Add PCI support for Sorcery board.
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 49c7820..dc01f0c 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -48,38 +48,45 @@
/*
* Serial console configuration
*/
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */
+
+/* Define this for PSC console
+#define CONFIG_PSC_CONSOLE 1
+*/
+
#define CONFIG_EXTUART_CONSOLE 1
#ifdef CONFIG_EXTUART_CONSOLE
+# define CONFIG_CONS_INDEX 1
+# define CFG_NS16550_SERIAL
# define CFG_NS16550
# define CFG_NS16550_REG_SIZE 1
# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008)
+# define CFG_NS16550_CLK 18432000
#endif
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Supported commands
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CACHE | \
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_CACHE | \
CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NET | \
CFG_CMD_NFS | \
- CFG_CMD_PING | \
CFG_CMD_PCI | \
+ CFG_CMD_PING | \
CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
+ CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
#define CONFIG_NET_MULTI
@@ -260,10 +267,17 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* SDRAM configuration */
-#define CFG_SDRAM_TOTAL_BANKS 2
-#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
-#define CFG_SDRAM_SPD_SIZE 0x40
-#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
+#define CFG_SDRAM_TOTAL_BANKS 2
+#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
+#define CFG_SDRAM_SPD_SIZE 0x40
+#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
+
+/* SDRAM drive strength register */
+#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
+ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
+ (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
+ (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
+ (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT))
/*
* Ethernet configuration
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index dcb4092..3d907f8 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -53,6 +53,22 @@
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+/* PCI */
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+
+#define CONFIG_PCI_MEM_BUS 0x80000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x71000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_PCI_CFG_BUS 0x70000000
+#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS
+#define CONFIG_PCI_CFG_SIZE 0x01000000
+
/*
* Supported commands
*/
@@ -65,6 +81,7 @@
CFG_CMD_I2C | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
@@ -72,7 +89,6 @@
0)
/* CFG_CMD_MII | \ */
-/* CFG_CMD_PCI | \ */
/* CFG_CMD_USB | \ */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -113,6 +129,7 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
/*
* I2C configuration
@@ -138,49 +155,38 @@
/* Flash */
#define CFG_CS0_BASE 0xf800
#define CFG_CS0_MASK 0x08000000 /* 128 MB (two chips) */
-
-/* Workaround of hang-up after setting ctrl register for flash
- After reset this register has value 0x003ffd80, which differs
- from suggested only by the number of wait states.
-#define CFG_CS0_CTRL 0x003f1580
-*/
+#define CFG_CS0_CTRL 0x001019c0
/* NVM */
-#define CFG_CS1_BASE 0xf100
-#define CFG_CS1_MASK 0x00080000 /* 512K */
-#define CFG_CS1_CTRL 0x003ffd40 /* 8bit port size? */
+#define CFG_CS1_BASE 0xf7e8
+#define CFG_CS1_MASK 0x00040000 /* 256K */
+#define CFG_CS1_CTRL 0x00101940 /* 8bit port size */
/* Atlas2 + Gemini */
-/* This CS# is mandatory? */
-#define CFG_CS2_BASE 0xf10A
-#define CFG_CS2_MASK 0x00020000 /* 2x64K*/
-#define CFG_CS2_CTRL 0x003ffd00 /* 32bit port size? */
+#define CFG_CS2_BASE 0xf7e7
+#define CFG_CS2_MASK 0x00010000 /* 64K*/
+#define CFG_CS2_CTRL 0x001011c0 /* 16bit port size */
/* CAN Controller */
-/* This CS# is mandatory? */
-#define CFG_CS3_BASE 0xf10C
+#define CFG_CS3_BASE 0xf7e6
#define CFG_CS3_MASK 0x00010000 /* 64K */
-#define CFG_CS3_CTRL 0x003ffd40 /* 8Bit port size */
+#define CFG_CS3_CTRL 0x00102140 /* 8Bit port size */
/* Foreign interface */
-#define CFG_CS4_BASE 0xF10D
+#define CFG_CS4_BASE 0xf7e5
#define CFG_CS4_MASK 0x00010000 /* 64K */
-#define CFG_CS4_CTRL 0x003ffd80 /* 16bit port size */
+#define CFG_CS4_CTRL 0x00101dc0 /* 16bit port size */
-/* CPLD? */
-/* This CS# is mandatory? */
-#define CFG_CS5_BASE 0xF108
-#define CFG_CS5_MASK 0x00010000
-#define CFG_CS5_CTRL 0x003ffd80 /* 16bit port size */
+/* CPLD */
+#define CFG_CS5_BASE 0xf7e4
+#define CFG_CS5_MASK 0x00010000 /* 64K */
+#define CFG_CS5_CTRL 0x001000c0 /* 16bit port size */
#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16)
-#define CFG_FLASH_BASE CFG_FLASH0_BASE
+#define CFG_FLASH_BASE (CFG_FLASH0_BASE)
-#define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks (actually 4? (at least 2)) */
-#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip (actually 256) */
-
-
-#define PHYS_AMD_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */
+#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -191,9 +197,11 @@
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (CFG_FLASH0_BASE)
-#define CFG_ENV_SIZE PHYS_AMD_SECT_SIZE
-#define CFG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x8000000 - 0x40000)
+#define CFG_ENV_SIZE 0x4000 /* 16K */
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + 0x20000)
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
#define CONFIG_ENV_OVERWRITE 1
@@ -240,6 +248,13 @@
#define CFG_SDRAM_SPD_SIZE 0x100
#define CFG_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */
+/* SDRAM drive strength register (for SSTL_2 class II)*/
+#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
+ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
+ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \
+ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \
+ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT))
+
/*
* Ethernet configuration
*/
@@ -274,4 +289,9 @@
#define CFG_HID0_INIT 0
#define CFG_HID0_FINAL 0
+/*
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+*/
+
#endif /* __CONFIG_H */
diff --git a/include/mpc8220.h b/include/mpc8220.h
index d8d8bd3..ff7acc6 100644
--- a/include/mpc8220.h
+++ b/include/mpc8220.h
@@ -259,10 +259,12 @@
#define PSC_TFLWFPTR(x) (x&0x1ff) /* last write frame pointer */
/* PCI configuration (only for PLL determination)*/
-#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */
+#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */
#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK 0x07000000
#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT 24
+#define PCI_REG_PCICAR (MMAP_XCPCI + 0xF8) /* Configuration Address Register */
+
/* ------------------------------------------------------------------------ */
/*
* Macro for General Purpose Timer
@@ -300,18 +302,21 @@
*/
#define CFG_FEC1_PORT0_CONFIG 0x00000000
#define CFG_FEC1_PORT1_CONFIG 0x00000000
-#define CFG_1284_PORT0_CONFIG 0x55555557
-#define CFG_1284_PORT1_CONFIG 0x80000000
+#define CFG_1284_PORT0_CONFIG 0x00000000
+#define CFG_1284_PORT1_CONFIG 0x00000000
#define CFG_FEC2_PORT2_CONFIG 0x00000000
-#define CFG_PEV_PORT2_CONFIG 0x55555540
-#define CFG_GP0_PORT0_CONFIG 0xaaaaaaa0
-#define CFG_GP1_PORT2_CONFIG 0xaaaaa000
-#define CFG_PSC_PORT3_CONFIG 0x00000000
+#define CFG_PEV_PORT2_CONFIG 0x00000000
+#define CFG_GP0_PORT0_CONFIG 0x00000000
+#define CFG_GP1_PORT2_CONFIG 0xaaaaaac0
+#define CFG_PSC_PORT3_CONFIG 0x00020000
+#define CFG_CS1_PORT3_CONFIG 0x00000000
#define CFG_CS2_PORT3_CONFIG 0x10000000
#define CFG_CS3_PORT3_CONFIG 0x40000000
#define CFG_CS4_PORT3_CONFIG 0x00000400
#define CFG_CS5_PORT3_CONFIG 0x00000200
-#define CFG_I2C_PORT3_CONFIG 0x003c0000
+#define CFG_PCI_PORT3_CONFIG 0x01400180
+#define CFG_I2C_PORT3_CONFIG 0x00000000
+#define CFG_GP2_PORT3_CONFIG 0x000200a0
/* ------------------------------------------------------------------------ */
/*
@@ -527,6 +532,162 @@
u32 EU37; /* DMA + 0xfc */
};
+/*
+ * PCI Header Registers
+ */
+typedef struct mpc8220_xcpci {
+ u32 dev_ven_id; /* 0xb00 - device/vendor ID */
+ u32 stat_cmd_reg; /* 0xb04 - status command register */
+ u32 class_code_rev_id; /* 0xb08 - class code / revision ID */
+ u32 bist_htyp_lat_cshl; /* 0xb0c - BIST/HeaderType/Latency/cache line */
+ u32 base0; /* 0xb10 - base address 0 */
+ u32 base1; /* 0xb14 - base address 1 */
+ u32 reserved1[4]; /* 0xb18->0xd27 - base address 2 - 5 */
+ u32 cis; /* 0xb28 - cardBus CIS pointer */
+ u32 sub_sys_ven_id; /* 0xb2c - sub system ID/ subsystem vendor ID */
+ u32 reserved2; /* 0xb30 - expansion ROM base address */
+ u32 reserved3; /* 0xb00 - reserved */
+ u32 reserved4; /* 0xb00 - reserved */
+ u32 mlat_mgnt_ipl; /* 0xb3c - MaxLat/MinGnt/ int pin/int line */
+ u32 reserved5[8];
+ /* MPC8220 specific - not accessible in PCI header space externally */
+ u32 glb_stat_ctl; /* 0xb60 - Global Status Control */
+ u32 target_bar0; /* 0xb64 - Target Base Address 0 */
+ u32 target_bar1; /* 0xb68 - Target Base Address 1 */
+ u32 target_ctrl; /* 0xb6c - Target Control */
+ u32 init_win0; /* 0xb70 - Initiator Window 0 Base/Translation */
+ u32 init_win1; /* 0xb74 - Initiator Window 1 Base/Translation */
+ u32 init_win2; /* 0xb78 - Initiator Window 2 Base/Translation */
+ u32 reserved6; /* 0xb7c - reserved */
+ u32 init_win_cfg; /* 0xb80 */
+ u32 init_ctrl; /* 0xb84 */
+ u32 init_stat; /* 0xb88 */
+ u32 reserved7[27];
+ u32 cfg_adr; /* 0xbf8 */
+ u32 reserved8;
+} mpc8220_xcpci_t;
+
+/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB,
+ reg1 - 1GB */
+#define PCI_BASE_ADDR_REG0 0x40000000
+#define PCI_BASE_ADDR_REG1 (CFG_SDRAM_BASE)
+#define PCI_TARGET_BASE_ADDR_REG0 (CFG_MBAR)
+#define PCI_TARGET_BASE_ADDR_REG1 (CFG_SDRAM_BASE)
+#define PCI_TARGET_BASE_ADDR_EN 1<<0
+
+
+/* PCI Global Status/Control Register (PCIGSCR) */
+#define PCI_GLB_STAT_CTRL_PE_SHIFT 29
+#define PCI_GLB_STAT_CTRL_SE_SHIFT 28
+#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT 24
+#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK 0x7
+#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT 16
+#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK 0x7
+#define PCI_GLB_STAT_CTRL_PEE_SHIFT 13
+#define PCI_GLB_STAT_CTRL_SEE_SHIFT 12
+#define PCI_GLB_STAT_CTRL_PR_SHIFT 0
+
+#define PCI_GLB_STAT_CTRL_PE (1<<PCI_GLB_STAT_CTRL_PE_SHIFT)
+#define PCI_GLB_STAT_CTRL_SE (1<<PCI_GLB_STAT_CTRL_SE_SHIFT)
+#define PCI_GLB_STAT_CTRL_PEE (1<<PCI_GLB_STAT_CTRL_PEE_SHIFT)
+#define PCI_GLB_STAT_CTRL_SEE (1<<PCI_GLB_STAT_CTRL_SEE_SHIFT)
+#define PCI_GLB_STAT_CTRL_PR (1<<PCI_GLB_STAT_CTRL_PR_SHIFT)
+
+/* PCI Target Control Register (PCITCR) */
+#define PCI_TARGET_CTRL_LD_SHIFT 24
+#define PCI_TARGET_CTRL_P_SHIFT 16
+
+#define PCI_TARGET_CTRL_LD (1<<PCI_TARGET_CTRL_LD_SHIFT)
+#define PCI_TARGET_CTRL_P (1<<PCI_TARGET_CTRL_P_SHIFT)
+
+/* PCI Initiator Window Configuration Register (PCIIWCR) */
+#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT 27
+#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT 25
+#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK 0x3
+#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT 24
+#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT 19
+#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT 17
+#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK 0x3
+#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT 16
+#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT 11
+#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT 9
+#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK 0x3
+#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT 8
+
+#define PCI_INIT_WIN_CFG_WIN_MEM_READ 0x0
+#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE 0x1
+#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE 0x2
+
+#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT)
+#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT)
+#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT)
+#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT)
+#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT)
+#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT)
+
+/* PCI Initiator Control Register (PCIICR) */
+#define PCI_INIT_CTRL_REE_SHIFT 26
+#define PCI_INIT_CTRL_IAE_SHIFT 25
+#define PCI_INIT_CTRL_TAE_SHIFT 24
+#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT 0
+#define PCI_INIT_CTRL_MAX_RETRIES_MASK 0xff
+
+#define PCI_INIT_CTRL_REE (1<<PCI_INIT_CTRL_REE_SHIFT)
+#define PCI_INIT_CTRL_IAE (1<<PCI_INIT_CTRL_IAE_SHIFT)
+#define PCI_INIT_CTRL_TAE (1<<PCI_INIT_CTRL_TAE_SHIFT)
+
+/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */
+#define PCI_STAT_CMD_PE_SHIFT 31
+#define PCI_STAT_CMD_SE_SHIFT 30
+#define PCI_STAT_CMD_MA_SHIFT 29
+#define PCI_STAT_CMD_TR_SHIFT 28
+#define PCI_STAT_CMD_TS_SHIFT 27
+#define PCI_STAT_CMD_DT_SHIFT 25
+#define PCI_STAT_CMD_DT_MASK 0x3
+#define PCI_STAT_CMD_DP_SHIFT 24
+#define PCI_STAT_CMD_FC_SHIFT 23
+#define PCI_STAT_CMD_R_SHIFT 22
+#define PCI_STAT_CMD_66M_SHIFT 21
+#define PCI_STAT_CMD_C_SHIFT 20
+#define PCI_STAT_CMD_F_SHIFT 9
+#define PCI_STAT_CMD_S_SHIFT 8
+#define PCI_STAT_CMD_ST_SHIFT 7
+#define PCI_STAT_CMD_PER_SHIFT 6
+#define PCI_STAT_CMD_V_SHIFT 5
+#define PCI_STAT_CMD_MW_SHIFT 4
+#define PCI_STAT_CMD_SP_SHIFT 3
+#define PCI_STAT_CMD_B_SHIFT 2
+#define PCI_STAT_CMD_M_SHIFT 1
+#define PCI_STAT_CMD_IO_SHIFT 0
+
+#define PCI_STAT_CMD_PE (1<<PCI_STAT_CMD_PE_SHIFT)
+#define PCI_STAT_CMD_SE (1<<PCI_STAT_CMD_SE_SHIFT)
+#define PCI_STAT_CMD_MA (1<<PCI_STAT_CMD_MA_SHIFT)
+#define PCI_STAT_CMD_TR (1<<PCI_STAT_CMD_TR_SHIFT)
+#define PCI_STAT_CMD_TS (1<<PCI_STAT_CMD_TS_SHIFT)
+#define PCI_STAT_CMD_DP (1<<PCI_STAT_CMD_DP_SHIFT)
+#define PCI_STAT_CMD_FC (1<<PCI_STAT_CMD_FC_SHIFT)
+#define PCI_STAT_CMD_R (1<<PCI_STAT_CMD_R_SHIFT)
+#define PCI_STAT_CMD_66M (1<<PCI_STAT_CMD_66M_SHIFT)
+#define PCI_STAT_CMD_C (1<<PCI_STAT_CMD_C_SHIFT)
+#define PCI_STAT_CMD_F (1<<PCI_STAT_CMD_F_SHIFT)
+#define PCI_STAT_CMD_S (1<<PCI_STAT_CMD_S_SHIFT)
+#define PCI_STAT_CMD_ST (1<<PCI_STAT_CMD_ST_SHIFT)
+#define PCI_STAT_CMD_PER (1<<PCI_STAT_CMD_PER_SHIFT)
+#define PCI_STAT_CMD_V (1<<PCI_STAT_CMD_V_SHIFT)
+#define PCI_STAT_CMD_MW (1<<PCI_STAT_CMD_MW_SHIFT)
+#define PCI_STAT_CMD_SP (1<<PCI_STAT_CMD_SP_SHIFT)
+#define PCI_STAT_CMD_B (1<<PCI_STAT_CMD_B_SHIFT)
+#define PCI_STAT_CMD_M (1<<PCI_STAT_CMD_M_SHIFT)
+#define PCI_STAT_CMD_IO (1<<PCI_STAT_CMD_IO_SHIFT)
+
+/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */
+#define PCI_CFG1_HT_SHIFT 16
+#define PCI_CFG1_HT_MASK 0xff
+#define PCI_CFG1_LT_SHIFT 8
+#define PCI_CFG1_LT_MASK 0xff
+#define PCI_CFG1_CLS_SHIFT 0
+#define PCI_CFG1_CLS_MASK 0xf
/* function prototypes */
void loadtask(int basetask, int tasks);