ARM: cpu: at91: clean up peripheral clock code
Due to introducing the new peripheral clock handle functions,
use these functions to clean up the duplicated code.
Meanwhile, remove unneeded header file include, at91_pmc.h.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fixup for arm920t code]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
index a445c75..4bd4e75 100644
--- a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
@@ -9,7 +9,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
/*
@@ -29,51 +29,40 @@
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */
- writel(1 << ATMEL_ID_USART0, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_USART0);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */
- writel(1 << ATMEL_ID_USART1, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_USART1);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */
- writel(1 << ATMEL_ID_USART2, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_USART2);
}
void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
- writel(1 << ATMEL_ID_SYS, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_SYS);
}
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
- /* Enable clock */
- writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_SPI0);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
@@ -103,14 +92,11 @@
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */
- /* Enable clock */
- writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
+ at91_periph_clk_enable(ATMEL_ID_SPI1);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 28, 1);