| // SPDX-License-Identifier: GPL-2.0 |
| #include "qcom-ipq8064.dtsi" |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| model = "MikroTik RB3011UiAS-RM"; |
| compatible = "mikrotik,rb3011", "qcom,ipq8064"; |
| |
| aliases { |
| serial0 = &gsbi7_serial; |
| ethernet0 = &gmac0; |
| ethernet1 = &gmac3; |
| mdio-gpio0 = &mdio0; |
| mdio-gpio1 = &mdio1; |
| }; |
| |
| chosen { |
| bootargs = "loglevel=8 console=ttyMSM0,115200"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-0 = <&buttons_pins>; |
| pinctrl-names = "default"; |
| |
| button { |
| label = "reset"; |
| linux,code = <KEY_RESTART>; |
| gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| debounce-interval = <60>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&leds_pins>; |
| pinctrl-names = "default"; |
| |
| led-0 { |
| label = "rb3011:green:user"; |
| color = <LED_COLOR_ID_GREEN>; |
| gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| memory@42000000 { |
| reg = <0x42000000 0x3e000000>; |
| device_type = "memory"; |
| }; |
| |
| mdio0: mdio-0 { |
| status = "okay"; |
| compatible = "virtual,mdio-gpio"; |
| gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, |
| <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-0 = <&mdio0_pins>; |
| pinctrl-names = "default"; |
| |
| switch0: switch@10 { |
| compatible = "qca,qca8337"; |
| |
| dsa,member = <0 0>; |
| |
| pinctrl-0 = <&sw0_reset_pin>; |
| pinctrl-names = "default"; |
| |
| reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; |
| reg = <0x10>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch0cpu: port@0 { |
| reg = <0>; |
| label = "cpu"; |
| ethernet = <&gmac0>; |
| phy-mode = "rgmii-id"; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| label = "sw1"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| label = "sw2"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| label = "sw3"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| label = "sw4"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| label = "sw5"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| mdio1: mdio-1 { |
| status = "okay"; |
| compatible = "virtual,mdio-gpio"; |
| gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, |
| <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-0 = <&mdio1_pins>; |
| pinctrl-names = "default"; |
| |
| switch1: switch@14 { |
| compatible = "qca,qca8337"; |
| |
| dsa,member = <1 0>; |
| |
| pinctrl-0 = <&sw1_reset_pin>; |
| pinctrl-names = "default"; |
| |
| reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; |
| reg = <0x10>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch1cpu: port@0 { |
| reg = <0>; |
| label = "cpu"; |
| ethernet = <&gmac3>; |
| phy-mode = "sgmii"; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| label = "sw6"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| label = "sw7"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| label = "sw8"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| label = "sw9"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| label = "sw10"; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_LAN; |
| default-state = "keep"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| soc { |
| gsbi5: gsbi@1a200000 { |
| qcom,mode = <GSBI_PROT_SPI>; |
| status = "okay"; |
| |
| spi4: spi@1a280000 { |
| status = "okay"; |
| |
| pinctrl-0 = <&spi_pins>; |
| pinctrl-names = "default"; |
| |
| cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; |
| |
| norflash: flash@0 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| |
| partition@0 { |
| label = "RouterBoot"; |
| reg = <0x0 0x40000>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &adm_dma { |
| status = "okay"; |
| }; |
| |
| &gmac0 { |
| status = "okay"; |
| |
| phy-mode = "rgmii"; |
| qcom,id = <0>; |
| phy-handle = <&switch0cpu>; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| &gmac3 { |
| status = "okay"; |
| |
| phy-mode = "sgmii"; |
| qcom,id = <3>; |
| phy-handle = <&switch1cpu>; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| &gsbi7 { |
| status = "okay"; |
| qcom,mode = <GSBI_PROT_I2C_UART>; |
| }; |
| |
| &gsbi7_serial { |
| status = "okay"; |
| }; |
| |
| &hs_phy_1 { |
| status = "okay"; |
| }; |
| |
| &nand { |
| status = "okay"; |
| |
| nand@0 { |
| reg = <0>; |
| |
| nand-ecc-strength = <4>; |
| nand-bus-width = <8>; |
| nand-ecc-step-size = <512>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot@0 { |
| label = "RouterBoard NAND 1 Boot"; |
| reg = <0x0000000 0x0800000>; |
| }; |
| |
| main@800000 { |
| label = "RouterBoard NAND 1 Main"; |
| reg = <0x0800000 0x7800000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &qcom_pinmux { |
| buttons_pins: buttons_pins { |
| mux { |
| pins = "gpio66"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| }; |
| |
| leds_pins: leds_pins { |
| mux { |
| pins = "gpio33"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| }; |
| |
| mdio1_pins: mdio1_pins { |
| mux { |
| pins = "gpio10", "gpio11"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| }; |
| |
| sw0_reset_pin: sw0_reset_pin { |
| mux { |
| pins = "gpio16"; |
| drive-strength = <16>; |
| function = "gpio"; |
| bias-disable; |
| input-disable; |
| }; |
| }; |
| |
| sw1_reset_pin: sw1_reset_pin { |
| mux { |
| pins = "gpio17"; |
| drive-strength = <16>; |
| function = "gpio"; |
| bias-disable; |
| input-disable; |
| }; |
| }; |
| |
| usb1_pwr_en_pins: usb1_pwr_en_pins { |
| mux { |
| pins = "gpio4"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| }; |
| |
| &ss_phy_1 { |
| status = "okay"; |
| }; |
| |
| &usb3_1 { |
| pinctrl-0 = <&usb1_pwr_en_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |