Merge branch 'master' of git://git.denx.de/u-boot-sunxi
diff --git a/Makefile b/Makefile
index 3561fb0..6869ac8 100644
--- a/Makefile
+++ b/Makefile
@@ -861,6 +861,10 @@
ALL-y += init_sp_bss_offset_check
endif
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+ALL-y += u-boot-with-dtb.bin
+endif
+
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
@@ -983,7 +987,8 @@
$(call if_changed,objcopy)
OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
- $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec)
+ $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
+ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
@@ -1207,6 +1212,18 @@
$(call if_changed,socboot)
endif
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
+ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
+ $(call if_changed,binman)
+
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
+OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
+u-boot-br.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+endif
+endif
+
# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
# the middle. This is handled by binman based on an image description in the
@@ -1301,8 +1318,12 @@
ifeq ($(ARCH),arm)
UBOOT_BINLOAD := u-boot.img
else
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+UBOOT_BINLOAD := u-boot-with-dtb.bin
+else
UBOOT_BINLOAD := u-boot.bin
endif
+endif
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
index f8300c7..0c1596f 100644
--- a/arch/arm/cpu/armv7/ls102xa/Makefile
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -10,7 +10,6 @@
obj-y += fsl_epu.o
obj-y += soc.o
-obj-$(CONFIG_SCSI_AHCI_PLAT) += ls102xa_sata.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
obj-$(CONFIG_SPL) += spl.o
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
index af413f8..bb169aa 100644
--- a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
+++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
@@ -73,6 +73,7 @@
* read, that is why we don't read it from register ippdexpcr1 itself.
*/
ippdexpcr1 = in_le32(&scfg->sparecr[7]);
+ out_be32(&rcpm->ippdexpcr1, ippdexpcr1);
if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 |
@@ -192,6 +193,9 @@
setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);
+ /* Disable QE */
+ setbits_be32(&gur->devdisr, CCSR_DEVDISR1_QE);
+
ls1_deepsleep_irq_cfg();
psci_v7_flush_dcache_all();
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
deleted file mode 100644
index c9fe752..0000000
--- a/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- */
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/immap_ls102xa.h>
-#include <ahci.h>
-#include <scsi.h>
-
-/* port register default value */
-#define AHCI_PORT_PHY_1_CFG 0xa003fffe
-#define AHCI_PORT_PHY_2_CFG 0x28183414
-#define AHCI_PORT_PHY_3_CFG 0x0e080e06
-#define AHCI_PORT_PHY_4_CFG 0x064a080b
-#define AHCI_PORT_PHY_5_CFG 0x2aa86470
-#define AHCI_PORT_TRANS_CFG 0x08000029
-
-#define SATA_ECC_REG_ADDR 0x20220520
-#define SATA_ECC_DISABLE 0x00020000
-
-int ls1021a_sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci = (void *)AHCI_BASE_ADDR;
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
- out_le32((void *)SATA_ECC_REG_ADDR, SATA_ECC_DISABLE);
-#endif
-
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
- out_le32(&ccsr_ahci->pp4c, AHCI_PORT_PHY_4_CFG);
- out_le32(&ccsr_ahci->pp5c, AHCI_PORT_PHY_5_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-
- ahci_init((void __iomem *)AHCI_BASE_ADDR);
- scsi_scan(false);
-
- return 0;
-}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 5d6f68a..91fdbad 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -29,6 +29,7 @@
ifneq ($(CONFIG_ARCH_LS1043A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
+obj-y += icid.o ls1043_ids.o
endif
ifneq ($(CONFIG_ARCH_LS1012A),)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 653c6dd..bc268e2 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -192,6 +192,16 @@
return get_bus_freq(0) / CONFIG_SYS_FSL_DSPI_CLK_DIV;
}
+#ifdef CONFIG_FSL_ESDHC
+int get_sdhc_freq(ulong dummy)
+{
+ if (!gd->arch.sdhc_clk)
+ get_clocks();
+
+ return gd->arch.sdhc_clk;
+}
+#endif
+
int get_serial_clock(void)
{
return get_bus_freq(0) / CONFIG_SYS_FSL_DUART_CLK_DIV;
@@ -202,6 +212,10 @@
switch (clk) {
case MXC_I2C_CLK:
return get_i2c_freq(0);
+#if defined(CONFIG_FSL_ESDHC)
+ case MXC_ESDHC_CLK:
+ return get_sdhc_freq(0);
+#endif
case MXC_DSPI_CLK:
return get_dspi_freq(0);
default:
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
new file mode 100644
index 0000000..0e86494
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+#include <fsl_sec.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+ SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+};
+#endif
+
+struct icid_id_table icid_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
+ SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
+#endif
+
+ SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
+
+ SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+ SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+ SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
+
+ SET_SATA_ICID("fsl,ls1043a-ahci", FSL_SATA_STREAM_ID),
+ SET_QDMA_ICID("fsl,ls1043a-qdma", FSL_QDMA_STREAM_ID),
+ SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+ SET_ETR_ICID(FSL_ETR_STREAM_ID),
+ SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+ SET_QE_ICID(FSL_QE_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+ SET_SEC_QI_ICID(FSL_DPAA1_STREAM_ID_START + 2),
+ SET_SEC_JR_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 3),
+ SET_SEC_JR_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 4),
+ SET_SEC_JR_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 5),
+ SET_SEC_JR_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 6),
+ SET_SEC_RTIC_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 7),
+ SET_SEC_RTIC_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 8),
+ SET_SEC_RTIC_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 9),
+ SET_SEC_RTIC_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 10),
+ SET_SEC_DECO_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 11),
+ SET_SEC_DECO_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 12),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct fman_icid_id_table fman_icid_tbl[] = {
+ /* port id, icid */
+ SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END),
+ SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END),
+};
+
+int fman_icid_tbl_sz = ARRAY_SIZE(fman_icid_tbl);
+#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index a31c4d9..d391f93 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -99,7 +99,7 @@
cnt = DIV_ROUND_UP(fdt_header_len, 512);
debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n",
__func__, dev, blk, cnt);
- ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
+ ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, fitp);
if (ret != cnt) {
free(fitp);
printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
@@ -123,7 +123,7 @@
blk = CONFIG_SYS_LS_PPA_ESBC_ADDR >> 9;
cnt = DIV_ROUND_UP(CONFIG_LS_PPA_ESBC_HDR_SIZE, 512);
- ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, ppa_hdr_ddr);
+ ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_hdr_ddr);
if (ret != cnt) {
free(ppa_hdr_ddr);
printf("MMC/SD read of PPA header failed\n");
@@ -149,8 +149,7 @@
cnt = DIV_ROUND_UP(fw_length, 512);
debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
__func__, dev, blk, cnt);
- ret = mmc->block_dev.block_read(&mmc->block_dev,
- blk, cnt, ppa_fit_addr);
+ ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_fit_addr);
if (ret != cnt) {
free(ppa_fit_addr);
printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 3f15cb0..54fb074 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -634,7 +634,7 @@
erratum_a008997();
erratum_a009007();
-#ifdef CONFIG_ARCH_LS1046A
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
set_icids();
#endif
}
diff --git a/arch/arm/dts/am3517-evm-u-boot.dtsi b/arch/arm/dts/am3517-evm-u-boot.dtsi
index c02beaa..59df819 100644
--- a/arch/arm/dts/am3517-evm-u-boot.dtsi
+++ b/arch/arm/dts/am3517-evm-u-boot.dtsi
@@ -10,10 +10,6 @@
};
};
-&mmc1 {
- cd-inverted;
-};
-
&uart1 {
reg-shift = <2>;
};
diff --git a/arch/arm/dts/at91-sama5d27_som1_ek.dts b/arch/arm/dts/at91-sama5d27_som1_ek.dts
index 5e62d4a..4cd6db6 100644
--- a/arch/arm/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/dts/at91-sama5d27_som1_ek.dts
@@ -54,6 +54,18 @@
stdout-path = &uart1;
};
+ onewire_tm: onewire {
+ gpios = <&pioA 17 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire_tm_default>;
+ status = "okay";
+
+ w1_eeprom: w1_eeprom@0 {
+ compatible = "maxim,ds24b33";
+ status = "okay";
+ };
+ };
+
ahb {
usb1: ohci@00400000 {
num-ports = <3>;
@@ -208,6 +220,11 @@
pinmux = <PIN_PA31__GPIO>;
bias-disable;
};
+
+ pinctrl_onewire_tm_default: onewire_tm_default {
+ pinmux = <PIN_PA17__GPIO>;
+ bias-pull-up;
+ };
};
};
};
diff --git a/arch/arm/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/dts/at91-sama5d2_ptc_ek.dts
index ab5ab21..068a117 100644
--- a/arch/arm/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/dts/at91-sama5d2_ptc_ek.dts
@@ -56,6 +56,18 @@
stdout-path = &uart0;
};
+ onewire_tm: onewire {
+ gpios = <&pioA PIN_PB31 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire_tm_default>;
+ status = "okay";
+
+ w1_eeprom: w1_eeprom@0 {
+ compatible = "maxim,ds24b33";
+ status = "okay";
+ };
+ };
+
ahb {
usb0: gadget@00300000 {
atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -208,6 +220,11 @@
pinmux = <PIN_PB11__GPIO>;
bias-disable;
};
+
+ pinctrl_onewire_tm_default: onewire_tm_default {
+ pinmux = <PIN_PB31__GPIO>;
+ bias-pull-up;
+ };
};
};
};
diff --git a/arch/arm/dts/at91-sama5d2_xplained.dts b/arch/arm/dts/at91-sama5d2_xplained.dts
index 01326a1..33064b3 100644
--- a/arch/arm/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/dts/at91-sama5d2_xplained.dts
@@ -11,6 +11,18 @@
stdout-path = &uart1;
};
+ onewire_tm: onewire {
+ gpios = <&pioA PIN_PB0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire_tm_default>;
+ status = "okay";
+
+ w1_eeprom: w1_eeprom@0 {
+ compatible = "maxim,ds24b33";
+ status = "okay";
+ };
+ };
+
ahb {
usb1: ohci@00400000 {
num-ports = <3>;
@@ -270,6 +282,11 @@
pinmux = <PIN_PA31__GPIO>;
bias-disable;
};
+
+ pinctrl_onewire_tm_default: onewire_tm_default {
+ pinmux = <PIN_PB0__GPIO>;
+ bias-pull-up;
+ };
};
};
};
diff --git a/arch/arm/dts/at91-sama5d3_xplained.dts b/arch/arm/dts/at91-sama5d3_xplained.dts
index 6959710..20fba5f 100644
--- a/arch/arm/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/dts/at91-sama5d3_xplained.dts
@@ -36,6 +36,18 @@
};
};
+ onewire_tm: onewire {
+ gpios = <&pioE 23 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire_tm_default>;
+ status = "okay";
+
+ w1_eeprom: w1_eeprom@0 {
+ compatible = "maxim,ds24b33";
+ status = "okay";
+ };
+ };
+
ahb {
apb {
mmc0: mmc@f0000000 {
@@ -243,6 +255,11 @@
atmel,pins =
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
};
+
+ pinctrl_onewire_tm_default: onewire_tm_default {
+ atmel,pins =
+ <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts
index ea35dc2..58a0e60 100644
--- a/arch/arm/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -58,6 +58,18 @@
stdout-path = &usart3;
};
+ onewire_tm: onewire {
+ gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire_tm_default>;
+ status = "okay";
+
+ w1_eeprom: w1_eeprom@0 {
+ compatible = "maxim,ds24b33";
+ status = "okay";
+ };
+ };
+
memory {
reg = <0x20000000 0x20000000>;
};
@@ -199,6 +211,10 @@
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
+ pinctrl_onewire_tm_default: onewire_tm_default {
+ atmel,pins =
+ <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
};
};
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
index addb9ab..3841aee 100644
--- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -174,3 +174,7 @@
&lpuart0 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index ff40122..bb70992 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -70,6 +70,14 @@
status = "disabled";
};
+ esdhc: esdhc@1560000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <0 62 0x4>;
+ big-endian;
+ bus-width = <4>;
+ };
+
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
@@ -279,5 +287,13 @@
ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
+
+ sata: sata@3200000 {
+ compatible = "fsl,ls1043a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 69 4>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 4acbaf7..7687d12 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -70,6 +70,14 @@
status = "disabled";
};
+ esdhc: esdhc@1560000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <0 62 0x4>;
+ big-endian;
+ bus-width = <4>;
+ };
+
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 077caf3..72d755a 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -74,6 +74,15 @@
reg-names = "QuadSPI", "QuadSPI-memory";
num-cs = <4>;
};
+
+ esdhc: esdhc@2140000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ little-endian;
+ bus-width = <4>;
+ };
+
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x2240000 0x0 0x20000>;
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index b0f8517..2d537ae 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -75,6 +75,14 @@
num-cs = <4>;
};
+ esdhc: esdhc@0 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ little-endian;
+ bus-width = <4>;
+ };
+
usb0: usb3@3100000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
diff --git a/arch/arm/dts/ls1021a-qds.dtsi b/arch/arm/dts/ls1021a-qds.dtsi
index fb1af15..47c128f 100644
--- a/arch/arm/dts/ls1021a-qds.dtsi
+++ b/arch/arm/dts/ls1021a-qds.dtsi
@@ -212,3 +212,7 @@
&uart1 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/ls1021a-twr.dtsi b/arch/arm/dts/ls1021a-twr.dtsi
index 63f2079..14e0cea 100644
--- a/arch/arm/dts/ls1021a-twr.dtsi
+++ b/arch/arm/dts/ls1021a-twr.dtsi
@@ -103,3 +103,7 @@
&uart1 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 5b3fc6a..7670a39 100644
--- a/arch/arm/dts/ls1021a.dtsi
+++ b/arch/arm/dts/ls1021a.dtsi
@@ -96,7 +96,6 @@
sdhci,auto-cmd12;
big-endian;
bus-width = <4>;
- status = "disabled";
};
scfg: scfg@1570000 {
@@ -404,5 +403,12 @@
ranges = <0x81000000 0x0 0x00000000 0x34020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x38000000 0x38000000 0x0 0x08000000>; /* non-prefetchable memory */
};
+
+ sata: sata@3200000 {
+ compatible = "fsl,ls1021a-ahci";
+ reg = <0x3200000 0x10000>;
+ interrupts = <0 101 4>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/dts/omap3-beagle-u-boot.dtsi b/arch/arm/dts/omap3-beagle-u-boot.dtsi
index 094f955..41beaf0 100644
--- a/arch/arm/dts/omap3-beagle-u-boot.dtsi
+++ b/arch/arm/dts/omap3-beagle-u-boot.dtsi
@@ -11,10 +11,6 @@
};
};
-&mmc1 {
- cd-inverted;
-};
-
&uart1 {
reg-shift = <2>;
};
diff --git a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi b/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
index 094f955..41beaf0 100644
--- a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
+++ b/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi
@@ -11,10 +11,6 @@
};
};
-&mmc1 {
- cd-inverted;
-};
-
&uart1 {
reg-shift = <2>;
};
diff --git a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi b/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
index 094f955..41beaf0 100644
--- a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
+++ b/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi
@@ -11,10 +11,6 @@
};
};
-&mmc1 {
- cd-inverted;
-};
-
&uart1 {
reg-shift = <2>;
};
diff --git a/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi b/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
index b09ce0e..de41131 100644
--- a/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
+++ b/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
@@ -11,10 +11,6 @@
};
};
-&mmc1 {
- cd-inverted;
-};
-
&uart1 {
reg-shift = <2>;
};
diff --git a/arch/arm/dts/omap3-evm-u-boot.dtsi b/arch/arm/dts/omap3-evm-u-boot.dtsi
index b09ce0e..de41131 100644
--- a/arch/arm/dts/omap3-evm-u-boot.dtsi
+++ b/arch/arm/dts/omap3-evm-u-boot.dtsi
@@ -11,10 +11,6 @@
};
};
-&mmc1 {
- cd-inverted;
-};
-
&uart1 {
reg-shift = <2>;
};
diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
index 6645a55..830251a 100644
--- a/arch/arm/dts/sama5d2.dtsi
+++ b/arch/arm/dts/sama5d2.dtsi
@@ -769,4 +769,9 @@
};
};
};
+
+ onewire_tm: onewire {
+ compatible = "w1-gpio";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
index ba707b0..7db66c5 100644
--- a/arch/arm/dts/sama5d3.dtsi
+++ b/arch/arm/dts/sama5d3.dtsi
@@ -1534,4 +1534,9 @@
};
};
};
+
+ onewire_tm: onewire {
+ compatible = "w1-gpio";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi
index 8072b8a..8875d7b 100644
--- a/arch/arm/dts/sama5d4.dtsi
+++ b/arch/arm/dts/sama5d4.dtsi
@@ -1913,4 +1913,9 @@
};
};
};
+
+ onewire_tm: onewire {
+ compatible = "w1-gpio";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 8a05148..bd4ca88 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -195,6 +195,7 @@
/* SoC related */
#ifdef CONFIG_ARCH_LS1043A
#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FSL_QMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 7
#define CONFIG_SYS_NUM_FM1_10GEC 1
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index a70c866..a3f473f 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -68,6 +68,10 @@
#define SET_DEBUG_ICID(streamid) \
SET_SCFG_ICID(NULL, streamid, debug_icid, 0)
+#define SET_QE_ICID(streamid) \
+ SET_SCFG_ICID("fsl,qe", streamid, qe_icid,\
+ QE_BASE_ADDR)
+
#define SET_QMAN_ICID(streamid) \
SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
offsetof(struct ccsr_qman, liodnr) + \
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index be0a6ae..8c10526 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -85,6 +85,8 @@
#define GPIO3_BASE_ADDR (CONFIG_SYS_IMMR + 0x1320000)
#define GPIO4_BASE_ADDR (CONFIG_SYS_IMMR + 0x1330000)
+#define QE_BASE_ADDR (CONFIG_SYS_IMMR + 0x1400000)
+
#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
#define EDMA_BASE_ADDR (CONFIG_SYS_IMMR + 0x01c00000)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index afea9b8..8d002da 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -35,6 +35,9 @@
* -DPAA2
* -u-boot will allocate a range of stream IDs to be used by the Management
* Complex for containers and will set these values in the MC DPC image.
+ * -u-boot will fixup the iommu-map property in the fsl-mc node in the
+ * device tree (see Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+ * for more info on the msi-map definition)
* -the MC is responsible for allocating and setting up 'isolation context
* IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
*
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 13a282f..137cd61 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -86,6 +86,8 @@
unsigned long freq_localbus;
};
+#define CCSR_DEVDISR1_QE 0x00000001
+
/* Device Configuration and Pin Control */
struct ccsr_gur {
u32 porsr1; /* POR status 1 */
@@ -389,33 +391,6 @@
u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
};
-
-
-/* AHCI (sata) register map */
-struct ccsr_ahci {
- u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
- u32 pcfg; /* port config */
- u32 ppcfg; /* port phy1 config */
- u32 pp2c; /* port phy2 config */
- u32 pp3c; /* port phy3 config */
- u32 pp4c; /* port phy4 config */
- u32 pp5c; /* port phy5 config */
- u32 paxic; /* port AXI config */
- u32 axicc; /* AXI cache control */
- u32 axipc; /* AXI PROT control */
- u32 ptc; /* port Trans Config */
- u32 pts; /* port Trans Status */
- u32 plc; /* port link config */
- u32 plc1; /* port link config1 */
- u32 plc2; /* port link config2 */
- u32 pls; /* port link status */
- u32 pls1; /* port link status1 */
- u32 pcmdc; /* port CMD config */
- u32 ppcs; /* port phy control status */
- u32 pberr; /* port 0/1 BIST error */
- u32 cmds; /* port 0/1 CMD status error */
-};
-
#define RCPM_POWMGTCSR 0x130
#define RCPM_POWMGTCSR_SERDES_PW 0x80000000
#define RCPM_POWMGTCSR_LPM20_REQ 0x00100000
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
deleted file mode 100644
index 3acc5af..0000000
--- a/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- */
-
-#ifndef __FSL_SATA_H_
-#define __FSL_SATA_H_
-
-int ls1021a_sata_init(void);
-#endif
diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h
index 42ce8dc..6d31cc4 100644
--- a/arch/arm/include/asm/omap_mmc.h
+++ b/arch/arm/include/asm/omap_mmc.h
@@ -68,7 +68,6 @@
struct mmc_config cfg;
struct hsmmc *base_addr;
struct mmc *mmc;
- bool cd_inverted;
u32 controller_flags;
const char *hw_rev;
};
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 69856c8..a6329dc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -151,6 +151,7 @@
bool "SAMA5D2 PTC EK board"
select BOARD_EARLY_INIT_F
select SAMA5D2
+ select BOARD_LATE_INIT
config TARGET_SAMA5D2_XPLAINED
bool "SAMA5D2 Xplained board"
@@ -177,6 +178,7 @@
select BOARD_EARLY_INIT_F
select SAMA5D3
select SUPPORT_SPL
+ select BOARD_LATE_INIT
config TARGET_SAMA5D3XEK
bool "SAMA5D3X-EK board"
diff --git a/arch/arm/mach-davinci/da850_lowlevel.c b/arch/arm/mach-davinci/da850_lowlevel.c
index 95dc93a..822e0dc 100644
--- a/arch/arm/mach-davinci/da850_lowlevel.c
+++ b/arch/arm/mach-davinci/da850_lowlevel.c
@@ -288,10 +288,10 @@
/* GPIO setup */
board_gpio_init();
-
+#if !CONFIG_IS_ENABLED(DM_SERIAL)
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
+#endif
/*
* Fix Power and Emulation Management Register
* see sprufw3a.pdf page 37 Table 24
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8faef0b..c727d91 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -20,6 +20,7 @@
select CREATE_ARCH_SYMLINK
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
+ select BINMAN
imply CMD_HASH
imply CMD_IRQ
imply USB_EHCI_HCD if USB
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 19e8d02..7d139ff 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1143,6 +1143,10 @@
imply CMD_REGINFO
imply FSL_SATA
+config MPC85XX_HAVE_RESET_VECTOR
+ bool "Indicate reset vector at CONFIG_RESET_VECTOR_ADDRESS - 0xffc"
+ depends on MPC85xx
+
config BOOKE
bool
default y
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
index 6db6da1..75b0285 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
@@ -74,6 +74,7 @@
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
+ _end = .;
.bootpg ADDR(.text) - 0x1000 :
{
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
index 8588d7c..a2193bf 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
@@ -42,6 +42,7 @@
. = ALIGN(8);
__init_begin = .;
__init_end = .;
+ _end = .;
#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
.bootpg ADDR(.text) + 0x1000 :
{
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index 0495182..6dc8d99 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -55,6 +55,7 @@
. = ALIGN(8);
__init_begin = .;
__init_end = .;
+ _end = .;
#ifdef CONFIG_SPL_SKIP_RELOCATE
. = ALIGN(4);
__bss_start = .;
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index 14c31be..22bbac5 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -81,6 +81,7 @@
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
+ _end = .;
#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
.bootpg ADDR(.text) - 0x1000 :
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
new file mode 100644
index 0000000..a19aa56
--- /dev/null
+++ b/arch/powerpc/dts/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb
+
+targets += $(dtb-y)
+
+# Add any required device tree compiler flags here
+DTC_FLAGS +=
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
diff --git a/arch/powerpc/dts/e6500_power_isa.dtsi b/arch/powerpc/dts/e6500_power_isa.dtsi
new file mode 100644
index 0000000..1b06170
--- /dev/null
+++ b/arch/powerpc/dts/e6500_power_isa.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * e6500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+/ {
+ cpus {
+ power-isa-version = "2.06";
+ power-isa-b; // Base
+ power-isa-e; // Embedded
+ power-isa-atb; // Alternate Time Base
+ power-isa-cs; // Cache Specification
+ power-isa-ds; // Decorated Storage
+ power-isa-e.ed; // Embedded.Enhanced Debug
+ power-isa-e.pd; // Embedded.External PID
+ power-isa-e.hv; // Embedded.Hypervisor
+ power-isa-e.le; // Embedded.Little-Endian
+ power-isa-e.pm; // Embedded.Performance Monitor
+ power-isa-e.pc; // Embedded.Processor Control
+ power-isa-ecl; // Embedded Cache Locking
+ power-isa-exp; // External Proxy
+ power-isa-fp; // Floating Point
+ power-isa-fp.r; // Floating Point.Record
+ power-isa-mmc; // Memory Coherence
+ power-isa-scpm; // Store Conditional Page Mobility
+ power-isa-wt; // Wait
+ power-isa-64; // 64-bit
+ power-isa-e.pt; // Embedded.Page Table
+ power-isa-e.hv.lrat; // Embedded.Hypervisor.LRAT
+ power-isa-e.em; // Embedded Multi-Threading
+ power-isa-v; // Vector (AltiVec)
+ fsl,eref-er; // Enhanced Reservations
+ fsl,eref-deo; // Data Cache Extended Operations
+ mmu-type = "power-embedded";
+ };
+};
diff --git a/arch/powerpc/dts/t2080.dtsi b/arch/powerpc/dts/t2080.dtsi
new file mode 100644
index 0000000..db65ea5
--- /dev/null
+++ b/arch/powerpc/dts/t2080.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e6500@0 {
+ device_type = "cpu";
+ reg = <0 1>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu1: PowerPC,e6500@2 {
+ device_type = "cpu";
+ reg = <2 3>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu2: PowerPC,e6500@4 {
+ device_type = "cpu";
+ reg = <4 5>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu3: PowerPC,e6500@6 {
+ device_type = "cpu";
+ reg = <6 7>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/dts/t2080qds.dts b/arch/powerpc/dts/t2080qds.dts
new file mode 100644
index 0000000..1819a08
--- /dev/null
+++ b/arch/powerpc/dts/t2080qds.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * T2080QDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+/include/ "t2080.dtsi"
+
+/ {
+ model = "fsl,T2080QDS";
+ compatible = "fsl,T2080QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+};
diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi
new file mode 100644
index 0000000..213d543
--- /dev/null
+++ b/arch/powerpc/dts/u-boot.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <config.h>
+
+/ {
+ binman {
+ filename = "u-boot-with-dtb.bin";
+ skip-at-start = <CONFIG_SYS_TEXT_BASE>;
+ sort-by-offset;
+ pad-byte = <0xff>;
+ size = <CONFIG_SYS_MONITOR_LEN>;
+
+ u-boot-with-ucode-ptr {
+ offset = <CONFIG_SYS_TEXT_BASE>;
+ optional-ucode;
+ };
+
+ u-boot-dtb-with-ucode {
+#ifdef CONFIG_MPC85xx
+ align = <256>;
+#endif
+ };
+#ifdef CONFIG_MPC85XX_HAVE_RESET_VECTOR
+ powerpc-mpc85xx-bootpg-resetvec {
+ offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
+ };
+#endif
+ };
+};
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 6ac37f1..1aa0f8e 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -153,6 +153,7 @@
pinctrl {
compatible = "sandbox,pinctrl";
+ status = "okay";
pinctrl_i2c0: i2c0 {
groups = "i2c";
@@ -164,6 +165,12 @@
groups = "serial_a";
function = "serial";
};
+
+ pinctrl_onewire0: onewire0 {
+ groups = "w1";
+ function = "w1";
+ bias-pull-up;
+ };
};
reset@1 {
@@ -322,6 +329,19 @@
reg = <0x0 0x400>;
};
};
+
+ onewire0: onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio_a 8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire0>;
+ status = "okay";
+
+ sandbox_eeprom0: sandbox_eeprom@0 {
+ compatible = "sandbox,w1-eeprom";
+ status = "okay";
+ };
+ };
};
#include "cros-ec-keyboard.dtsi"
diff --git a/board/atmel/common/board.c b/board/atmel/common/board.c
index 650eb22..8f9b5e1 100644
--- a/board/atmel/common/board.c
+++ b/board/atmel/common/board.c
@@ -5,7 +5,64 @@
*/
#include <common.h>
+#include <w1.h>
+#include <w1-eeprom.h>
+#include <dm/device-internal.h>
+
+#define AT91_PDA_EEPROM_ID_OFFSET 15
+#define AT91_PDA_EEPROM_ID_LENGTH 5
+#define AT91_PDA_EEPROM_DEFAULT_BUS 0
void dummy(void)
{
}
+
+#if defined CONFIG_W1
+void at91_pda_detect(void)
+{
+ struct udevice *bus, *dev;
+ u8 buf[AT91_PDA_EEPROM_ID_LENGTH + 1] = {0};
+ int ret;
+ int pda = 0;
+
+ ret = w1_get_bus(AT91_PDA_EEPROM_DEFAULT_BUS, &bus);
+ if (ret)
+ return;
+
+ for (device_find_first_child(bus, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ ret = device_probe(dev);
+ if (ret) {
+ continue;
+ } else {
+ ret = w1_eeprom_read_buf(dev, AT91_PDA_EEPROM_ID_OFFSET,
+ (u8 *)buf, AT91_PDA_EEPROM_ID_LENGTH);
+ if (ret)
+ return;
+ break;
+ }
+ }
+ pda = simple_strtoul((const char *)buf, NULL, 10);
+
+ switch (pda) {
+ case 7000:
+ if (buf[4] == 'B')
+ printf("PDA TM7000B detected\n");
+ else
+ printf("PDA TM7000 detected\n");
+ break;
+ case 4300:
+ printf("PDA TM4300 detected\n");
+ break;
+ case 5000:
+ printf("PDA TM5000 detected\n");
+ break;
+ }
+ env_set("pda", (const char *)buf);
+}
+#else
+void at91_pda_detect(void)
+{
+}
+#endif
diff --git a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
index d5ddf8d..8363434 100644
--- a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
+++ b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
@@ -15,6 +15,8 @@
#include <asm/arch/gpio.h>
#include <asm/arch/sama5d2.h>
+extern void at91_pda_detect(void);
+
DECLARE_GLOBAL_DATA_PTR;
static void board_usb_hw_init(void)
@@ -28,6 +30,7 @@
#ifdef CONFIG_DM_VIDEO
at91_video_show_board_info();
#endif
+ at91_pda_detect();
return 0;
}
#endif
diff --git a/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c
index 789841e..17e08fa 100644
--- a/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c
+++ b/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c
@@ -20,6 +20,8 @@
#include <asm/arch/sama5d2.h>
#include <asm/arch/sama5d2_smc.h>
+extern void at91_pda_detect(void);
+
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_ATMEL
@@ -65,6 +67,14 @@
}
#endif
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ at91_pda_detect();
+ return 0;
+}
+#endif
+
static void board_usb_hw_init(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 12, ATMEL_PIO_PUEN_MASK);
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 592b4d8..fccd80e 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -15,6 +15,8 @@
#include <asm/arch/gpio.h>
#include <asm/arch/sama5d2.h>
+extern void at91_pda_detect(void);
+
DECLARE_GLOBAL_DATA_PTR;
static void board_usb_hw_init(void)
@@ -28,6 +30,7 @@
#ifdef CONFIG_DM_VIDEO
at91_video_show_board_info();
#endif
+ at91_pda_detect();
return 0;
}
#endif
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
index c47f638..289f8d8 100644
--- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -18,6 +18,8 @@
DECLARE_GLOBAL_DATA_PTR;
+extern void at91_pda_detect(void);
+
#ifdef CONFIG_NAND_ATMEL
void sama5d3_xplained_nand_hw_init(void)
{
@@ -72,6 +74,14 @@
}
#endif
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ at91_pda_detect();
+ return 0;
+}
+#endif
+
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 526c6c7..4da6489 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -17,6 +17,8 @@
DECLARE_GLOBAL_DATA_PTR;
+extern void at91_pda_detect(void);
+
#ifdef CONFIG_NAND_ATMEL
static void sama5d4_xplained_nand_hw_init(void)
{
@@ -71,6 +73,7 @@
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
+ at91_pda_detect();
#ifdef CONFIG_DM_VIDEO
at91_video_show_board_info();
#endif
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 315da8b..5db1027 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -24,11 +24,15 @@
static inline int get_board_version(void)
{
- struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR);
- int val;
+ uint32_t val;
+#ifdef CONFIG_TARGET_LS1012AFRDM
+ val = 0;
+#else
+ struct ccsr_gpio *pgpio = (void *)(GPIO2_BASE_ADDR);
- val = in_be32(&pgpio->gpdat);
+ val = in_be32(&pgpio->gpdat) & BOARD_REV_MASK;/*Get GPIO2 11,12,14*/
+#endif
return val;
}
@@ -46,11 +50,11 @@
puts("Version");
switch (rev) {
- case BOARD_REV_A:
- puts(": RevA ");
+ case BOARD_REV_A_B:
+ puts(": RevA/B ");
break;
- case BOARD_REV_B:
- puts(": RevB ");
+ case BOARD_REV_C:
+ puts(": RevC ");
break;
default:
puts(": unknown");
@@ -100,7 +104,7 @@
#ifdef CONFIG_TARGET_LS1012AFRWY
board_rev = get_board_version();
- if (board_rev & BOARD_REV_B) {
+ if (board_rev == BOARD_REV_C) {
mparam.mdctl = 0x05180000;
gd->ram_size = SYS_SDRAM_SIZE_1024;
} else {
diff --git a/board/freescale/ls1021aiot/ls1021aiot.c b/board/freescale/ls1021aiot/ls1021aiot.c
index a691dab..fb05b55 100644
--- a/board/freescale/ls1021aiot/ls1021aiot.c
+++ b/board/freescale/ls1021aiot/ls1021aiot.c
@@ -11,7 +11,6 @@
#include <asm/arch/ls102xa_devdis.h>
#include <asm/arch/ls102xa_soc.h>
-#include <asm/arch/ls102xa_sata.h>
#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <fsl_immap.h>
@@ -206,10 +205,6 @@
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- ls1021a_sata_init();
-#endif
-
return 0;
}
#endif
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 6722cad..c828dac 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -11,7 +11,6 @@
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/ls102xa_soc.h>
#include <asm/arch/ls102xa_devdis.h>
-#include <asm/arch/ls102xa_sata.h>
#include <hwconfig.h>
#include <mmc.h>
#include <fsl_csu.h>
@@ -362,9 +361,6 @@
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- ls1021a_sata_init();
-#endif
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 863bf76..dcd6d93 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -11,7 +11,6 @@
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/ls102xa_devdis.h>
#include <asm/arch/ls102xa_soc.h>
-#include <asm/arch/ls102xa_sata.h>
#include <hwconfig.h>
#include <mmc.h>
#include <fsl_csu.h>
@@ -556,9 +555,6 @@
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- ls1021a_sata_init();
-#endif
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 4fba572..44cc509 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -14,6 +14,7 @@
#include <asm/arch/fdt.h>
#include <asm/arch/mmu.h>
#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include <ahci.h>
#include <hwconfig.h>
#include <mmc.h>
@@ -353,6 +354,8 @@
fdt_fixup_board_enet(blob);
#endif
+ fdt_fixup_icid(blob);
+
reg = QIXIS_READ(brdcfg[0]);
reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index e7d8650..f31f0ec 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -9,6 +9,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include <fdt_support.h>
#include <hwconfig.h>
#include <ahci.h>
@@ -177,6 +178,8 @@
fdt_fixup_fman_ethernet(blob);
#endif
+ fdt_fixup_icid(blob);
+
/*
* qe-hdlc and usb multi-use the pins,
* when set hwconfig to qe-hdlc, delete usb node.
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index a0dab6f..517a8ce 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -575,6 +575,8 @@
fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
fsl_fdt_fixup_flash(blob);
#ifdef CONFIG_FSL_MC_ENET
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 75014fd..698ae1f 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -127,6 +127,8 @@
fdt_fixup_memory_banks(blob, base, size, 2);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
fdt_fixup_board_enet(blob);
#endif
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index c811e99..d336ef8 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -332,6 +332,8 @@
fdt_fixup_memory_banks(blob, base, size, 2);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
fsl_fdt_fixup_dr_usb(blob, bd);
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 46b18cf..cf91bc3 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -394,6 +394,8 @@
fdt_fixup_memory_banks(blob, base, size, 2);
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
+
fsl_fdt_fixup_dr_usb(blob, bd);
fsl_fdt_fixup_flash(blob);
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index 2a2a0e5..d690857 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -272,3 +272,22 @@
For more details, please refer to T2080QDS User Guide and access
website www.freescale.com and Freescale QorIQ SDK Infocenter document.
+
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for t2080qds for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="t2080qds" (Change default device tree name if required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+ CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig,
+1. use 'u-boot-with-dtb.bin' for NOR boot.
+2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 620423b..48d8869 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -331,13 +331,6 @@
#endif
#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_MMC)
void board_mmc_power_init(void)
{
twl4030_power_mmc_init(0);
diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h
index a5601f7..aeb26b9 100644
--- a/board/logicpd/omap3som/omap3logic.h
+++ b/board/logicpd/omap3som/omap3logic.h
@@ -131,145 +131,18 @@
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)); /*GPIO_64*/
MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)); /*GPMC_WAIT3*/
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)); /*CAM_HS */
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)); /*CAM_VS */
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)); /*CAM_XCLKA*/
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)); /*CAM_PCLK*/
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)); /*GPIO_98*/
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)); /*CAM_D0*/
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)); /*CAM_D1*/
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)); /*CAM_D2*/
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)); /*CAM_D3*/
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)); /*CAM_D4*/
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)); /*CAM_D5*/
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)); /*CAM_D6*/
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)); /*CAM_D7*/
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)); /*CAM_D8*/
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)); /*CAM_D9*/
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)); /*CAM_D10*/
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)); /*CAM_D11*/
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)); /*CAM_XCLKB*/
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)); /*GPIO_167*/
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)); /*CAM_STROBE*/
-
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)); /*CSI2_DX0*/
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)); /*CSI2_DY0*/
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)); /*CSI2_DX1*/
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)); /*CSI2_DY1*/
-
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)); /*McBSP2_FSX*/
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)); /*McBSP2_CLKX*/
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)); /*McBSP2_DR*/
- MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)); /*McBSP2_DX*/
-
MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); /*MMC1_CLK*/
MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); /*MMC1_CMD*/
MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); /*MMC1_DAT0*/
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)); /*MMC1_DAT4*/
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)); /*MMC1_DAT5*/
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)); /*MMC1_DAT6*/
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)); /*MMC1_DAT7*/
-
- MUX_VAL(CP(MMC2_CLK), (IEN | PTD | DIS | M0)); /*MMC2_CLK*/
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)); /*MMC2_CMD*/
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)); /*MMC2_DAT0*/
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)); /*MMC2_DAT1*/
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)); /*MMC2_DAT2*/
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)); /*MMC2_DAT3*/
- MUX_VAL(CP(MMC2_DAT4), (IDIS | PTD | DIS | M0)); /*MMC2_DAT4*/
- MUX_VAL(CP(MMC2_DAT5), (IDIS | PTD | DIS | M0)); /*MMC2_DAT5*/
- MUX_VAL(CP(MMC2_DAT6), (IDIS | PTD | DIS | M0)); /*MMC2_DAT6 */
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)); /*MMC2_DAT7*/
-
- MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)); /*McBSP3_DX*/
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)); /*McBSP3_DR*/
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)); /*McBSP3_CLKX*/
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)); /*McBSP3_FSX*/
-
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)); /*UART2_CTS*/
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)); /*UART2_RTS*/
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)); /*UART2_TX*/
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)); /*UART2_RX*/
MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)); /*UART1_TX*/
MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)); /*UART1_RTS*/
MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)); /*UART1_CTS*/
MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)); /*UART1_RX*/
- MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
- MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)); /*GPIO_153*/
-
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)); /*MCBSP1_CLKR*/
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)); /*MCBSP1_FSR*/
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)); /*MCBSP1_DX*/
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)); /*MCBSP1_DR*/
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)); /*MCBSP_CLKS*/
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)); /*MCBSP1_FSX*/
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)); /*MCBSP1_CLKX*/
-
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)); /*UART3_CTS_*/
- MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)); /*UART3_RTS_SD */
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); /*UART3_RX_IRRX*/
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); /*UART3_TX_IRTX*/
-
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)); /*HSUSB0_CLK*/
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)); /*HSUSB0_STP*/
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)); /*HSUSB0_DIR*/
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)); /*HSUSB0_NXT*/
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA0*/
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA1*/
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA2*/
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA3*/
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA4*/
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA5*/
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA6*/
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA7*/
-
- MUX_VAL(CP(I2C1_SCL), (IEN | EN | M0)); /*I2C1_SCL*/
- MUX_VAL(CP(I2C1_SDA), (IEN | EN | M0)); /*I2C1_SDA*/
-
- MUX_VAL(CP(I2C2_SCL), (IEN | EN | M0)); /*I2C2_SCL*/
- MUX_VAL(CP(I2C2_SDA), (IEN | EN | M0)); /*I2C2_SDA*/
-
- MUX_VAL(CP(I2C3_SCL), (IEN | EN | M0)); /*I2C3_SCL*/
- MUX_VAL(CP(I2C3_SDA), (IEN | EN | M0)); /*I2C3_SDA*/
-
- MUX_VAL(CP(I2C4_SCL), (IEN | EN | M0)); /*I2C4_SCL*/
- MUX_VAL(CP(I2C4_SDA), (IEN | EN | M0)); /*I2C4_SDA*/
-
- MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)); /*HDQ_SIO*/
-
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)); /*McSPI1_CLK*/
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)); /*McSPI1_SIMO */
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)); /*McSPI1_SOMI */
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)); /*McSPI1_CS0*/
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)); /*GPIO_175*/
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)); /*GPIO_176*/
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)); /*McSPI1_CS3*/
-
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)); /*McSPI2_CLK*/
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)); /*McSPI2_SIMO*/
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)); /*McSPI2_SOMI*/
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)); /*McSPI2_CS0*/
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)); /*McSPI2_CS1*/
-
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)); /*SYS_32K*/
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)); /*SYS_CLKREQ*/
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); /*SYS_nIRQ*/
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)); /*GPIO_2*/
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)); /*GPIO_3 */
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)); /*GPIO_4*/
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)); /*GPIO_5*/
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)); /*GPIO_6*/
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)); /*GPIO_7*/
-
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*SYS_OFF_MODE*/
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*SYS_CLKOUT1*/
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)); /*SYS_CLKOUT2*/
-
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/
diff --git a/cmd/Kconfig b/cmd/Kconfig
index cf97a0f..ae697fc 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -304,11 +304,6 @@
help
Extract a part of a multi-image.
-config CMD_POWEROFF
- bool "poweroff"
- help
- Poweroff/Shutdown the system
-
config CMD_SPL
bool "spl export - Export boot information for Falcon boot"
depends on SPL
@@ -832,6 +827,13 @@
help
I2C support.
+config CMD_W1
+ depends on W1
+ default y if W1
+ bool "w1 - Support for Dallas 1-Wire protocol"
+ help
+ Dallas 1-wire protocol support
+
config CMD_LOADB
bool "loadb"
default y
@@ -937,6 +939,11 @@
about 1990. These devices are typically removable memory or network
cards using a standard 68-pin connector.
+config CMD_POWEROFF
+ bool "poweroff"
+ help
+ Poweroff/Shutdown the system
+
config CMD_READ
bool "read - Read binary data from a partition"
help
diff --git a/cmd/Makefile b/cmd/Makefile
index d3815ab..9e311a7 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -146,6 +146,7 @@
obj-$(CONFIG_CMD_XIMG) += ximg.o
obj-$(CONFIG_CMD_YAFFS2) += yaffs2.o
obj-$(CONFIG_CMD_SPL) += spl.o
+obj-$(CONFIG_CMD_W1) += w1.o
obj-$(CONFIG_CMD_ZIP) += zip.o
obj-$(CONFIG_CMD_ZFS) += zfs.o
diff --git a/cmd/ubi.c b/cmd/ubi.c
index 913f0f7..0fa7553 100644
--- a/cmd/ubi.c
+++ b/cmd/ubi.c
@@ -47,8 +47,7 @@
static struct selected_dev ubi_dev;
#ifdef CONFIG_CMD_UBIFS
-int ubifs_is_mounted(void);
-void cmd_ubifs_umount(void);
+#include <ubifs_uboot.h>
#endif
static void display_volume_info(struct ubi_device *ubi)
diff --git a/cmd/ubifs.c b/cmd/ubifs.c
index 11bab7a..e4000b7 100644
--- a/cmd/ubifs.c
+++ b/cmd/ubifs.c
@@ -19,16 +19,10 @@
static int ubifs_initialized;
static int ubifs_mounted;
-static int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
+int cmd_ubifs_mount(char *vol_name)
{
- char *vol_name;
int ret;
- if (argc != 2)
- return CMD_RET_USAGE;
-
- vol_name = argv[1];
debug("Using volume %s\n", vol_name);
if (ubifs_initialized == 0) {
@@ -42,19 +36,38 @@
ubifs_mounted = 1;
- return 0;
+ return ret;
}
+static int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ char *vol_name;
+
+ if (argc != 2)
+ return CMD_RET_USAGE;
+
+ vol_name = argv[1];
+
+ return cmd_ubifs_mount(vol_name);
+}
int ubifs_is_mounted(void)
{
return ubifs_mounted;
}
-void cmd_ubifs_umount(void)
+int cmd_ubifs_umount(void)
{
+ if (ubifs_initialized == 0) {
+ printf("No UBIFS volume mounted!\n");
+ return -1;
+ }
+
uboot_ubifs_umount();
ubifs_mounted = 0;
ubifs_initialized = 0;
+
+ return 0;
}
static int do_ubifs_umount(cmd_tbl_t *cmdtp, int flag, int argc,
@@ -63,14 +76,7 @@
if (argc != 1)
return CMD_RET_USAGE;
- if (ubifs_initialized == 0) {
- printf("No UBIFS volume mounted!\n");
- return -1;
- }
-
- cmd_ubifs_umount();
-
- return 0;
+ return cmd_ubifs_umount();
}
static int do_ubifs_ls(cmd_tbl_t *cmdtp, int flag, int argc,
diff --git a/cmd/w1.c b/cmd/w1.c
new file mode 100644
index 0000000..9c95fcf
--- /dev/null
+++ b/cmd/w1.c
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2018
+ * Microchip Technology, Inc.
+ * Eugen Hristev <eugen.hristev@microchip.com>
+ */
+#include <common.h>
+#include <command.h>
+#include <w1.h>
+#include <w1-eeprom.h>
+#include <dm/device-internal.h>
+
+static int w1_bus(void)
+{
+ struct udevice *bus, *dev;
+ int ret;
+
+ ret = w1_get_bus(0, &bus);
+ if (ret) {
+ printf("one wire interface not found\n");
+ return CMD_RET_FAILURE;
+ }
+ printf("Bus %d:\t%s", bus->seq, bus->name);
+ if (device_active(bus))
+ printf(" (active)");
+ printf("\n");
+
+ for (device_find_first_child(bus, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ ret = device_probe(dev);
+
+ printf("\t%s (%d) uclass %s : ", dev->name, dev->seq,
+ dev->uclass->uc_drv->name);
+
+ if (ret)
+ printf("device error\n");
+ else
+ printf("family 0x%x\n", w1_get_device_family(dev));
+ }
+ return CMD_RET_SUCCESS;
+}
+
+static int w1_read(int argc, char *const argv[])
+{
+ int bus_n = 0, dev_n = 0, offset = 0, len = 512;
+ int i;
+ struct udevice *bus, *dev;
+ int ret;
+ u8 buf[512];
+
+ if (argc > 2)
+ bus_n = simple_strtoul(argv[2], NULL, 10);
+
+ if (argc > 3)
+ dev_n = simple_strtoul(argv[3], NULL, 10);
+
+ if (argc > 4)
+ offset = simple_strtoul(argv[4], NULL, 10);
+
+ if (argc > 5)
+ len = simple_strtoul(argv[5], NULL, 10);
+
+ if (len > 512) {
+ printf("len needs to be <= 512\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = w1_get_bus(bus_n, &bus);
+ if (ret) {
+ printf("one wire interface not found\n");
+ return CMD_RET_FAILURE;
+ }
+
+ for (device_find_first_child(bus, &dev), i = 0;
+ dev && i <= dev_n;
+ device_find_next_child(&dev), i++) {
+ ret = device_probe(dev);
+ if (!ret && i == dev_n)
+ break;
+ }
+
+ if (i != dev_n || ret || !dev) {
+ printf("invalid dev\n");
+ return CMD_RET_FAILURE;
+ }
+
+ if (strcmp(dev->uclass->uc_drv->name, "w1_eeprom")) {
+ printf("the device present on the interface is of unknown device class\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = w1_eeprom_read_buf(dev, offset, (u8 *)buf, len);
+ if (ret) {
+ printf("error reading device %s\n", dev->name);
+ return CMD_RET_FAILURE;
+ }
+
+ for (i = 0; i < len; i++)
+ printf("%x", buf[i]);
+ printf("\n");
+
+ return CMD_RET_SUCCESS;
+}
+
+int do_w1(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ if (!strcmp(argv[1], "bus"))
+ return w1_bus();
+
+ if (!strcmp(argv[1], "read"))
+ return w1_read(argc, argv);
+
+ return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(w1, 6, 0, do_w1,
+ "onewire interface utility commands",
+ "bus - show onewire bus info (all)\n"
+ "w1 read [<bus> [<dev> [offset [length]]]]"
+ " - read from onewire device 'dev' on onewire bus 'bus'"
+ " starting from offset 'offset' and length 'length'\n"
+ " defaults: bus 0, dev 0, offset 0, length 512 bytes.");
diff --git a/common/Kconfig b/common/Kconfig
index be2e1b8..41f27a1 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -259,6 +259,11 @@
The buffer is allocated immediately after the malloc() region is
ready.
+config DISABLE_CONSOLE
+ bool "Add functionality to disable console completely"
+ help
+ Disable console (in & out).
+
config IDENT_STRING
string "Board specific string to be added to uboot version string"
help
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index 6b5de4d..4a39cd2 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -7,6 +7,7 @@
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -35,6 +36,7 @@
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -54,4 +56,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig
index a203582..c89c63d 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -8,6 +8,7 @@
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -35,6 +36,7 @@
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -53,4 +55,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig
index 6528eea..b5f960f 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -9,6 +9,7 @@
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -36,6 +37,7 @@
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -54,4 +56,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index 4a5cbb2..b34a0f5 100644
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -2,6 +2,7 @@
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -24,6 +25,8 @@
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -42,4 +45,3 @@
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 96491f3..e334030 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -38,6 +38,7 @@
CONFIG_SPL_OF_PLATDATA=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM_PCA953X=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
@@ -47,6 +48,8 @@
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
# CONFIG_TWL4030_POWER is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_CONS_INDEX=3
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index c30f396..6dc70dd 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -24,6 +24,7 @@
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
+CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPT is not set
# CONFIG_CMD_PART is not set
@@ -50,6 +51,8 @@
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig
index 4039d0ee..8ea522a 100644
--- a/configs/da850evm_direct_nor_defconfig
+++ b/configs/da850evm_direct_nor_defconfig
@@ -5,7 +5,6 @@
CONFIG_DA850_LOWLEVEL=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="USE_NOR,DIRECT_NOR_BOOT"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
@@ -21,6 +20,7 @@
CONFIG_CMD_IMLS=y
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
+CONFIG_CMD_DM=y
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
# CONFIG_CMD_MMC is not set
@@ -48,8 +48,12 @@
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index 11d6a2b..d13d832 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -24,6 +24,7 @@
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
+CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPT is not set
CONFIG_CMD_NAND=y
@@ -51,6 +52,8 @@
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index a7742b4..1d1586d 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -50,3 +50,5 @@
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index e9224b0..c226863 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -50,3 +50,10 @@
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index 5619d23..221755c 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -51,3 +51,5 @@
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index af7939d..b59fdf3 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -57,3 +57,5 @@
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index e5d2b28..2dfe44d 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -61,3 +61,5 @@
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index 54813b4..94c16da 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -67,3 +67,5 @@
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index 493b582..fe0aeaf 100644
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -47,3 +47,10 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index b91542c..2e06f6d 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -49,3 +49,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index 779a8bf..aed30c1 100644
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 2d098d3..c1e86d1 100644
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -48,3 +48,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index 55935f2..b0a562e 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -46,3 +46,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index ad18b46..b37d52d 100644
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index 7aa271f..2ef5b01 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -59,3 +59,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 83a7afb..28027ff 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -45,3 +45,5 @@
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index c72231b..df68b94 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -43,3 +43,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 64e41ec..97364b0 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index a3d1ee8..476bb90 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -60,3 +60,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index b44c35d..9543800 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -58,3 +58,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index 01effd9..bab8009 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -49,3 +49,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index ca1703b..fad2eed 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -49,3 +49,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 9b0200d..08f2f14 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -51,3 +51,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index b1ecedf..3d30205 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -56,3 +56,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index e5495ad..56443ad 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -49,3 +49,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index 7fd3e77..e9c101f 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -65,3 +65,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index a3eea7a..021d4f9 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -64,3 +64,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index e0f07b7..3968136 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -60,3 +60,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index 6495447..c142df3 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -46,3 +46,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index 5204bb5..f9660c0 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -46,3 +46,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 07eebbf..9486e90 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -59,3 +59,5 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig
index 1d288ab..64677f0 100644
--- a/configs/ls1088aqds_defconfig
+++ b/configs/ls1088aqds_defconfig
@@ -47,3 +47,5 @@
CONFIG_USB_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
index 606c52d..7c5f696 100644
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@@ -54,3 +54,5 @@
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig
index 21f64ab..9bda1b3 100644
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@@ -52,3 +52,5 @@
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig
index 09ead40..b1dc2ef 100644
--- a/configs/ls1088aqds_sdcard_ifc_defconfig
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@@ -55,3 +55,5 @@
CONFIG_USB_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
index fad7c7f..615fb5f 100644
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -61,3 +61,5 @@
CONFIG_USB_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
index 859ff11..f54b4a9 100644
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index a42158c..1feaded 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -53,3 +53,5 @@
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
index bc53bba..4b6695d 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080a_emu_defconfig b/configs/ls2080a_emu_defconfig
index 1f2c052..ccccc28 100644
--- a/configs/ls2080a_emu_defconfig
+++ b/configs/ls2080a_emu_defconfig
@@ -33,3 +33,5 @@
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080a_simu_defconfig b/configs/ls2080a_simu_defconfig
index a4263b7..57a568d 100644
--- a/configs/ls2080a_simu_defconfig
+++ b/configs/ls2080a_simu_defconfig
@@ -36,3 +36,5 @@
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig
index a6d6dae..b8b0431 100644
--- a/configs/ls2080aqds_SECURE_BOOT_defconfig
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@@ -54,3 +54,5 @@
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig
index 6ada348..3026351 100644
--- a/configs/ls2080aqds_defconfig
+++ b/configs/ls2080aqds_defconfig
@@ -53,3 +53,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig
index ee986d5..8669651 100644
--- a/configs/ls2080aqds_nand_defconfig
+++ b/configs/ls2080aqds_nand_defconfig
@@ -62,3 +62,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig
index 4dbb6dd..9980caa 100644
--- a/configs/ls2080aqds_qspi_defconfig
+++ b/configs/ls2080aqds_qspi_defconfig
@@ -53,3 +53,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig
index 2259178..8bcab1e 100644
--- a/configs/ls2080aqds_sdcard_defconfig
+++ b/configs/ls2080aqds_sdcard_defconfig
@@ -60,3 +60,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig
index 3c015e3..9d79a22 100644
--- a/configs/ls2080ardb_SECURE_BOOT_defconfig
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig
index a62e09b..f3ff02c 100644
--- a/configs/ls2080ardb_defconfig
+++ b/configs/ls2080ardb_defconfig
@@ -54,3 +54,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig
index 4801f51..8af5cba 100644
--- a/configs/ls2080ardb_nand_defconfig
+++ b/configs/ls2080ardb_nand_defconfig
@@ -58,3 +58,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index 5813d29..6ae8724 100644
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -53,3 +53,5 @@
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index 944384b..ba1f168 100644
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -55,3 +55,5 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/configs/sama5d27_som1_ek_mmc_defconfig b/configs/sama5d27_som1_ek_mmc_defconfig
index 3607470..fbde79c 100644
--- a/configs/sama5d27_som1_ek_mmc_defconfig
+++ b/configs/sama5d27_som1_ek_mmc_defconfig
@@ -90,3 +90,8 @@
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_DM_VIDEO=y
CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig
index 42f0c95..60df0f0 100644
--- a/configs/sama5d2_ptc_ek_mmc_defconfig
+++ b/configs/sama5d2_ptc_ek_mmc_defconfig
@@ -63,3 +63,8 @@
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig
index c4b3085..4e39406 100644
--- a/configs/sama5d2_ptc_ek_nandflash_defconfig
+++ b/configs/sama5d2_ptc_ek_nandflash_defconfig
@@ -62,3 +62,8 @@
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 77dc82c..f8748f8 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -88,3 +88,8 @@
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_DM_VIDEO=y
CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index fc9ec9c..efe7176 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -85,3 +85,8 @@
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_DM_VIDEO=y
CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig
index 7f2d276..154cdc2 100644
--- a/configs/sama5d3_xplained_mmc_defconfig
+++ b/configs/sama5d3_xplained_mmc_defconfig
@@ -76,3 +76,8 @@
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index ac8435e..3bf93de 100644
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -72,4 +72,9 @@
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
CONFIG_FAT_WRITE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
index 89393a9..f60b6b5 100644
--- a/configs/sama5d4_xplained_mmc_defconfig
+++ b/configs/sama5d4_xplained_mmc_defconfig
@@ -84,3 +84,8 @@
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_DM_VIDEO=y
CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index 5387966..3524dbf 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -80,3 +80,8 @@
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_DM_VIDEO=y
CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index 39c86ec..3f519cd 100644
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -84,3 +84,8 @@
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_DM_VIDEO=y
CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 0b20968..fb71998 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -192,6 +192,10 @@
CONFIG_CONSOLE_TRUETYPE=y
CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
CONFIG_VIDEO_SANDBOX_SDL=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_SANDBOX=y
CONFIG_WDT=y
CONFIG_WDT_SANDBOX=y
CONFIG_FS_CBFS=y
diff --git a/doc/device-tree-bindings/chosen.txt b/doc/device-tree-bindings/chosen.txt
index da7b4e6..86c533a 100644
--- a/doc/device-tree-bindings/chosen.txt
+++ b/doc/device-tree-bindings/chosen.txt
@@ -83,3 +83,24 @@
You should not define this property yourself in the device-tree, as it
may be overwritten without warning.
+
+firmware-loader property
+------------------------
+Multiple file system firmware loader nodes could be defined in device trees for
+multiple storage type and their default partition, then a property
+"firmware-loader" can be used to pass default firmware loader
+node(default storage type) to the firmware loader driver.
+
+Example
+-------
+/ {
+ chosen {
+ firmware-loader = &fs_loader0;
+ };
+
+ fs_loader0: fs-loader@0 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ phandlepart = <&mmc 1>;
+ };
+};
diff --git a/doc/device-tree-bindings/misc/fs_loader.txt b/doc/device-tree-bindings/misc/fs_loader.txt
new file mode 100644
index 0000000..884fbf4
--- /dev/null
+++ b/doc/device-tree-bindings/misc/fs_loader.txt
@@ -0,0 +1,48 @@
+* File system firmware loader
+
+Required properties:
+--------------------
+
+- compatible: should contain "u-boot,fs-loader"
+- phandlepart: which block storage device and partition the image loading from,
+ this property is required for mmc, usb and sata. This is unsigned
+ 32-bit array. For example phandlepart=<&mmc_0 1>, meaning use
+ that MMC0 node pointer, partition 1.
+- mdtpart: which partition of ubi the image loading from, this property is
+ required for ubi and mounting.
+- ubivol: which volume of ubi the image loading from, this property is required
+ for ubi and mounting.
+
+Example of storage device and partition search set for mmc, usb, sata and
+ubi in device tree source as shown in below:
+
+ Example of storage type and device partition search set for mmc, usb,
+ sata and ubi as shown in below:
+ Example for mmc:
+ fs_loader0: fs-loader@0 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ phandlepart = <&mmc_0 1>;
+ };
+
+ Example for usb:
+ fs_loader1: fs-loader@1 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ phandlepart = <&usb0 1>;
+ };
+
+ Example for sata:
+ fs_loader2: fs-loader@2 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ phandlepart = <&sata0 1>;
+ };
+
+ Example for ubi:
+ fs_loader3: fs-loader@3 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ mtdpart = "UBI",
+ ubivol = "ubi0";
+ };
diff --git a/doc/device-tree-bindings/w1-eeprom/ds24xxx.txt b/doc/device-tree-bindings/w1-eeprom/ds24xxx.txt
new file mode 100644
index 0000000..2e91be9
--- /dev/null
+++ b/doc/device-tree-bindings/w1-eeprom/ds24xxx.txt
@@ -0,0 +1,37 @@
+Maxim DS24 families driver device binding - one wire protocol EEPROMS from Maxim
+=======================
+
+This memory needs to be connected to a onewire bus, as a child node.
+The bus will read the device serial number and match this node with a found
+device on the bus
+Also check doc/device-tree-bindings/w1 for onewire bus drivers
+
+Driver:
+- drivers/w1-eeprom/ds24xxx.c
+
+Software ds24xxx device-tree node properties:
+Required:
+* compatible = "maxim,ds24b33"
+or
+* compatible = "maxim,ds2431"
+Further memories can be added.
+
+Optional:
+* none
+
+Example:
+ eeprom1: eeprom@0 {
+ compatible = "maxim,ds24xxx";
+ }
+
+Example with parent bus:
+
+onewire_tm: onewire {
+ compatible = "w1-gpio";
+ gpios = <&pioA 32 0>;
+
+ eeprom1: eeprom@0 {
+ compatible = "maxim,ds24xxx";
+ }
+};
+
diff --git a/doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt b/doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt
new file mode 100644
index 0000000..82bb589
--- /dev/null
+++ b/doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt
@@ -0,0 +1,34 @@
+Onewire EEPROM sandbox driver device binding - one wire protocol sandbox EEPROM
+=======================
+
+This memory needs to be connected to a onewire bus, as a child node.
+The bus will read the device serial number and match this node with a found
+device on the bus
+Also check doc/device-tree-bindings/w1 for onewire bus drivers
+
+Driver:
+- drivers/w1-eeprom/eep_sandbox.c
+
+Software ds24xxx device-tree node properties:
+Required:
+* compatible = "sandbox,w1-eeprom"
+
+Optional:
+* none
+
+Example:
+ eeprom1: eeprom@0 {
+ compatible = "sandbox,w1-eeprom";
+ }
+
+Example with parent bus:
+
+onewire_tm: onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio_a 8>;
+
+ eeprom1: eeprom@0 {
+ compatible = "sandbox,w1-eeprom";
+ }
+};
+
diff --git a/doc/device-tree-bindings/w1/w1-gpio.txt b/doc/device-tree-bindings/w1/w1-gpio.txt
new file mode 100644
index 0000000..5a58244
--- /dev/null
+++ b/doc/device-tree-bindings/w1/w1-gpio.txt
@@ -0,0 +1,40 @@
+W1 gpio device binding - one wire protocol over bitbanged gpio
+=======================
+
+
+Child nodes are required in device tree. The driver will detect
+the devices serial number and then search in the child nodes in the device tree
+for the proper node and try to match it with the device.
+
+Also check doc/device-tree-bindings/w1-eeprom for possible child nodes drivers
+
+Driver:
+- drivers/w1/w1-gpio.c
+
+Software w1 device-tree node properties:
+Required:
+* compatible = "w1-gpio";
+* gpios = <...>;
+ This is the gpio used for one wire protocol, using bitbanging
+
+Optional:
+* none
+
+Example:
+
+onewire_tm: onewire {
+ compatible = "w1-gpio";
+ gpios = <&pioA 32 0>;
+};
+
+Example with child:
+
+onewire_tm: onewire {
+ compatible = "w1-gpio";
+ gpios = <&pioA 32 0>;
+
+ eeprom1: eeprom@0 {
+ compatible = "maxim,ds24xxx";
+ }
+};
+
diff --git a/doc/driver-model/fs_firmware_loader.txt b/doc/driver-model/fs_firmware_loader.txt
new file mode 100644
index 0000000..290915a
--- /dev/null
+++ b/doc/driver-model/fs_firmware_loader.txt
@@ -0,0 +1,133 @@
+# Copyright (C) 2018 Intel Corporation <www.intel.com>
+#
+# SPDX-License-Identifier: GPL-2.0
+
+Introduction
+============
+
+This is file system firmware loader for U-Boot framework, which has very close
+to some Linux Firmware API. For the details of Linux Firmware API, you can refer
+to https://01.org/linuxgraphics/gfx-docs/drm/driver-api/firmware/index.html.
+
+File system firmware loader can be used to load whatever(firmware, image,
+and binary) from the storage device in file system format into target location
+such as memory, then consumer driver such as FPGA driver can program FPGA image
+from the target location into FPGA.
+
+To enable firmware loader, CONFIG_FS_LOADER need to be set at
+<board_name>_defconfig such as "CONFIG_FS_LOADER=y".
+
+Firmware Loader API core features
+---------------------------------
+
+Firmware storage device described in device tree source
+-------------------------------------------------------
+ For passing data like storage device phandle and partition where the
+ firmware loading from to the firmware loader driver, those data could be
+ defined in fs-loader node as shown in below:
+
+ Example for block device:
+ fs_loader0: fs-loader@0 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ phandlepart = <&mmc 1>;
+ };
+
+ <&mmc 1> means block storage device pointer and its partition.
+
+ Above example is a description for block storage, but for UBI storage
+ device, it can be described in FDT as shown in below:
+
+ Example for ubi:
+ fs_loader1: fs-loader@1 {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ mtdpart = "UBI",
+ ubivol = "ubi0";
+ };
+
+ Then, firmware_loader property would be set with the path of fs_loader
+ node under /chosen node such as:
+ /{
+ chosen {
+ firmware_loader = &fs_loader0;
+ };
+ };
+
+ However, this driver is also designed to support U-boot environment
+ variables, so all these data from FDT can be overwritten
+ through the U-boot environment variable during run time.
+ For examples:
+ "storage_interface" - Storage interface, it can be "mmc", "usb", "sata"
+ or "ubi".
+ "fw_dev_part" - Block device number and its partition, it can be "0:1".
+ "fw_ubi_mtdpart" - UBI device mtd partition, it can be "UBI".
+ "fw_ubi_volume" - UBI volume, it can be "ubi0".
+
+ When above environment variables are set, environment values would be
+ used instead of data from FDT.
+ The benefit of this design allows user to change storage attribute data
+ at run time through U-boot console and saving the setting as default
+ environment values in the storage for the next power cycle, so no
+ compilation is required for both driver and FDT.
+
+File system firmware Loader API
+-------------------------------
+
+int request_firmware_into_buf(struct device_platdata *plat,
+ const char *name,
+ void *buf, size_t size, u32 offset,
+ struct firmware **firmwarep)
+--------------------------------------------------------------------
+Load firmware into a previously allocated buffer
+
+Parameters:
+
+1. struct device_platdata *plat
+ Platform data such as storage and partition firmware loading from
+
+2. const char *name
+ name of firmware file
+
+3. void *buf
+ address of buffer to load firmware into
+
+4. size_t size
+ size of buffer
+
+5. u32 offset
+ offset of a file for start reading into buffer
+
+6. struct firmware **firmwarep
+ pointer to firmware image
+
+return:
+ size of total read
+ -ve when error
+
+Description:
+ The firmware is loaded directly into the buffer pointed to by buf and
+ the @firmwarep data member is pointed at buf
+
+Note: Memory would be allocated for firmware image, hence user should
+ free() *firmwarep and *firmwarep->priv structs after usage of
+ request_firmware_into_buf(), otherwise it will always leak memory
+ while subsequent calls of request_firmware_into_buf() with the same
+ *firmwarep argument. Those arguments can be free through calling API
+ below release_firmware();
+
+Example of creating firmware loader instance and calling
+request_firmware_into_buf API:
+ if (uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &dev)) {
+ request_firmware_into_buf(dev->plat, filename, buffer_location,
+ buffer_size, offset_ofreading, &fw);
+ }
+
+void release_firmware(struct firmware *firmware)
+------------------------------------------------
+Release the resource associated with a firmware image
+
+Parameters:
+
+1. struct firmware *firmware
+ Firmware resource to release
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 56536c4..9ac90c4 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -74,6 +74,8 @@
source "drivers/pwm/Kconfig"
+source "drivers/qe/Kconfig"
+
source "drivers/ram/Kconfig"
source "drivers/remoteproc/Kconfig"
@@ -106,6 +108,10 @@
source "drivers/video/Kconfig"
+source "drivers/w1/Kconfig"
+
+source "drivers/w1-eeprom/Kconfig"
+
source "drivers/watchdog/Kconfig"
config PHYS_TO_BUS
diff --git a/drivers/Makefile b/drivers/Makefile
index 23ea609..1d5905f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -105,6 +105,8 @@
obj-y += soc/
obj-y += thermal/
obj-y += axi/
+obj-$(CONFIG_W1) += w1/
+obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
endif
diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sata_ceva.c
index 047cff7..65896d1 100644
--- a/drivers/ata/sata_ceva.c
+++ b/drivers/ata/sata_ceva.c
@@ -81,13 +81,24 @@
#define CEVA_TRANS_CFG 0x08000029
#define CEVA_AXICC_CFG 0x3fffffff
+/* for ls1021a */
+#define LS1021_AHCI_VEND_AXICC 0xC0
+#define LS1021_CEVA_PHY2_CFG 0x28183414
+#define LS1021_CEVA_PHY3_CFG 0x0e080e06
+#define LS1021_CEVA_PHY4_CFG 0x064a080b
+#define LS1021_CEVA_PHY5_CFG 0x2aa86470
+
/* ecc addr-val pair */
#define ECC_DIS_ADDR_CH2 0x80000000
-#define ECC_DIS_VAL_CH2 0x20140520
+#define ECC_DIS_VAL_CH2 0x20140520
+#define SATA_ECC_REG_ADDR 0x20220520
+#define SATA_ECC_DISABLE 0x00020000
enum ceva_soc {
CEVA_1V84,
CEVA_LS1012A,
+ CEVA_LS1021A,
+ CEVA_LS1043A,
};
struct ceva_sata_priv {
@@ -113,7 +124,20 @@
writel(tmp, base + AHCI_VEND_PTC);
break;
+ case CEVA_LS1021A:
+ writel(SATA_ECC_DISABLE, SATA_ECC_REG_ADDR);
+ writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
+ writel(LS1021_CEVA_PHY2_CFG, base + AHCI_VEND_PP2C);
+ writel(LS1021_CEVA_PHY3_CFG, base + AHCI_VEND_PP3C);
+ writel(LS1021_CEVA_PHY4_CFG, base + AHCI_VEND_PP4C);
+ writel(LS1021_CEVA_PHY5_CFG, base + AHCI_VEND_PP5C);
+ writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
+ if (priv->flag & FLAG_COHERENT)
+ writel(CEVA_AXICC_CFG, base + LS1021_AHCI_VEND_AXICC);
+ break;
+
case CEVA_LS1012A:
+ case CEVA_LS1043A:
writel(ECC_DIS_ADDR_CH2, ECC_DIS_VAL_CH2);
writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
@@ -144,6 +168,8 @@
static const struct udevice_id sata_ceva_ids[] = {
{ .compatible = "ceva,ahci-1v84", .data = CEVA_1V84 },
{ .compatible = "fsl,ls1012a-ahci", .data = CEVA_LS1012A },
+ { .compatible = "fsl,ls1021a-ahci", .data = CEVA_LS1021A },
+ { .compatible = "fsl,ls1043a-ahci", .data = CEVA_LS1043A },
{ }
};
diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c
index 9e0c823..facf527 100644
--- a/drivers/block/blk-uclass.c
+++ b/drivers/block/blk-uclass.c
@@ -132,6 +132,29 @@
}
/**
+ * blk_get_by_device() - Get the block device descriptor for the given device
+ * @dev: Instance of a storage device
+ *
+ * Return: With block device descriptor on success , NULL if there is no such
+ * block device.
+ */
+struct blk_desc *blk_get_by_device(struct udevice *dev)
+{
+ struct udevice *child_dev, *next;
+
+ device_foreach_child_safe(child_dev, next, dev) {
+ if (device_get_uclass_id(child_dev) != UCLASS_BLK)
+ continue;
+
+ return dev_get_uclass_platdata(child_dev);
+ }
+
+ debug("%s: No block device found\n", __func__);
+
+ return NULL;
+}
+
+/**
* get_desc() - Get the block device descriptor for the given device number
*
* @if_type: Interface type
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index bfa5c91..b0fb73f 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -295,4 +295,13 @@
help
Support for serdes found on MPC83xx SoCs.
+config FS_LOADER
+ bool "Enable loader driver for file system"
+ help
+ This is file system generic loader which can be used to load
+ the file image from the storage into target such as memory.
+
+ The consumer driver would then use this loader to program whatever,
+ ie. the FPGA device.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index da4666f..acf24c4 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -56,3 +56,4 @@
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
+obj-$(CONFIG_FS_LOADER) += fs_loader.o
diff --git a/drivers/misc/fs_loader.c b/drivers/misc/fs_loader.c
new file mode 100644
index 0000000..5fe642b
--- /dev/null
+++ b/drivers/misc/fs_loader.c
@@ -0,0 +1,295 @@
+/*
+ * Copyright (C) 2018 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <blk.h>
+#include <fs.h>
+#include <fs_loader.h>
+#include <linux/string.h>
+#include <mapmem.h>
+#include <malloc.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct firmware_priv {
+ const char *name; /* Filename */
+ u32 offset; /* Offset of reading a file */
+};
+
+#ifdef CONFIG_CMD_UBIFS
+static int mount_ubifs(char *mtdpart, char *ubivol)
+{
+ int ret = ubi_part(mtdpart, NULL);
+
+ if (ret) {
+ debug("Cannot find mtd partition %s\n", mtdpart);
+ return ret;
+ }
+
+ return cmd_ubifs_mount(ubivol);
+}
+
+static int umount_ubifs(void)
+{
+ return cmd_ubifs_umount();
+}
+#else
+static int mount_ubifs(char *mtdpart, char *ubivol)
+{
+ debug("Error: Cannot load image: no UBIFS support\n");
+ return -ENOSYS;
+}
+#endif
+
+static int select_fs_dev(struct device_platdata *plat)
+{
+ int ret;
+
+ if (plat->phandlepart.phandle) {
+ ofnode node;
+
+ node = ofnode_get_by_phandle(plat->phandlepart.phandle);
+
+ int of_offset = ofnode_to_offset(node);
+
+ struct udevice *dev;
+
+ ret = device_get_global_by_of_offset(of_offset, &dev);
+ if (!ret) {
+ struct blk_desc *desc = blk_get_by_device(dev);
+ if (desc) {
+ ret = fs_set_blk_dev_with_part(desc,
+ plat->phandlepart.partition);
+ } else {
+ debug("%s: No device found\n", __func__);
+ return -ENODEV;
+ }
+ }
+ } else if (plat->mtdpart && plat->ubivol) {
+ ret = mount_ubifs(plat->mtdpart, plat->ubivol);
+ if (ret)
+ return ret;
+
+ ret = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS);
+ } else {
+ debug("Error: unsupported storage device.\n");
+ return -ENODEV;
+ }
+
+ if (ret)
+ debug("Error: could not access storage.\n");
+
+ return ret;
+}
+
+/**
+ * _request_firmware_prepare - Prepare firmware struct.
+ *
+ * @name: Name of firmware file.
+ * @dbuf: Address of buffer to load firmware into.
+ * @size: Size of buffer.
+ * @offset: Offset of a file for start reading into buffer.
+ * @firmwarep: Pointer to pointer to firmware image.
+ *
+ * Return: Negative value if fail, 0 for successful.
+ */
+static int _request_firmware_prepare(const char *name, void *dbuf,
+ size_t size, u32 offset,
+ struct firmware **firmwarep)
+{
+ if (!name || name[0] == '\0')
+ return -EINVAL;
+
+ /* No memory allocation is required if *firmwarep is allocated */
+ if (!(*firmwarep)) {
+ (*firmwarep) = calloc(1, sizeof(struct firmware));
+ if (!(*firmwarep))
+ return -ENOMEM;
+
+ (*firmwarep)->priv = calloc(1, sizeof(struct firmware_priv));
+ if (!(*firmwarep)->priv) {
+ free(*firmwarep);
+ return -ENOMEM;
+ }
+ } else if (!(*firmwarep)->priv) {
+ (*firmwarep)->priv = calloc(1, sizeof(struct firmware_priv));
+ if (!(*firmwarep)->priv) {
+ free(*firmwarep);
+ return -ENOMEM;
+ }
+ }
+
+ ((struct firmware_priv *)((*firmwarep)->priv))->name = name;
+ ((struct firmware_priv *)((*firmwarep)->priv))->offset = offset;
+ (*firmwarep)->data = dbuf;
+ (*firmwarep)->size = size;
+
+ return 0;
+}
+
+/**
+ * release_firmware - Release the resource associated with a firmware image
+ * @firmware: Firmware resource to release
+ */
+void release_firmware(struct firmware *firmware)
+{
+ if (firmware) {
+ if (firmware->priv) {
+ free(firmware->priv);
+ firmware->priv = NULL;
+ }
+ free(firmware);
+ }
+}
+
+/**
+ * fw_get_filesystem_firmware - load firmware into an allocated buffer.
+ * @plat: Platform data such as storage and partition firmware loading from.
+ * @firmware: pointer to firmware image.
+ *
+ * Return: Size of total read, negative value when error.
+ */
+static int fw_get_filesystem_firmware(struct device_platdata *plat,
+ struct firmware *firmware)
+{
+ struct firmware_priv *fw_priv = NULL;
+ loff_t actread;
+ char *storage_interface, *dev_part, *ubi_mtdpart, *ubi_volume;
+ int ret;
+
+ storage_interface = env_get("storage_interface");
+ dev_part = env_get("fw_dev_part");
+ ubi_mtdpart = env_get("fw_ubi_mtdpart");
+ ubi_volume = env_get("fw_ubi_volume");
+
+ if (storage_interface && dev_part) {
+ ret = fs_set_blk_dev(storage_interface, dev_part, FS_TYPE_ANY);
+ } else if (storage_interface && ubi_mtdpart && ubi_volume) {
+ ret = mount_ubifs(ubi_mtdpart, ubi_volume);
+ if (ret)
+ return ret;
+
+ if (!strcmp("ubi", storage_interface))
+ ret = fs_set_blk_dev(storage_interface, NULL,
+ FS_TYPE_UBIFS);
+ else
+ ret = -ENODEV;
+ } else {
+ ret = select_fs_dev(plat);
+ }
+
+ if (ret)
+ goto out;
+
+ fw_priv = firmware->priv;
+
+ ret = fs_read(fw_priv->name, (ulong)map_to_sysmem(firmware->data),
+ fw_priv->offset, firmware->size, &actread);
+ if (ret) {
+ debug("Error: %d Failed to read %s from flash %lld != %d.\n",
+ ret, fw_priv->name, actread, firmware->size);
+ } else {
+ ret = actread;
+ }
+
+out:
+#ifdef CONFIG_CMD_UBIFS
+ umount_ubifs();
+#endif
+ return ret;
+}
+
+/**
+ * request_firmware_into_buf - Load firmware into a previously allocated buffer.
+ * @plat: Platform data such as storage and partition firmware loading from.
+ * @name: Name of firmware file.
+ * @buf: Address of buffer to load firmware into.
+ * @size: Size of buffer.
+ * @offset: Offset of a file for start reading into buffer.
+ * @firmwarep: Pointer to firmware image.
+ *
+ * The firmware is loaded directly into the buffer pointed to by @buf and
+ * the @firmwarep data member is pointed at @buf.
+ *
+ * Return: Size of total read, negative value when error.
+ */
+int request_firmware_into_buf(struct device_platdata *plat,
+ const char *name,
+ void *buf, size_t size, u32 offset,
+ struct firmware **firmwarep)
+{
+ int ret;
+
+ if (!plat)
+ return -EINVAL;
+
+ ret = _request_firmware_prepare(name, buf, size, offset, firmwarep);
+ if (ret < 0) /* error */
+ return ret;
+
+ ret = fw_get_filesystem_firmware(plat, *firmwarep);
+
+ return ret;
+}
+
+static int fs_loader_ofdata_to_platdata(struct udevice *dev)
+{
+ const char *fs_loader_path;
+ u32 phandlepart[2];
+
+ fs_loader_path = ofnode_get_chosen_prop("firmware-loader");
+
+ if (fs_loader_path) {
+ ofnode fs_loader_node;
+
+ fs_loader_node = ofnode_path(fs_loader_path);
+ if (ofnode_valid(fs_loader_node)) {
+ struct device_platdata *plat;
+ plat = dev->platdata;
+
+ if (!ofnode_read_u32_array(fs_loader_node,
+ "phandlepart",
+ phandlepart, 2)) {
+ plat->phandlepart.phandle = phandlepart[0];
+ plat->phandlepart.partition = phandlepart[1];
+ }
+
+ plat->mtdpart = (char *)ofnode_read_string(
+ fs_loader_node, "mtdpart");
+
+ plat->ubivol = (char *)ofnode_read_string(
+ fs_loader_node, "ubivol");
+ }
+ }
+
+ return 0;
+}
+
+static int fs_loader_probe(struct udevice *dev)
+{
+ return 0;
+};
+
+static const struct udevice_id fs_loader_ids[] = {
+ { .compatible = "u-boot,fs-loader"},
+ { }
+};
+
+U_BOOT_DRIVER(fs_loader) = {
+ .name = "fs-loader",
+ .id = UCLASS_FS_FIRMWARE_LOADER,
+ .of_match = fs_loader_ids,
+ .probe = fs_loader_probe,
+ .ofdata_to_platdata = fs_loader_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct device_platdata),
+};
+
+UCLASS_DRIVER(fs_loader) = {
+ .id = UCLASS_FS_FIRMWARE_LOADER,
+ .name = "fs-loader",
+};
diff --git a/drivers/misc/fsl_portals.c b/drivers/misc/fsl_portals.c
index d313768..45eed22 100644
--- a/drivers/misc/fsl_portals.c
+++ b/drivers/misc/fsl_portals.c
@@ -49,7 +49,7 @@
out_be32(&qman->qcsp[i].qcsp_io_cfg, (sdest << 16) | fliodn);
}
#else
-#ifdef CONFIG_ARCH_LS1046A
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
int i;
for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) {
@@ -197,7 +197,7 @@
char compat[64];
int compat_len;
-#ifdef CONFIG_ARCH_LS1046A
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
int smmu_ph = fdt_get_smmu_phandle(blob);
#endif
@@ -211,7 +211,8 @@
off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
while (off != -FDT_ERR_NOTFOUND) {
-#if defined(CONFIG_PPC) || defined(CONFIG_ARCH_LS1046A)
+#if defined(CONFIG_PPC) || defined(CONFIG_ARCH_LS1043A) || \
+defined(CONFIG_ARCH_LS1046A)
#ifdef CONFIG_FSL_CORENET
u32 liodns[2];
#endif
@@ -226,7 +227,7 @@
int j;
#endif
-#endif /* CONFIG_PPC || CONFIG_ARCH_LS1046A */
+#endif /* CONFIG_PPC || CONFIG_ARCH_LS1043A || CONFIG_ARCH_LS1046A */
err = fdt_setprop(blob, off, "compatible", compat, compat_len);
if (err < 0)
goto err;
@@ -275,7 +276,7 @@
goto err;
#endif
#else
-#ifdef CONFIG_ARCH_LS1046A
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
if (smmu_ph >= 0) {
u32 icids[3];
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 8ab56d2..ec853d0 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -83,7 +83,6 @@
#if CONFIG_IS_ENABLED(DM_MMC)
struct gpio_desc cd_gpio; /* Change Detect GPIO */
struct gpio_desc wp_gpio; /* Write Protect GPIO */
- bool cd_inverted;
#else
int cd_gpio;
int wp_gpio;
@@ -1368,17 +1367,15 @@
#if CONFIG_IS_ENABLED(DM_MMC)
static int omap_hsmmc_getcd(struct udevice *dev)
{
- struct omap_hsmmc_data *priv = dev_get_priv(dev);
int value = -1;
#if CONFIG_IS_ENABLED(DM_GPIO)
+ struct omap_hsmmc_data *priv = dev_get_priv(dev);
value = dm_gpio_get_value(&priv->cd_gpio);
#endif
/* if no CD return as 1 */
if (value < 0)
return 1;
- if (priv->cd_inverted)
- return !value;
return value;
}
@@ -1860,10 +1857,6 @@
}
#endif
-#ifdef OMAP_HSMMC_USE_GPIO
- plat->cd_inverted = fdtdec_get_bool(fdt, node, "cd-inverted");
-#endif
-
return 0;
}
#endif
@@ -1892,9 +1885,6 @@
priv->base_addr = plat->base_addr;
priv->controller_flags = plat->controller_flags;
priv->hw_rev = plat->hw_rev;
-#ifdef OMAP_HSMMC_USE_GPIO
- priv->cd_inverted = plat->cd_inverted;
-#endif
#ifdef CONFIG_BLK
mmc = plat->mmc;
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index 3327073..c5cf188 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -402,7 +402,7 @@
printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
dev, blk, cnt);
mmc_init(mmc);
- (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt,
addr);
}
#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE)
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 147d043..f896e80 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -328,7 +328,8 @@
ft_fixup_port(blob, &fm_info[i],
"fsl,fman-1g-mac");
} else {
- if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
+ if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-xgec") &&
+ ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
ft_fixup_port(blob, &fm_info[i],
"fsl,fman-10g-mac");
}
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index 940025a..d9a897d 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -2,6 +2,7 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
*/
#include <common.h>
#include <errno.h>
@@ -29,6 +30,7 @@
#define MC_BOOT_ENV_VAR "mcinitcmd"
DECLARE_GLOBAL_DATA_PTR;
+static int mc_memset_resv_ram;
static int mc_boot_status = -1;
static int mc_dpl_applied = -1;
#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
@@ -278,6 +280,40 @@
MC_FIXUP_DPL);
}
+void fdt_fsl_mc_fixup_iommu_map_entry(void *blob)
+{
+ u32 *prop;
+ u32 iommu_map[4];
+ int offset;
+ int lenp;
+
+ /* find fsl-mc node */
+ offset = fdt_path_offset(blob, "/soc/fsl-mc");
+ if (offset < 0)
+ offset = fdt_path_offset(blob, "/fsl-mc");
+ if (offset < 0) {
+ printf("%s: fsl-mc: ERR: fsl-mc node not found in DT, err %d\n",
+ __func__, offset);
+ return;
+ }
+
+ prop = fdt_getprop_w(blob, offset, "iommu-map", &lenp);
+ if (!prop) {
+ debug("%s: fsl-mc: ERR: missing iommu-map in fsl-mc bus node\n",
+ __func__);
+ return;
+ }
+
+ iommu_map[0] = cpu_to_fdt32(FSL_DPAA2_STREAM_ID_START);
+ iommu_map[1] = *++prop;
+ iommu_map[2] = cpu_to_fdt32(FSL_DPAA2_STREAM_ID_START);
+ iommu_map[3] = cpu_to_fdt32(FSL_DPAA2_STREAM_ID_END -
+ FSL_DPAA2_STREAM_ID_START + 1);
+
+ fdt_setprop_inplace(blob, offset, "iommu-map",
+ iommu_map, sizeof(iommu_map));
+}
+
static int mc_fixup_dpc_mac_addr(void *blob, int dpmac_id,
struct eth_device *eth_dev)
{
@@ -810,6 +846,11 @@
{
size_t mc_ram_size = mc_get_dram_block_size();
+ if (!mc_memset_resv_ram || (get_mc_boot_status() < 0)) {
+ mc_memset_resv_ram = 1;
+ memset((void *)gd->arch.resv_ram, 0, mc_ram_size);
+ }
+
return (gd->arch.resv_ram + mc_ram_size - 1) &
MC_RAM_BASE_ADDR_ALIGNMENT_MASK;
}
diff --git a/drivers/net/pfe_eth/pfe_mdio.c b/drivers/net/pfe_eth/pfe_mdio.c
index b53edb7..2dde9e7 100644
--- a/drivers/net/pfe_eth/pfe_mdio.c
+++ b/drivers/net/pfe_eth/pfe_mdio.c
@@ -162,7 +162,6 @@
if (gem->phy_mode == PHY_INTERFACE_MODE_SGMII_2500)
sgmii_2500 = 1;
- printf("%s %d\n", __func__, priv->gemac_port);
/* PCS configuration done with corresponding GEMAC */
bus.priv = gem_info[priv->gemac_port].gemac_base;
diff --git a/drivers/pinctrl/pinctrl-sandbox.c b/drivers/pinctrl/pinctrl-sandbox.c
index 468fa2a..755ac08 100644
--- a/drivers/pinctrl/pinctrl-sandbox.c
+++ b/drivers/pinctrl/pinctrl-sandbox.c
@@ -14,6 +14,7 @@
"SDA",
"TX",
"RX",
+ "W1"
};
static const char * const sandbox_groups[] = {
@@ -21,12 +22,14 @@
"serial_a",
"serial_b",
"spi",
+ "w1",
};
static const char * const sandbox_functions[] = {
"i2c",
"serial",
"spi",
+ "w1",
};
static const struct pinconf_param sandbox_conf_params[] = {
diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig
new file mode 100644
index 0000000..49a6e32
--- /dev/null
+++ b/drivers/qe/Kconfig
@@ -0,0 +1,12 @@
+#
+# QUICC Engine Drivers
+#
+config U_QE
+ bool "Enable support for U QUICC Engine"
+ default y if (ARCH_LS1021A && !SD_BOOT && !NAND_BOOT && !QSPI_BOOT) \
+ || (TARGET_T1024QDS) \
+ || (TARGET_T1024RDB) \
+ || (TARGET_T1040QDS && !NOBQFMAN) \
+ || (TARGET_LS1043ARDB && !SPL_NO_QE && !NAND_BOOT && !QSPI_BOOT)
+ help
+ Choose this option to add support for U QUICC Engine.
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 7654df8..7010bbc 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -218,7 +218,7 @@
printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
dev, blk, cnt);
mmc_init(mmc);
- (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt,
addr);
}
#endif
diff --git a/drivers/w1-eeprom/Kconfig b/drivers/w1-eeprom/Kconfig
new file mode 100644
index 0000000..4b7f3c4
--- /dev/null
+++ b/drivers/w1-eeprom/Kconfig
@@ -0,0 +1,29 @@
+#
+# EEPROM subsystem configuration
+#
+
+menu "1-wire EEPROM support"
+
+config W1_EEPROM
+ bool "Enable support for EEPROMs on 1wire interface"
+ depends on DM
+ help
+ Support for the EEPROMs connected on 1-wire Dallas protocol interface
+
+if W1_EEPROM
+
+config W1_EEPROM_DS24XXX
+ bool "Enable Maxim DS24 families EEPROM support"
+ depends on W1
+ help
+ Maxim DS24 EEPROMs 1-Wire EEPROM support
+
+config W1_EEPROM_SANDBOX
+ bool "Enable sandbox onewire EEPROM driver"
+ depends on W1
+ help
+ Sandbox driver for a onewire EEPROM memory
+
+endif
+
+endmenu
diff --git a/drivers/w1-eeprom/Makefile b/drivers/w1-eeprom/Makefile
new file mode 100644
index 0000000..03cc4c8
--- /dev/null
+++ b/drivers/w1-eeprom/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o
+
+obj-$(CONFIG_W1_EEPROM_DS24XXX) += ds24xxx.o
+
+obj-$(CONFIG_W1_EEPROM_SANDBOX) += eep_sandbox.o
diff --git a/drivers/w1-eeprom/ds24xxx.c b/drivers/w1-eeprom/ds24xxx.c
new file mode 100644
index 0000000..56186e5
--- /dev/null
+++ b/drivers/w1-eeprom/ds24xxx.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co
+ * Copyright (c) 2018 Microchip Technology, Inc.
+ *
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <dm.h>
+#include <w1-eeprom.h>
+#include <w1.h>
+
+#define W1_F2D_READ_EEPROM 0xf0
+
+static int ds24xxx_read_buf(struct udevice *dev, unsigned int offset,
+ u8 *buf, unsigned int count)
+{
+ w1_reset_select(dev);
+
+ w1_write_byte(dev, W1_F2D_READ_EEPROM);
+ w1_write_byte(dev, offset & 0xff);
+ w1_write_byte(dev, offset >> 8);
+
+ return w1_read_buf(dev, buf, count);
+}
+
+static int ds24xxx_probe(struct udevice *dev)
+{
+ struct w1_device *w1;
+
+ w1 = dev_get_platdata(dev);
+ w1->id = 0;
+ return 0;
+}
+
+static const struct w1_eeprom_ops ds24xxx_ops = {
+ .read_buf = ds24xxx_read_buf,
+};
+
+static const struct udevice_id ds24xxx_id[] = {
+ { .compatible = "maxim,ds24b33", .data = W1_FAMILY_DS24B33 },
+ { .compatible = "maxim,ds2431", .data = W1_FAMILY_DS2431 },
+ { },
+};
+
+U_BOOT_DRIVER(ds24xxx) = {
+ .name = "ds24xxx",
+ .id = UCLASS_W1_EEPROM,
+ .of_match = ds24xxx_id,
+ .ops = &ds24xxx_ops,
+ .probe = ds24xxx_probe,
+};
diff --git a/drivers/w1-eeprom/eep_sandbox.c b/drivers/w1-eeprom/eep_sandbox.c
new file mode 100644
index 0000000..27c7f9f
--- /dev/null
+++ b/drivers/w1-eeprom/eep_sandbox.c
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (c) 2018 Microchip Technology, Inc.
+ *
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <dm.h>
+#include <w1-eeprom.h>
+#include <w1.h>
+
+#define W1_F2D_READ_EEPROM 0xf0
+
+#define EEP_SANDBOX_SAMPLE_MEM "this is a sample EEPROM memory string."
+
+static int eep_sandbox_read_buf(struct udevice *dev, unsigned int offset,
+ u8 *buf, unsigned int count)
+{
+ /* do not allow to copy more than our maximum sample string */
+ if (offset + count < strlen(EEP_SANDBOX_SAMPLE_MEM)) {
+ offset = 0;
+ count = strlen(EEP_SANDBOX_SAMPLE_MEM);
+ }
+ strncpy((char *)buf, EEP_SANDBOX_SAMPLE_MEM, count);
+
+ /*
+ * in case the w1 subsystem uses some different kind of sandbox testing,
+ * like randomized gpio values , we take the buffer from there
+ */
+
+ w1_reset_select(dev);
+
+ w1_write_byte(dev, W1_F2D_READ_EEPROM);
+ w1_write_byte(dev, offset & 0xff);
+ w1_write_byte(dev, offset >> 8);
+
+ w1_read_buf(dev, buf, count);
+
+ /*
+ * even if read buf from w1 fails, return success as we hardcoded
+ * the buffer.
+ */
+ return 0;
+}
+
+static const struct w1_eeprom_ops eep_sandbox_ops = {
+ .read_buf = eep_sandbox_read_buf,
+};
+
+static const struct udevice_id eep_sandbox_id[] = {
+ { .compatible = "sandbox,w1-eeprom", .data = W1_FAMILY_EEP_SANDBOX },
+ { },
+};
+
+U_BOOT_DRIVER(eep_sandbox) = {
+ .name = "eep_sandbox",
+ .id = UCLASS_W1_EEPROM,
+ .of_match = eep_sandbox_id,
+ .ops = &eep_sandbox_ops,
+};
diff --git a/drivers/w1-eeprom/w1-eeprom-uclass.c b/drivers/w1-eeprom/w1-eeprom-uclass.c
new file mode 100644
index 0000000..7b05793
--- /dev/null
+++ b/drivers/w1-eeprom/w1-eeprom-uclass.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co.
+ * Copyright (c) 2018 Microchip Technology, Inc.
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Eugen Hristev <eugen.hristev@microchip.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <w1.h>
+#include <w1-eeprom.h>
+
+#include <dm/device-internal.h>
+
+int w1_eeprom_read_buf(struct udevice *dev, unsigned int offset,
+ u8 *buf, unsigned int count)
+{
+ const struct w1_eeprom_ops *ops = device_get_ops(dev);
+ u64 id = 0;
+ int ret;
+
+ if (!ops->read_buf)
+ return -ENOSYS;
+
+ ret = w1_eeprom_get_id(dev, &id);
+ if (ret)
+ return ret;
+ if (!id)
+ return -ENODEV;
+
+ return ops->read_buf(dev, offset, buf, count);
+}
+
+int w1_eeprom_register_new_device(u64 id)
+{
+ u8 family = id & 0xff;
+ int ret;
+ struct udevice *dev;
+
+ for (ret = uclass_first_device(UCLASS_W1_EEPROM, &dev);
+ !ret && dev;
+ uclass_next_device(&dev)) {
+ if (ret || !dev) {
+ debug("cannot find w1 eeprom dev\n");
+ return ret;
+ }
+ if (dev_get_driver_data(dev) == family) {
+ struct w1_device *w1;
+
+ w1 = dev_get_parent_platdata(dev);
+ if (w1->id) /* device already in use */
+ continue;
+ w1->id = id;
+ debug("%s: Match found: %s:%s %llx\n", __func__,
+ dev->name, dev->driver->name, id);
+ return 0;
+ }
+ }
+
+ debug("%s: No matches found: error %d\n", __func__, ret);
+
+ return ret;
+}
+
+int w1_eeprom_get_id(struct udevice *dev, u64 *id)
+{
+ struct w1_device *w1 = dev_get_parent_platdata(dev);
+
+ if (!w1)
+ return -ENODEV;
+ *id = w1->id;
+
+ return 0;
+}
+
+UCLASS_DRIVER(w1_eeprom) = {
+ .name = "w1_eeprom",
+ .id = UCLASS_W1_EEPROM,
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ .post_bind = dm_scan_fdt_dev,
+#endif
+};
+
+int w1_eeprom_dm_init(void)
+{
+ struct udevice *dev;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(UCLASS_W1_EEPROM, &uc);
+ if (ret) {
+ debug("W1_EEPROM uclass not available\n");
+ return ret;
+ }
+
+ uclass_foreach_dev(dev, uc) {
+ ret = device_probe(dev);
+ if (ret == -ENODEV) { /* No such device. */
+ debug("W1_EEPROM not available.\n");
+ continue;
+ }
+
+ if (ret) { /* Other error. */
+ printf("W1_EEPROM probe failed, error %d\n", ret);
+ continue;
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
new file mode 100644
index 0000000..d6e0457
--- /dev/null
+++ b/drivers/w1/Kconfig
@@ -0,0 +1,25 @@
+#
+# W1 subsystem configuration
+#
+
+menu "1-Wire support"
+
+config W1
+ bool "Enable 1-wire controllers support"
+ default no
+ depends on DM
+ help
+ Support for the Dallas 1-Wire bus.
+
+if W1
+
+config W1_GPIO
+ bool "Enable 1-wire GPIO bitbanging"
+ default no
+ depends on DM_GPIO
+ help
+ Emulate a 1-wire bus using a GPIO.
+
+endif
+
+endmenu
diff --git a/drivers/w1/Makefile b/drivers/w1/Makefile
new file mode 100644
index 0000000..7fd8697
--- /dev/null
+++ b/drivers/w1/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_W1) += w1-uclass.o
+
+obj-$(CONFIG_W1_GPIO) += w1-gpio.o
diff --git a/drivers/w1/w1-gpio.c b/drivers/w1/w1-gpio.c
new file mode 100644
index 0000000..5e5d6b3
--- /dev/null
+++ b/drivers/w1/w1-gpio.c
@@ -0,0 +1,176 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <w1.h>
+
+#include <asm/gpio.h>
+
+#define W1_TIMING_A 6
+#define W1_TIMING_B 64
+#define W1_TIMING_C 60
+#define W1_TIMING_D 10
+#define W1_TIMING_E 9
+#define W1_TIMING_F 55
+#define W1_TIMING_G 0
+#define W1_TIMING_H 480
+#define W1_TIMING_I 70
+#define W1_TIMING_J 410
+
+struct w1_gpio_pdata {
+ struct gpio_desc gpio;
+ u64 search_id;
+};
+
+static bool w1_gpio_read_bit(struct udevice *dev)
+{
+ struct w1_gpio_pdata *pdata = dev_get_platdata(dev);
+ int val;
+
+ dm_gpio_set_dir_flags(&pdata->gpio, GPIOD_IS_OUT);
+ udelay(W1_TIMING_A);
+
+ dm_gpio_set_dir_flags(&pdata->gpio, GPIOD_IS_IN);
+ udelay(W1_TIMING_E);
+
+ val = dm_gpio_get_value(&pdata->gpio);
+ if (val < 0)
+ debug("error in retrieving GPIO value");
+ udelay(W1_TIMING_F);
+
+ return val;
+}
+
+static u8 w1_gpio_read_byte(struct udevice *dev)
+{
+ int i;
+ u8 ret = 0;
+
+ for (i = 0; i < 8; ++i)
+ ret |= (w1_gpio_read_bit(dev) ? 1 : 0) << i;
+
+ return ret;
+}
+
+static void w1_gpio_write_bit(struct udevice *dev, bool bit)
+{
+ struct w1_gpio_pdata *pdata = dev_get_platdata(dev);
+
+ dm_gpio_set_dir_flags(&pdata->gpio, GPIOD_IS_OUT);
+
+ bit ? udelay(W1_TIMING_A) : udelay(W1_TIMING_C);
+
+ dm_gpio_set_value(&pdata->gpio, 1);
+
+ bit ? udelay(W1_TIMING_B) : udelay(W1_TIMING_D);
+}
+
+static void w1_gpio_write_byte(struct udevice *dev, u8 byte)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ w1_gpio_write_bit(dev, (byte >> i) & 0x1);
+}
+
+static bool w1_gpio_reset(struct udevice *dev)
+{
+ struct w1_gpio_pdata *pdata = dev_get_platdata(dev);
+ int val;
+
+ /* initiate the reset pulse. first we must pull the bus to low */
+ dm_gpio_set_dir_flags(&pdata->gpio, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ udelay(W1_TIMING_G);
+
+ dm_gpio_set_value(&pdata->gpio, 0);
+ /* wait for the specified time with the bus kept low */
+ udelay(W1_TIMING_H);
+
+ /* now we must read the presence pulse */
+ dm_gpio_set_dir_flags(&pdata->gpio, GPIOD_IS_IN);
+ udelay(W1_TIMING_I);
+
+ val = dm_gpio_get_value(&pdata->gpio);
+ if (val < 0)
+ debug("error in retrieving GPIO value");
+
+ /* if nobody pulled the bus down , it means nobody is on the bus */
+ if (val != 0)
+ return 1;
+ /* we have the bus pulled down, let's wait for the specified presence time */
+ udelay(W1_TIMING_J);
+
+ /* read again, the other end should leave the bus free */
+ val = dm_gpio_get_value(&pdata->gpio);
+ if (val < 0)
+ debug("error in retrieving GPIO value");
+
+ /* bus is not going up again, so we have an error */
+ if (val != 1)
+ return 1;
+
+ /* all good, presence detected */
+ return 0;
+}
+
+static u8 w1_gpio_triplet(struct udevice *dev, bool bdir)
+{
+ u8 id_bit = w1_gpio_read_bit(dev);
+ u8 comp_bit = w1_gpio_read_bit(dev);
+ u8 retval;
+
+ if (id_bit && comp_bit)
+ return 0x03; /* error */
+
+ if (!id_bit && !comp_bit) {
+ /* Both bits are valid, take the direction given */
+ retval = bdir ? 0x04 : 0;
+ } else {
+ /* Only one bit is valid, take that direction */
+ bdir = id_bit;
+ retval = id_bit ? 0x05 : 0x02;
+ }
+
+ w1_gpio_write_bit(dev, bdir);
+ return retval;
+}
+
+static const struct w1_ops w1_gpio_ops = {
+ .read_byte = w1_gpio_read_byte,
+ .reset = w1_gpio_reset,
+ .triplet = w1_gpio_triplet,
+ .write_byte = w1_gpio_write_byte,
+};
+
+static int w1_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+ struct w1_gpio_pdata *pdata = dev_get_platdata(dev);
+ int ret;
+
+ ret = gpio_request_by_name(dev, "gpios", 0, &pdata->gpio, 0);
+ if (ret < 0)
+ printf("Error claiming GPIO %d\n", ret);
+
+ return ret;
+};
+
+static const struct udevice_id w1_gpio_id[] = {
+ { "w1-gpio", 0 },
+ { },
+};
+
+U_BOOT_DRIVER(w1_gpio_drv) = {
+ .id = UCLASS_W1,
+ .name = "w1_gpio_drv",
+ .of_match = w1_gpio_id,
+ .ofdata_to_platdata = w1_gpio_ofdata_to_platdata,
+ .ops = &w1_gpio_ops,
+ .platdata_auto_alloc_size = sizeof(struct w1_gpio_pdata),
+};
diff --git a/drivers/w1/w1-uclass.c b/drivers/w1/w1-uclass.c
new file mode 100644
index 0000000..aecf7fe
--- /dev/null
+++ b/drivers/w1/w1-uclass.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co.
+ * Copyright (c) 2018 Microchip Technology, Inc.
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Eugen Hristev <eugen.hristev@microchip.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <w1.h>
+#include <w1-eeprom.h>
+
+#include <dm/device-internal.h>
+
+#define W1_MATCH_ROM 0x55
+#define W1_SKIP_ROM 0xcc
+#define W1_SEARCH 0xf0
+
+struct w1_bus {
+ u64 search_id;
+};
+
+static int w1_enumerate(struct udevice *bus)
+{
+ const struct w1_ops *ops = device_get_ops(bus);
+ struct w1_bus *w1 = dev_get_uclass_priv(bus);
+ u64 last_rn, rn = w1->search_id, tmp64;
+ bool last_device = false;
+ int search_bit, desc_bit = 64;
+ int last_zero = -1;
+ u8 triplet_ret = 0;
+ int i;
+
+ if (!ops->reset || !ops->write_byte || !ops->triplet)
+ return -ENOSYS;
+
+ while (!last_device) {
+ last_rn = rn;
+ rn = 0;
+
+ /*
+ * Reset bus and all 1-wire device state machines
+ * so they can respond to our requests.
+ *
+ * Return 0 - device(s) present, 1 - no devices present.
+ */
+ if (ops->reset(bus)) {
+ debug("%s: No devices present on the wire.\n",
+ __func__);
+ break;
+ }
+
+ /* Start the search */
+ ops->write_byte(bus, W1_SEARCH);
+ for (i = 0; i < 64; ++i) {
+ /* Determine the direction/search bit */
+ if (i == desc_bit)
+ /* took the 0 path last time, so take the 1 path */
+ search_bit = 1;
+ else if (i > desc_bit)
+ /* take the 0 path on the next branch */
+ search_bit = 0;
+ else
+ search_bit = ((last_rn >> i) & 0x1);
+
+ /* Read two bits and write one bit */
+ triplet_ret = ops->triplet(bus, search_bit);
+
+ /* quit if no device responded */
+ if ((triplet_ret & 0x03) == 0x03)
+ break;
+
+ /* If both directions were valid, and we took the 0 path... */
+ if (triplet_ret == 0)
+ last_zero = i;
+
+ /* extract the direction taken & update the device number */
+ tmp64 = (triplet_ret >> 2);
+ rn |= (tmp64 << i);
+ }
+
+ /* last device or error, aborting here */
+ if ((triplet_ret & 0x03) == 0x03)
+ last_device = true;
+
+ if ((triplet_ret & 0x03) != 0x03) {
+ if (desc_bit == last_zero || last_zero < 0) {
+ last_device = 1;
+ w1->search_id = 0;
+ } else {
+ w1->search_id = rn;
+ }
+ desc_bit = last_zero;
+
+ debug("%s: Detected new device 0x%llx (family 0x%x)\n",
+ bus->name, rn, (u8)(rn & 0xff));
+
+ /* attempt to register as w1-eeprom device */
+ w1_eeprom_register_new_device(rn);
+ }
+ }
+
+ return 0;
+}
+
+int w1_get_bus(int busnum, struct udevice **busp)
+{
+ int ret, i = 0;
+
+ struct udevice *dev;
+
+ for (ret = uclass_first_device(UCLASS_W1, &dev);
+ !ret;
+ uclass_next_device(&dev), i++) {
+ if (ret) {
+ debug("Cannot find w1 bus %d\n", busnum);
+ return ret;
+ }
+ if (i == busnum) {
+ *busp = dev;
+ return 0;
+ }
+ }
+ return ret;
+}
+
+u8 w1_get_device_family(struct udevice *dev)
+{
+ struct w1_device *w1 = dev_get_parent_platdata(dev);
+
+ return w1->id & 0xff;
+}
+
+int w1_reset_select(struct udevice *dev)
+{
+ struct w1_device *w1 = dev_get_parent_platdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ const struct w1_ops *ops = device_get_ops(bus);
+ int i;
+
+ if (!ops->reset || !ops->write_byte)
+ return -ENOSYS;
+
+ ops->reset(bus);
+
+ ops->write_byte(bus, W1_MATCH_ROM);
+
+ for (i = 0; i < sizeof(w1->id); i++)
+ ops->write_byte(bus, (w1->id >> (i * 8)) & 0xff);
+
+ return 0;
+}
+
+int w1_read_byte(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ const struct w1_ops *ops = device_get_ops(bus);
+
+ if (!ops->read_byte)
+ return -ENOSYS;
+
+ return ops->read_byte(bus);
+}
+
+int w1_read_buf(struct udevice *dev, u8 *buf, unsigned int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ ret = w1_read_byte(dev);
+ if (ret < 0)
+ return ret;
+
+ buf[i] = ret & 0xff;
+ }
+
+ return 0;
+}
+
+int w1_write_byte(struct udevice *dev, u8 byte)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ const struct w1_ops *ops = device_get_ops(bus);
+
+ if (!ops->write_byte)
+ return -ENOSYS;
+
+ ops->write_byte(bus, byte);
+
+ return 0;
+}
+
+static int w1_post_probe(struct udevice *bus)
+{
+ w1_enumerate(bus);
+
+ return 0;
+}
+
+int w1_init(void)
+{
+ struct udevice *bus;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(UCLASS_W1, &uc);
+ if (ret)
+ return ret;
+
+ uclass_foreach_dev(bus, uc) {
+ ret = device_probe(bus);
+ if (ret == -ENODEV) { /* No such device. */
+ printf("W1 controller not available.\n");
+ continue;
+ }
+
+ if (ret) { /* Other error. */
+ printf("W1 controller probe failed.\n");
+ continue;
+ }
+ }
+ return 0;
+}
+
+UCLASS_DRIVER(w1) = {
+ .name = "w1",
+ .id = UCLASS_W1,
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
+ .per_device_auto_alloc_size = sizeof(struct w1_bus),
+ .post_probe = w1_post_probe,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ .post_bind = dm_scan_fdt_dev,
+#endif
+ .per_child_platdata_auto_alloc_size = sizeof(struct w1_device),
+};
diff --git a/dts/Makefile b/dts/Makefile
index 36dfbe7..9a9a3d5 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -61,4 +61,4 @@
clean-files := dt.dtb.S dt-spl.dtb.S
# Let clean descend into dts directories
-subdir- += ../arch/arm/dts ../arch/microblaze/dts ../arch/mips/dts ../arch/sandbox/dts ../arch/x86/dts
+subdir- += ../arch/arm/dts ../arch/microblaze/dts ../arch/mips/dts ../arch/sandbox/dts ../arch/x86/dts ../arch/powerpc/dts
diff --git a/include/blk.h b/include/blk.h
index 86f6d50..6af2196 100644
--- a/include/blk.h
+++ b/include/blk.h
@@ -406,6 +406,15 @@
*/
int blk_get_from_parent(struct udevice *parent, struct udevice **devp);
+/**
+ * blk_get_by_device() - Get the block device descriptor for the given device
+ * @dev: Instance of a storage device
+ *
+ * Return: With block device descriptor on success , NULL if there is no such
+ * block device.
+ */
+struct blk_desc *blk_get_by_device(struct udevice *dev);
+
#else
#include <errno.h>
/*
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 8a38c5e..191616b 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -659,7 +659,6 @@
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_QE
-#define CONFIG_U_QE
/* Default address of microcode for the Linux FMan driver */
#if defined(CONFIG_SPIFLASH)
/*
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index f7a54f7..ac5de8d 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -669,7 +669,6 @@
#ifdef CONFIG_TARGET_T1024RDB
#define CONFIG_QE
-#define CONFIG_U_QE
#endif
/* Default address of microcode for the Linux FMan driver */
#if defined(CONFIG_SPIFLASH)
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index e890860..25615be 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -549,7 +549,6 @@
#define CONFIG_SYS_DPAA_PME
#define CONFIG_QE
-#define CONFIG_U_QE
/* Default address of microcode for the Linux Fman driver */
#if defined(CONFIG_SPIFLASH)
/*
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 14a6b9e..319f6aa 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -116,7 +116,7 @@
* Serial Driver info
*/
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_DIRECT_NOR_BOOT)
+#if !CONFIG_IS_ENABLED(DM_SERIAL)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 8129595..e450002 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -9,9 +9,9 @@
#include "ls1012a_common.h"
/* Board Rev*/
-#define BOARD_REV_A 0x0
-#define BOARD_REV_B 0x200
-
+#define BOARD_REV_A_B 0x0
+#define BOARD_REV_C 0x00080000
+#define BOARD_REV_MASK 0x001A0000
/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 994e6ca..7f7ffde 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -107,7 +107,6 @@
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 75b2e2f..ddd024e 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -106,7 +106,6 @@
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index bc639e5..ffd92db 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -268,13 +268,6 @@
#endif
#endif
-/* QE */
-#ifndef SPL_NO_QE
-#if !defined(CONFIG_NAND_BOOT) && !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
-#endif
-#endif
-
/* SATA */
#ifndef SPL_NO_SATA
#ifndef CONFIG_CMD_EXT2
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index eb220bf..363154a 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -455,8 +455,7 @@
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
- func(SCSI, scsi, 0) \
- func(DHCP, dhcp, na)
+ func(SCSI, scsi, 0)
#include <config_distro_bootcmd.h>
#endif
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 3d53a69..05c02df 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -323,8 +323,7 @@
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0) \
func(MMC, mmc, 0) \
- func(SCSI, scsi, 0) \
- func(DHCP, dhcp, na)
+ func(SCSI, scsi, 0)
#include <config_distro_bootcmd.h>
#ifdef CONFIG_QSPI_BOOT
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 7027ea0..e6fc3ab 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -37,6 +37,7 @@
UCLASS_DMA, /* Direct Memory Access */
UCLASS_EFI, /* EFI managed devices */
UCLASS_ETH, /* Ethernet device */
+ UCLASS_FS_FIRMWARE_LOADER, /* Generic loader */
UCLASS_GPIO, /* Bank of general-purpose I/O pins */
UCLASS_FIRMWARE, /* Firmware */
UCLASS_I2C, /* I2C bus */
@@ -92,6 +93,8 @@
UCLASS_VIDEO, /* Video or LCD device */
UCLASS_VIDEO_BRIDGE, /* Video bridge, e.g. DisplayPort to LVDS */
UCLASS_VIDEO_CONSOLE, /* Text console driver for video device */
+ UCLASS_W1, /* Dallas 1-Wire bus */
+ UCLASS_W1_EEPROM, /* one-wire EEPROMs */
UCLASS_WDT, /* Watchdot Timer driver */
UCLASS_COUNT,
diff --git a/include/fs_loader.h b/include/fs_loader.h
new file mode 100644
index 0000000..0be4f17
--- /dev/null
+++ b/include/fs_loader.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2018 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#ifndef _FS_LOADER_H_
+#define _FS_LOADER_H_
+
+#include <dm.h>
+
+/**
+ * struct firmware - A place for storing firmware and its attribute data.
+ *
+ * This holds information about a firmware and its content.
+ *
+ * @size: Size of a file
+ * @data: Buffer for file
+ * @priv: Firmware loader private fields
+ */
+struct firmware {
+ size_t size;
+ const u8 *data;
+ void *priv;
+};
+
+/**
+ * struct phandle_part - A place for storing phandle of node and its partition
+ *
+ * This holds information about a phandle of the block device, and its
+ * partition where the firmware would be loaded from.
+ *
+ * @phandle: Phandle of storage device node
+ * @partition: Partition of block device
+ */
+struct phandle_part {
+ u32 phandle;
+ u32 partition;
+};
+
+/**
+ * struct phandle_part - A place for storing all supported storage devices
+ *
+ * This holds information about all supported storage devices for driver use.
+ *
+ * @phandlepart: Attribute data for block device.
+ * @mtdpart: MTD partition for ubi partition.
+ * @ubivol: UBI volume-name for ubifsmount.
+ */
+struct device_platdata {
+ struct phandle_part phandlepart;
+ char *mtdpart;
+ char *ubivol;
+};
+
+/**
+ * release_firmware - Release the resource associated with a firmware image
+ * @firmware: Firmware resource to release
+ */
+void release_firmware(struct firmware *firmware);
+
+/**
+ * request_firmware_into_buf - Load firmware into a previously allocated buffer.
+ * @plat: Platform data such as storage and partition firmware loading from.
+ * @name: Name of firmware file.
+ * @buf: Address of buffer to load firmware into.
+ * @size: Size of buffer.
+ * @offset: Offset of a file for start reading into buffer.
+ * @firmwarep: Pointer to firmware image.
+ *
+ * The firmware is loaded directly into the buffer pointed to by @buf and
+ * the @firmwarep data member is pointed at @buf.
+ *
+ * Return: Size of total read, negative value when error.
+ */
+int request_firmware_into_buf(struct device_platdata *plat,
+ const char *name,
+ void *buf, size_t size, u32 offset,
+ struct firmware **firmwarep);
+#endif
diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h
index 7f4859b..aef40d3 100644
--- a/include/fsl-mc/fsl_mc.h
+++ b/include/fsl-mc/fsl_mc.h
@@ -51,6 +51,7 @@
u32 reg_error[];
};
+void fdt_fsl_mc_fixup_iommu_map_entry(void *blob);
int get_mc_boot_status(void);
int get_dpl_apply_status(void);
#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
index 80acbcb..0770228 100644
--- a/include/ubi_uboot.h
+++ b/include/ubi_uboot.h
@@ -75,5 +75,7 @@
extern int ubi_volume_read(char *volume, char *buf, size_t size);
extern struct ubi_device *ubi_devices[];
+int cmd_ubifs_mount(char *vol_name);
+int cmd_ubifs_umount(void);
#endif
diff --git a/include/w1-eeprom.h b/include/w1-eeprom.h
new file mode 100644
index 0000000..2233736
--- /dev/null
+++ b/include/w1-eeprom.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co
+ * Copyright (c) 2018 Microchip Technology, Inc.
+ *
+ */
+
+#ifndef __W1_EEPROM_H
+#define __W1_EEPROM_H
+
+struct udevice;
+
+struct w1_eeprom_ops {
+ /*
+ * Reads a buff from the given EEPROM memory, starting at
+ * given offset and place the results into the given buffer.
+ * Should read given count of bytes.
+ * Should return 0 on success, and normal error.h on error
+ */
+ int (*read_buf)(struct udevice *dev, unsigned int offset,
+ u8 *buf, unsigned int count);
+};
+
+int w1_eeprom_read_buf(struct udevice *dev, unsigned int offset,
+ u8 *buf, unsigned int count);
+
+int w1_eeprom_dm_init(void);
+
+int w1_eeprom_register_new_device(u64 id);
+
+int w1_eeprom_get_id(struct udevice *dev, u64 *id);
+#endif
diff --git a/include/w1.h b/include/w1.h
new file mode 100644
index 0000000..399177a
--- /dev/null
+++ b/include/w1.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (c) 2015 Free Electrons
+ * Copyright (c) 2015 NextThing Co
+ *
+ */
+
+#ifndef __W1_H
+#define __W1_H
+
+#include <dm.h>
+
+#define W1_FAMILY_DS24B33 0x23
+#define W1_FAMILY_DS2431 0x2d
+#define W1_FAMILY_EEP_SANDBOX 0xfe
+
+struct w1_device {
+ u64 id;
+};
+
+struct w1_ops {
+ u8 (*read_byte)(struct udevice *dev);
+ bool (*reset)(struct udevice *dev);
+ u8 (*triplet)(struct udevice *dev, bool bdir);
+ void (*write_byte)(struct udevice *dev, u8 byte);
+};
+
+int w1_get_bus(int busnum, struct udevice **busp);
+u8 w1_get_device_family(struct udevice *dev);
+
+int w1_read_buf(struct udevice *dev, u8 *buf, unsigned int count);
+int w1_read_byte(struct udevice *dev);
+int w1_reset_select(struct udevice *dev);
+int w1_write_buf(struct udevice *dev, u8 *buf, unsigned int count);
+int w1_write_byte(struct udevice *dev, u8 byte);
+
+#endif
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 03e4d28..96d3f75 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -366,7 +366,6 @@
CONFIG_DIALOG_POWER
CONFIG_DIMM_SLOTS_PER_CTLR
CONFIG_DIRECT_NOR_BOOT
-CONFIG_DISABLE_CONSOLE
CONFIG_DISCONTIGMEM
CONFIG_DISCOVER_PHY
CONFIG_DISPLAY_AER_xxxx
@@ -4631,7 +4630,6 @@
CONFIG_UTBIPAR_INIT_TBIPA
CONFIG_U_BOOT_HDR_ADDR
CONFIG_U_BOOT_HDR_SIZE
-CONFIG_U_QE
CONFIG_VAL
CONFIG_VAR_SIZE_SPL
CONFIG_VCT_NOR
diff --git a/tools/binman/README b/tools/binman/README
index 9d9d183..5062f30 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -397,6 +397,15 @@
8MB ROM, the offset of the first entry would be 0xfff80000 with
this option, instead of 0 without this option.
+skip-at-start:
+ This property specifies the entry offset of the first entry.
+
+ For PowerPC mpc85xx based CPU, CONFIG_SYS_TEXT_BASE is the entry
+ offset of the first entry. It can be 0xeff40000 or 0xfff40000 for
+ nor flash boot, 0x201000 for sd boot etc.
+
+ 'end-at-4gb' property is not applicable where CONFIG_SYS_TEXT_BASE +
+ Image size != 4gb.
Examples of the above options can be found in the tests. See the
tools/binman/test directory.
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index c6e7b22..6c78fb3 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -221,6 +221,18 @@
+Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code for U-Boot
+-----------------------------------------------------------------------------------------
+
+Properties / Entry arguments:
+ - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
+
+This enrty is valid for PowerPC mpc85xx cpus. This entry holds
+'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
+placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
+
+
+
Entry: section: Entry that contains other entries
-------------------------------------------------
@@ -543,7 +555,7 @@
- kernelkey: Name of the kernel key to use (inside keydir)
- preamble-flags: Value of the vboot preamble flags (typically 0)
-Chromium OS signs the read-write firmware and kernel, writing the signature
+Chromium OS signs the read-write firmware and kernel, writing the signature
in this block. This allows U-Boot to verify that the next firmware stage
and kernel are genuine.
diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py
index a0bd1b6..5910092 100644
--- a/tools/binman/bsection.py
+++ b/tools/binman/bsection.py
@@ -59,7 +59,7 @@
self._pad_after = 0
self._pad_byte = 0
self._sort = False
- self._skip_at_start = 0
+ self._skip_at_start = None
self._end_4gb = False
self._name_prefix = ''
self._entries = OrderedDict()
@@ -79,10 +79,17 @@
self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0)
self._sort = fdt_util.GetBool(self._node, 'sort-by-offset')
self._end_4gb = fdt_util.GetBool(self._node, 'end-at-4gb')
- if self._end_4gb and not self._size:
- self._Raise("Section size must be provided when using end-at-4gb")
+ self._skip_at_start = fdt_util.GetInt(self._node, 'skip-at-start')
if self._end_4gb:
- self._skip_at_start = 0x100000000 - self._size
+ if not self._size:
+ self._Raise("Section size must be provided when using end-at-4gb")
+ if self._skip_at_start is not None:
+ self._Raise("Provide either 'end-at-4gb' or 'skip-at-start'")
+ else:
+ self._skip_at_start = 0x100000000 - self._size
+ else:
+ if self._skip_at_start is None:
+ self._skip_at_start = 0
self._name_prefix = fdt_util.GetString(self._node, 'name-prefix')
def _ReadEntries(self):
diff --git a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
new file mode 100644
index 0000000..59fedd2
--- /dev/null
+++ b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright 2018 NXP
+#
+# Entry-type module for the PowerPC mpc85xx bootpg and resetvec code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob):
+ """PowerPC mpc85xx bootpg + resetvec code for U-Boot
+
+ Properties / Entry arguments:
+ - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
+
+ This enrty is valid for PowerPC mpc85xx cpus. This entry holds
+ 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
+ placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
+ """
+
+ def __init__(self, section, etype, node):
+ Entry_blob.__init__(self, section, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot-br.bin'
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index a8456c2..924701a 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -39,6 +39,7 @@
U_BOOT_TPL_DTB_DATA = 'tpldtb'
X86_START16_DATA = 'start16'
X86_START16_SPL_DATA = 'start16spl'
+PPC_MPC85XX_BR_DATA = 'ppcmpc85xxbr'
U_BOOT_NODTB_DATA = 'nodtb with microcode pointer somewhere in here'
U_BOOT_SPL_NODTB_DATA = 'splnodtb with microcode pointer somewhere in here'
FSP_DATA = 'fsp'
@@ -90,6 +91,7 @@
TestFunctional._MakeInputFile('vga.bin', VGA_DATA)
self._ResetDtbs()
TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA)
+ TestFunctional._MakeInputFile('u-boot-br.bin', PPC_MPC85XX_BR_DATA)
TestFunctional._MakeInputFile('spl/u-boot-x86-16bit-spl.bin',
X86_START16_SPL_DATA)
TestFunctional._MakeInputFile('u-boot-nodtb.bin', U_BOOT_NODTB_DATA)
@@ -711,6 +713,14 @@
self.assertIn("Section '/binman': Section size must be provided when "
"using end-at-4gb", str(e.exception))
+ def test4gbAndSkipAtStartTogether(self):
+ """Test that the end-at-4gb and skip-at-size property can't be used
+ together"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('80_4gb_and_skip_at_start_together.dts')
+ self.assertIn("Section '/binman': Provide either 'end-at-4gb' or "
+ "'skip-at-start'", str(e.exception))
+
def testPackX86RomOutside(self):
"""Test that the end-at-4gb property checks for offset boundaries"""
with self.assertRaises(ValueError) as e:
@@ -756,6 +766,12 @@
data = self._DoReadFile('33_x86-start16.dts')
self.assertEqual(X86_START16_DATA, data[:len(X86_START16_DATA)])
+ def testPackPowerpcMpc85xxBootpgResetvec(self):
+ """Test that an image with powerpc-mpc85xx-bootpg-resetvec can be
+ created"""
+ data = self._DoReadFile('81_powerpc_mpc85xx_bootpg_resetvec.dts')
+ self.assertEqual(PPC_MPC85XX_BR_DATA, data[:len(PPC_MPC85XX_BR_DATA)])
+
def _RunMicrocodeTest(self, dts_fname, nodtb_data, ucode_second=False):
"""Handle running a test for insertion of microcode
diff --git a/tools/binman/test/80_4gb_and_skip_at_start_together.dts b/tools/binman/test/80_4gb_and_skip_at_start_together.dts
new file mode 100644
index 0000000..90c467d
--- /dev/null
+++ b/tools/binman/test/80_4gb_and_skip_at_start_together.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <32>;
+ sort-by-offset;
+ end-at-4gb;
+ skip-at-start = <0xffffffe0>;
+ u-boot {
+ offset = <0xffffffe0>;
+ };
+ };
+};
diff --git a/tools/binman/test/81_powerpc_mpc85xx_bootpg_resetvec.dts b/tools/binman/test/81_powerpc_mpc85xx_bootpg_resetvec.dts
new file mode 100644
index 0000000..8f4b16c
--- /dev/null
+++ b/tools/binman/test/81_powerpc_mpc85xx_bootpg_resetvec.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ powerpc-mpc85xx-bootpg-resetvec {
+ };
+ };
+};