net: sun8i_emac: Drop DM_GPIO checks
DM_GPIO is always enable in U-Boot proper for ARCH_SUNXI, and this
driver is never enabled in SPL, so the condition is always true.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 4ba9ee1..a12f7e3 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -168,9 +168,7 @@
struct clk ephy_clk;
struct reset_ctl tx_rst;
struct reset_ctl ephy_rst;
-#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
-#endif
struct udevice *phy_reg;
};
@@ -617,7 +615,6 @@
return ret;
}
-#if CONFIG_IS_ENABLED(DM_GPIO)
static int sun8i_mdio_reset(struct mii_dev *bus)
{
struct udevice *dev = bus->priv;
@@ -649,7 +646,6 @@
return 0;
}
-#endif
static int sun8i_mdio_init(const char *name, struct udevice *priv)
{
@@ -664,9 +660,7 @@
bus->write = sun8i_mdio_write;
snprintf(bus->name, sizeof(bus->name), name);
bus->priv = (void *)priv;
-#if CONFIG_IS_ENABLED(DM_GPIO)
bus->reset = sun8i_mdio_reset;
-#endif
return mdio_register(bus);
}
@@ -783,9 +777,7 @@
const fdt32_t *reg;
int node = dev_of_offset(dev);
int offset = 0;
-#if CONFIG_IS_ENABLED(DM_GPIO)
int reset_flags = GPIOD_IS_OUT;
-#endif
int ret;
pdata->iobase = dev_read_addr(dev);
@@ -872,7 +864,6 @@
printf("%s: Invalid RX delay value %d\n", __func__,
sun8i_pdata->rx_delay_ps);
-#if CONFIG_IS_ENABLED(DM_GPIO)
if (fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
"snps,reset-active-low"))
reset_flags |= GPIOD_ACTIVE_LOW;
@@ -887,7 +878,6 @@
} else if (ret == -ENOENT) {
ret = 0;
}
-#endif
return 0;
}