commit 5c0c3809ccc7468c4ebe219465d8d5284cc8c3e8
author Tim Lunn <tim@feathertop.org> Wed Jan 24 14:25:57 2024 +1100
committer Kever Yang <kever.yang@rock-chips.com> Sun Feb 04 18:45:58 2024 +0800
tree 5a7af20c5c7dc3cec58772ef7193ab60293051c6
parent 79667912950fcf2f3cab44257802090b625fc716

arm: dts: rockchip: Sync rv1126 dts from linux 6.8-rc1

Sync linux dts files for rv1126 boards from linux v6.8-rc1 tag. Includes
the newly added dts for Sonoff iHost.

Signed-off-by: Tim Lunn <tim@feathertop.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

arch/arm/dts/rv1126-edgeble-neu2-io.dts

diff --git a/arch/arm/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/dts/rv1126-edgeble-neu2-io.dts
index dded0a1..0c2396b 100644
--- a/arch/arm/dts/rv1126-edgeble-neu2-io.dts
+++ b/arch/arm/dts/rv1126-edgeble-neu2-io.dts
@@ -20,6 +20,76 @@
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	v3v3_sys: v3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			  <&cru CLK_GMAC_ETHERNET_OUT>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
+	assigned-clock-rates = <125000000>, <0>, <25000000>;
+	clock_in_out = "input";
+	phy-handle = <&phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x1a>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm11 {
+	status = "okay";
 };
 
 &sdmmc {