spi: Zap CONFIG_HARD_SPI
In legacy CONFIG_HARD_SPI initalizing spi_init code, which
was removed during dm conversion cleanup.
So remove the dead instances of CONFIG_HARD_SPI, and related
code.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/README b/README
index a46c7c6..17d56b8 100644
--- a/README
+++ b/README
@@ -1932,14 +1932,6 @@
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
- CONFIG_HARD_SPI
-
- Enables a hardware SPI driver for general-purpose reads
- and writes. As with CONFIG_SOFT_SPI, the board configuration
- must define a list of chip-select function pointers.
- Currently supported on some MPC8xxx processors. For an
- example, see include/configs/mpc8349emds.h.
-
CONFIG_SYS_SPI_MXC_WAIT
Timeout for waiting until spi transfer completed.
default: (CONFIG_SYS_HZ/100) /* 10 ms */
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 849a69a..c9c9964 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -18,13 +18,6 @@
#define HWCONFIG_BUFFER_SIZE 256
#endif
-/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
-#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI)
-# ifndef CONFIG_HARD_SPI
-# define CONFIG_HARD_SPI
-# endif
-#endif
-
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 4ec0af4..d40ed37 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -273,7 +273,7 @@
iopd->dat |= SPI_CS_MASK;
}
-#endif /* CONFIG_HARD_SPI */
+#endif
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
diff --git a/board/ids/ids8313/ids8313.c b/board/ids/ids8313/ids8313.c
index a411d4e..d547af4 100644
--- a/board/ids/ids8313/ids8313.c
+++ b/board/ids/ids8313/ids8313.c
@@ -208,4 +208,4 @@
/* deactivate the spi_cs */
setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK);
}
-#endif /* CONFIG_HARD_SPI */
+#endif
diff --git a/common/board_f.c b/common/board_f.c
index 60634e5..a3e80ca 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -257,15 +257,6 @@
}
#endif
-#if defined(CONFIG_HARD_SPI)
-static int init_func_spi(void)
-{
- puts("SPI: ");
- puts("ready\n");
- return 0;
-}
-#endif
-
static int setup_mon_len(void)
{
#if defined(__ARM__) || defined(__MICROBLAZE__)
@@ -864,9 +855,6 @@
#if defined(CONFIG_VID) && !defined(CONFIG_SPL)
init_func_vid,
#endif
-#if defined(CONFIG_HARD_SPI)
- init_func_spi,
-#endif
announce_dram_init,
dram_init, /* configure available RAM banks */
#ifdef CONFIG_POST
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 11cb395..83d7745 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -102,7 +102,6 @@
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
-#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
#ifdef CONFIG_CMD_SPI
# define CONFIG_SYS_DSPI_CS2
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index f08896e..4b8ef38 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -151,7 +151,6 @@
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
-#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
#ifdef CONFIG_CMD_SPI
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 16becbd..87cdbae 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -116,7 +116,6 @@
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
-#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
#ifdef CONFIG_CMD_SPI
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 99b60d5..d41b7c4 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -142,7 +142,6 @@
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
-#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x13
#ifdef CONFIG_CMD_SPI
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 524a10f..86a1233 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -370,11 +370,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_BUS_NUM 1
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
#if defined(CONFIG_SPI_FLASH)
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index c9ed70c..eeb19a9 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -386,12 +386,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_EEPROM_BUS_NUM 1
-/*
- * eSPI - Enhanced SPI
- */
-
-#define CONFIG_HARD_SPI
-
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
index 423ecd7..1bbe9d9 100644
--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@@ -287,11 +287,6 @@
#define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
#define CONFIG_SYS_I2C_IDT6V49205B 0x69
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 4adcd95..1908d35b 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -182,10 +182,6 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#ifndef CONFIG_TRAILBLAZER
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 1c94bf9..f4d7172 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -35,7 +35,6 @@
#endif
#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI 1
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
diff --git a/include/configs/ds109.h b/include/configs/ds109.h
index c06f005..2c7928e 100644
--- a/include/configs/ds109.h
+++ b/include/configs/ds109.h
@@ -38,7 +38,6 @@
#endif
#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI 1
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 28124dd..7e4c497 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -159,7 +159,6 @@
*/
#define CONFIG_TSEC1
#define CONFIG_TSEC2
-#define CONFIG_HARD_SPI
/*
* NOR FLASH setup
@@ -274,15 +273,6 @@
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
/*
- * SPI setup
- */
-#ifdef CONFIG_HARD_SPI
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR 0x00000001
-#define CONFIG_SYS_GPIO1_DAT 0x00000001
-#endif
-
-/*
* Ethernet setup
*/
#ifdef CONFIG_TSEC1
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 7d84d16..4765764 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -43,7 +43,6 @@
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_HARD_SPI
#define CONFIG_DEFAULT_SPI_BUS 1
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 9e59e7a..4bb3621 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -143,7 +143,6 @@
/* SPI */
#ifdef CONFIG_CMD_SPI
-#define CONFIG_HARD_SPI
#define CONFIG_SPI_HALF_DUPLEX
#endif
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 9465fb4..459ecf3 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -576,11 +576,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
#if defined(CONFIG_SPI_FLASH)
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index d018c22..4f48370 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -214,11 +214,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
#if defined(CONFIG_PCI)
/*
* General PCI
diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h
index c408db8..33ddc67 100644
--- a/include/configs/stmark2.h
+++ b/include/configs/stmark2.h
@@ -66,7 +66,6 @@
#define CONFIG_CF_DSPI
#define CONFIG_SF_DEFAULT_SPEED 50000000
#define CONFIG_SERIAL_FLASH
-#define CONFIG_HARD_SPI
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 1
diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h
index 956f779..4e274bd 100644
--- a/include/configs/ts4800.h
+++ b/include/configs/ts4800.h
@@ -43,11 +43,6 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
/*
- * SPI Configs
- * */
-#define CONFIG_HARD_SPI /* puts SPI: ready */
-
-/*
* MMC Configs
* */
#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index abfb0ff..1404fd8 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -750,7 +750,6 @@
CONFIG_G_DNL_UMS_VENDOR_NUM
CONFIG_H264_FREQ
CONFIG_H8300
-CONFIG_HARD_SPI
CONFIG_HAS_ETH0
CONFIG_HAS_ETH1
CONFIG_HAS_ETH2