* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 4b27c77..41f84fd 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -98,7 +98,7 @@
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
case 2:
- if (strcmp(argv[1],"info") == 0) {
+ if (strcmp(argv[1],"info") == 0) {
int i;
putc ('\n');
@@ -376,7 +376,7 @@
return 0;
}
-
+
/* print bad blocks in NAND flash */
static void nand_print_bad(struct nand_chip* nand)
{
@@ -473,7 +473,7 @@
nand->totlen >> 20, nand->erasesize >> 10);
}
else {
- printf("%s at 0x%lx (", nand->chips_name, nand->IO_ADDR);
+ printf("%s at 0x%lx (", nand->chips_name, nand->IO_ADDR);
print_size(nand->totlen, ", ");
print_size(nand->erasesize, " sector)\n");
}
@@ -599,7 +599,7 @@
id = READ_NAND(nand->IO_ADDR);
- NAND_DISABLE_CE(nand); /* set pin high */
+ NAND_DISABLE_CE(nand); /* set pin high */
/* No response - return failure */
if (mfr == 0xff || mfr == 0) {
printf("NanD_Command (ReadID) got %d %d\n", mfr, id);
@@ -806,7 +806,7 @@
goto readdata;
/* Send the read command */
NanD_Command(nand, NAND_CMD_READ0);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
+ NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
/* Read in a page + oob data */
NanD_ReadBuf(nand, nand->data_buf, nand->oobblock + nand->oobsize);
@@ -873,7 +873,7 @@
#else
/* Send the read command */
NanD_Command(nand, NAND_CMD_READ0);
- NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
+ NanD_Address(nand, ADDR_COLUMN_PAGE, (page << nand->page_shift) + col);
/* Read the data directly into the return buffer */
if ((*retlen + (nand->oobblock - col)) >= len) {
NanD_ReadBuf(nand, buf + *retlen, len - *retlen);
@@ -1136,11 +1136,11 @@
*retlen = len;
/* Reading the full OOB data drops us off of the end of the page,
- * causing the flash device to go into busy mode, so we need
- * to wait until ready 11.4.1 and Toshiba TC58256FT nands */
+ * causing the flash device to go into busy mode, so we need
+ * to wait until ready 11.4.1 and Toshiba TC58256FT nands */
ret = NanD_WaitReady(nand);
- NAND_DISABLE_CE(nand); /* set pin high */
+ NAND_DISABLE_CE(nand); /* set pin high */
return ret;
@@ -1244,7 +1244,7 @@
if (ofs & (nand->erasesize-1) || len & (nand->erasesize-1)) {
printf ("Offset and size must be sector aligned, erasesize = %d\n",
- (int) nand->erasesize);
+ (int) nand->erasesize);
return -1;
}