imx6: remove not longer supported aristainetos boards
Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.
Adapt board code to remove stuff not needed anymore.
Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.
Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove
diff --git a/board/aristainetos/Kconfig b/board/aristainetos/Kconfig
index 2ad3dbd..d670025 100644
--- a/board/aristainetos/Kconfig
+++ b/board/aristainetos/Kconfig
@@ -1,39 +1,3 @@
-if TARGET_ARISTAINETOS2
-
-source "board/aristainetos/common/Kconfig"
-
-config SYS_BOARD
- default "aristainetos"
-
-config SYS_BOARD_VERSION
- default 2
-
-endif
-
-if TARGET_ARISTAINETOS2B
-
-source "board/aristainetos/common/Kconfig"
-
-config SYS_BOARD
- default "aristainetos"
-
-config SYS_BOARD_VERSION
- default 3
-
-endif
-
-if TARGET_ARISTAINETOS2BCSL
-
-source "board/aristainetos/common/Kconfig"
-
-config SYS_BOARD
- default "aristainetos"
-
-config SYS_BOARD_VERSION
- default 4
-
-endif
-
if TARGET_ARISTAINETOS2C
source "board/aristainetos/common/Kconfig"
diff --git a/board/aristainetos/MAINTAINERS b/board/aristainetos/MAINTAINERS
index b4ca7ab..1c3fb3a 100644
--- a/board/aristainetos/MAINTAINERS
+++ b/board/aristainetos/MAINTAINERS
@@ -3,34 +3,11 @@
S: Maintained
F: board/aristainetos/
F: include/configs/aristainetos2.h
-F: configs/aristainetos2_defconfig
-F: configs/aristainetos2b_defconfig
-F: configs/aristainetos2bcsl_defconfig
F: configs/aristainetos2c_defconfig
-F: arch/arm/dts/imx6qdl-aristainetos2.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_7.dts
-F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2_4.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_7.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2c_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
F: arch/arm/dts/imx6dl-aristainetos2c_7.dts
F: arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
+F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2c.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
index 1493112..6bfaaed 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -194,87 +194,6 @@
writel(reg, &iomux->gpr[3]);
}
-static void enable_spi_display(struct display_info_t const *dev)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- int reg;
- s32 timeout = 100000;
-
-#if defined(CONFIG_VIDEO_BMP_LOGO)
- rotate_logo(3); /* portrait display in landscape mode */
-#endif
-
- reg = readl(&ccm->cs2cdr);
-
- /* select pll 5 clock */
- reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
- | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
- writel(reg, &ccm->cs2cdr);
-
- /* set PLL5 to 197994996Hz */
- reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
- reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x21);
- reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
- reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
- writel(reg, &ccm->analog_pll_video);
-
- writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xfbf4),
- &ccm->analog_pll_video_num);
- writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xf4240),
- &ccm->analog_pll_video_denom);
-
- reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
- writel(reg, &ccm->analog_pll_video);
-
- while (timeout--)
- if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
- break;
- if (timeout < 0)
- printf("Warning: video pll lock timeout!\n");
-
- reg = readl(&ccm->analog_pll_video);
- reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
- reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
- writel(reg, &ccm->analog_pll_video);
-
- /* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
- reg = readl(&ccm->cs2cdr);
- reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
- | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
- reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
- | (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
- writel(reg, &ccm->cs2cdr);
-
- reg = readl(&ccm->cscmr2);
- reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
- writel(reg, &ccm->cscmr2);
-
- reg = readl(&ccm->chsccdr);
- reg |= (CHSCCDR_CLK_SEL_LDB_DI0
- << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
- reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK;
- reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET);
- reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK;
- reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
- writel(reg, &ccm->chsccdr);
-
- reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
- | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
- | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
- | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
- | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
- | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
- | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
- writel(reg, &iomux->gpr[2]);
-
- reg = readl(&iomux->gpr[3]);
- reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
- | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
- << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
- writel(reg, &iomux->gpr[3]);
-}
-
static void setup_display(void)
{
enable_ipu_clock();
@@ -331,25 +250,36 @@
setup_one_led("led_blue", LEDST_OFF);
}
-#define ARI_RESC_FMT "setenv rescue_reason setenv bootargs \\${bootargs}" \
- " rescueReason=%d "
-
static void aristainetos_run_rescue_command(int reason)
{
- char rescue_reason_command[80];
+ char rescue_reason_command[20];
- sprintf(rescue_reason_command, ARI_RESC_FMT, reason);
+ sprintf(rescue_reason_command, "setenv rreason %d", reason);
run_command(rescue_reason_command, 0);
}
-static int aristainetos_eeprom(void)
+static int aristainetos_bootmode_settings(void)
{
+ struct gpio_desc *desc;
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned int sbmr1 = readl(&psrc->sbmr1);
+ char *my_bootdelay;
+ char bootmode = 0;
+ int ret;
struct udevice *dev;
int off;
- int ret;
u8 data[0x10];
u8 rescue_reason;
+ /* jumper controlled reset of the environment */
+ ret = gpio_hog_lookup_name("env_reset", &desc);
+ if (!ret) {
+ if (dm_gpio_get_value(desc)) {
+ printf("\nReset u-boot environment (jumper)\n");
+ run_command("run default_env; saveenv; saveenv", 0);
+ }
+ }
+
off = fdt_path_offset(gd->fdt_blob, "eeprom0");
if (off < 0) {
printf("%s: No eeprom0 path offset\n", __func__);
@@ -366,37 +296,26 @@
if (ret)
return ret;
- ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, 6);
+ ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, sizeof(data));
if (ret) {
printf("%s: Could not read EEPROM\n", __func__);
return ret;
}
- if (strncmp((char *)&data[3], "ReScUe", 6) == 0) {
- rescue_reason = *(uint8_t *)&data[9];
- memset(&data[3], 0xff, 7);
- i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7);
- printf("\nBooting into Rescue System (EEPROM)\n");
- aristainetos_run_rescue_command(rescue_reason);
- run_command("run rescue_load_fit rescueboot", 0);
- } else if (strncmp((char *)data, "DeF", 3) == 0) {
+ /* software controlled reset of the environment (EEPROM magic) */
+ if (strncmp((char *)data, "DeF", 3) == 0) {
memset(data, 0xff, 3);
i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)data, 3);
- printf("\nClear u-boot environment (set back to defaults)\n");
+ printf("\nReset u-boot environment (EEPROM)\n");
run_command("run default_env; saveenv; saveenv", 0);
}
- return 0;
-};
-
-static void aristainetos_bootmode_settings(void)
-{
- struct gpio_desc *desc;
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned int sbmr1 = readl(&psrc->sbmr1);
- char *my_bootdelay;
- char bootmode = 0;
- int ret;
+ if (sbmr1 & 0x40) {
+ env_set("bootmode", "1");
+ printf("SD bootmode jumper set!\n");
+ } else {
+ env_set("bootmode", "0");
+ }
/*
* Check the boot-source. If booting from NOR Flash,
@@ -420,28 +339,27 @@
env_set("bootdelay", "-2");
}
- if (sbmr1 & 0x40) {
- env_set("bootmode", "1");
- printf("SD bootmode jumper set!\n");
- } else {
- env_set("bootmode", "0");
- }
-
- /* read out some jumper values*/
- ret = gpio_hog_lookup_name("env_reset", &desc);
- if (!ret) {
- if (dm_gpio_get_value(desc)) {
- printf("\nClear env (set back to defaults)\n");
- run_command("run default_env; saveenv; saveenv", 0);
- }
- }
+ /* jumper controlled boot of the rescue system */
ret = gpio_hog_lookup_name("boot_rescue", &desc);
if (!ret) {
if (dm_gpio_get_value(desc)) {
+ printf("\nBooting into Rescue System (jumper)\n");
aristainetos_run_rescue_command(16);
run_command("run rescue_xload_boot", 0);
}
}
+
+ /* software controlled boot of the rescue system (EEPROM magic) */
+ if (strncmp((char *)&data[3], "ReScUe", 6) == 0) {
+ rescue_reason = *(uint8_t *)&data[9];
+ memset(&data[3], 0xff, 7);
+ i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7);
+ printf("\nBooting into Rescue System (EEPROM)\n");
+ aristainetos_run_rescue_command(rescue_reason);
+ run_command("run rescue_xload_boot", 0);
+ }
+
+ return 0;
}
#if defined(CONFIG_DM_PMIC_DA9063)
@@ -497,15 +415,15 @@
int board_late_init(void)
{
int x, y;
+ int ret;
led_default_state();
splash_get_pos(&x, &y);
bmp_display((ulong)&bmp_logo_bitmap[0], x, y);
- aristainetos_bootmode_settings();
-
- /* eeprom work */
- aristainetos_eeprom();
+ ret = aristainetos_bootmode_settings();
+ if (ret)
+ return ret;
/* set board_type */
if (gd->board_type == BOARD_TYPE_4)
@@ -549,97 +467,9 @@
.vmode = FB_VMODE_NONINTERLACED
}
}
-#if ((CONFIG_SYS_BOARD_VERSION == 2) || \
- (CONFIG_SYS_BOARD_VERSION == 3) || \
- (CONFIG_SYS_BOARD_VERSION == 4) || \
- (CONFIG_SYS_BOARD_VERSION == 5))
- , {
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = NULL,
- .enable = enable_spi_display,
- .mode = {
- .name = "lg4573",
- .refresh = 57,
- .xres = 480,
- .yres = 800,
- .pixclock = 37037,
- .left_margin = 59,
- .right_margin = 10,
- .upper_margin = 15,
- .lower_margin = 15,
- .hsync_len = 10,
- .vsync_len = 15,
- .sync = FB_SYNC_EXT | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED
- }
- }
-#endif
};
size_t display_count = ARRAY_SIZE(displays);
-#if defined(CONFIG_MTD_RAW_NAND)
-iomux_v3_cfg_t nfc_pads[] = {
- MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_gpmi_nand(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* config gpmi nand iomux */
- imx_iomux_v3_setup_multiple_pads(nfc_pads,
- ARRAY_SIZE(nfc_pads));
-
- /* gate ENFC_CLK_ROOT clock first,before clk source switch */
- clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
-
- /* config gpmi and bch clock to 100 MHz */
- clrsetbits_le32(&mxc_ccm->cs2cdr,
- MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
- MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
- MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
- MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
- MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
- MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
-
- /* enable ENFC_CLK_ROOT clock */
- setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
-
- /* enable gpmi and bch clock gating */
- setbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
-
- /* enable apbh clock gating */
- setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-#else
-static void setup_gpmi_nand(void)
-{
-}
-#endif
-
int board_init(void)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
@@ -648,7 +478,6 @@
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
setup_board_gpio();
- setup_gpmi_nand();
setup_display();
/* GPIO_1 for USB_OTG_ID */
diff --git a/board/aristainetos/common/Kconfig b/board/aristainetos/common/Kconfig
index e26de51..945a2c4 100644
--- a/board/aristainetos/common/Kconfig
+++ b/board/aristainetos/common/Kconfig
@@ -2,10 +2,7 @@
int "select version of aristainetos board"
help
version of aristainetos board version
- 2 version 2
- 3 version 2b
- 4 version 2bcsl
- 5 version 2c
+ 5 version 2c and 2d
config SYS_I2C_MXC_I2C1
default y