| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * This file is part of UBIFS. |
| * |
| * Copyright (C) 2006-2008 Nokia Corporation. |
| * |
| * Authors: Artem Bityutskiy (Битюцкий Артём) |
| * Adrian Hunter |
| */ |
| |
| /* |
| * This file describes UBIFS on-flash format and contains definitions of all the |
| * relevant data structures and constants. |
| * |
| * All UBIFS on-flash objects are stored in the form of nodes. All nodes start |
| * with the UBIFS node magic number and have the same common header. Nodes |
| * always sit at 8-byte aligned positions on the media and node header sizes are |
| * also 8-byte aligned (except for the indexing node and the padding node). |
| */ |
| |
| #ifndef __UBIFS_MEDIA_H__ |
| #define __UBIFS_MEDIA_H__ |
| |
| /* UBIFS node magic number (must not have the padding byte first or last) */ |
| #define UBIFS_NODE_MAGIC 0x06101831 |
| |
| /* |
| * UBIFS on-flash format version. This version is increased when the on-flash |
| * format is changing. If this happens, UBIFS is will support older versions as |
| * well. But older UBIFS code will not support newer formats. Format changes |
| * will be rare and only when absolutely necessary, e.g. to fix a bug or to add |
| * a new feature. |
| * |
| * UBIFS went into mainline kernel with format version 4. The older formats |
| * were development formats. |
| */ |
| #define UBIFS_FORMAT_VERSION 4 |
| |
| /* |
| * Read-only compatibility version. If the UBIFS format is changed, older UBIFS |
| * implementations will not be able to mount newer formats in read-write mode. |
| * However, depending on the change, it may be possible to mount newer formats |
| * in R/O mode. This is indicated by the R/O compatibility version which is |
| * stored in the super-block. |
| * |
| * This is needed to support boot-loaders which only need R/O mounting. With |
| * this flag it is possible to do UBIFS format changes without a need to update |
| * boot-loaders. |
| */ |
| #define UBIFS_RO_COMPAT_VERSION 0 |
| |
| /* Minimum logical eraseblock size in bytes */ |
| #define UBIFS_MIN_LEB_SZ (15*1024) |
| |
| /* Initial CRC32 value used when calculating CRC checksums */ |
| #define UBIFS_CRC32_INIT 0xFFFFFFFFU |
| |
| /* |
| * UBIFS does not try to compress data if its length is less than the below |
| * constant. |
| */ |
| #define UBIFS_MIN_COMPR_LEN 128 |
| |
| /* |
| * If compressed data length is less than %UBIFS_MIN_COMPRESS_DIFF bytes |
| * shorter than uncompressed data length, UBIFS prefers to leave this data |
| * node uncompress, because it'll be read faster. |
| */ |
| #define UBIFS_MIN_COMPRESS_DIFF 64 |
| |
| /* Root inode number */ |
| #define UBIFS_ROOT_INO 1 |
| |
| /* Lowest inode number used for regular inodes (not UBIFS-only internal ones) */ |
| #define UBIFS_FIRST_INO 64 |
| |
| /* |
| * Maximum file name and extended attribute length (must be a multiple of 8, |
| * minus 1). |
| */ |
| #define UBIFS_MAX_NLEN 255 |
| |
| /* Maximum number of data journal heads */ |
| #define UBIFS_MAX_JHEADS 1 |
| |
| /* |
| * Size of UBIFS data block. Note, UBIFS is not a block oriented file-system, |
| * which means that it does not treat the underlying media as consisting of |
| * blocks like in case of hard drives. Do not be confused. UBIFS block is just |
| * the maximum amount of data which one data node can have or which can be |
| * attached to an inode node. |
| */ |
| #define UBIFS_BLOCK_SIZE 4096 |
| #define UBIFS_BLOCK_SHIFT 12 |
| |
| /* UBIFS padding byte pattern (must not be first or last byte of node magic) */ |
| #define UBIFS_PADDING_BYTE 0xCE |
| |
| /* Maximum possible key length */ |
| #define UBIFS_MAX_KEY_LEN 16 |
| |
| /* Key length ("simple" format) */ |
| #define UBIFS_SK_LEN 8 |
| |
| /* Minimum index tree fanout */ |
| #define UBIFS_MIN_FANOUT 3 |
| |
| /* Maximum number of levels in UBIFS indexing B-tree */ |
| #define UBIFS_MAX_LEVELS 512 |
| |
| /* Maximum amount of data attached to an inode in bytes */ |
| #define UBIFS_MAX_INO_DATA UBIFS_BLOCK_SIZE |
| |
| /* LEB Properties Tree fanout (must be power of 2) and fanout shift */ |
| #define UBIFS_LPT_FANOUT 4 |
| #define UBIFS_LPT_FANOUT_SHIFT 2 |
| |
| /* LEB Properties Tree bit field sizes */ |
| #define UBIFS_LPT_CRC_BITS 16 |
| #define UBIFS_LPT_CRC_BYTES 2 |
| #define UBIFS_LPT_TYPE_BITS 4 |
| |
| /* The key is always at the same position in all keyed nodes */ |
| #define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key) |
| |
| /* Garbage collector journal head number */ |
| #define UBIFS_GC_HEAD 0 |
| /* Base journal head number */ |
| #define UBIFS_BASE_HEAD 1 |
| /* Data journal head number */ |
| #define UBIFS_DATA_HEAD 2 |
| |
| /* |
| * LEB Properties Tree node types. |
| * |
| * UBIFS_LPT_PNODE: LPT leaf node (contains LEB properties) |
| * UBIFS_LPT_NNODE: LPT internal node |
| * UBIFS_LPT_LTAB: LPT's own lprops table |
| * UBIFS_LPT_LSAVE: LPT's save table (big model only) |
| * UBIFS_LPT_NODE_CNT: count of LPT node types |
| * UBIFS_LPT_NOT_A_NODE: all ones (15 for 4 bits) is never a valid node type |
| */ |
| enum { |
| UBIFS_LPT_PNODE, |
| UBIFS_LPT_NNODE, |
| UBIFS_LPT_LTAB, |
| UBIFS_LPT_LSAVE, |
| UBIFS_LPT_NODE_CNT, |
| UBIFS_LPT_NOT_A_NODE = (1 << UBIFS_LPT_TYPE_BITS) - 1, |
| }; |
| |
| /* |
| * UBIFS inode types. |
| * |
| * UBIFS_ITYPE_REG: regular file |
| * UBIFS_ITYPE_DIR: directory |
| * UBIFS_ITYPE_LNK: soft link |
| * UBIFS_ITYPE_BLK: block device node |
| * UBIFS_ITYPE_CHR: character device node |
| * UBIFS_ITYPE_FIFO: fifo |
| * UBIFS_ITYPE_SOCK: socket |
| * UBIFS_ITYPES_CNT: count of supported file types |
| */ |
| enum { |
| UBIFS_ITYPE_REG, |
| UBIFS_ITYPE_DIR, |
| UBIFS_ITYPE_LNK, |
| UBIFS_ITYPE_BLK, |
| UBIFS_ITYPE_CHR, |
| UBIFS_ITYPE_FIFO, |
| UBIFS_ITYPE_SOCK, |
| UBIFS_ITYPES_CNT, |
| }; |
| |
| /* |
| * Supported key hash functions. |
| * |
| * UBIFS_KEY_HASH_R5: R5 hash |
| * UBIFS_KEY_HASH_TEST: test hash which just returns first 4 bytes of the name |
| */ |
| enum { |
| UBIFS_KEY_HASH_R5, |
| UBIFS_KEY_HASH_TEST, |
| }; |
| |
| /* |
| * Supported key formats. |
| * |
| * UBIFS_SIMPLE_KEY_FMT: simple key format |
| */ |
| enum { |
| UBIFS_SIMPLE_KEY_FMT, |
| }; |
| |
| /* |
| * The simple key format uses 29 bits for storing UBIFS block number and hash |
| * value. |
| */ |
| #define UBIFS_S_KEY_BLOCK_BITS 29 |
| #define UBIFS_S_KEY_BLOCK_MASK 0x1FFFFFFF |
| #define UBIFS_S_KEY_HASH_BITS UBIFS_S_KEY_BLOCK_BITS |
| #define UBIFS_S_KEY_HASH_MASK UBIFS_S_KEY_BLOCK_MASK |
| |
| /* |
| * Key types. |
| * |
| * UBIFS_INO_KEY: inode node key |
| * UBIFS_DATA_KEY: data node key |
| * UBIFS_DENT_KEY: directory entry node key |
| * UBIFS_XENT_KEY: extended attribute entry key |
| * UBIFS_KEY_TYPES_CNT: number of supported key types |
| */ |
| enum { |
| UBIFS_INO_KEY, |
| UBIFS_DATA_KEY, |
| UBIFS_DENT_KEY, |
| UBIFS_XENT_KEY, |
| UBIFS_KEY_TYPES_CNT, |
| }; |
| |
| /* Count of LEBs reserved for the superblock area */ |
| #define UBIFS_SB_LEBS 1 |
| /* Count of LEBs reserved for the master area */ |
| #define UBIFS_MST_LEBS 2 |
| |
| /* First LEB of the superblock area */ |
| #define UBIFS_SB_LNUM 0 |
| /* First LEB of the master area */ |
| #define UBIFS_MST_LNUM (UBIFS_SB_LNUM + UBIFS_SB_LEBS) |
| /* First LEB of the log area */ |
| #define UBIFS_LOG_LNUM (UBIFS_MST_LNUM + UBIFS_MST_LEBS) |
| |
| /* |
| * The below constants define the absolute minimum values for various UBIFS |
| * media areas. Many of them actually depend of flash geometry and the FS |
| * configuration (number of journal heads, orphan LEBs, etc). This means that |
| * the smallest volume size which can be used for UBIFS cannot be pre-defined |
| * by these constants. The file-system that meets the below limitation will not |
| * necessarily mount. UBIFS does run-time calculations and validates the FS |
| * size. |
| */ |
| |
| /* Minimum number of logical eraseblocks in the log */ |
| #define UBIFS_MIN_LOG_LEBS 2 |
| /* Minimum number of bud logical eraseblocks (one for each head) */ |
| #define UBIFS_MIN_BUD_LEBS 3 |
| /* Minimum number of journal logical eraseblocks */ |
| #define UBIFS_MIN_JNL_LEBS (UBIFS_MIN_LOG_LEBS + UBIFS_MIN_BUD_LEBS) |
| /* Minimum number of LPT area logical eraseblocks */ |
| #define UBIFS_MIN_LPT_LEBS 2 |
| /* Minimum number of orphan area logical eraseblocks */ |
| #define UBIFS_MIN_ORPH_LEBS 1 |
| /* |
| * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1 |
| * for GC, 1 for deletions, and at least 1 for committed data). |
| */ |
| #define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6) |
| |
| /* Minimum number of logical eraseblocks */ |
| #define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \ |
| UBIFS_MIN_LOG_LEBS + UBIFS_MIN_LPT_LEBS + \ |
| UBIFS_MIN_ORPH_LEBS + UBIFS_MIN_MAIN_LEBS) |
| |
| /* Node sizes (N.B. these are guaranteed to be multiples of 8) */ |
| #define UBIFS_CH_SZ sizeof(struct ubifs_ch) |
| #define UBIFS_INO_NODE_SZ sizeof(struct ubifs_ino_node) |
| #define UBIFS_DATA_NODE_SZ sizeof(struct ubifs_data_node) |
| #define UBIFS_DENT_NODE_SZ sizeof(struct ubifs_dent_node) |
| #define UBIFS_TRUN_NODE_SZ sizeof(struct ubifs_trun_node) |
| #define UBIFS_PAD_NODE_SZ sizeof(struct ubifs_pad_node) |
| #define UBIFS_SB_NODE_SZ sizeof(struct ubifs_sb_node) |
| #define UBIFS_MST_NODE_SZ sizeof(struct ubifs_mst_node) |
| #define UBIFS_REF_NODE_SZ sizeof(struct ubifs_ref_node) |
| #define UBIFS_IDX_NODE_SZ sizeof(struct ubifs_idx_node) |
| #define UBIFS_CS_NODE_SZ sizeof(struct ubifs_cs_node) |
| #define UBIFS_ORPH_NODE_SZ sizeof(struct ubifs_orph_node) |
| /* Extended attribute entry nodes are identical to directory entry nodes */ |
| #define UBIFS_XENT_NODE_SZ UBIFS_DENT_NODE_SZ |
| /* Only this does not have to be multiple of 8 bytes */ |
| #define UBIFS_BRANCH_SZ sizeof(struct ubifs_branch) |
| |
| /* Maximum node sizes (N.B. these are guaranteed to be multiples of 8) */ |
| #define UBIFS_MAX_DATA_NODE_SZ (UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE) |
| #define UBIFS_MAX_INO_NODE_SZ (UBIFS_INO_NODE_SZ + UBIFS_MAX_INO_DATA) |
| #define UBIFS_MAX_DENT_NODE_SZ (UBIFS_DENT_NODE_SZ + UBIFS_MAX_NLEN + 1) |
| #define UBIFS_MAX_XENT_NODE_SZ UBIFS_MAX_DENT_NODE_SZ |
| |
| /* The largest UBIFS node */ |
| #define UBIFS_MAX_NODE_SZ UBIFS_MAX_INO_NODE_SZ |
| |
| /* |
| * On-flash inode flags. |
| * |
| * UBIFS_COMPR_FL: use compression for this inode |
| * UBIFS_SYNC_FL: I/O on this inode has to be synchronous |
| * UBIFS_IMMUTABLE_FL: inode is immutable |
| * UBIFS_APPEND_FL: writes to the inode may only append data |
| * UBIFS_DIRSYNC_FL: I/O on this directory inode has to be synchronous |
| * UBIFS_XATTR_FL: this inode is the inode for an extended attribute value |
| * |
| * Note, these are on-flash flags which correspond to ioctl flags |
| * (@FS_COMPR_FL, etc). They have the same values now, but generally, do not |
| * have to be the same. |
| */ |
| enum { |
| UBIFS_COMPR_FL = 0x01, |
| UBIFS_SYNC_FL = 0x02, |
| UBIFS_IMMUTABLE_FL = 0x04, |
| UBIFS_APPEND_FL = 0x08, |
| UBIFS_DIRSYNC_FL = 0x10, |
| UBIFS_XATTR_FL = 0x20, |
| }; |
| |
| /* Inode flag bits used by UBIFS */ |
| #define UBIFS_FL_MASK 0x0000001F |
| |
| /* |
| * UBIFS compression algorithms. |
| * |
| * UBIFS_COMPR_NONE: no compression |
| * UBIFS_COMPR_LZO: LZO compression |
| * UBIFS_COMPR_ZLIB: ZLIB compression |
| * UBIFS_COMPR_ZSTD: ZSTD compression |
| * UBIFS_COMPR_TYPES_CNT: count of supported compression types |
| */ |
| enum { |
| UBIFS_COMPR_NONE, |
| UBIFS_COMPR_LZO, |
| UBIFS_COMPR_ZLIB, |
| UBIFS_COMPR_ZSTD, |
| UBIFS_COMPR_TYPES_CNT, |
| }; |
| |
| /* |
| * UBIFS node types. |
| * |
| * UBIFS_INO_NODE: inode node |
| * UBIFS_DATA_NODE: data node |
| * UBIFS_DENT_NODE: directory entry node |
| * UBIFS_XENT_NODE: extended attribute node |
| * UBIFS_TRUN_NODE: truncation node |
| * UBIFS_PAD_NODE: padding node |
| * UBIFS_SB_NODE: superblock node |
| * UBIFS_MST_NODE: master node |
| * UBIFS_REF_NODE: LEB reference node |
| * UBIFS_IDX_NODE: index node |
| * UBIFS_CS_NODE: commit start node |
| * UBIFS_ORPH_NODE: orphan node |
| * UBIFS_NODE_TYPES_CNT: count of supported node types |
| * |
| * Note, we index arrays by these numbers, so keep them low and contiguous. |
| * Node type constants for inodes, direntries and so on have to be the same as |
| * corresponding key type constants. |
| */ |
| enum { |
| UBIFS_INO_NODE, |
| UBIFS_DATA_NODE, |
| UBIFS_DENT_NODE, |
| UBIFS_XENT_NODE, |
| UBIFS_TRUN_NODE, |
| UBIFS_PAD_NODE, |
| UBIFS_SB_NODE, |
| UBIFS_MST_NODE, |
| UBIFS_REF_NODE, |
| UBIFS_IDX_NODE, |
| UBIFS_CS_NODE, |
| UBIFS_ORPH_NODE, |
| UBIFS_NODE_TYPES_CNT, |
| }; |
| |
| /* |
| * Master node flags. |
| * |
| * UBIFS_MST_DIRTY: rebooted uncleanly - master node is dirty |
| * UBIFS_MST_NO_ORPHS: no orphan inodes present |
| * UBIFS_MST_RCVRY: written by recovery |
| */ |
| enum { |
| UBIFS_MST_DIRTY = 1, |
| UBIFS_MST_NO_ORPHS = 2, |
| UBIFS_MST_RCVRY = 4, |
| }; |
| |
| /* |
| * Node group type (used by recovery to recover whole group or none). |
| * |
| * UBIFS_NO_NODE_GROUP: this node is not part of a group |
| * UBIFS_IN_NODE_GROUP: this node is a part of a group |
| * UBIFS_LAST_OF_NODE_GROUP: this node is the last in a group |
| */ |
| enum { |
| UBIFS_NO_NODE_GROUP = 0, |
| UBIFS_IN_NODE_GROUP, |
| UBIFS_LAST_OF_NODE_GROUP, |
| }; |
| |
| /* |
| * Superblock flags. |
| * |
| * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set |
| * UBIFS_FLG_SPACE_FIXUP: first-mount "fixup" of free space within LEBs needed |
| */ |
| enum { |
| UBIFS_FLG_BIGLPT = 0x02, |
| UBIFS_FLG_SPACE_FIXUP = 0x04, |
| }; |
| |
| /** |
| * struct ubifs_ch - common header node. |
| * @magic: UBIFS node magic number (%UBIFS_NODE_MAGIC) |
| * @crc: CRC-32 checksum of the node header |
| * @sqnum: sequence number |
| * @len: full node length |
| * @node_type: node type |
| * @group_type: node group type |
| * @padding: reserved for future, zeroes |
| * |
| * Every UBIFS node starts with this common part. If the node has a key, the |
| * key always goes next. |
| */ |
| struct ubifs_ch { |
| __le32 magic; |
| __le32 crc; |
| __le64 sqnum; |
| __le32 len; |
| __u8 node_type; |
| __u8 group_type; |
| __u8 padding[2]; |
| } __packed; |
| |
| /** |
| * union ubifs_dev_desc - device node descriptor. |
| * @new: new type device descriptor |
| * @huge: huge type device descriptor |
| * |
| * This data structure describes major/minor numbers of a device node. In an |
| * inode is a device node then its data contains an object of this type. UBIFS |
| * uses standard Linux "new" and "huge" device node encodings. |
| */ |
| union ubifs_dev_desc { |
| __le32 new; |
| __le64 huge; |
| } __packed; |
| |
| /** |
| * struct ubifs_ino_node - inode node. |
| * @ch: common header |
| * @key: node key |
| * @creat_sqnum: sequence number at time of creation |
| * @size: inode size in bytes (amount of uncompressed data) |
| * @atime_sec: access time seconds |
| * @ctime_sec: creation time seconds |
| * @mtime_sec: modification time seconds |
| * @atime_nsec: access time nanoseconds |
| * @ctime_nsec: creation time nanoseconds |
| * @mtime_nsec: modification time nanoseconds |
| * @nlink: number of hard links |
| * @uid: owner ID |
| * @gid: group ID |
| * @mode: access flags |
| * @flags: per-inode flags (%UBIFS_COMPR_FL, %UBIFS_SYNC_FL, etc) |
| * @data_len: inode data length |
| * @xattr_cnt: count of extended attributes this inode has |
| * @xattr_size: summarized size of all extended attributes in bytes |
| * @padding1: reserved for future, zeroes |
| * @xattr_names: sum of lengths of all extended attribute names belonging to |
| * this inode |
| * @compr_type: compression type used for this inode |
| * @padding2: reserved for future, zeroes |
| * @data: data attached to the inode |
| * |
| * Note, even though inode compression type is defined by @compr_type, some |
| * nodes of this inode may be compressed with different compressor - this |
| * happens if compression type is changed while the inode already has data |
| * nodes. But @compr_type will be use for further writes to the inode. |
| * |
| * Note, do not forget to amend 'zero_ino_node_unused()' function when changing |
| * the padding fields. |
| */ |
| struct ubifs_ino_node { |
| struct ubifs_ch ch; |
| __u8 key[UBIFS_MAX_KEY_LEN]; |
| __le64 creat_sqnum; |
| __le64 size; |
| __le64 atime_sec; |
| __le64 ctime_sec; |
| __le64 mtime_sec; |
| __le32 atime_nsec; |
| __le32 ctime_nsec; |
| __le32 mtime_nsec; |
| __le32 nlink; |
| __le32 uid; |
| __le32 gid; |
| __le32 mode; |
| __le32 flags; |
| __le32 data_len; |
| __le32 xattr_cnt; |
| __le32 xattr_size; |
| __u8 padding1[4]; /* Watch 'zero_ino_node_unused()' if changing! */ |
| __le32 xattr_names; |
| __le16 compr_type; |
| __u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */ |
| __u8 data[]; |
| } __packed; |
| |
| /** |
| * struct ubifs_dent_node - directory entry node. |
| * @ch: common header |
| * @key: node key |
| * @inum: target inode number |
| * @padding1: reserved for future, zeroes |
| * @type: type of the target inode (%UBIFS_ITYPE_REG, %UBIFS_ITYPE_DIR, etc) |
| * @nlen: name length |
| * @padding2: reserved for future, zeroes |
| * @name: zero-terminated name |
| * |
| * Note, do not forget to amend 'zero_dent_node_unused()' function when |
| * changing the padding fields. |
| */ |
| struct ubifs_dent_node { |
| struct ubifs_ch ch; |
| __u8 key[UBIFS_MAX_KEY_LEN]; |
| __le64 inum; |
| __u8 padding1; |
| __u8 type; |
| __le16 nlen; |
| __u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */ |
| #ifndef __UBOOT__ |
| __u8 name[]; |
| #else |
| char name[]; |
| #endif |
| } __packed; |
| |
| /** |
| * struct ubifs_data_node - data node. |
| * @ch: common header |
| * @key: node key |
| * @size: uncompressed data size in bytes |
| * @compr_type: compression type (%UBIFS_COMPR_NONE, %UBIFS_COMPR_LZO, etc) |
| * @padding: reserved for future, zeroes |
| * @data: data |
| * |
| * Note, do not forget to amend 'zero_data_node_unused()' function when |
| * changing the padding fields. |
| */ |
| struct ubifs_data_node { |
| struct ubifs_ch ch; |
| __u8 key[UBIFS_MAX_KEY_LEN]; |
| __le32 size; |
| __le16 compr_type; |
| __u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */ |
| __u8 data[]; |
| } __packed; |
| |
| /** |
| * struct ubifs_trun_node - truncation node. |
| * @ch: common header |
| * @inum: truncated inode number |
| * @padding: reserved for future, zeroes |
| * @old_size: size before truncation |
| * @new_size: size after truncation |
| * |
| * This node exists only in the journal and never goes to the main area. Note, |
| * do not forget to amend 'zero_trun_node_unused()' function when changing the |
| * padding fields. |
| */ |
| struct ubifs_trun_node { |
| struct ubifs_ch ch; |
| __le32 inum; |
| __u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */ |
| __le64 old_size; |
| __le64 new_size; |
| } __packed; |
| |
| /** |
| * struct ubifs_pad_node - padding node. |
| * @ch: common header |
| * @pad_len: how many bytes after this node are unused (because padded) |
| * @padding: reserved for future, zeroes |
| */ |
| struct ubifs_pad_node { |
| struct ubifs_ch ch; |
| __le32 pad_len; |
| } __packed; |
| |
| /** |
| * struct ubifs_sb_node - superblock node. |
| * @ch: common header |
| * @padding: reserved for future, zeroes |
| * @key_hash: type of hash function used in keys |
| * @key_fmt: format of the key |
| * @flags: file-system flags (%UBIFS_FLG_BIGLPT, etc) |
| * @min_io_size: minimal input/output unit size |
| * @leb_size: logical eraseblock size in bytes |
| * @leb_cnt: count of LEBs used by file-system |
| * @max_leb_cnt: maximum count of LEBs used by file-system |
| * @max_bud_bytes: maximum amount of data stored in buds |
| * @log_lebs: log size in logical eraseblocks |
| * @lpt_lebs: number of LEBs used for lprops table |
| * @orph_lebs: number of LEBs used for recording orphans |
| * @jhead_cnt: count of journal heads |
| * @fanout: tree fanout (max. number of links per indexing node) |
| * @lsave_cnt: number of LEB numbers in LPT's save table |
| * @fmt_version: UBIFS on-flash format version |
| * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc) |
| * @padding1: reserved for future, zeroes |
| * @rp_uid: reserve pool UID |
| * @rp_gid: reserve pool GID |
| * @rp_size: size of the reserved pool in bytes |
| * @padding2: reserved for future, zeroes |
| * @time_gran: time granularity in nanoseconds |
| * @uuid: UUID generated when the file system image was created |
| * @ro_compat_version: UBIFS R/O compatibility version |
| */ |
| struct ubifs_sb_node { |
| struct ubifs_ch ch; |
| __u8 padding[2]; |
| __u8 key_hash; |
| __u8 key_fmt; |
| __le32 flags; |
| __le32 min_io_size; |
| __le32 leb_size; |
| __le32 leb_cnt; |
| __le32 max_leb_cnt; |
| __le64 max_bud_bytes; |
| __le32 log_lebs; |
| __le32 lpt_lebs; |
| __le32 orph_lebs; |
| __le32 jhead_cnt; |
| __le32 fanout; |
| __le32 lsave_cnt; |
| __le32 fmt_version; |
| __le16 default_compr; |
| __u8 padding1[2]; |
| __le32 rp_uid; |
| __le32 rp_gid; |
| __le64 rp_size; |
| __le32 time_gran; |
| __u8 uuid[16]; |
| __le32 ro_compat_version; |
| __u8 padding2[3968]; |
| } __packed; |
| |
| /** |
| * struct ubifs_mst_node - master node. |
| * @ch: common header |
| * @highest_inum: highest inode number in the committed index |
| * @cmt_no: commit number |
| * @flags: various flags (%UBIFS_MST_DIRTY, etc) |
| * @log_lnum: start of the log |
| * @root_lnum: LEB number of the root indexing node |
| * @root_offs: offset within @root_lnum |
| * @root_len: root indexing node length |
| * @gc_lnum: LEB reserved for garbage collection (%-1 value means the LEB was |
| * not reserved and should be reserved on mount) |
| * @ihead_lnum: LEB number of index head |
| * @ihead_offs: offset of index head |
| * @index_size: size of index on flash |
| * @total_free: total free space in bytes |
| * @total_dirty: total dirty space in bytes |
| * @total_used: total used space in bytes (includes only data LEBs) |
| * @total_dead: total dead space in bytes (includes only data LEBs) |
| * @total_dark: total dark space in bytes (includes only data LEBs) |
| * @lpt_lnum: LEB number of LPT root nnode |
| * @lpt_offs: offset of LPT root nnode |
| * @nhead_lnum: LEB number of LPT head |
| * @nhead_offs: offset of LPT head |
| * @ltab_lnum: LEB number of LPT's own lprops table |
| * @ltab_offs: offset of LPT's own lprops table |
| * @lsave_lnum: LEB number of LPT's save table (big model only) |
| * @lsave_offs: offset of LPT's save table (big model only) |
| * @lscan_lnum: LEB number of last LPT scan |
| * @empty_lebs: number of empty logical eraseblocks |
| * @idx_lebs: number of indexing logical eraseblocks |
| * @leb_cnt: count of LEBs used by file-system |
| * @padding: reserved for future, zeroes |
| */ |
| struct ubifs_mst_node { |
| struct ubifs_ch ch; |
| __le64 highest_inum; |
| __le64 cmt_no; |
| __le32 flags; |
| __le32 log_lnum; |
| __le32 root_lnum; |
| __le32 root_offs; |
| __le32 root_len; |
| __le32 gc_lnum; |
| __le32 ihead_lnum; |
| __le32 ihead_offs; |
| __le64 index_size; |
| __le64 total_free; |
| __le64 total_dirty; |
| __le64 total_used; |
| __le64 total_dead; |
| __le64 total_dark; |
| __le32 lpt_lnum; |
| __le32 lpt_offs; |
| __le32 nhead_lnum; |
| __le32 nhead_offs; |
| __le32 ltab_lnum; |
| __le32 ltab_offs; |
| __le32 lsave_lnum; |
| __le32 lsave_offs; |
| __le32 lscan_lnum; |
| __le32 empty_lebs; |
| __le32 idx_lebs; |
| __le32 leb_cnt; |
| __u8 padding[344]; |
| } __packed; |
| |
| /** |
| * struct ubifs_ref_node - logical eraseblock reference node. |
| * @ch: common header |
| * @lnum: the referred logical eraseblock number |
| * @offs: start offset in the referred LEB |
| * @jhead: journal head number |
| * @padding: reserved for future, zeroes |
| */ |
| struct ubifs_ref_node { |
| struct ubifs_ch ch; |
| __le32 lnum; |
| __le32 offs; |
| __le32 jhead; |
| __u8 padding[28]; |
| } __packed; |
| |
| /** |
| * struct ubifs_branch - key/reference/length branch |
| * @lnum: LEB number of the target node |
| * @offs: offset within @lnum |
| * @len: target node length |
| * @key: key |
| */ |
| struct ubifs_branch { |
| __le32 lnum; |
| __le32 offs; |
| __le32 len; |
| #ifndef __UBOOT__ |
| __u8 key[]; |
| #else |
| char key[]; |
| #endif |
| } __packed; |
| |
| /** |
| * struct ubifs_idx_node - indexing node. |
| * @ch: common header |
| * @child_cnt: number of child index nodes |
| * @level: tree level |
| * @branches: LEB number / offset / length / key branches |
| */ |
| struct ubifs_idx_node { |
| struct ubifs_ch ch; |
| __le16 child_cnt; |
| __le16 level; |
| #ifndef __UBOOT__ |
| __u8 branches[]; |
| #else |
| char branches[]; |
| #endif |
| } __packed; |
| |
| /** |
| * struct ubifs_cs_node - commit start node. |
| * @ch: common header |
| * @cmt_no: commit number |
| */ |
| struct ubifs_cs_node { |
| struct ubifs_ch ch; |
| __le64 cmt_no; |
| } __packed; |
| |
| /** |
| * struct ubifs_orph_node - orphan node. |
| * @ch: common header |
| * @cmt_no: commit number (also top bit is set on the last node of the commit) |
| * @inos: inode numbers of orphans |
| */ |
| struct ubifs_orph_node { |
| struct ubifs_ch ch; |
| __le64 cmt_no; |
| __le64 inos[]; |
| } __packed; |
| |
| #endif /* __UBIFS_MEDIA_H__ */ |