ram: move aspeed ram driver into drivers/ directory
to improve the maintainability. It is more easier to modify and add
configurations of the driver in the centralized ram driver directory.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
diff --git a/arch/arm/mach-aspeed/ast2500/Makefile b/arch/arm/mach-aspeed/ast2500/Makefile
index 4c27c8f..db70432 100644
--- a/arch/arm/mach-aspeed/ast2500/Makefile
+++ b/arch/arm/mach-aspeed/ast2500/Makefile
@@ -1,3 +1,3 @@
obj-y += lowlevel_init.o
obj-y += board_common.o
-obj-y += clk_ast2500.o sdram_ast2500.o
+obj-y += clk_ast2500.o
diff --git a/arch/arm/mach-aspeed/ast2500/sdram_ast2500.c b/arch/arm/mach-aspeed/ast2500/sdram_ast2500.c
deleted file mode 100644
index 8536a70..0000000
--- a/arch/arm/mach-aspeed/ast2500/sdram_ast2500.c
+++ /dev/null
@@ -1,439 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012-2020 ASPEED Technology Inc.
- *
- * Copyright 2016 Google, Inc
- */
-
-#include <common.h>
-#include <clk.h>
-#include <dm.h>
-#include <errno.h>
-#include <log.h>
-#include <ram.h>
-#include <regmap.h>
-#include <reset.h>
-#include <asm/io.h>
-#include <asm/arch/scu_ast2500.h>
-#include <asm/arch/sdram_ast2500.h>
-#include <asm/arch/wdt.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <dt-bindings/clock/aspeed-clock.h>
-
-/* These configuration parameters are taken from Aspeed SDK */
-#define DDR4_MR46_MODE 0x08000000
-#define DDR4_MR5_MODE 0x400
-#define DDR4_MR13_MODE 0x101
-#define DDR4_MR02_MODE 0x410
-#define DDR4_TRFC 0x45457188
-
-#define PHY_CFG_SIZE 15
-
-static const u32 ddr4_ac_timing[3] = {0x63604e37, 0xe97afa99, 0x00019000};
-static const struct {
- u32 index[PHY_CFG_SIZE];
- u32 value[PHY_CFG_SIZE];
-} ddr4_phy_config = {
- .index = {0, 1, 3, 4, 5, 56, 57, 58, 59, 60, 61, 62, 36, 49, 50},
- .value = {
- 0x42492aae, 0x09002000, 0x55e00b0b, 0x20000000, 0x24,
- 0x03002900, 0x0e0000a0, 0x000e001c, 0x35b8c106, 0x08080607,
- 0x9b000900, 0x0e400a00, 0x00100008, 0x3c183c3c, 0x00631e0e,
- },
-};
-
-#define SDRAM_MAX_SIZE (1024 * 1024 * 1024)
-#define SDRAM_MIN_SIZE (128 * 1024 * 1024)
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Bandwidth configuration parameters for different SDRAM requests.
- * These are hardcoded settings taken from Aspeed SDK.
- */
-static const u32 ddr_max_grant_params[4] = {
- 0x88448844, 0x24422288, 0x22222222, 0x22222222
-};
-
-/*
- * These registers are not documented by Aspeed at all.
- * All writes and reads are taken pretty much as is from SDK.
- */
-struct ast2500_ddr_phy {
- u32 phy[117];
-};
-
-struct dram_info {
- struct ram_info info;
- struct clk ddr_clk;
- struct ast2500_sdrammc_regs *regs;
- struct ast2500_scu *scu;
- struct ast2500_ddr_phy *phy;
- ulong clock_rate;
-};
-
-static int ast2500_sdrammc_init_phy(struct ast2500_ddr_phy *phy)
-{
- writel(0, &phy->phy[2]);
- writel(0, &phy->phy[6]);
- writel(0, &phy->phy[8]);
- writel(0, &phy->phy[10]);
- writel(0, &phy->phy[12]);
- writel(0, &phy->phy[42]);
- writel(0, &phy->phy[44]);
-
- writel(0x86000000, &phy->phy[16]);
- writel(0x00008600, &phy->phy[17]);
- writel(0x80000000, &phy->phy[18]);
- writel(0x80808080, &phy->phy[19]);
-
- return 0;
-}
-
-static void ast2500_ddr_phy_init_process(struct dram_info *info)
-{
- struct ast2500_sdrammc_regs *regs = info->regs;
-
- writel(0, ®s->phy_ctrl[0]);
- writel(0x4040, &info->phy->phy[51]);
-
- writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, ®s->phy_ctrl[0]);
- while ((readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT))
- ;
- writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_AUTO_UPDATE,
- ®s->phy_ctrl[0]);
-}
-
-static void ast2500_sdrammc_set_vref(struct dram_info *info, u32 vref)
-{
- writel(0, &info->regs->phy_ctrl[0]);
- writel((vref << 8) | 0x6, &info->phy->phy[48]);
- ast2500_ddr_phy_init_process(info);
-}
-
-static int ast2500_ddr_cbr_test(struct dram_info *info)
-{
- struct ast2500_sdrammc_regs *regs = info->regs;
- int i;
- const u32 test_params = SDRAM_TEST_EN
- | SDRAM_TEST_ERRSTOP
- | SDRAM_TEST_TWO_MODES;
- int ret = 0;
-
- writel((1 << SDRAM_REFRESH_CYCLES_SHIFT) |
- (0x5c << SDRAM_REFRESH_PERIOD_SHIFT), ®s->refresh_timing);
- writel((0xfff << SDRAM_TEST_LEN_SHIFT), ®s->test_addr);
- writel(0xff00ff00, ®s->test_init_val);
- writel(SDRAM_TEST_EN | (SDRAM_TEST_MODE_RW << SDRAM_TEST_MODE_SHIFT) |
- SDRAM_TEST_ERRSTOP, ®s->ecc_test_ctrl);
-
- while (!(readl(®s->ecc_test_ctrl) & SDRAM_TEST_DONE))
- ;
-
- if (readl(®s->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
- ret = -EIO;
- } else {
- for (i = 0; i <= SDRAM_TEST_GEN_MODE_MASK; ++i) {
- writel((i << SDRAM_TEST_GEN_MODE_SHIFT) | test_params,
- ®s->ecc_test_ctrl);
- while (!(readl(®s->ecc_test_ctrl) & SDRAM_TEST_DONE))
- ;
- if (readl(®s->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
- ret = -EIO;
- break;
- }
- }
- }
-
- writel(0, ®s->refresh_timing);
- writel(0, ®s->ecc_test_ctrl);
-
- return ret;
-}
-
-static int ast2500_sdrammc_ddr4_calibrate_vref(struct dram_info *info)
-{
- int i;
- int vref_min = 0xff;
- int vref_max = 0;
- int range_size = 0;
-
- for (i = 1; i < 0x40; ++i) {
- int res;
-
- ast2500_sdrammc_set_vref(info, i);
- res = ast2500_ddr_cbr_test(info);
- if (res < 0) {
- if (range_size > 0)
- break;
- } else {
- ++range_size;
- vref_min = min(vref_min, i);
- vref_max = max(vref_max, i);
- }
- }
-
- /* Pick average setting */
- ast2500_sdrammc_set_vref(info, (vref_min + vref_max + 1) / 2);
-
- return 0;
-}
-
-static size_t ast2500_sdrammc_get_vga_mem_size(struct dram_info *info)
-{
- size_t vga_mem_size_base = 8 * 1024 * 1024;
- u32 vga_hwconf = (readl(&info->scu->hwstrap) & SCU_HWSTRAP_VGAMEM_MASK)
- >> SCU_HWSTRAP_VGAMEM_SHIFT;
-
- return vga_mem_size_base << vga_hwconf;
-}
-
-/*
- * Find out RAM size and save it in dram_info
- *
- * The procedure is taken from Aspeed SDK
- */
-static void ast2500_sdrammc_calc_size(struct dram_info *info)
-{
- /* The controller supports 128/256/512/1024 MB ram */
- size_t ram_size = SDRAM_MIN_SIZE;
- const int write_test_offset = 0x100000;
- u32 test_pattern = 0xdeadbeef;
- u32 cap_param = SDRAM_CONF_CAP_1024M;
- u32 refresh_timing_param = DDR4_TRFC;
- const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset;
-
- for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
- ram_size >>= 1) {
- writel(test_pattern, write_addr_base + (ram_size >> 1));
- test_pattern = (test_pattern >> 4) | (test_pattern << 28);
- }
-
- /* One last write to overwrite all wrapped values */
- writel(test_pattern, write_addr_base);
-
- /* Reset the pattern and see which value was really written */
- test_pattern = 0xdeadbeef;
- for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
- ram_size >>= 1) {
- if (readl(write_addr_base + (ram_size >> 1)) == test_pattern)
- break;
-
- --cap_param;
- refresh_timing_param >>= 8;
- test_pattern = (test_pattern >> 4) | (test_pattern << 28);
- }
-
- clrsetbits_le32(&info->regs->ac_timing[1],
- (SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT),
- ((refresh_timing_param & SDRAM_AC_TRFC_MASK)
- << SDRAM_AC_TRFC_SHIFT));
-
- info->info.base = CONFIG_SYS_SDRAM_BASE;
- info->info.size = ram_size - ast2500_sdrammc_get_vga_mem_size(info);
- clrsetbits_le32(&info->regs->config,
- (SDRAM_CONF_CAP_MASK << SDRAM_CONF_CAP_SHIFT),
- ((cap_param & SDRAM_CONF_CAP_MASK)
- << SDRAM_CONF_CAP_SHIFT));
-}
-
-static int ast2500_sdrammc_init_ddr4(struct dram_info *info)
-{
- int i;
- const u32 power_control = SDRAM_PCR_CKE_EN
- | (1 << SDRAM_PCR_CKE_DELAY_SHIFT)
- | (2 << SDRAM_PCR_TCKE_PW_SHIFT)
- | SDRAM_PCR_RESETN_DIS
- | SDRAM_PCR_RGAP_CTRL_EN | SDRAM_PCR_ODT_EN | SDRAM_PCR_ODT_EXT_EN;
- const u32 conf = (SDRAM_CONF_CAP_1024M << SDRAM_CONF_CAP_SHIFT)
-#ifdef CONFIG_DUALX8_RAM
- | SDRAM_CONF_DUALX8
-#endif
- | SDRAM_CONF_SCRAMBLE | SDRAM_CONF_SCRAMBLE_PAT2 | SDRAM_CONF_DDR4;
- int ret;
-
- writel(conf, &info->regs->config);
- for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i)
- writel(ddr4_ac_timing[i], &info->regs->ac_timing[i]);
-
- writel(DDR4_MR46_MODE, &info->regs->mr46_mode_setting);
- writel(DDR4_MR5_MODE, &info->regs->mr5_mode_setting);
- writel(DDR4_MR02_MODE, &info->regs->mr02_mode_setting);
- writel(DDR4_MR13_MODE, &info->regs->mr13_mode_setting);
-
- for (i = 0; i < PHY_CFG_SIZE; ++i) {
- writel(ddr4_phy_config.value[i],
- &info->phy->phy[ddr4_phy_config.index[i]]);
- }
-
- writel(power_control, &info->regs->power_control);
-
- ast2500_ddr_phy_init_process(info);
-
- ret = ast2500_sdrammc_ddr4_calibrate_vref(info);
- if (ret < 0) {
- debug("Vref calibration failed!\n");
- return ret;
- }
-
- writel((1 << SDRAM_REFRESH_CYCLES_SHIFT)
- | SDRAM_REFRESH_ZQCS_EN | (0x2f << SDRAM_REFRESH_PERIOD_SHIFT),
- &info->regs->refresh_timing);
-
- setbits_le32(&info->regs->power_control,
- SDRAM_PCR_AUTOPWRDN_EN | SDRAM_PCR_ODT_AUTO_ON);
-
- ast2500_sdrammc_calc_size(info);
-
- setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_INIT_EN);
- while (!(readl(&info->regs->config) & SDRAM_CONF_CACHE_INIT_DONE))
- ;
- setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_EN);
-
- writel(SDRAM_MISC_DDR4_TREFRESH, &info->regs->misc_control);
-
- /* Enable all requests except video & display */
- writel(SDRAM_REQ_USB20_EHCI1
- | SDRAM_REQ_USB20_EHCI2
- | SDRAM_REQ_CPU
- | SDRAM_REQ_AHB2
- | SDRAM_REQ_AHB
- | SDRAM_REQ_MAC0
- | SDRAM_REQ_MAC1
- | SDRAM_REQ_PCIE
- | SDRAM_REQ_XDMA
- | SDRAM_REQ_ENCRYPTION
- | SDRAM_REQ_VIDEO_FLAG
- | SDRAM_REQ_VIDEO_LOW_PRI_WRITE
- | SDRAM_REQ_2D_RW
- | SDRAM_REQ_MEMCHECK, &info->regs->req_limit_mask);
-
- return 0;
-}
-
-static void ast2500_sdrammc_unlock(struct dram_info *info)
-{
- writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key);
- while (!readl(&info->regs->protection_key))
- ;
-}
-
-static void ast2500_sdrammc_lock(struct dram_info *info)
-{
- writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key);
- while (readl(&info->regs->protection_key))
- ;
-}
-
-static int ast2500_sdrammc_probe(struct udevice *dev)
-{
- struct reset_ctl reset_ctl;
- struct dram_info *priv = (struct dram_info *)dev_get_priv(dev);
- struct ast2500_sdrammc_regs *regs = priv->regs;
- int i;
- int ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
-
- if (ret) {
- debug("DDR:No CLK\n");
- return ret;
- }
-
- priv->scu = ast_get_scu();
- if (IS_ERR(priv->scu)) {
- debug("%s(): can't get SCU\n", __func__);
- return PTR_ERR(priv->scu);
- }
-
- clk_set_rate(&priv->ddr_clk, priv->clock_rate);
- ret = reset_get_by_index(dev, 0, &reset_ctl);
- if (ret) {
- debug("%s(): Failed to get reset signal\n", __func__);
- return ret;
- }
-
- ret = reset_assert(&reset_ctl);
- if (ret) {
- debug("%s(): SDRAM reset failed: %u\n", __func__, ret);
- return ret;
- }
-
- ast2500_sdrammc_unlock(priv);
-
- writel(SDRAM_PCR_MREQI_DIS | SDRAM_PCR_RESETN_DIS,
- ®s->power_control);
- writel(SDRAM_VIDEO_UNLOCK_KEY, ®s->gm_protection_key);
-
- /* Mask all requests except CPU and AHB during PHY init */
- writel(~(SDRAM_REQ_CPU | SDRAM_REQ_AHB), ®s->req_limit_mask);
-
- for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i)
- writel(ddr_max_grant_params[i], ®s->max_grant_len[i]);
-
- setbits_le32(®s->intr_ctrl, SDRAM_ICR_RESET_ALL);
-
- ast2500_sdrammc_init_phy(priv->phy);
- if (readl(&priv->scu->hwstrap) & SCU_HWSTRAP_DDR4) {
- ast2500_sdrammc_init_ddr4(priv);
- } else {
- debug("Unsupported DRAM3\n");
- return -EINVAL;
- }
-
- clrbits_le32(®s->intr_ctrl, SDRAM_ICR_RESET_ALL);
- ast2500_sdrammc_lock(priv);
-
- return 0;
-}
-
-static int ast2500_sdrammc_ofdata_to_platdata(struct udevice *dev)
-{
- struct dram_info *priv = dev_get_priv(dev);
- struct regmap *map;
- int ret;
-
- ret = regmap_init_mem(dev_ofnode(dev), &map);
- if (ret)
- return ret;
-
- priv->regs = regmap_get_range(map, 0);
- priv->phy = regmap_get_range(map, 1);
-
- priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
- "clock-frequency", 0);
-
- if (!priv->clock_rate) {
- debug("DDR Clock Rate not defined\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ast2500_sdrammc_get_info(struct udevice *dev, struct ram_info *info)
-{
- struct dram_info *priv = dev_get_priv(dev);
-
- *info = priv->info;
-
- return 0;
-}
-
-static struct ram_ops ast2500_sdrammc_ops = {
- .get_info = ast2500_sdrammc_get_info,
-};
-
-static const struct udevice_id ast2500_sdrammc_ids[] = {
- { .compatible = "aspeed,ast2500-sdrammc" },
- { }
-};
-
-U_BOOT_DRIVER(sdrammc_ast2500) = {
- .name = "aspeed_ast2500_sdrammc",
- .id = UCLASS_RAM,
- .of_match = ast2500_sdrammc_ids,
- .ops = &ast2500_sdrammc_ops,
- .ofdata_to_platdata = ast2500_sdrammc_ofdata_to_platdata,
- .probe = ast2500_sdrammc_probe,
- .priv_auto_alloc_size = sizeof(struct dram_info),
-};