
 /* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK	7372800
+#define CFG_PL011_CLOCK	7372800
 
 /* Miscellaneous configurable options */
 
diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h
index 87b8c5d..43f7e45 100644
--- a/include/configs/vexpress_aemv8.h
+++ b/include/configs/vexpress_aemv8.h
@@ -86,9 +86,9 @@
 
 /* PL011 Serial Configuration */
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_PL011_CLOCK		7372800
+#define CFG_PL011_CLOCK		7372800
 #else
-#define CONFIG_PL011_CLOCK		24000000
+#define CFG_PL011_CLOCK		24000000
 #endif
 
 /* Physical Memory Map */
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 705a941..3fc70de 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -116,7 +116,7 @@
 #define CFG_SYS_TIMER_COUNTER	(V2M_TIMER01 + 0x4)
 
 /* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK		24000000
+#define CFG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{(void *)CFG_SYS_SERIAL0, \
 					 (void *)CFG_SYS_SERIAL1}