ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards

The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM,
32MB QSPI NOR flash and 256MB NAND flash.

The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC,
2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources
and a fan controller.

The "Florida" carrier boards add SD, USB, ethernet and other interfaces.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt b/board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt
new file mode 100644
index 0000000..7b102de
--- /dev/null
+++ b/board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt
@@ -0,0 +1,61 @@
+0xF8000120 0x1F000200 // ARM_CLK_CTRL - divisor = 2 (433 MHz)
+0xf8000700 0x1202     // MIO configuration
+0xf8000704 0x1202
+0xf8000708 0x202
+0xf800070c 0x202
+0xf8000710 0x202
+0xf8000714 0x202
+0xf8000718 0x202
+0xf800071c 0x200
+0xf8000720 0x202
+0xf8000724 0x202
+0xf8000728 0x202
+0xf800072c 0x202
+0xf8000730 0x202
+0xf8000734 0x202
+0xf8000738 0x12e1
+0xf800073c 0x12e0
+0xf8000740 0x1202
+0xf8000744 0x1202
+0xf8000748 0x1202
+0xf800074c 0x1202
+0xf8000750 0x1202
+0xf8000754 0x1202
+0xf8000758 0x1203
+0xf800075c 0x1203
+0xf8000760 0x1203
+0xf8000764 0x203
+0xf8000768 0x1203
+0xf800076c 0x203
+0xf8000770 0x304
+0xf8000774 0x305
+0xf8000778 0x304
+0xf800077c 0x305
+0xf8000780 0x304
+0xf8000784 0x304
+0xf8000788 0x304
+0xf800078c 0x304
+0xf8000790 0x305
+0xf8000794 0x304
+0xf8000798 0x304
+0xf800079c 0x304
+0xf80007a0 0x380
+0xf80007a4 0x380
+0xf80007a8 0x380
+0xf80007ac 0x380
+0xf80007b0 0x380
+0xf80007b4 0x380
+0xf80007b8 0x1200
+0xf80007bc 0x1201
+0xf80007c0 0x1240
+0xf80007c4 0x1240
+0xf80007c8 0x1240
+0xf80007cc 0x1240
+0xf80007d0 0x1280
+0xf80007d4 0x1280
+0xf8000830 0x2f0037
+0xf8000834 0x3a0039
+0xF800014C 0x00000621 // LQSPI_CLK_CTRL - ARMPLL/6
+0xE000D000 0x800238C1 // QSPI config - divide-by-2
+0xE000D038 0x00000020 // QSPI loopback - internal, 0 delay
+0xE000D0A0 0xE2FF06EB // LQSPI_CFG - Quad read, dual flash