Cleanup of the monahans cpu and delta board port.
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 83ae5e3..a92a450 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -821,21 +821,21 @@
#define RTAR __REG(0x40900004) /* RTC Alarm Register */
#define RTSR __REG(0x40900008) /* RTC Status Register */
#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
-#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
-#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
-#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
-#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
-#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
-#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
-#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
-#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
+#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
+#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
+#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
+#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
+#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
+#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
+#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
+#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
+#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
-#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
-#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
+#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
+#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
@@ -921,9 +921,10 @@
#ifdef CONFIG_CPU_MONAHANS
#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
-/* Missing: 32 Interrupt priority registers */
-/* mk@tbd: These are the same as beneath for PXA27x: maybe can be
- * merged if GPIO Stuff is same too. */
+/* Missing: 32 Interrupt priority registers
+ * These are the same as beneath for PXA27x: maybe can be merged if
+ * GPIO Stuff is same too.
+ */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
@@ -983,24 +984,24 @@
#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
-#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
-#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
+#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
-#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
-#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
+#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
-#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
-#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
+#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
-#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
-#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
+#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3)
#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3)
@@ -1488,8 +1489,8 @@
#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
-#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
+#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
+#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
/*
* Power Manager
@@ -1709,10 +1710,10 @@
#define ACCR_13MEND2 (1 << 21)
#define ACCR_PCCE (1 << 11)
-#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
-#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
-#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
-#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
+#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
@@ -1720,27 +1721,27 @@
#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
-#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
-#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
-#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
-#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
-#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
-#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
-#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
-#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
-#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
-#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
-#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
-#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
+#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
+#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
+#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
+#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
+#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
+#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
+#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
+#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
-#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
-#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
+#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
-#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
+#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
+#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */
#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */
@@ -2382,16 +2383,16 @@
#define KPAS_SO (0x1 << 31)
#define KPASMKPx_SO (0x1 << 31)
-#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
-#define PSLR __REG(0x40F00034)
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
-#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
+#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
+#define PSLR __REG(0x40F00034)
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
+#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
#endif /* CONFIG_PXA27X */
diff --git a/include/configs/delta.h b/include/configs/delta.h
index f230b03..cb002f7 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -62,7 +62,7 @@
/*
* select serial console configuration
*/
-#define CONFIG_FFUART 1
+#define CONFIG_FFUART 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -168,8 +168,6 @@
#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define SECTORSIZE 512
-#define NAND_DELAY_US 25 /* mk@tbd: could be 0, I guess */
/* nand timeout values */
#define CFG_NAND_PROG_ERASE_TO 3000
@@ -178,16 +176,15 @@
#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */
/* NAND Timing Parameters (in ns) */
-#define NAND_TIMING_tCH 10
-#define NAND_TIMING_tCS 0
+#define NAND_TIMING_tCH 10
+#define NAND_TIMING_tCS 0
#define NAND_TIMING_tWH 20
-#define NAND_TIMING_tWP 40
+#define NAND_TIMING_tWP 40
-#define NAND_TIMING_tRH 20
-#define NAND_TIMING_tRP 40
+#define NAND_TIMING_tRH 20
+#define NAND_TIMING_tRP 40
-#define NAND_TIMING_tR 11123
-/* #define NAND_TIMING_tWHR 110 */
+#define NAND_TIMING_tR 11123
#define NAND_TIMING_tWHR 100
#define NAND_TIMING_tAR 10
@@ -199,87 +196,16 @@
#define CONFIG_MTD_DEBUG
#define CONFIG_MTD_DEBUG_VERBOSE 1
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
-#define CFG_NO_FLASH 1
-#ifndef CGF_NO_FLASH
-/* these are required by the environment code */
-#define PHYS_FLASH_1 CFG_NAND0_BASE /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64 MB */
-#define PHYS_FLASH_BANK_SIZE 0x04000000 /* 64 MB Banks */
-#define PHYS_FLASH_SECT_SIZE (SECTORSIZE*1024) /* KB sectors (x2) */
-#endif
-
-/*
- * GPIO settings
- */
-#define CFG_GPSR0_VAL 0x00008000
-#define CFG_GPSR1_VAL 0x00FC0382
-#define CFG_GPSR2_VAL 0x0001FFFF
-#define CFG_GPCR0_VAL 0x00000000
-#define CFG_GPCR1_VAL 0x00000000
-#define CFG_GPCR2_VAL 0x00000000
-#define CFG_GPDR0_VAL 0x0060A800
-#define CFG_GPDR1_VAL 0x00FF0382
-#define CFG_GPDR2_VAL 0x0001C000
-#define CFG_GAFR0_L_VAL 0x98400000
-#define CFG_GAFR0_U_VAL 0x00002950
-#define CFG_GAFR1_L_VAL 0x000A9558
-#define CFG_GAFR1_U_VAL 0x0005AAAA
-#define CFG_GAFR2_L_VAL 0xA0000000
-#define CFG_GAFR2_U_VAL 0x00000002
-
-#define CFG_PSSR_VAL 0x20
-
-/*
- * Memory settings
- */
-#define CFG_MSC0_VAL 0x23F223F2
-#define CFG_MSC1_VAL 0x3FF1A441
-#define CFG_MSC2_VAL 0x7FF97FF1
-#define CFG_MDCNFG_VAL 0x00001AC9
-#define CFG_MDREFR_VAL 0x00018018
-#define CFG_MDMRS_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CFG_MECR_VAL 0x00000000
-#define CFG_MCMEM0_VAL 0x00010504
-#define CFG_MCMEM1_VAL 0x00010504
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00010504
-#define CFG_MCIO0_VAL 0x00004715
-#define CFG_MCIO1_VAL 0x00004715
-
-#define _LED 0x08000010
-#define LED_BLANK 0x08000040
-
-/*
- * FLASH and environment organization
- */
-#ifndef CFG_NO_FLASH
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
-
-
-/* NOTE: many default partitioning schemes assume the kernel starts at the
- * second sector, not an environment. You have been warned!
- */
-#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE
-#endif /* #ifndef CFG_NO_FLASH */
+#define CFG_NO_FLASH 1
-/* #define CFG_ENV_IS_NOWHERE */
#define CFG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
#define CFG_ENV_OFFSET_REDUND 0x44000