commit 5a24f295bfc3b39fd3e13f728b31c1b49dbab79a
author Ye Li <ye.li@nxp.com> Wed Jun 15 10:53:01 2016 +0800
committer York Sun <york.sun@nxp.com> Tue Jun 28 12:08:53 2016 -0700
tree 38530fee427d50204ab35c1c181e2ca5744e4d5f
parent a6eadd5375f6fdb320c5ee06ba8493281c5d15d0

fsl_esdhc: Update clock enable bits for USDHC

The USDHC moves the 4 clock bits CARD_CLK_SOFT_EN, IPG_PERCLK_SOFT_EN,
HCLK_SOFT_EN, and IPG_CLK_SOFT_EN from sysctl register to vendorspec
register. The driver uses RSTA to replace the clock gate off
operation. But this is not a good solution because:
1. when using RSTA, we should wait this bit to clear by itself. This is not
   implemeneted in the code.
2. After RSTA is set, it is recommended that the Host Driver reset the
   external card and reinitialize it.

So in this patch, we change to use the vendorspec registers for these bits
operation.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

drivers/mmc/fsl_esdhc.c

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index bfbef66..c5f08ea 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -538,7 +538,7 @@
 	clk = (pre_div << 8) | (div << 4);
 
 #ifdef CONFIG_FSL_USDHC
-	esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
+	esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_CKEN);
 #else
 	esdhc_clrbits32(&regs->sysctl, SYSCTL_CKEN);
 #endif
@@ -548,7 +548,7 @@
 	udelay(10000);
 
 #ifdef CONFIG_FSL_USDHC
-	esdhc_clrbits32(&regs->sysctl, SYSCTL_RSTA);
+	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_PEREN | VENDORSPEC_CKEN);
 #else
 	esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
 #endif
@@ -643,6 +643,8 @@
 
 #ifndef CONFIG_FSL_USDHC
 	esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
+#else
+	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_HCKEN | VENDORSPEC_IPGEN);
 #endif
 
 	/* Set the initial clock speed */
@@ -740,6 +742,9 @@
 #ifndef CONFIG_FSL_USDHC
 	esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
 				| SYSCTL_IPGEN | SYSCTL_CKEN);
+#else
+	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_PEREN |
+			VENDORSPEC_HCKEN | VENDORSPEC_IPGEN | VENDORSPEC_CKEN);
 #endif
 
 	writel(SDHCI_IRQ_EN_BITS, &regs->irqstaten);