| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * MediaTek ethernet IP driver for U-Boot |
| * |
| * Copyright (C) 2018 Stefan Roese <sr@denx.de> |
| * |
| * This code is mostly based on the code extracted from this MediaTek |
| * github repository: |
| * |
| * https://github.com/MediaTek-Labs/linkit-smart-uboot.git |
| * |
| * I was not able to find a specific license or other developers |
| * copyrights here, so I can't add them here. |
| */ |
| |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <miiphy.h> |
| #include <net.h> |
| #include <reset.h> |
| #include <wait_bit.h> |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/printk.h> |
| |
| /* Ethernet frame engine register */ |
| #define PDMA_RELATED 0x0800 |
| |
| #define TX_BASE_PTR0 (PDMA_RELATED + 0x000) |
| #define TX_MAX_CNT0 (PDMA_RELATED + 0x004) |
| #define TX_CTX_IDX0 (PDMA_RELATED + 0x008) |
| #define TX_DTX_IDX0 (PDMA_RELATED + 0x00c) |
| |
| #define RX_BASE_PTR0 (PDMA_RELATED + 0x100) |
| #define RX_MAX_CNT0 (PDMA_RELATED + 0x104) |
| #define RX_CALC_IDX0 (PDMA_RELATED + 0x108) |
| |
| #define PDMA_GLO_CFG (PDMA_RELATED + 0x204) |
| #define PDMA_RST_IDX (PDMA_RELATED + 0x208) |
| #define DLY_INT_CFG (PDMA_RELATED + 0x20c) |
| |
| #define SDM_RELATED 0x0c00 |
| |
| #define SDM_MAC_ADRL (SDM_RELATED + 0x0c) /* MAC address LSB */ |
| #define SDM_MAC_ADRH (SDM_RELATED + 0x10) /* MAC Address MSB */ |
| |
| #define RST_DTX_IDX0 BIT(0) |
| #define RST_DRX_IDX0 BIT(16) |
| |
| #define TX_DMA_EN BIT(0) |
| #define TX_DMA_BUSY BIT(1) |
| #define RX_DMA_EN BIT(2) |
| #define RX_DMA_BUSY BIT(3) |
| #define TX_WB_DDONE BIT(6) |
| |
| /* Ethernet switch register */ |
| #define MT7628_SWITCH_FCT0 0x0008 |
| #define MT7628_SWITCH_PFC1 0x0014 |
| #define MT7628_SWITCH_PVIDC0 0x0040 |
| #define MT7628_SWITCH_PVIDC1 0x0044 |
| #define MT7628_SWITCH_PVIDC2 0x0048 |
| #define MT7628_SWITCH_PVIDC3 0x004c |
| #define MT7628_SWITCH_VMSC0 0x0070 |
| #define MT7628_SWITCH_FPA 0x0084 |
| #define MT7628_SWITCH_SOCPC 0x008c |
| #define MT7628_SWITCH_POC0 0x0090 |
| #define MT7628_SWITCH_POC2 0x0098 |
| #define MT7628_SWITCH_SGC 0x009c |
| #define MT7628_SWITCH_PCR0 0x00c0 |
| #define PCR0_PHY_ADDR GENMASK(4, 0) |
| #define PCR0_PHY_REG GENMASK(12, 8) |
| #define PCR0_WT_PHY_CMD BIT(13) |
| #define PCR0_RD_PHY_CMD BIT(14) |
| #define PCR0_WT_DATA GENMASK(31, 16) |
| |
| #define MT7628_SWITCH_PCR1 0x00c4 |
| #define PCR1_WT_DONE BIT(0) |
| #define PCR1_RD_RDY BIT(1) |
| #define PCR1_RD_DATA GENMASK(31, 16) |
| |
| #define MT7628_SWITCH_FPA1 0x00c8 |
| #define MT7628_SWITCH_FCT2 0x00cc |
| #define MT7628_SWITCH_SGC2 0x00e4 |
| #define MT7628_SWITCH_BMU_CTRL 0x0110 |
| |
| /* rxd2 */ |
| #define RX_DMA_DONE BIT(31) |
| #define RX_DMA_LSO BIT(30) |
| #define RX_DMA_PLEN0 GENMASK(29, 16) |
| #define RX_DMA_TAG BIT(15) |
| |
| struct fe_rx_dma { |
| unsigned int rxd1; |
| unsigned int rxd2; |
| unsigned int rxd3; |
| unsigned int rxd4; |
| } __packed __aligned(4); |
| |
| #define TX_DMA_PLEN0 GENMASK(29, 16) |
| #define TX_DMA_LS1 BIT(14) |
| #define TX_DMA_LS0 BIT(30) |
| #define TX_DMA_DONE BIT(31) |
| |
| #define TX_DMA_INS_VLAN_MT7621 BIT(16) |
| #define TX_DMA_INS_VLAN BIT(7) |
| #define TX_DMA_INS_PPPOE BIT(12) |
| #define TX_DMA_PN GENMASK(26, 24) |
| |
| struct fe_tx_dma { |
| unsigned int txd1; |
| unsigned int txd2; |
| unsigned int txd3; |
| unsigned int txd4; |
| } __packed __aligned(4); |
| |
| #define NUM_RX_DESC 256 |
| #define NUM_TX_DESC 4 |
| #define NUM_PHYS 5 |
| |
| #define PADDING_LENGTH 60 |
| |
| #define MTK_QDMA_PAGE_SIZE 2048 |
| |
| #define CFG_MDIO_TIMEOUT 100 |
| #define CFG_DMA_STOP_TIMEOUT 100 |
| #define CFG_TX_DMA_TIMEOUT 100 |
| |
| struct mt7628_eth_dev { |
| void __iomem *base; /* frame engine base address */ |
| void __iomem *eth_sw_base; /* switch base address */ |
| |
| struct mii_dev *bus; |
| |
| struct fe_tx_dma *tx_ring; |
| struct fe_rx_dma *rx_ring; |
| |
| u8 *rx_buf[NUM_RX_DESC]; |
| |
| /* Point to the next RXD DMA wants to use in RXD Ring0 */ |
| int rx_dma_idx; |
| /* Point to the next TXD in TXD Ring0 CPU wants to use */ |
| int tx_dma_idx; |
| |
| struct reset_ctl rst_ephy; |
| |
| struct phy_device *phy; |
| |
| int wan_port; |
| }; |
| |
| static int mt7628_eth_free_pkt(struct udevice *dev, uchar *packet, int length); |
| |
| static int mdio_wait_read(struct mt7628_eth_dev *priv, u32 mask, bool mask_set) |
| { |
| void __iomem *base = priv->eth_sw_base; |
| int ret; |
| |
| ret = wait_for_bit_le32(base + MT7628_SWITCH_PCR1, mask, mask_set, |
| CFG_MDIO_TIMEOUT, false); |
| if (ret) { |
| printf("MDIO operation timeout!\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int mii_mgr_read(struct mt7628_eth_dev *priv, |
| u32 phy_addr, u32 phy_register, u32 *read_data) |
| { |
| void __iomem *base = priv->eth_sw_base; |
| u32 status = 0; |
| u32 ret; |
| |
| *read_data = 0xffff; |
| /* Make sure previous read operation is complete */ |
| ret = mdio_wait_read(priv, PCR1_RD_RDY, false); |
| if (ret) |
| return ret; |
| |
| writel(PCR0_RD_PHY_CMD | |
| FIELD_PREP(PCR0_PHY_REG, phy_register) | |
| FIELD_PREP(PCR0_PHY_ADDR, phy_addr), |
| base + MT7628_SWITCH_PCR0); |
| |
| /* Make sure previous read operation is complete */ |
| ret = mdio_wait_read(priv, PCR1_RD_RDY, true); |
| if (ret) |
| return ret; |
| |
| status = readl(base + MT7628_SWITCH_PCR1); |
| *read_data = FIELD_GET(PCR1_RD_DATA, status); |
| |
| return 0; |
| } |
| |
| static int mii_mgr_write(struct mt7628_eth_dev *priv, |
| u32 phy_addr, u32 phy_register, u32 write_data) |
| { |
| void __iomem *base = priv->eth_sw_base; |
| u32 data; |
| int ret; |
| |
| /* Make sure previous write operation is complete */ |
| ret = mdio_wait_read(priv, PCR1_WT_DONE, false); |
| if (ret) |
| return ret; |
| |
| data = FIELD_PREP(PCR0_WT_DATA, write_data) | |
| FIELD_PREP(PCR0_PHY_REG, phy_register) | |
| FIELD_PREP(PCR0_PHY_ADDR, phy_addr) | |
| PCR0_WT_PHY_CMD; |
| writel(data, base + MT7628_SWITCH_PCR0); |
| |
| return mdio_wait_read(priv, PCR1_WT_DONE, true); |
| } |
| |
| static int mt7628_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) |
| { |
| u32 val; |
| int ret; |
| |
| ret = mii_mgr_read(bus->priv, addr, reg, &val); |
| if (ret) |
| return ret; |
| |
| return val; |
| } |
| |
| static int mt7628_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, |
| u16 value) |
| { |
| return mii_mgr_write(bus->priv, addr, reg, value); |
| } |
| |
| static void mt7628_ephy_init(struct mt7628_eth_dev *priv) |
| { |
| int i; |
| |
| mii_mgr_write(priv, 0, 31, 0x2000); /* change G2 page */ |
| mii_mgr_write(priv, 0, 26, 0x0000); |
| |
| for (i = 0; i < 5; i++) { |
| mii_mgr_write(priv, i, 31, 0x8000); /* change L0 page */ |
| mii_mgr_write(priv, i, 0, 0x3100); |
| |
| /* EEE disable */ |
| mii_mgr_write(priv, i, 30, 0xa000); |
| mii_mgr_write(priv, i, 31, 0xa000); /* change L2 page */ |
| mii_mgr_write(priv, i, 16, 0x0606); |
| mii_mgr_write(priv, i, 23, 0x0f0e); |
| mii_mgr_write(priv, i, 24, 0x1610); |
| mii_mgr_write(priv, i, 30, 0x1f15); |
| mii_mgr_write(priv, i, 28, 0x6111); |
| } |
| |
| /* 100Base AOI setting */ |
| mii_mgr_write(priv, 0, 31, 0x5000); /* change G5 page */ |
| mii_mgr_write(priv, 0, 19, 0x004a); |
| mii_mgr_write(priv, 0, 20, 0x015a); |
| mii_mgr_write(priv, 0, 21, 0x00ee); |
| mii_mgr_write(priv, 0, 22, 0x0033); |
| mii_mgr_write(priv, 0, 23, 0x020a); |
| mii_mgr_write(priv, 0, 24, 0x0000); |
| mii_mgr_write(priv, 0, 25, 0x024a); |
| mii_mgr_write(priv, 0, 26, 0x035a); |
| mii_mgr_write(priv, 0, 27, 0x02ee); |
| mii_mgr_write(priv, 0, 28, 0x0233); |
| mii_mgr_write(priv, 0, 29, 0x000a); |
| mii_mgr_write(priv, 0, 30, 0x0000); |
| |
| /* Fix EPHY idle state abnormal behavior */ |
| mii_mgr_write(priv, 0, 31, 0x4000); /* change G4 page */ |
| mii_mgr_write(priv, 0, 29, 0x000d); |
| mii_mgr_write(priv, 0, 30, 0x0500); |
| } |
| |
| static void rt305x_esw_init(struct mt7628_eth_dev *priv) |
| { |
| void __iomem *base = priv->eth_sw_base; |
| void __iomem *reg; |
| u32 val = 0, pvid; |
| int i; |
| |
| /* |
| * FC_RLS_TH=200, FC_SET_TH=160 |
| * DROP_RLS=120, DROP_SET_TH=80 |
| */ |
| writel(0xc8a07850, base + MT7628_SWITCH_FCT0); |
| writel(0x00000000, base + MT7628_SWITCH_SGC2); |
| writel(0x00405555, base + MT7628_SWITCH_PFC1); |
| writel(0x00007f7f, base + MT7628_SWITCH_POC0); |
| writel(0x00007f7f, base + MT7628_SWITCH_POC2); /* disable VLAN */ |
| writel(0x0002500c, base + MT7628_SWITCH_FCT2); |
| /* hashing algorithm=XOR48, aging interval=300sec */ |
| writel(0x0008a301, base + MT7628_SWITCH_SGC); |
| writel(0x02404040, base + MT7628_SWITCH_SOCPC); |
| |
| /* Ext PHY Addr=0x1f */ |
| writel(0x3f502b28, base + MT7628_SWITCH_FPA1); |
| writel(0x00000000, base + MT7628_SWITCH_FPA); |
| /* 1us cycle number=125 (FE's clock=125Mhz) */ |
| writel(0x7d000000, base + MT7628_SWITCH_BMU_CTRL); |
| |
| /* LAN/WAN partition, WAN port will be unusable in u-boot network */ |
| if (priv->wan_port >= 0 && priv->wan_port < 6) { |
| for (i = 0; i < 8; i++) { |
| pvid = i == priv->wan_port ? 2 : 1; |
| reg = base + MT7628_SWITCH_PVIDC0 + (i / 2) * 4; |
| if (i % 2 == 0) { |
| val = pvid; |
| } else { |
| val |= (pvid << 12); |
| writel(val, reg); |
| } |
| } |
| |
| val = 0xffff407f; |
| val |= 1 << (8 + priv->wan_port); |
| val &= ~(1 << priv->wan_port); |
| writel(val, base + MT7628_SWITCH_VMSC0); |
| } |
| |
| /* Reset PHY */ |
| reset_assert(&priv->rst_ephy); |
| reset_deassert(&priv->rst_ephy); |
| mdelay(10); |
| |
| mt7628_ephy_init(priv); |
| } |
| |
| static void eth_dma_start(struct mt7628_eth_dev *priv) |
| { |
| void __iomem *base = priv->base; |
| |
| setbits_le32(base + PDMA_GLO_CFG, TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN); |
| } |
| |
| static void eth_dma_stop(struct mt7628_eth_dev *priv) |
| { |
| void __iomem *base = priv->base; |
| int ret; |
| |
| clrbits_le32(base + PDMA_GLO_CFG, TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN); |
| |
| /* Wait for DMA to stop */ |
| ret = wait_for_bit_le32(base + PDMA_GLO_CFG, |
| RX_DMA_BUSY | TX_DMA_BUSY, false, |
| CFG_DMA_STOP_TIMEOUT, false); |
| if (ret) |
| printf("DMA stop timeout error!\n"); |
| } |
| |
| static int mt7628_eth_write_hwaddr(struct udevice *dev) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| void __iomem *base = priv->base; |
| u8 *addr = ((struct eth_pdata *)dev_get_plat(dev))->enetaddr; |
| u32 val; |
| |
| /* Set MAC address. */ |
| val = addr[0]; |
| val = (val << 8) | addr[1]; |
| writel(val, base + SDM_MAC_ADRH); |
| |
| val = addr[2]; |
| val = (val << 8) | addr[3]; |
| val = (val << 8) | addr[4]; |
| val = (val << 8) | addr[5]; |
| writel(val, base + SDM_MAC_ADRL); |
| |
| return 0; |
| } |
| |
| static int mt7628_eth_send(struct udevice *dev, void *packet, int length) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| void __iomem *base = priv->base; |
| int ret; |
| int idx; |
| int i; |
| |
| idx = priv->tx_dma_idx; |
| |
| /* Pad message to a minimum length */ |
| if (length < PADDING_LENGTH) { |
| char *p = (char *)packet; |
| |
| for (i = 0; i < PADDING_LENGTH - length; i++) |
| p[length + i] = 0; |
| length = PADDING_LENGTH; |
| } |
| |
| /* Check if buffer is ready for next TX DMA */ |
| ret = wait_for_bit_le32(&priv->tx_ring[idx].txd2, TX_DMA_DONE, true, |
| CFG_TX_DMA_TIMEOUT, false); |
| if (ret) { |
| printf("TX: DMA still busy on buffer %d\n", idx); |
| return ret; |
| } |
| |
| flush_dcache_range((u32)packet, (u32)packet + length); |
| |
| priv->tx_ring[idx].txd1 = CPHYSADDR(packet); |
| priv->tx_ring[idx].txd2 &= ~TX_DMA_PLEN0; |
| priv->tx_ring[idx].txd2 |= FIELD_PREP(TX_DMA_PLEN0, length); |
| priv->tx_ring[idx].txd2 &= ~TX_DMA_DONE; |
| |
| idx = (idx + 1) % NUM_TX_DESC; |
| |
| /* Make sure the writes executed at this place */ |
| wmb(); |
| writel(idx, base + TX_CTX_IDX0); |
| |
| priv->tx_dma_idx = idx; |
| |
| return 0; |
| } |
| |
| static int mt7628_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| u32 rxd_info; |
| int length; |
| int idx; |
| |
| idx = priv->rx_dma_idx; |
| |
| rxd_info = priv->rx_ring[idx].rxd2; |
| if ((rxd_info & RX_DMA_DONE) == 0) |
| return -EAGAIN; |
| |
| length = FIELD_GET(RX_DMA_PLEN0, priv->rx_ring[idx].rxd2); |
| if (length == 0 || length > MTK_QDMA_PAGE_SIZE) { |
| printf("%s: invalid length (%d bytes)\n", __func__, length); |
| mt7628_eth_free_pkt(dev, NULL, 0); |
| return -EIO; |
| } |
| |
| *packetp = priv->rx_buf[idx]; |
| invalidate_dcache_range((u32)*packetp, (u32)*packetp + length); |
| |
| priv->rx_ring[idx].rxd4 = 0; |
| priv->rx_ring[idx].rxd2 = RX_DMA_LSO; |
| |
| /* Make sure the writes executed at this place */ |
| wmb(); |
| |
| return length; |
| } |
| |
| static int mt7628_eth_free_pkt(struct udevice *dev, uchar *packet, int length) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| void __iomem *base = priv->base; |
| int idx; |
| |
| idx = priv->rx_dma_idx; |
| |
| /* Move point to next RXD which wants to alloc */ |
| writel(idx, base + RX_CALC_IDX0); |
| |
| /* Update to Next packet point that was received */ |
| idx = (idx + 1) % NUM_RX_DESC; |
| |
| priv->rx_dma_idx = idx; |
| |
| return 0; |
| } |
| |
| static int mt7628_eth_start(struct udevice *dev) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| void __iomem *base = priv->base; |
| uchar packet[MTK_QDMA_PAGE_SIZE]; |
| uchar *packetp; |
| int ret; |
| int i; |
| |
| for (i = 0; i < NUM_RX_DESC; i++) { |
| memset((void *)&priv->rx_ring[i], 0, sizeof(priv->rx_ring[0])); |
| priv->rx_ring[i].rxd2 |= RX_DMA_LSO; |
| priv->rx_ring[i].rxd1 = CPHYSADDR(priv->rx_buf[i]); |
| } |
| |
| for (i = 0; i < NUM_TX_DESC; i++) { |
| memset((void *)&priv->tx_ring[i], 0, sizeof(priv->tx_ring[0])); |
| priv->tx_ring[i].txd2 = TX_DMA_LS0 | TX_DMA_DONE; |
| priv->tx_ring[i].txd4 = FIELD_PREP(TX_DMA_PN, 1); |
| } |
| |
| priv->rx_dma_idx = 0; |
| priv->tx_dma_idx = 0; |
| |
| /* Make sure the writes executed at this place */ |
| wmb(); |
| |
| /* disable delay interrupt */ |
| writel(0, base + DLY_INT_CFG); |
| |
| clrbits_le32(base + PDMA_GLO_CFG, 0xffff0000); |
| |
| /* Tell the adapter where the TX/RX rings are located. */ |
| writel(CPHYSADDR(&priv->rx_ring[0]), base + RX_BASE_PTR0); |
| writel(CPHYSADDR((u32)&priv->tx_ring[0]), base + TX_BASE_PTR0); |
| |
| writel(NUM_RX_DESC, base + RX_MAX_CNT0); |
| writel(NUM_TX_DESC, base + TX_MAX_CNT0); |
| |
| writel(priv->tx_dma_idx, base + TX_CTX_IDX0); |
| writel(RST_DTX_IDX0, base + PDMA_RST_IDX); |
| |
| writel(NUM_RX_DESC - 1, base + RX_CALC_IDX0); |
| writel(RST_DRX_IDX0, base + PDMA_RST_IDX); |
| |
| /* Make sure the writes executed at this place */ |
| wmb(); |
| eth_dma_start(priv); |
| |
| if (priv->phy) { |
| ret = phy_startup(priv->phy); |
| if (ret) |
| return ret; |
| |
| if (!priv->phy->link) |
| return -EAGAIN; |
| } |
| |
| /* |
| * The integrated switch seems to queue some received ethernet |
| * packets in some FIFO. Lets read the already queued packets |
| * out by using the receive routine, so that these old messages |
| * are dropped before the new xfer starts. |
| */ |
| packetp = &packet[0]; |
| while (mt7628_eth_recv(dev, 0, &packetp) != -EAGAIN) |
| mt7628_eth_free_pkt(dev, packetp, 0); |
| |
| return 0; |
| } |
| |
| static void mt7628_eth_stop(struct udevice *dev) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| |
| eth_dma_stop(priv); |
| } |
| |
| static int mt7628_eth_probe(struct udevice *dev) |
| { |
| struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| struct mii_dev *bus; |
| int poll_link_phy; |
| int ret; |
| int i; |
| |
| /* Save frame-engine base address for later use */ |
| priv->base = dev_remap_addr_index(dev, 0); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| /* Save switch base address for later use */ |
| priv->eth_sw_base = dev_remap_addr_index(dev, 1); |
| if (IS_ERR(priv->eth_sw_base)) |
| return PTR_ERR(priv->eth_sw_base); |
| |
| /* Reset controller */ |
| ret = reset_get_by_name(dev, "ephy", &priv->rst_ephy); |
| if (ret) { |
| pr_err("unable to find reset controller for ethernet PHYs\n"); |
| return ret; |
| } |
| |
| /* WAN port will be isolated from LAN ports */ |
| priv->wan_port = dev_read_u32_default(dev, "mediatek,wan-port", -1); |
| |
| /* Put rx and tx rings into KSEG1 area (uncached) */ |
| priv->tx_ring = (struct fe_tx_dma *) |
| KSEG1ADDR(memalign(ARCH_DMA_MINALIGN, |
| sizeof(*priv->tx_ring) * NUM_TX_DESC)); |
| priv->rx_ring = (struct fe_rx_dma *) |
| KSEG1ADDR(memalign(ARCH_DMA_MINALIGN, |
| sizeof(*priv->rx_ring) * NUM_RX_DESC)); |
| |
| for (i = 0; i < NUM_RX_DESC; i++) |
| priv->rx_buf[i] = memalign(PKTALIGN, MTK_QDMA_PAGE_SIZE); |
| |
| bus = mdio_alloc(); |
| if (!bus) { |
| printf("Failed to allocate MDIO bus\n"); |
| return -ENOMEM; |
| } |
| |
| bus->read = mt7628_mdio_read; |
| bus->write = mt7628_mdio_write; |
| snprintf(bus->name, sizeof(bus->name), dev->name); |
| bus->priv = (void *)priv; |
| |
| ret = mdio_register(bus); |
| if (ret) |
| return ret; |
| |
| poll_link_phy = dev_read_u32_default(dev, "mediatek,poll-link-phy", -1); |
| if (poll_link_phy >= 0) { |
| if (poll_link_phy >= NUM_PHYS) { |
| pr_err("invalid phy %d for poll-link-phy\n", |
| poll_link_phy); |
| return ret; |
| } |
| |
| priv->phy = phy_connect(bus, poll_link_phy, dev, |
| PHY_INTERFACE_MODE_MII); |
| if (!priv->phy) { |
| pr_err("failed to probe phy %d\n", poll_link_phy); |
| return -ENODEV; |
| } |
| |
| priv->phy->advertising = priv->phy->supported; |
| phy_config(priv->phy); |
| } |
| |
| /* Switch configuration */ |
| rt305x_esw_init(priv); |
| |
| return 0; |
| } |
| |
| static const struct eth_ops mt7628_eth_ops = { |
| .start = mt7628_eth_start, |
| .send = mt7628_eth_send, |
| .recv = mt7628_eth_recv, |
| .free_pkt = mt7628_eth_free_pkt, |
| .stop = mt7628_eth_stop, |
| .write_hwaddr = mt7628_eth_write_hwaddr, |
| }; |
| |
| static const struct udevice_id mt7628_eth_ids[] = { |
| { .compatible = "mediatek,mt7628-eth" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mt7628_eth) = { |
| .name = "mt7628_eth", |
| .id = UCLASS_ETH, |
| .of_match = mt7628_eth_ids, |
| .probe = mt7628_eth_probe, |
| .ops = &mt7628_eth_ops, |
| .priv_auto = sizeof(struct mt7628_eth_dev), |
| .plat_auto = sizeof(struct eth_pdata), |
| }; |